Residual stress determination by hole drilling combined with optical methods

Proceedings of the Society for Experimental Mechanics, Inc.

Volumn 67, Issue , 2010, Pages 145-158

  Nelson, D V ^a  

^a Stanford University   (United States)

Author keywords

Brittle coating; Digital image correlation; ESPI; Hole drilling; Holographic; Interferometric; Moire; Photoelastic; Residual stress; Rosette; Shearography

Indexed keywords

BRITTLE COATINGS; DIGITAL IMAGE CORRELATIONS; ESPI; HOLE DRILLING; HOLOGRAPHIC; INTERFEROMETRIC; MOIRE; PHOTOELASTIC; ROSETTE; SHEAROGRAPHY;

COATINGS; HOLOGRAPHIC INTERFEROMETRY; IMAGE ANALYSIS; RESIDUAL STRESSES; ROCK DRILLING; STRAIN MEASUREMENT;

BOREHOLES;

EID: 79960020269     PISSN: 10466789     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11340-009-9329-3     Document Type: Conference Paper

References (115)

1. Schajer GS, Roy G, Flaman MT, Lu J (1996) Hole drilling and ring core methods. In: Lu J (ed) Handbook of measurement of residual stresses. Society for Experimental Mechanics, Bethel, pp 5-35
2. Schajer GS (2009) Advances in hole-drilling residual stress measurements. Exp Mech. doi: 10.1007/s11340-009-9228-7
3. Standard test method for determining residual stresses by the hole-drilling strain-gage method (2008) standard E837-08. American Society for Testing and Materials, West Conshohocken, PA
4. Gadd CW (1946) Residual stress indications in brittle lacquer. Proc Soc Exp Stress Anal 4:74-77
5. Soete W (1949) Measurement and relaxation of residual stresses. Weld J Res Supp 28(8):354-s-364-2s
6. Riparbelli C (1950) A method for the determination of initial stresses. Proc Soc Exp Stress Anal 8(1):173-196
7. Boiten RG (1952) Determination of residual stresses. Br J Appl Phys 3(4):110-111
8. Tokarcik AG, Polzin MH (1952) Quantitative evaluation of residual stresses by the stresscoat drilling technique. Proc Soc Exp Stress Anal 9(2):195-207
9. Ellis G (1947) Stress determination by britttle coatings. Mech Eng 69(7):567-571
10. Durelli AJ, Tsao CH (1952) Discussion of A.G. Tokarcik, AG, Polzin, MH 'Quantitative evaluation of residual stresses by the stresscoat drilling technique'. Proc Soc Exp Stress Anal 10 (1):237-242
11. Timoshenko S, Goodier J (1970) Theory of elasticity. McGraw-Hill, New York
12. Zandman F (1960) Photoelastic-coating technique for determining stress distribution in welded structures. Weld J 39(5):191s-198s
13. Nisida M (1965) A method for measuring stresses on metal surface photoelastically. Sci Papers Inst Phys Chem Res 59 (2):69-77
14. Nisidia M, Takabayashi H (1965) Thickness effects in "hole method" and applications of the method to residual stress measurement. Sci Papers Inst Phys Chem Res 59(2):78-86
15. Tatarinov AS, Tarasov YN, Nedoskea AY, Parlhomenko IV (1969) Welding stresses investigated using photo-elastic coatings. Autom Weld 22(11):36-42
16. Gibbs HG, Hooke CJ, Stagg JJ (1967) An application of photoelastic gauges to the measurement of residual stresses. Lucas Eng Rev 3(3):85-88
17. Matthews GJ, Hooke CJ (1972) The measurement of residual stresses by the use of photoelastic gauges. Int J Solids Struct 8 (2):193-214
18. Nedoseka AY (1979) A semi-automatic device for the measurement of welding stresses on the surface of components. Autom Weld 32(3):30-33
19. Issa S (1990) Residual stresses in asbestos-cement pipes. J Eng Mech 116(5):1125-1141
20. Cardenas-Garcia JF (2000) The hole drilling method in photoelasticity - application of an optimization approach. Strain 36 (1):9-17
21. Chang CW, Chen PH, Lien HS (2009) Evaluation of residual stress in pre-stressed concrete material by digital image processing photoelastic coating and hole drilling method. Measurement 42:552-558
22. Post D, Han B, Ifju P (1994) High sensitivity moiré. Springer, New York
23. Post D, Han B (2008) Moire interferometry. In: Sharpe W (ed) Handbook of experimental solid mechanics. Springer, New York, pp 627-653
24. McDonach A, McKelvie J, MacKenzie P, Walker CA (1983) Improved moire interferometry and applications in fracture mechanics, residual stress and damaged composites. Exp Techniques 7(6):20-24
25. Nicoletto G (1988) Theoretical fringe analysis for a coherent optics method or residual stress measurement. J Strain Anal 23 (4):169-178
26. Nicoletto G (1991) Moire interferometry determination of residual stresses in the presence of gradients. Exp Mech 31 (3):252-256
27. Furgiuele FM, Pagnotta L, Poggialini A (1991) Measuring residual stresses by hole-drilling and coherent optics techniques: a numerical calibration. J Eng Mater & Technol 113(1):41-50
28. Wu Z, Lu J, Han B (1998) Study of residual stress distribution by a combined method of moire interferometry and incremental hole drilling, part I: theory and part II: implementation. J Appl Mech 65(4):837-850
29. Wu Z, Lu J (2000) Study of surface residual stress by three-dimensional displacement data at a single point in hole drilling method. J Eng Mater Technol 122(2):215-220
30. Min Y, Hong M, Xi Z, Lu J (2006) Determination of residual stress by use of phase shifting moire interferometry and holedrilling methods. Opt Lasers Eng 44(1):68-79 (Pubitemid 41285216)
31. Cardenas-Garcia JF, Preidikman S (2006) Solution of the moire hole drilling method using a finite-element-based approach. Int J Solids Struct 43(22-23):6751-6766 (Pubitemid 44442171)
32. Chen J (2003) Three-directional grating and application in measuring residual stresses. Int J Mech Eng Educ 31(4):310-316
33. Ya M, Marquette P, Belahcene F, Lu J (2004) Residual stresses in laser welded aluminum plate by use of ultrasonic and optical methods. Mater Sci Eng A 382(1-2):257-264 (Pubitemid 39168988)
34. Ya M, Xing Y, Dai F, Lu K, Lu J (2003) Study of residual stress in surface nanostructured AISI 316L stainless steel using two mechanical methods. Surf Coat Technol 168(2-3):148-155 (Pubitemid 36447458)
35. Shankar K, Xie H, Wei R, Asundi A, Boay CG (2004) A study on residual stresses in polymer composites using moire interferometry. Adv Compos Mater 13(3-4):237-253 (Pubitemid 40020900)
36. Chen J, Zhao S, Jin X, Kuang Z (2004) Measurement of residual stresses in fiber reinforced composite material. Key Eng Mater 274-276:865-870 (Pubitemid 46841079)
37. Cardenas JF, Ekwaro-Oise S, Berg JM, Wilson WH (2005) Nonlinear least squares solution to the moire hole method problem in orthotropic materials, part I: residual stresses. Exp Mech 45(4):314-324
38. Chen J, Xin Q, Yang F (2007) Relationship between the depth of drilling and residual strain relief in fiber reinforced composite materials. J Mater Eng Perform 16(1):46-51
39. Vest C (1979) Holographic interferometry. Wiley, New York
40. Jones R, Wykes C (1989) Holographic and speckle interferometry. Cambridge University Press, England
41. Shchepinov V, Pisarev V (1996) Strain and stress analysis by holographic and speckle interferometry. Wiley, Chichester
42. Kreis T (2005) Handbook of holographic interferometry. Wiley-VCH, Weinheim
43. Pryputniewicz R (2008) Holography. In: Sharpe W (ed) Handbook of experimental solid mechanics. Springer, New York, pp 675-699
44. Schedin S (2006) Digital holographic interferometry. J Holography Speckle 3:1-17
45. Bass JD, Schmitt D, Ahrens J (1986) Holographic in situ stress measurements. Geophysl J R Astr Soc 85(1):13-41
46. Nelson DV, McCrickerd J (1986) Residual-stress determination through combined use of holographic interferometry and blindhole drilling. Exp Mech 26(4):371-378
47. Antonov AA (1983) Development of the method and equipment for holographic inspection of residual stresses in welded structures. Weld Prod 30(12):41-43
48. Lobanov LM, Kasatkin BS, Pivtorak VA, Andrushchenko SG (1983) A procedure for investigating residual welding stresses using holographic interferometry. Autom Weld 36(3):5-9
49. Rassokha AA, Talalaev NN (1983) Evaluation of residual stresses in welded joints of thin plate by a holographic method. Ind Lab 48(11):1143-1146
50. Wang L, Ke J (1988) The measurement of residual stresses by sandwich holographic interferometry. Opt Lasers Eng 9(2):111-119
51. Makino A, Nelson DV (1994) Residual stress determination by single-axis holographic interferometry and hole drilling - part 1: theory. Exp Mech 34(1):66-78
52. Lin ST, Hsieh CT, Hu CP (1994) Two holographic blind hole methods for measuring residual stresses. Exp Mech 34(2):141-147
53. Lin ST, Hsieh CT, Lee CK (1998) A general form for calculating residual stresses detected by using the holographic blind-hole method. Exp Mech 38(4):255-260 (Pubitemid 29203665)
54. Lin ST (2000) Blind-hole residual stress determination using optical interferometry. Exp Mech 40(1):60-67
55. Makino A, Nelson DV (1997) Determination of sub-surface distributions of residual stresses by a holographic-hole drilling technique. J Eng MaterTechnol 119(1):95-103 (Pubitemid 127680270)
56. Xiao Z, Fok WC, Lwin DT (1993) Parametric study of residual stresses due to shot peening. J Mater Process Technol 39(3-4):469-483
57. Onishchenko Y, Kniazkov A, Shulz J, Salamo G (1999) The portable holographic interferometer for residual stress measurement and nondestructive testing (NDT) of the pipelines. In: Conference on nondestructive evaluation of utilities and pipelines III, vol. 3588. SPIE, Bellingham, WA, pp 16-24
58. Kniazkov A, Onischenko Y, Dovgalenko G, Salamo G (1999) Advanced holographic nondestructive testing system for residual stress analysis. In: International.workshop on nondestructive testing and computer simulations in science and engineering, vol. 3687. SPIE, Bellingham, WA, pp 73-81
59. Lobanov LM, Pivtorak V (2002) Diagnostics of residual stressed state of welded structures using the methods of hologaphic interferometry and electronic speckle-interferometry. Mater Sci Forum 404-407:867-874
60. Lobanov LM, Pivtorak VA (2002) Development of holographic interferometry for investigation of the stress-strain state and quality control of welded structures. Weld Res Abroad 48(1):25-32 (Pubitemid 34154509)
61. Pisarev VS, Balalov W, Aistov VS, Bondarenko MM, Yustus MG (2001) Reflection hologram interferometry combined with hole drilling technique as an effective tool for residual stress fields investigation in thin-walled structures. Opt Lasers Eng 36 (6):551-597 (Pubitemid 32975713)
62. Pisarev VS, Aisotve VS, Balalov VV, Bondarenko MM, Chumak SV, Griogoriev VD, Yustus MG (2004) Metrological justification of reflection hologram interferometry with respect to residual stresses determination by means of blind hole drilling. Opt Lasers Eng 41(2):353-410
63. Balalov VV, Pisarev VS, Moshensky VG (2007) Combined implementing the hole drilling method and reflection hologram interferometry for residual stress determination in cylindrical shells and tubes. Opt Lasers Eng 45(5):661-676 (Pubitemid 46273655)
64. Andrushchenko SG, Krotenko PD (2005) Displacement determination by holographic interferometry for residual stress analysis in elastic bodies. Int Appl Mech 41(8):929-933 (Pubitemid 41698097)
65. Apal'kov AA, Larkin AI, Osintev AV, Odintev IN, Shchepinov VP, Shchikanov AY, Fonatine J (2007) Holographic interference method for studying residual stresses. Quantum Electron 37 (6):590-594
66. Baldi A, Bertolino F (2007) Sensitivity analysis of full field methods for residual stress measurement. Opt Lasers Eng 45 (5):651-660 (Pubitemid 46273654)
67. Cloud G (1995) Optical methods of engineering analysis. Cambridge University Press, England
68. Rastogi P (2001) Digital speckle pattern interferometry and related techniques. Wiley, West Sussex
69. Gan Y, Steinchen W (2008) Speckle methods. In: Sharpe J (ed) Handbook of experimental solid mechanics. Springer, New York, pp 655-673
70. Yang L, Ettemeyer A (2003) Strain measurement by threedimensional electronic speckle pattern interferometry: potentials, limitations and applications. Opt Eng 42:1257-1266
71. Zhang J (1998) Two-dimensional in-plane electronic speckle pattern interferometer and its application to residual stress determination. Opt Eng 37(8):2402-2409
72. Zhang J, Chong TC (1998) Fiber electronic speckle pattern interferometry and its applications in residual stress measurements. Appl Opt 37(28):6707-6714
73. Asundi A, Zhang J (1999) Industrial applications of residual stress determination using 2-D in-plane sensitive fibre ESPI and hole drilling. In: Conference on optical engineering for sensing and nanotechnology, vol. 3740. SPIE, Bellingham, WA, pp 78-81
74. Schmitt DR, Hunt RW (2000) Inversion of speckle interferometer fringes for hole-drilling residual stress determinations. Exp Mech 40(2):129-137 (Pubitemid 30409725)
75. Diaz FV, Kaufmann GH, Moller O (2001) Residual stress determination using blind-hole drilling and digital speckle pattern interferometry with automated data processing. Exp Mech 41(4):319-323 (Pubitemid 33109664)
76. Focht G, Schiffner K (2003) Determination of residual stresses by an optical correlative hole-drilling method. Exp Mech 43 (1):97-104 (Pubitemid 36409338)
77. Steinzig M, Ponslet E (2003) Residual stress measurement using the hole drilling method and laser speckle interferometry, part I. Exp Techniques 27(3):43-46
78. Ponslet E, Steinzig M (2003) Residual stress measurement using the hole drilling method and laser speckle interferometry, part II: analysis technique. Exp Techniques 27(4):17-21
79. Ponslet E, Steinzig M (2003) Residual stress measurement using the hole drilling method and laser speckle interferometry, part III: analysis technique. ExpTechniques 27(5):45-48
80. Steinzig M, Takahashi T (2003) Residual stress measurement using the hole drilling method and laser Speckle interferometry, part IV: measurement accuracy. ExpTechniques 27(6):59-63
81. Viotti MR, Kaufmann GH (2004) Accuracy and sensitivity of a hole drilling and digital speckle interferometry combined technique to measure residual stress. Opt Lasers Eng 41 (2):297-305
82. Schmitt DR, Diallo MS, Weichman F (2006) Quantitative determination of stress by inversion of speckle interferometer fringe patterns: experimental laboratory tests. Geophys J Int 167 (3):1425-1438 (Pubitemid 44869727)
83. Schajer GS, Steinzig M (2005) Full-field calculation of hole drilling residual stresses from electronic speckle pattern interferometry data. Exp Mech 45(6):526-532 (Pubitemid 41763293)
84. Dolinko AE, Kaufmann GH (2006) A least-squares method to cancel rigid body displacements in hole drilling and DSPI systems for measuring residual stresses. Opt Lasers Eng 44(12):1336-1347 (Pubitemid 44041686)
85. Maras A, Montay G, Sicot O, Rouhaud E, Francois M (2006) A new approach in residual stress analysis by speckle interferometry. Mater Sci Forum 524-525:465-470
86. Viotti MR, Dolinko AE, Galizzi GE, Kaufmann GH (2006) A portable digital speckle pattern interferometry device to measure residual stresses using the hole drilling technique. Opt Lasers Eng 44(10):1052-1066
87. Albertazzi A (2006) Configurations and applications of electronic speckle pattern interferometry for radial metrology using conical mirrors. In: Speckle06: speckles, from grains to flowers, vol. 6341. SPIE, Bellingham, WA, pp 634410A-1-634410A-6
88. Viotti MR, Albertazzi AG, Kapp M (2008) Experimental comparison between a portable DSPI device with diffractive optical element and a hole drilling strain gage combined system. Opt Lasers Eng 46(11):835-841
89. Albertazzi A, Viotti M, Kapp, M (2008) A radial In-plane DSPI interferometer using diffractive optics for residual stress measurement. In: Ninth international symposium on laser metrology, vol. 7155. SPIE, Bellingham, WA, pp 715525-1-715525-10
90. Ribeiro J, Monteiro J, Vaz M, Lopes H, Piloto P (2009) Measurement of residual stresses with optical techniques. Strain 45(2):123-130
91. Hung YY (1982) Shearography: a new optical method for strain measurement and nondestructive testing. Opt Eng 21:391-395
92. Steinchen W, Yang L (2008) Digital shearography. SPIE, Bellingham
93. Hung YY, Ho H (2005) Shearography: an optical measurement technique and applications. Mater Sci Eng R 49:61-87 (Pubitemid 40819724)
94. Hung MYY, Shang HM, Yang L (2003) Unified approach for holography and shearography in surface deformation measurement and nondestructive testing. Opt Eng 42:1197-1207
95. Hung MYY, Long KW, Wang JQ (1997) Measurement of residual stress by phase shift shearography. Opt Lasers Eng 27:61-73 (Pubitemid 127425207)
96. Wu SY, Qin YW (1995) Determination of residual stresses using large shearing speckle interferormetry and the hole drilling method. Opt Lasers Eng 23(4):223-244
97. Montay G, Bulhak J, Surrel Y, Vautrin A, Lu J (2005) Use of full field strains found by grating shearography to determine residual Stress. J Strain Anal 40(7):621-630 (Pubitemid 41568437)
98. Li K (1995) Interferometric 45° and 60° strain rosettes. Appl Opt 34:6376-6379
99. Li K (1997) Application of interferometric strain rosette to residual stress measurements. Opt Lasers Eng 27:125-136
100. Tjhung T, Li K (2003) Measurement of in-plane residual stresses varying with depth by the interferometric strain/slope rosette and incremental hole-drilling. J Eng Mater Technol 125(2):153-162
101. Li K, Ren W (2007) Application of miniature ring-core and interferometric strain/slope rosette to determine residual stress distribution with depth - part I: theories and part II - experiments. J Appl Mech 74(2):298-314
102. Sutton M, McNeill SR, Helm JD, Chao YJ (2000) Advances in two-dimensional and three-dimensional computer vision. In: Rastogi P (ed) Photomechanics, topics in applied physics 77. Springer, Berlin, pp 323-372
103. Sutton M (2008) Digital image correlation for shape and deformation measurements. In: Sharpe W (ed) Handbook of experimental solid mechanics. Springer, New York, pp 565-600
104. Schmidt T, Tyson J, Galanulis K (2003) Full-field dynamic displacement and strain measurement using advanced 3D image correlation photogrammetry, part I. Exp Techniques 27(3):47-50
105. Moser G, Lightner JG (2007) Using three-dimensional digital imaging correlation techniques to validate tire finite element model. Exp Techniques 31(4):29-36
106. McGinnis MJ, Pessiki S, Turker H (2005) Application of three-dimensional digital image correlation to the core-drilling method. Exp Mech 45(4):359-367 (Pubitemid 41236429)
107. Nelson DV, Makino A, Schmidt T (2006) Residual stress determination using hole drilling and 3D image correlation. Exp Mech 46(1):31-38 (Pubitemid 44080933)
108. Lord JD, Penn D, Whitehead P (2008) The application of digital image correlation for measuring residual stress by incremental hole drilling. Appl Mech Mater 13-14:65-73
109. Gao J, Shang H (2009) Deformation-pattern-based digital image correlation method and its application to residual stress measurement. Appl Opt 48:1371-1381
110. Sabate N, Vogel D, Gollhardt A, Keller J, Cane C, Gracia I, Morante JR, Michel B (2007) Residual stress measurement on a MEMS structure with high-spatial resolution. J Micromech Syst 16(2):365-372 (Pubitemid 46564214)
111. Kang KJ, Darzens S, Choi GS (2004) Effect of geometry and materials on residual stress measurement in thin films by using the focused ion beam. J Eng Mater Technol 126(4):457-464 (Pubitemid 40122733)
112. Sabate N, Vogel D, Gollhardt A, Keller J, Cane C, Gracia I, Morante JR, Michel B (2006) Measurement of residual stress by slot milling with focused ion-beam equipment. J Micromech Microeng 16(2):254-259 (Pubitemid 43146230)
113. Ma X, Lynch HE, Scully PC, Hutson MS (2009) Probing embryonic tissue mechanics with laser hole drilling. Phys Biol, doi: 10.1088/1478-3975/6/6/036004
114. Measurement of residual stresses by the hole-drilling strain-gage method, technical note TN-503-6 (2007) Vishay micromeasurements, Raleigh, NC
115. Nelson DV, Makino A (1996) Measurement of residual stresses in an undercut fillet of a diesel engine crankshaft, report for Deere & Co. Technical Center