Motor Vehicle PM Emissions Measurement at LEV III Levels

SAE International Journal of Engines

Volumn 4, Issue 1, 2011, Pages 597-609

  Maricq, M Matti ^a   Szente, Joseph ^a   Loos, Michael ^a   Vogt, Rainer ^a  

^a FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACCUMULATION MODES; AFTER-TREATMENT; CHARACTERISTIC SIZE; COLD-START; EXHAUST PIPES; GASOLINE DIRECT INJECTION ENGINES; GRAVIMETRIC MEASUREMENTS; LOW LEVEL; MOTOR VEHICLE; NUCLEATION MODES; PARTICLE NUMBERS; PARTICULATE MATTER; PARTICULATE MATTER EMISSIONS; PM EMISSIONS; PM-COMPOSITION; REAL TIME; SAMPLING CONDITIONS; SAMPLING METHOD; SOLID PARTICLES; STRONG CORRELATION;

DIESEL ENGINES; DIRECT INJECTION; ENGINES; FUEL ECONOMY; SOOT; STANDARDS;

PARTICULATE EMISSIONS;

EID: 79959566320     PISSN: 19463936     EISSN: 19463944     Source Type: Journal    
DOI: 10.4271/2011-01-0623     Document Type: Article

References (43)

1. State of California Air Resources,Preliminary discussion paper - proposed amendments to California's low-emission vehicle regulations - particulate matter mass, ultrafine solid particle number, and black carbon emissions, May, 2010, http://www.arb.ca.gov/msprog/levprog/leviii/meetings/051810/pm_disc_paper-v6.pdf.
2. Iwamoto, Y., Noma, K., Nakayama, O., Yamauchi, T. et al., "Development of Gasoline Direct Injection Engine," SAE Technical Paper 970541, 1997, doi: 10.4271/970541.
3. Kaiser, E.W., Siegl, W.O., Brehob, D.D., and Haghgooie, M. "Engine-Out Emissions from a Direct-Injection Spark-Ignition (DISI) Engine," SAE Technical Paper 1999-01-1529, 1999, doi:10.4271/1999-01-1529.
4. Yi, J., Wooldridge, S., Coulson, G., Hilditch, J. et al., "Development and Optimization of the Ford 3.5L V6 EcoBoost Combustion System," SAE Int. J. Engines 2(1): 1388-1407, 2009, doi:10.4271/2009-01-1494.
5. U. S. Environmental Protection Agency, Regulatory Announcement, "Heavy-duty engine and vehicle standards and highway diesel fuel sulfur control requirements", December, 2000, http://www.epa.gov/oms/regs/hd2007/frm/f00057.pdf.
6. Chase, R.E., Duszkiewicz, G.J., Richert, J.F.O., Lewis, D. et al., "PM Measurement Artifact: Organic Vapor Deposition on Different Filter Media," SAE Technical Paper 2004-01-0967, 2004, doi:10.4271/2004-01-0967.
7. U.S. Environmental Protection Agency, Engine testing regulations, "Testing and Measuring Emissions", 2008, http://www.epa.gov/nvfel/testing/regulations.htm.
8. Khalek, I., E-66 - Phase 1-3, 2007 Diesel particulate measurement research", Final report, Coordinating Research Council, http://www.crcao.org/publications/emissions/index.html.
9. Keskinen, J., Pietarinen, K., and Lehtimäki, M. "Electrical low pressure impactor", J. Aerosol Sci. 23, 353-360 (1992).
10. Tammet, H., Mirme, A., Tamm, E. "Electrical aerosol spectrometer of Tartu University", Atmos. Res. 62, 315-324, (2002).
11. Biskos, G., Reavell, K., Collings, N. "Description and theoretical analysis of a differential mobility spectrometer", Aerosol Sci. Technol., 39, 527-541 (2005).
12. Linke, M., Schindler, W., and de Almeida, W.V., "A New Device for Transient Measurement of Ultralow Soot Emissions," SAE Technical Paper 2004-01-3267, 2004, doi:10.4271/2004-01-3267.
13. Ntziachristos, L., Giechaskiel, B., Pistikopoulos, P., Samaras, Z. et al., "Performance Evaluation of a Novel Sampling and Measurement System for Exhaust Particle Characterization," SAE Technical Paper 2004-01-1439, 2004, doi:10.4271/2004-01-1439.
14. Casati, R., Scheer, V., Vogt, R., and Benter, T., "Measurement of nucleation and soot mode particle emission from a diesel passenger car in real world and laboratory in situ dilution" Atmos. Environment 41, 2125-2135 (2007).
15. Fierz, M., Vernooij, M. G. C., Burtscher, H. "An improved low-flow thermodenuder", J. Aerosol Sci. 38, 1163-1168 (2007).
16. th CRC On-road vehicle emissions workshop, San Diego, March 2010.
17. Bergmann, M., Vogt, R., Szente, J., Maricq, M. et al., "Using Ejector Diluters to Sample Vehicle Exhaust at Elevated Pressures and Temperatures," SAE Int. J. Engines 1(1):1167-1178, 2008, doi:10.4271/2008-01-2434.
18. Regulation (EC) No 715/2007, "on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information.", 2007.
19. EU Particulates Programme, Final Report: "Characterization of exhaust particulate emissions from road vehicles" http://lat.eng.auth.gr/particulates/downloads.htm.
20. Chase, R.E., Duszkiewicz, G.J., Lewis, D., and Podsiadlik, D.H., "Reducing PM Measurement Variability by Controlling Static Charge," SAE Technical Paper 2005-01-0193, 2005, doi:10.4271/2005-01-0193.
21. Fanick, E.R. and Williamson, I., "Comparison of Emissions and Fuel Economy Characteristics of Conventional, Additized, and Substantially Synthetic Diesel Fuels in a Heavy-Duty Diesel Engine," SAE Technical Paper 2002-01-1702, 2002, doi:10.4271/2002-01-1702.
22. Mamakos, A., Ntziachristos, L., Samaras, Z. "Evaluation of the Dekati mass monitor for the measurement of exhaust particle mass emissions", Environ. Sci. Technol. 40, 4739-4745 (2006).
23. Mertes, S., Schröder, F., and Wiedensohler, A. "The particle detection efficiency curve of the TSI-3010 CPC as a function of the temperature difference between saturator and condenser", Aerosol Sci. Technol. 23, 257-261 (1995).
24. Turpin, B. J., Huntzicker, J. J., and Hering, S. V. "Investigation of organic aerosol sampling artifacts in the Los Angeles basin, Atmos. Environ., 28, 3061-3071 (1994).
25. Kirchstetter, T. W., Corrigan, C. E., and Novakov, T. "Laboratory and field investigation of the adsorption of gaseous organic compounds onto quartz filters", Atmos. Environ. 35, 1663-1671 (2001).
26. Mader, B. T., and Pankow, J. F. "Gas/solid partitioning of semivolatile organic compounds (socs) to air filters. 3. an analysis of gas adsorption artifacts in measurements of atmospheric socs and organic carbon (oc) when using teflon membrane filters and quartz fiber filters", Environ. Sci. Technol. 35 3422-3432 2001.
27. Subramanian, R., Khlystov, A. Y., Cabada, J. C., and Robinson, A. L. "Positive and negative artifacts in particulate organic carbon measurements with denuded and undenuded sampler configurations", Aerosol Sci. Technol. 38, 27-48 (2004).
28. Chow, J. C., Watson, J. G., Crow, D., Lowenthal, D. H., and Merrifield, T. "Comparison of IMPROVE and NIOSH carbon measurements". Aerosol Sci. Technol. 34, 23-34 (2001).
29. Kirchner, U., Vogt, R., and Maricq, M., "Investigation of EURO-5/6 Level Particle Number Emissions of European Diesel Light Duty Vehicles," SAE Technical Paper 2010-01-0789, 2010, doi:10.4271/2010-01-0789.
30. Braisher, M., Stone, R., and Price, P., "Particle Number Emissions from a Range of European Vehicles," SAE Technical Paper 2010-01-0786, 2010, doi:10.4271/2010-01-0786.
31. Bergmann, M., Kirchner, U., Vogt, R., and Benter, T. "On-road and laboratory investigation of low-level PM emissions of a modern diesel particulate filter equipped diesel passenger car", Atmos. Environment 43, 1908-1916 (2009).
32. Maricq, M.M., Chase, R.E., Podsiadlik, D.H., and Vogt, R., "Vehicle Exhaust Particle Size Distributions: A Comparison of Tailpipe and Dilution Tunnel Measurements," SAE Technical Paper 1999-01-1461, 1999, doi:10.4271/1999-01-1461.
33. Abdul-Khalek, I., Kittelson, D., and Brear, F., "The Influence of Dilution Conditions on Diesel Exhaust Particle Size Distribution Measurements," SAE Technical Paper 1999-01-1142, 1999, doi:10.4271/1999-01-1142.
34. Khalek, I.A., Bougher, T., and Jetter, J.J., "Particle Emissions from a 2009 Gasoline Direct Injection Engine Using Different Commercially Available Fuels," SAE Int. J. Fuels Lubr. 3(2):623-637, 2010, doi:10.4271/2010-01-2117.
35. Harris, S. J. and Maricq, M. M. "Signature size distributions for diesel and gasoline engine exhaust particulate matter", J. Aerosol Sci. 32, 749-764 (2001).
36. Maricq, M. M. and Xu, N. "The effective density and fractal dimension of soot particles from premixed flames and motor vehicle exhaust", J. Aerosol Sci. 35, 1251-1274 (2004).
37. Park, K., Cao, F., Kittelson, D. B., and McMurry, P. H. "Relationship between particle mass and mobility for diesel exhaust particles", Environ. Sci. Technol. 37, 577-583 (2003).
38. Sakurai, H., Park, K., McMurry, P. H., Zarling, D. D., Kittelson, D. B., and Ziemann, P. J., "Size-dependent mixing characteristics of volatile and nonvolatile components in diesel exhaust aerosols", Environ. Sci. Technol. 37, 5487-5495 (2003).
39. Keskinen, J. and Rönkkö, T., "Can real-world diesel exhaust particle size distribution be reproduced in the laboratory? A critical review", J. Air & Waste Manage. Assoc., 60, 1245-1255 (2010).
40. Ntziachristos, L. and Samaras, Z., "The potential of a partial-flow constant dilution ratio sampling system as a candidate for vehicle exhaust aerosol measurements", J. Air & Waste Manage. Assoc., 60, 1223-1236 (2010).
41. Kittelson, D. B., Watts, W. F. and Johnson, J. P. "On-road and laboratory evaluation of combustion aerosols-Part1: Summary of diesel engine results", J. Aerosol Sci., 37, 913-930 (2006).
42. Rönkkö, T., Virtanen, A., Kannosto, J., Keskinen, J., Lappi, M., and Pirjola, L. "Nucleation mode particles with a nonvolatile core in the exhaust of a heavy duty diesel vehicle", Environ. Sci. Technol., 41, 6384-6389 (2007).
43. De Filippo, A. and Maricq, M. M. "Diesel nucleation mode particles: Semivolatile or solid?" Environ. Sci. Technol 42, 7957-7962 (2008).