Measurement of automotive nonvolatile particle number emissions within the European legislative framework: A review

Aerosol Science and Technology

Volumn 46, Issue 7, 2012, Pages 719-749

  Giechaskiel, Barouch ^a   Mamakos, Athanasios ^b   Andersson, Jon ^c   Dilara, Panagiota ^b   Martini, Giorgio ^b   Schindler, Wolfgang ^a   Bergmann, Alexander ^a  

^a AVL LIST GMBH   (Austria)

^b JOINT RESEARCH CENTRE   (Italy)

^c RICARDO UK LTD   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

AFTER-TREATMENT; CALIBRATION UNCERTAINTY; CORRELATION MEASUREMENT; DIESEL PARTICULATE FILTERS; DILUTION SYSTEMS; ELEMENTAL CARBON; EUROPEAN COMMISSION; FILTER-BASED; LIGHT DUTY VEHICLES; MEASUREMENT PROCEDURES; NON-VOLATILE; PARTICLE NUMBER EMISSION; PARTICLE NUMBERS; PARTICULATE MATTER; PN METHOD; REPRODUCIBILITIES;

LAWS AND LEGISLATION;

VEHICLES;

ACCURACY; AIR SAMPLER; AIR SAMPLING; AUTOMOTIVE NONVOLATILE PARTICLE NUMBER EMISSION; CALIBRATION; CATALYST; CONCENTRATION (PARAMETERS); CONSTANT VOLUME SAMPLER; EVAPORATION; EXHAUST GAS; FILTRATION; GAS ANALYSIS; LABORATORY TEST; LIMIT OF DETECTION; MATHEMATICAL MODEL; MEASUREMENT ERROR; OXIDATION; PARTIAL FLOW DILUTION SYSTEM; POLLUTION MONITORING; PRIORITY JOURNAL; PROCESS DESIGN; REVIEW; SOLVENT EXTRACTION;

EID: 84859927898     PISSN: 02786826     EISSN: 15217388     Source Type: Journal    
DOI: 10.1080/02786826.2012.661103     Document Type: Review

References (200)

1. ACEA (1999). ACEA Programme on Emissions of Fine Particles from Passenger Cars, December 1999. ACEA, Brussels, Belgium.
2. Amann, C., Stivender, D., Plee, S., andMacDonald, J. (1980). Some Rudiments of Diesel Particulate Emissions. SAE Technical Paper 800251.
3. Andersson, J., and Clarke, D. (2004). UN-GRPE PMP Phase 3: Interlaboratory Correlation Exercise: Framework and Laboratory Guide. Available at: http://www.unece.org/trans/doc/2005/wp29grpe/PMP-2005-14-01e.pdf
4. Andersson, J., Clarke, D., and Watson, J. (2004). UK Particulate Measurement Programme (PMP): A Near US 2007 Approach to Heavy-Duty Diesel Particulate Measurements-Comparison with the Standard European Method. SAE Technical Paper 2004-01-1990.
5. Andersson, J., Giechaskiel B., Munoz-Bueno, R., and Dilara, P. (2007). Particle Measurement Programme (PMP): Light-Duty Inter- Laboratory Correlation Exercise (ILCE LD)-Final Report (EUR 22775 EN) GRPE-54-08-Rev.1. Available at: http://publications.jrc.ec.europa.eu/ repository/bitstream/111111111/429/2/ 7386%20-%20PMP LD final.pdf
6. Andersson, J., Mamakos, T., Martini, G., and Giechaskiel, B. (2010). Particle Measurement Programme (PMP) Heavy-Duty Inter-Laboratory Correlation Exercise (ILCE HD) Final Report. Available at: http://publications.jrc.ec. europa.eu/repository/bitstream/111111111/15075/1/pmp%20hd%20valida tion%20exercise%20final%20report.pdf
7. Andersson, J., Wedekind, B., Hall, D., Stadling, R., and Wilson G. (2001). DETR/SMMT/CONCAWE Particulate Research Programme: Light Duty Results. SAE Technical Paper 2001-01-3577.
8. Bagley, S., Baumgard, K., Gratz, L., Johnson, J., and Leddy, D. (1996). Characterization of Fuel and Aftertreatment Device Effects on Diesel emissions. Research Report No. 76. HEI, September 1996.
9. Berg, W. (2003). Legislation for the Reduction of Exhaust Gas Emissions, in Handbook of Environment Chemistry, 3(Part T), Series Anthropogenic Compounds, Traffic and Environment, Springer, pp 175-253.
10. Bergmann, M.,Kirchner, U.,Vogt,R., andBenter, T. (2009).On-Road and Laboratory Investigation of Low-Level PM Emissions of aModern Diesel Particulate Filter EquippedDiesel Passenger Car. Atmos. Environ., 43:1908-1916.
11. Bérubé, K., Jones, T., Williamson, B., Winters, C., Morgam, A., and Richards, R. (1999). Physicochemical Characterization of Diesel Exhaust Particles: Factors for Assessing Biological Activity. Atmos. Environ., 33:1599-1614. (Pubitemid 29125520)
12. Bikas, G., and Zervas, E. (2007). Regulated and Non-Regulated Pollutants Emitted During theRegeneration of a Diesel Particulate Filter. Energy Fuels, 21:1543-1547. (Pubitemid 46929374)
13. Biswas, S., Verma, V., Schauer, J., Cho A., and Sioutas, K. (2009a). Oxidative Potential of Semi-Volatile and Non Volatile Particulate Matter (PM) from Heavy-Duty Vehicles Retrofitted with Emission Control Technologies. Environ. Sci. Technol., 43:3905-3912.
14. Biswas, S.,Verma,V., Schauer, J., and Sioutas,K. (2009b). Chemical Speciation of PM Emissions from Heavy-Duty Diesel Vehicles Equipped with Diesel Particulate Filter (DPF) and Selective Catalytic Reduction (SCR) Retrofits. Atmos. Environ., 43:1917-1925.
15. Bosteels, D., May, J., Karlsson, H., and de Serves, C. (2006). Regulated and Non-Regulated Emissions from Modern European Passenger Cars. SAE Techincal Paper 2006-01-1516.
16. Braisher, M., Stone, R., and Price, P. (2010). Particle Number Emissions from a Range of European Vehicles. SAE Technical Paper 2010-01-0786.
17. Braun, A., Huggins, F., Seifert, S., Ilavsky, J., Shah, N., Kelly, K., et al. (2004). Size-Range Analysis of Diesel Soot with Ultra-Small Angle X-Ray Scattering. Combust. Flame, 137:63-72. (Pubitemid 38402252)
18. Burtscher, H. (2005). Physical Characterization of Particulate Emissions from Diesel Engines: A Review. J. Aerosol Sci., 36:896-932.
19. Campbell, B., Peckham, M., Symonds, J., Parkinson, J., and Finch, A. (2006). Transient Gaseous and Particulate Emissions Measurements on a Diesel Passenger Car Including DPF Regeneration. SAE Technical Paper 2006-01- 1079.
20. CARB (2010). California Air Resource Board Public Workshop on Proposed Revisions to the Low-Emission Vehicle Program: Emission Limits for Particle Mass, Solid Particle Number, and Black Carbon. Available at: http://www.arb.ca.gov/msprog/levprog/leviii/meetings/051810/lev iii pm and bc v2.pdf, http://www.arb.ca.gov/msprog/levprog/leviii/meetings/1116 10/leviii pm update for nov 16 workshop.pdf
21. Casati, R., Scheer, V., Vogt, R., and Benter, T. (2007). Measurement of Nucleation and Soot Mode Particle Emission from a Diesel Passenger Car in Real World and Laboratory In Situ Dilution. Atmos. Environ., 41:2125-2135. (Pubitemid 46240997)
22. Chase, R., Duszkiewicz, G., Richert, J., Lewis, D., Matti, M., and Xu, N. (2004). PM Measurement Artifact: Organic Vapor Deposition on Different Filter Media. SAE Technical Paper 2004-01-0967.
23. Cheung, K., Andrea, P., Ntziachristos, L., Samaras, Z., Cassee, F., Gerlofs, M., et al. (2009). Chemical Characteristics andOxidative Potential of Particulate Matter Emissions from Gasoline, Diesel, and Biodiesel Cars. Environ. Sci. Technol., 43:6334-6340.
24. Collings, N., and Graskow, B. (2000). Particles from Internal Combustion Engines - What We Need to Know. Phil. Trans. R. Soc. Lond. A, 358:2611-2623.
25. Ciambelli, P., Palma, V., Russo, P., and Vaccaio, S. (2005). Issues on Soot Removal from Exhaust Gases by Means of Radial Flow Ceramic Traps. Chem. Eng. Sci., 60:1619-1627.
26. Commission Regulation 692/2008. Available at: http://eurlex.europa.eu/ LexUriServ/LexUriServ.do?uri=CELEX:32008R0692:en:NOT
27. Commission Regulation 715/2007. Available at: http://eur-lex.europa.eu/ LexUriServ/LexUriServ.do?uri=OJ:L:2007:171:0001:0016:EN:PDF
28. CONCAWE 1998. A Study of the Number, Size & Mass of Exhaust Particles Emitted from European Diesel and Gasoline Vehicles Under Steady- State and European Driving Cycle Conditions. Report no. 98/51, Brussels, Belgium.
29. Copert (2007). COPERT 4 Computer Programme to Calculate Emissions from Road Transport-Users Manual, ETC-ACC (European Topic Centre on Air and Climate Change). Available at: http://www.emisia.com/ documentation.html
30. Czerwinski, J., Zimmerli, Y., Mayer, A., Heeb, N., Lemaire, J., D'Urbano, G., et al. (2009). Testing of Combined DPF+SCR Systems for HD-Retrofitting- VERTdePN. SAE Technical Paper 2009-01-0284.
31. De Fillipo, A., and Maricq, M. (2008). Diesel Nucleation Mode Particles: Semivolatile or Solid? Environ. Sci. Technol., 42:7957-7962.
32. Dekati (2010). Dekati Engine Exhaust Diluter (DEED). Available at: http:// www.dekati.com/cms/deed
33. Deutsche Umwelthilfe (2011). Press Release. Available at: http://www.duh.de/ uploads/media/Benzinmotoren-Partikel 2011-07-07.pdf
34. di Stasio, S., Konstandopoulos, A., and Kostoglou, M. (2002). Cluster-Cluster Aggregation Kinetics and Primary Particle Growth of Soot Nanoparticles in Flame by Light Scattering and Numerical Simulations. J. Colloid Interface Sci., 247:33-46. (Pubitemid 34959972)
35. DieselNet (2003). Emission Standards, Switzerland. Available at: http://www. dieselnet.com/standards/ch/#const
36. Donaldson, K., Li, X., and MacNee, W. (1998). Ultrafine (Nanometre) Particle Mediated Lung Injury. J. Aerosol Sci., 29:553-560. (Pubitemid 28263562)
37. Dwyer, H., Ayala, A., Zhang, S., Collins, J., Huai, T., Herner, J., et al. (2010). Emissions from a Diesel Car During Regeneration of an Active Diesel Particulate Filter. J. Aerosol Sci. 41:541-552.
38. Eastwood, P. (2008). Particulate Emissions from Vehicles. SAE International and John Wiley & Sons, Ltd., West Sussex. UK.
39. Ecomesure (2010). RS-PMP, Real-Time Particle Counting for Engine Exhaust. Available at: www.ecomesure.com
40. PS (2005). Engine Exhaust Particle SizerTMSpectrometer Model 3090. Available at: http://www.tsi.com/en-1033/products/2208/engine exhaust particle sizer%E2%84%A2 spectrometer.aspx
41. EPA (2009). Integrated Science Assessment for Particulate Matter (Final Report). U.S. Environmental Protection Agency, Washington, DC, EPA/600/R-08/139F, 2009. Available at: http://cfpub.epa.gov/ncea/cfm/ recordisplay.cfm?deid=216546#Download
42. EPA (2011). Environmental Protection Agency, Part 1065 - Engine Testing Procedures, Title 40 - Protection of Environment. Code of Federal Regulations.
43. Ferin, J., Oberdörster, G., and Penney, D. (1992). Pulmonary Retention of Ultrafine and Fine Particles in Rats. Am. J. Respir. Cell Mol. Biol., 6:535-542.
44. Fletcher, R., Mulholland, G., Winchester, M., King, R., and Klinedinst, D. (2009). Calibration of a Condensation Particle Counter Using a NIST Traceable Method. Aerosol Sci. Technol. 43:425-441.
45. Gidney, J., Twigg, M., and Kittelson, D. (2010). Effect of Organometalic Fuel Additives on Nanoparticle Emissions from a Gasoline Passenger Car. Environ. Sci. Technol. 44:2562-2569.
46. Giechaskiel, B., and Bergmann, A. (2011).Validation of 14Used, Re-Calibrated and New TSI 3790 Condensation Particle Counters According to the UNECE Regulation 83. J. Aerosol Sci. 42:195-203.
47. Giechaskiel, B., and Bergmann, A. (2012). On-Site Checks of the Particle Number Measurement Systems with Polydisperse Aerosol. SAE Technical Paper 2012-01-0873.
48. Giechaskiel, B., and Stilianakis,N. (2009).ANote on the Comparison of Particle Number Counters. Meas. Sci. Technol. 20:077003.
49. Giechaskiel, B., Carriero, M., Martini, G., and Andersson, J.,(2009a). Heavy Duty Particle Measurement Programme (PMP): Exploratory Work for the Definition of the Test Protocol. SAE Technical Paper 2009-01-1767.
50. Giechaskiel, B., Carriero, M., Martini, G., Bergmann, A., Pongratz, H., and Jörgl, H. (2010b). Comparison of Particle Number Measurements from the Full Dilution Tunnel, the Tailpipe and Partial Flow Systems. SAE Technical Paper 2010-01-1299.
51. Giechaskiel, B., Carriero, M., Martini, G., Krasenbrink, A., and Scheder, D. (2009c). Calibration andValidation ofVarious Commercial Particle Number Measurement Systems. SAE Technical Paper 2009-01-1115.
52. Giechaskiel, B., Chirico, R., DeCarlo, P., Clairotte, M., Adam, T., Martini, G., et al. (2010a). Evaluation of the Particle Measurement Programme (PMP) Protocol to Remove the Vehicles' Exhaust Aerosol Volatile Phase. Sci. Total Environ., 408:5106-5116.
53. Giechaskiel, B., Cresnoverh,M., Jörgl, H., and Bergmann, A. (2010c). Calibration and Accuracy of a Particle Number Measurement System. Meas. Sci. Technol. 21:045102.
54. Giechaskiel, B., Dilara, P., and Andersson, J.(2008a). Particle Measurement Programme (PMP) Light-Duty Inter-Laboratory Exercise: Repeatability and Reproducibility of the Particle Number Method. Aerosol Sci. Technol. 42:528-543. (Pubitemid 351919834)
55. Giechaskiel, B., Dilara, P., Sandbach, E., and Andersson, J.,(2008b). Particle Measurement Programme (PMP) Light-Duty Inter-Laboratory Exercise: Comparison of Different Particle Number Measurement Systems. Meas. Sci. Technol. 19:095401.
56. Giechaskiel, B., Martinez-Lozano, P., Alessandrini, S., Forni, F., Montigny, F., Fumagalli, I., et al. (2008c). Particle Measurement Programme (PMP) Heavy Duty (HD) Inter-Laboratory Exercise: Validation Exercise Tests at JRC (Feb 08). EU Report 23496.
57. Giechaskiel, B., Massimo, C., Bonnel, P., Schindler, W., Scheder, D., Bassoli, C., et al. (2011a). PEMS Feasibility of Particulate Mass and Number Measurement with Portable Emission Measurement Systems (PEMS) for In-Use Testing. SAE Technical Paper 2011-24-0199.
58. Giechaskiel, B., Munoz-Bueno, R., Rubino, L., Manfredi, U., Dilara, P., De Santi, G., et al. (2007b). Particle Measurement Programme (PMP): Particle Size and Number Emissions Before, During and After Regeneration Events of a Euro 4 DPF Equipped Light-Duty Diesel Vehicle. SAE Technical Paper 2007-01-1944.
59. Giechaskiel, B., Ntziachristos, L., and Samaras, Z. (2004). Calibration and Modeling of Ejector Dilutors for Automotive Exhaust Sampling, Meas. Sci. Technol. 15:2199-2206. (Pubitemid 39500798)
60. Giechaskiel, B., Ntziachristos, L., Samaras, Z., Casati, R., Scheer, V., and Vogt, R. (2005). Formation Potential of Vehicle Exhaust Nucleation Mode Particles On-Road and in the Laboratory. Atmos. Environ., 39:3191-3198.
61. Giechaskiel, B., Ntziachristos, L., Samaras, Z.,Casati, R.,Volker, S., andRainer, V. (2007a). Effect of Speed and Speed Transition on the Formation of NucleationMode Particles from a Light Duty DieselVehicle. SAE Technical Paper 2007-01-1110.
62. Giechaskiel, B., Schindler, W.,Jörgl, H., Vescoli, V., Bergmann, A., and Silvis, W. (2011b). Accuracy of Particle Number Measurements from Partial Flow Dilution Systems. SAE Technical Paper 2011-24-0207.
63. Giechaskiel, B., Wang, X., Horn, H., Spielvogel, J., Gerhart, C., Southgate, J., et al. (2009b). Calibration of Condensation Particle Counters for Legislated Vehicle Number Emission Measurements. Aerosol Sci. Technol. 43:1164-1173.
64. Gilham, R., and Quincey, P. (2007). Particle Measurement Programme-Analysis of Errors. National Physical Laboratory (NPL) Report AS 17.
65. Graskow, B., Kittelson, D., Ahmadi,M., andMorris, J. (1999). Exhaust Particulate Emissions from a Direct Injection Spark Ignition Engine. SAE Technical Paper 1999-01-1145.
66. Grimm (2009). Nano PMP 5.430. Available at: www.grimm-aerosol.com
67. Guo, G., Xu, N., Laing, P., Hammerle, R., and Maricq, M. (2003). Performance of a Catalyzed Diesel Particulate Filter System During Soot Accumulation and Regeneration. SAE Technical Paper 2003-01-0047.
68. Hall, D., and Dickens, C. (1999). Measurement of the Number and Size Distribution of Particles Emitted from a Gasoline Direct Injection Vehicle. SAE Technical Paper 1999-01-3530.
69. Harris, S., and Maricq, M. (2001). Signature Size Distributions for Diesel and Gasoline Engine Exhaust Particle Matter. J. Aerosol Sci. 32:749-764. (Pubitemid 32401580)
70. Harris, S., and Maricq, M. (2002). The Role of Fragmentation in Defining the Signature Size Distribution of Diesel Soot. J. Aerosol Sci. 33:935-942. (Pubitemid 34497058)
71. Herner, J., Hu, S., Robertson, W., Huai, T., Chang, O., Rieger, P., et al. (2011). Effect of Advanced Aftertreatment for PM and NOx Reduction on Heavy Duty Diesel Engine Ultrafine Particle Emissions. Environ. Sci. Technol. 45:2413-2419.
72. Herner, J., Robertson, W., and Ayala, A. (2007). Investigation of Ultrafine Particle Number Measurements from a Clean Diesel Truck Using the European PMP Protocol. SAE Technical Paper 2007-01-1114.
73. Hosoya, M., Kawada, Y., Sato, S., and Shimoda, M. (2007). The Study of NOx and PM Reduction Using Urea Selective Catalytic Reduction System for Heavy Duty Diesel Engine. SAE Technical Paper 2007-01-1576.
74. Hu, S., Herner, J., Shafer, M., Robertson, W., Schauer, J., Dwyer, H., et al. (2009). Metals Emitted from Heavy-Duty Diesel Vehicles Equipped with AdvancedPMandNOx Emission Controls. Atmos. Environ., 43:2950-2959.
75. Hueglin, C., Scherrer, L., and Burtscher, H. (1997). An Accurate Continuously Adjustable Dilution System (1:10 to 1:104) for Submicron Aerosols. J. Aerosol Sci., 28:1049-1055. (Pubitemid 27312063)
76. Isella, L., Giechaskiel, B., and Drossinos, Y.,(2008). Diesel-Exhaust Aerosol Dynamics from the Tailpipe to the Dilution Tunnel. J. Aerosol Sci., 39:737-758.
77. Jing, L. (2010). CAST Combustion Aerosol Standard. Available at: www. sootgenerator.com/
78. Johnson, K. C., Durbin, T. D., Jung, H., Chaudhary, A., Cocker, D. R., Herner, J. D., et al. (2009). Evaluation of the European PMP Methodologies During On-Road and ChassisDynamometer Testing for DPF EquippedHeavy-Duty Diesel Vehicles. Aerosol Sci. Technol., 43:962-969.
79. Karlsson H. (2005). Measurement of Emissions from Four Diesel Fuelled Passenger Cars Meeting Euro 4 Emission Standards. Report No. MTC 5505, AVL MTC AB, 2005/10, Haninge, Sweden.
80. Kasper, M. (2004). The Number Concentration of Non-Volatile Particles-Design Study for an Instrument According to the PMP Recommendations. SAE Technical Paper Technical Paper 2004-01-0960.
81. Kasper, M. (2008). Characterisation of the Second Generation PMP "Golden Instrument." SAE Technical Paper 2008-01-1177.
82. Kayes, D., and Hochgreb S. (1999). Mechanisms of Particulate Matter Formation in Spark-Ignition Engines. 1. Effect of Engine Operating Conditions. Environ. Sci. Technol. 33:3957-3967. (Pubitemid 29535919)
83. Khalek I. (2009). CRC Report: ACES Phase 1: Phase 1 of the Advanced Collaborative Emissions Study, June 2009.
84. Khalek, I., and Kittelson, D. (1995). Real Time Measurement of Volatile and Solid Exhaust Particles Using a Catalytic Stripper. SAE Technical Paper 950236.
85. Khalek, I., Bougher, T., and Jetter, J.(2010). Particle Emissions from a 2009 Gasoline Direct Injection Engine Using Different Commercially Available Fuels. SAE Technical Paper 2010-01-2117.
86. Khalek, I., Kittelson, D., and Brear, F. (1999). The Influence of Dilution Conditions on Diesel Exhaust Particle Size Distribution Measurements. SAE Technical Paper 1999-01-1142.
87. Khalek, I., Kittelson, D., Graskow, B., Wei, Q., and Brear, F. (1998). Diesel Exhaust Particle Size: Measurements, Issues and Trends. SAE Technical Paper 980525.
88. Kirchner U., Vogt, R., andMaricq,M. (2010). Investigation of EURO-5/6 Level Particle Number Emissions of European Diesel Light Duty Vehicles. SAE Technical Paper 2010-01-0789.
89. Kirchner, U., Scheer, V., Vogt, R., and Kägi, R. (2009). TEM Study on Volatility and Potential Presence of Solid Cores in Nucleation Mode Particles from Diesel Powered Passenger Cars. Atmos. Environ., 40:55-64.
90. Kittelson D. (1998). Engines and Nanoparticles: A Review. J. Aerosol Sci., 29:575-588.
91. Kittelson D., and Johnson J. (1991). Variability in Particle Emission Measurements in the Heavy Duty Transient Test. SAE Technical Paper 910738.
92. Kittelson, D., Reinertsen, J., and Michalski, J. (1991). Further Studies of Electrostatic Collection and Agglomeration of Diesel Particles. SAE Technical Paper 910329.
93. Kittelson, D., Watts, W., and Johnson, J. (2002). Diesel Aerosol Sampling Methodology, 2002, Univ. Minnesota. Final Report No CRC-E43.
94. Kittelson, D., Watts, W., and Johnson, J. (2006a). On-Road and Laboratory Evaluation of Combustion Aerosols. Part 1: Summary of Diesel Engine Results. J. Aerosol Sci., 37:913-930.
95. Kittelson, D., Watts, W., Johnson, J., Schauer, J., and Lawson, D. (2006b). On- Road and Laboratory Evaluation of Combustion Aerosols Part 2: Summary of Spark Ignition Engine Results. J. Aerosol Sci., 37:931-949.
96. Kittelson, D., Watts, W., Johnson, J., Thorne, C., Higham, C., Payne, M., et al. (2008). Effect of Fuel and Lube Oil Sulfur on the Performance of a Diesel Exhaust Gas Continuously Regenerating Trap. Environ. Sci. Technol., 42:9276-9282.
97. Kittelson, D., and Franklin, L. (2010). Nanoparticle Emissions from an Ethanol Fueled HCCI Engine, Cambridge Particle Meeting, May 21, 2010, Cambridge, UK.
98. Koch,W., Lödding, H.,Mölter,W., andMunzinger, F. (1988). Verdünnungssystem für die Messung hochkonzentrierter Aerosole mit optischen Partikelzählern Staub. Reinhalt. der Luft, 48:341-344.
99. Konstandopoulos, A., and Papaioannou, E. (2008). Update on The Science and Technology of Diesel Particulate Filters. KONA Powder and Part. J., 26:36-65.
100. Lähde, T., Rönkkö, T., Virtanen, A., Schuck, T. J., Pirjola, L., Hämeri, K., et al. (2009). Heavy Duty Diesel Engine Exhaust Aerosol Particle and Ion Measurements. Environ. Sci. Technol. 43:163-168.
101. Lee, C., Oh, K., Kim, D., and Lee, C. (2007). A Characteristic of Particle Number Distribution for the Urea Solution Injection to Urea SCR System of Commercial Diesel Engine for an Emission Regulation. SAE Technical Paper 2007-01-3455.
102. Lovik, M., Hogseth, A. K., Gaarder, P., Hagemann, R., and Eide, I. (1997). Diesel Exhaust Particles and Carbon Black Have Adjuvant Activity on the Local Lymph Node Response and Systemic IgE Production to Ovalbumin. Toxicology 121:165-178. (Pubitemid 27273790)
103. MacDonald, J., Barsic, N., Gross, G., Shaded, S., and Johnson J. (1984). Status of Diesel Particulate Measurement Methods. SAE Technical Paper 840345.
104. Maha (2010). Particle Counter SPC 8000. Available at: http://www.mahaaip. de/english/spc8000.aspx
105. Majewski,W., and Khair, M. (2006). Diesel Emissions and Their Control. SAE International, Warrendale, PA.
106. Mamakos, A., Carriero, M., Bonnel, P., Demircioglu, H., Douglas, K., Alessandrini, S., et al. (2011d). EU-PEMS PM Evaluation Program-Second Report-Study on Post DPF PM/PN Emissions, EUR 24793.
107. Mamakos, A., Dardiotis, C., Marotta, A., Martini, G., Manfredi, U., Colombo, R., et al. (2011b). Particle Emissions from a Euro 5a Certified Diesel Passenger Car, EUR 24855 EN.
108. Mamakos, A., Dardiotis, C., Martini, G., and Krasenbrink, A. (2011c). Assessment of Particle Number Limits for PetrolVehicles. EUReport.Available at: http://circa.europa.eu/Public/irc/enterprise/automotive/library?l=/mveg ve hicle emissions/107th january 2011&vm=detailed&sb=Title
109. Mamakos, A., Dardiotis, C., Martini, G., Perujo, A., Marotta, A., and Manfredi, U. (2011a). Measurements of Sub 23 nm Particles Emitted from Late Technology Passenger Cars, using a PMP Compliant Volatile Particle Remover. 16th ETH-Conference on Combustion Generated Nanoparticles, June 24-27, Zurich, Switzerland.
110. Mamakos, A., Ntziachristos, L., and Samaras Z. (2004). Comparability of Particle Emission Measurements Between Vehicle Testing Laboratories: A Long Way to Go. Meas. Sci. Technol. 15:1855-1866. (Pubitemid 39443975)
111. Maricq, M. (2007). Chemical Characterization of Particulate Emissions from Diesel Engines: A Review, J. Aerosol Sci. 38:1079-1118.
112. Maricq, M., Chase, R., Podsiadlik, D., and Vogt, R. (1999c). Vehicle Exhaust Particle Size Distributions: A Comparison of Tailpipe and Dilution Tunnel Measurements. SAE Technical Paper 1999-01-1461.
113. Maricq, M., Chase, R., Xu, N., and Laing P. (2002). The Effects of the Catalytic Converter and Fuel Sulfur Level on Motor Vehicle Particulate Matter Emissions: Light Duty Diesel Vehicles. Environ. Sci. Technol. 36:283-289. (Pubitemid 34072637)
114. Maricq,M., Podsiadlik, D., Brehob, D., and Haghgooie, M. (1999a). Particulate Emissions from a Direct-Injection Spark Ingnition (DISI) Engine. SAE Technical Paper 1999-01-1530.
115. Maricq, M., Podsiadlik, D., and Chase, R. (1999b). Gasoline Vehicle Particle Size Distributions: Comparison of Steady State, FTP, and US06 Measurements. Environ. Sci. Technol. 33:2007-2015. (Pubitemid 29288963)
116. Maricq, M., Podsiadlik, D., and Chase, R. (1999d). Examination of the Size- Resolved and Transient Nature of Motor Vehicle Particle Emissions. Environ. Sci. Technol. 33:1618-1626. (Pubitemid 29232893)
117. Maricq, M., Szente, J., Loos, M., and Vogt, R. (2011). Motor Vehicle PM Emissions Measurement at LEV III Levels. SAE Technical Paper 2011-01- 0623.
118. Maricq, M., and Xu, N. (2004). The Effective Density and Fractal Dimension of Soot Particles from Premixed Flames andMotor Vehicle Exhaust. J. Aerosol Sci. 35:1251-1274. (Pubitemid 39314399)
119. Marshall, I., and Sandbach, E. (2007). Particle Number Counter Calibration/ Validation procedures. Report to the Department for Transport. Available at: http://www.unece.org/trans/doc/2008/wp29grpe/PMP-21-07e.pdf
120. Martini, G., Giechaskiel, B., and Dilara, P. (2009). Future European Emission Standards for Vehicles: The Importance of the UN-ECE Particle Measurement Programme, Biomarkers 14(S1):29-33.
121. Mathis, U., Mohr, M., and Forss A. (2005). Comprehensive Particle Characterization of Modern Gasoline and Diesel Passenger Cars at Low Ambient Temperatures. Atmos. Environ., 39:107-117. (Pubitemid 39572229)
122. Mathis, U., Mohr, M., Ristimäki, J., Keskinen, J., Ntziachristos, L., Samaras, Z., et al. (2004). Sampling Conditions for the Measurement of Nucleation Mode Particles in the Exhaust of a Diesel Vehicle. Aerosol Sci. Technol. 38:1149-1160. (Pubitemid 40075868)
123. May J. (2011). Particulate Emissions from Typical Light-Duty Vehicles Taken from the European Fleet Equippedwith aVariety of Emissions Control Technologies. 15th ETH Conference on Combustion Generated Nanoparticles, June 26-29, Zürich, Switzerland.
124. May, J., Bosteels, D., Such, C., Nicol, A., and Andersson, J. (2008). Heavy Duty Engine Particulate Emissions: Application of PMP Methodology to Measure Particle Number and Particulate Mass. SAE Technical Paper 2008-01- 1176.
125. Mayer, A., Czerwinski, J., Matter, U., Wyser, M., Scheidegger, G., Kieser, D., et al. (1998). VERT: Diesel Nano-Particulate Emissions: Properties and Reduction Strategies. SAE Technical Paper 980539.
126. Mayer, A., Matter, U., Scheidegger, G., Czerwinski, J., Wyser, M., Kieser, D., et al. (1999). Particulate Traps for Retro-Fitting Construction Site Engines VERT: Final Measurement and Implementation. SAE Technical Paper 1999- 01-0116.
127. Mayer, A., Ulrich, A., Czerwinski, J., and Mooney, J. (2010). Metal-Oxide Particles in Combustion Engine Exhaust. SAE Technical Paper 2010-01- 0792.
128. Mohr, M. (2008). Future High-Confidence Measurement of Diesel Particulate Emissions for Approval and Development. 5th International Exhaust Gas and Particulate Emissions Forum, February 19-20, 2008, Ludwigsburg, Germany.
129. Mohr, M., Forss, A., and Lehmann, U. (2006). Particle Emissions from Diesel Passenger Cars Equipped with a Particle Trap in Comparison to Other Technologies. Environ. Sci. Technol. 40:2375-2383.
130. Mohr, M., Forss, A., and Steffen, D. (2000). Particulate Emissions of Gasoline Vehicles and Influence of the Sampling Procedure. SAE Technical Paper 2000-01-1137.
131. Mohr, M., Lehmann, U., and Margaria, G. (2003a). ACEA Programme on the Emissions of Fine Particulates from Passenger Cars (2): Part 1: Particle Characterisation of a Wide Range of Engine Technologies. SAE Technical Paper 2003-01-1889.
132. Mohr, M., Lehmann, U., and Margaria, G. (2003b). ACEA Programme on the Emissions of Fine Particulates from Passenger Cars (2): Part 2: Effect of Sampling Conditions and Fuel Sulphur Content on the Particle Emission. SAE Technical Paper 2003-01-1890.
133. Mohr, M., Lehmann, U., and Rutter J. (2005). Comparison of Mass-Based and Non-Mass-Based Particle Measurement Systems for Ultra-Low Emissions from Automotive Sources. Environ. Sci. Technol. 39:2229-2238.
134. Myung, C., Lee, H., Kwon, S., Lee, S., Jun, J., Lee, Y., et al. (2009). Inter- Laboratory Correlation Exercise on a Light-Duty Diesel Passenger Vehicle to Verify Nano-particle Emission Characteristics by Korea Particle Measurement Programme. J. Mech. Sci. Technol., 23:729-738.
135. Ntziachristos, L., and Samaras Z. (2010a). The Potential of a Partial-Flow Constant Dilution Ratio Sampling System as a Candidate for Vehicle Exhaust Aerosol Measurements. J. Air Waste Manag. Assoc., 60:1223-1236.
136. Ntziachristos, L., and Samaras, Z. (2010b). Exhaust Emissions fromRoad Transport. EMEP/EEA Air Pollutant Emission Inventory Guidebook-2009. Technical Report No 9/2009. European Environment Agency, Copenhagen, Denmark. Available online at: http://www.eea.europa. eu/publications/emep-eea-emission-inventory- guidebook-2009
137. Ntziachristos, L., Giechaskiel, B., Pistikopoulos, P., and Samaras, Z. (2005). Comparative Assessment of Two Different Sampling Systems for Particle Emission Type-Approval Measurements. SAE Technical Paper 2005-01- 0198.
138. Ntziachristos, L., Giechaskiel, B., Pistikopoulos, P., Samaras, Z., Mathis, U., Mohr, M., et al. (2004a). Performance Evaluation of a Novel Sampling and Measurement System for Exhaust Particle Characterization. SAE Technical Paper 2004-01-1439.
139. Oberdörster, G. (1996). Significance of Particle Parameters in the Evaluation of Exposure-Dose Relationships of Inhaled Particles. Inhal. Toxicol. 8(Suppl):73-90.
140. Oberdörster, G. (2000). Toxicology of Ultrafine Particles: In Vivo Studies. Philos. Trans. R. Soc. Ser. A 258:2719-2740.
141. -3. Poster Presented at the AAAR 29th Anual Conference, Portland, OR, October 25-29, 2010.
142. Park, K., Kittelson, D., and McMurry, P. (2004). Structural Properties of Diesel Exhaust Particles Measured by Transmission. Electron Microscopy (TEμ): Relationships to Particle Mass and Mobility. Aerosol Sci. Techol. 38:881-889. (Pubitemid 39362727)
143. Particulates (2003). EU Particulates Programme Final Report: Characterization of Exhaust Particulate Emissions from Road Vehicles. Available at: http://lat.eng.auth.gr/particulates/downloads.htm
144. Petzold, A., and Schönlinner, M. (2004). Multi-Angle Absorption Photometry - A New Method for the Measurement of Aerosol Light Absorption and Atmospheric Black Carbon. J. Aerosol Sci., 35:421-441. (Pubitemid 38410918)
145. Piock, W., Hoffmann, G., Berndorfer, A., Salemi, P., and Fusshoeller, B. (2011). Strategies Towards Meeting Future Particulate Matter Emission Requirements in Homogeneous Gasoline Direct Injection Engines. SAE Technical Paper 2011-01-1212.
146. PMP (2003). Report of the GRPE Particle Measurement Programme (PMP): Government SponsoredWork Programmes, Available at: http://www.unece. org/trans/doc/2003/wp29grpe/TRANS-WP29-GRPE-specinf01e.pdf
147. Pope, C. III (2000). Epidemiology of Fine Particulate Air Pollution and Human Health: BiologicMechanisms andWho's at Risk? Environ. Health Perspect. 108:713-723.
148. Price, P., Stone, R., Collier, T., Davies, M., and Scheer, V. (2006). Dynamic Particulate Measurements from a DISI Vehicle: A Comparison of DMS500, ELPI, CPC and PASS. SAE Technical Paper 2006-01-1077.
149. Rönkkö, T., Virtanen, A., Kannosto, J., Keskinen, J., Lappi, M., and Pirjola, L. (2007). Nucleation Mode Particles with a Nonvolatile Core in the Exhaust of a Heavy Duty Diesel Vehicle. Environ. Sci. Technol., 41:6384-6389. (Pubitemid 47437977)
150. Rönkkö, T.,Virtanen, A.,Vaaraslahti, K.,Keskinen, J., Pirjola, L., and Lappi, M. (2006). Effect of Dilution Conditions and Driving Parameters on Nucleation Mode Particles in Diesel Exhaust: Laboratory and On-Road Study. Atmos Environ., 40:2893-2901.
151. Rothe, D., Zuther, F., Jacob, E., Messerer, A., Pöschl, U., Niessner, R., et al. (2004). New Strategies for Soot Emission Reduction of HD Vehicles. SAE Technical Paper 2004-01-3046.
152. Rusch, K., Hofmann, L., Zuerbig, J., and Scarnegie, B. (2003). PM-Reduction by SCR-Catalyst. SAE Technical Paper 2003-01-0777.
153. Saito, C., Nakatani, T., Miyairi, Y., Yuuki, K., Makino, M., Kurachi, H., et al. (2011). New Particulate Filter Concept to Reduce Particle Number Emissions. SAE Technical Paper 2011-01-0814.
154. Sakurai, H., and Ehara, K. (2010). A Method for Traceable Calibration of Condensation Particle Counters at Low Concentrations. Poster Presented at the AAAR 29th Annual Conference, Portland, OR, October 25-29 2010.
155. Sakurai, H., Saito, K., Taishi, T., andKoyama, T. (2011). Two Sources of Error in Determination of the Particle Concentration Reduction Factor of the Volatile Particle Remover Used in Legislated Vehicle Emission Measurement. Meas. Sci. Technol., 22:085108.
156. Sandbach, E., and Marshall, I. (2007). Volatile Particle Remover Calibration Procedures. AEA Report to the Department for Transport. Available at: http://www.unece.org/fileadmin/DAM/trans/doc/2008/wp29grpe/PMPVPR- CalibrationProcedure.pdf.
157. Schauer, J. (2003). Evaluation of Elemental Carbon as a Marker for Diesel Particulate Matter. J. Expo. Anal. Environ. Epidemiol., 13:443-453.
158. Schauer, J., Christensen, C., Kittelson, D., Johnson, J., and Watts, W. (2008). Impact of Ambient Temperatures and Driving Conditions on the Chemical Composition of Particulate Matter Emissions from Non-Smoking Gasoline- Powered Motor Vehicles. Aerosol Sci. Technol., 42:210-223.
159. Schauer, J., Kleeman, M., Cass, G., and Simoneit, B. (1999). Measurement of Emissions from Air Pollution Sources. 2. C1 through C30 Organic Compounds from Medium Duty Diesel Trucks. Environ. Sci. Technol. 33:1578-1587. (Pubitemid 29232888)
160. Schindler, W., Haisch, C., Beck, H. A., Niessner, R., Jacob, E., and Rothe, D. (2004). A Photoacoustic Sensor System for Time Resolved Quantification of Diesel Soot Emissions. SAE Technical Paper 2004-01-0968.
161. Schraml, S., Heimgärtner, C., Will, S., and Leipertz, A. (2000). Application of a New Soot Sensor for Exhaust Emission Control Based on Time Resolved Laser Induced Incandescence (TIRE-LII). SAE Technical Paper 2000-01- 2864.
162. Seaton, A., Tran, L., Aitken, R., and Donaldson, K. (2010). Safety of Nanomaterials Interdisciplinary Research Centre Nanoparticles, Human Health Hazard and Regulation. J. R. Soc. Interface, 7:S119-S129.
163. Sogawa, Y., Hattori, H., Yanagisawa, N., Hosoya,M., Shoji, T., Iwakiri, Y., et al. (2007). Nano Particle Emission Evaluation of State of the Art Diesel Aftertreatment Technologies (DPF, Urea-SCR and DOC), Gasoline Combustion Systems (Lean Burn/Stoichiometric DISI and MPI) and Fuel Qualities Effects (EtOH, ETBE, FAME, Aromatics and Distillation). SAE Technical Paper 2007-01-4083.
164. Sokken, (2010). Exhaust Emissions Particle Number Measurement System. PMS-M2. Available at: http://www.sokken.co.jp/en/particle/ 201011/entry76.html
165. Stein, J. (2001).World Harmonized Heavy Duty Emissions Certification Procedure. Exhaust Emissions Measurement ISO 2nd Interim Report, Report to the ECE-GRPE WHDC Subgroup "ISO Activities", 2001.
166. Steininger (2011). Particle Number Emission Limits for Euro 6 Positive Ignition Vehicles. 15th ETH Conference on Combustion Generated Nanoparticles, June 26-29, Zürich, Switzerland.
167. 10. Environ. Health Perspect. Med., 7:246-253.
168. Stratmann, F., Otto, E., and Fissan, H. (1994). Thermophoretic and Diffusional Particle Transport in Cooled Laminar Tube Flow. J. Aerosol Sci. 25:1305-1319.
169. Swanson, J., and Kittelson, D. (2010). Evaluation of Thermal Denuder and Catalytic Stripper Methods for Solid Particle Measurements. J. Aerosol Sci. 41:1113-1122.
170. Swanson, J., Kittelson, D., Watts, W., Gladis, D., and Twigg, M. (2009). Influence of Storage and Release on Particle Emissions from New and Used CRTs. Atmos. Environ. 43:3998-4004.
171. Takegawa, N., and Sakurai, H. (2011). Laboratory Evaluation of a TSI Condensation Particle Counter (Model 3771) Under Airborne Measurement Conditions. Aerosol Sci. Technol., 45:272-283.
172. Tandon, P., Heibel, A., Whitmore, J., Kerke, N., and Chithapragada, K. (2010). Measurement and Prediction of Filtration Efficiency Evolution of Soot Loaded Diesel Particulate Filters. Chem. Eng. Sci., 65:4751-4760.
173. Thompson, N., Ntziachristos, L., Samaras, Z., Aakko, P., Wass, U., Hausberger, S., et al. (2004). Overview of the European "Particulates" Project on the Characterization of Exhaust Particulate Emissions from Road Vehicles: Results for Heavy-Duty Engines. SAE Technical Paper 2004-01- 1986.
174. TSI (2007). Engine Exhaust CPC 3790. Available at: http://www.tsi.com/en- 1033/models/2272/3790.aspx
175. Tzamkiozis, T., Ntziachristos, L., and Samaras, Z. (2010). Diesel Passenger Car PM Emissions: From Euro 1 to Euro 4 with Particle Filter. Atmos. Environ., 44:909-916.
176. UNECE Regulation No. 49 (Proposal for Supplement 4 to the 05 Series of Amendments to Regulation No. 49 (Emissions of Compression Ignition and Gas Fuelled Positive Ignition Engines for Use in Vehicles). Available at: http://www.unece.org/trans/doc/ 2010/wp29grpe/ECE-TRANS-WP29-GRPE-2010-07e.pdf
177. UNECE Regulations No. 83 (Uniform Provisions Concerning the Approval of Vehicles with Regard to the Emission of Pollutants According to Engine Fuel Requirements). Available at: http://www.unece.org/ trans/main/wp29/wp29regs81- 100.html
178. Vaaraslahti, K., Ristimäki, J., Virtanen, A., Keskinen, J., Giechaskiel, B., and Solla, A. (2006). Effect of Oxidation Catalysts on Diesel Soot Particles. Environ. Sci. Technol. 40:4776-4781. (Pubitemid 44157217)
179. Vaaraslahti, K., Virtanen, A., Ristimäki, J., and Keskinen, J. (2004a). Nucleation Mode Formation in Heavy-Duty Diesel Exhaust with and without a Particulate Filter. Environ. Sci. Technol., 38:4884-4890. (Pubitemid 39238103)
180. Vaaraslahti, K., Virtanen, A., Ristimäki, J., and Keskinen, J. (2004b). Effect of After-Treatment Systems on Size Distribution of Heavy Duty Diesel Exhaust Aerosol. SAE Technical Paper 2004-01-1980.
181. Vakkilainen, A., and Lylykangas, R. (2004). Particle Oxidation Catalyst (POC) for Diesel Vehicles. SAE Technical Paper 2004-28- 0047.
182. VAMV (2006). Verordnung des EJPD über Abgasmessgeräte für Verbrennungsmotoren (VAMV) vom 19. März 2006 (Stand am 2. Mai 2006)
183. VIM(2008). InternationalVocabulary of Basic andGeneral Terms in Metrology; VIM, 3rd ed., Joint Commitee for Guides in Metorology, vol. 200.
184. Virtanen, A., Ristimäki, J., Vaaraslahti, K., and Keskinen, J. (2004). Effect of Engine Load on Diesel Soot Particles. Environ. Sci. Technol. 38:2551-2556. (Pubitemid 38579855)
185. Vogt, R., Kirchner, U., and Maricq, M. (2006). Technical Challenges with Low Level PM Mass and Number Measurements. Cambridge Particle Meeting, May 22, 2006, Cambridge, UK.
186. Vogt, R., Kirchner, U., and Maricq,M. (2010). Investigation of EURO-5/6 Level Particle Number Emissions of European Diesel Light Duty Vehicles. 14th ETH Conference, August 1-4, 2010, Zürich, Switzerland.
187. Vouitsis, E., Ntziachristos, L., and Samaras, Z. (2003). Particulate Matter Mass Measurements for Low Emitting Diesel Powered Vehicles: What's Next? Prog. Energy Combust. Sci., 29:635-672.
188. Vouitsis, E., Ntziachristos, L., and Samaras, Z. (2004). Modeling of Diesel Exhaust Aerosol During Laboratory Sampling. Atmos. Environ., 39:1335-1345.
189. Wang S., and Flagan R. (1990). Scanning Electrical Mobility Spectrometer. Aerosol Sci. Technol. 13:230-240. (Pubitemid 20298369)
190. Wang, X., Caldow, R., Sem, G., Hama, N., and Sakurai, H. (2010). Evaluation of a Condensation Particle Counter for Vehicle Emission Measurement: Experimental Procedure and Effects of Calibration Aerosol Material. J. Aerosol Sci. 41:306-318.
191. Wedekind, B., Andersson, J., Hall, D., Stradling, R., Barnes, C., andWilson, G. (2000). DETR/SMMT/CONCAWE Particle Research Programme: Heavy Duty Results. SAE Technical Paper 2000-01-2851.
192. Wei, Q., Oestergaard, K., Porter, S., Ichiro, A., Adachi, M., and Montajir, M. (2006). Real-Time Measuring System for Engine Exhaust Solid Particle Number Emission-Design and Performance. SAE Technical Paper 2006- 01-0864.
193. Wentzel, M., Gorzawski, H., Naumann, K.-H., Saathoff, H., and Weinbruch, S. (2003). Transmission Electron Microscopical and Aerosol Dynamical Characterization of Soot Aerosols. J. Aerosol Sci. 34:1347-1370. (Pubitemid 37163752)
194. Whitaker, P., Karpus, P., Ogris, M., and Hollerer, P. (2011).Measures to Reduce Particulate Emissions from Gasoline DI Engines. SAE Technical Paper 2011-01-1219.
195. Yang, H., Barger, M., Castranova, V., Ma, J., Yang, J., and Ma, J. (1999). Effects of Diesel Exhaust Particles (DEP), Carbon Black, and Silica on Macrophage Responses to Lipopolysaccharide: Evidence of DEP Suppression of Macrophage Activity. J. Toxicology and Environmental Health A 58:261-278. (Pubitemid 29535214)
196. Yang, J., Stewart,M., Maupin, G., Herling, D., and Zelenyuk, A. (2009). Single Wall Diesel Particulate Filter (DPF) Filtration Efficiency Studies Using Laboratory Generated Particles. Chem. Eng. Sci., 64:1625-1634.
197. Zervas, E., Dorlhene, P., Forti, L., Perrin, C., Momique, J., Monier, R., et al. (2005). Inter-Laboratory Test of Exhaust PM Using ELPI. Aerosol Sci. Technol. 39:333-346. (Pubitemid 40646927)
198. Zervas, E., Dorlhene, P., Forti, L., Perrin, C., Momique, J. C., Monier, R., et al. (2006). Inter-Laboratory Study of the Exhaust Gas Particle Number Measurements Using the Condensation Particle Counter (CPC). Energy & Fuels 20:2426-2431. (Pubitemid 46049900)
199. Zhang, S., McMahon, W, Frodin, B, Toutoundjian, H., and Cruz, M. (2010). Particulate Emissions from California Lev II Certified Gasoline Direct Injection Vehicles. 20th CRC On-Road Vehicle Emissions Workshop, March 22-23, 2010, San Diego, CA.
200. Zhao, F., Lai, M., and Harrington, D. (1999). Automotive Spark-Ignited Direct- Injection Gasoline Engines. Prog. Energy Combust. Sci., 25:437-562. (Pubitemid 30509481)