Corrigendum to "Solution of the moiré hole drilling method using a finite-element-method-based approach" [Int. J. Solids Struct. 43 (2006) 6751-6766] (DOI:10.1016/j.ijsolstr.2006.02.010);Solution of the moiré hole drilling method using a finite-element-method-based approach

International Journal of Solids and Structures

Volumn 43, Issue 22-23, 2006, Pages 6751-6766

  Cárdenas García, Jaime F ^a   Preidikman, Sergio ^b  

^a UNIVERSITY OF TEXAS AT BROWNSVILLE   (United States)

^b DEPARTAMENTO DE QUÍMICA   (Argentina)

Author keywords

Finite element analysis; Hole drilling; Inverse problem; Least squares approach; Moir ; Optimization; Residual stresses

Indexed keywords

COMPUTER SIMULATION; FINITE ELEMENT METHOD; INVERSE PROBLEMS; LEAST SQUARES APPROXIMATIONS; OPTIMIZATION; RESIDUAL STRESSES; SAMPLING;

BIAXIAL LOADS; HOLE DRILLING; LEAST SQUARES APPROACH; MOIRE HOLE DRILLING METHOD;

DRILLING;

EID: 33748979906     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2006.11.029     Document Type: Erratum

References (34)

1. ASTM, 1998. ASTM E837-95: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method, Annual Book of Standards. American Society for Testing Materials, West Conshohoken, PA.
2. Cárdenas-García J.F. Determination of the elastic constants using moiré. Mechanics Research Communications 27 (2000) 69-77
3. Cárdenas-García J.F. Solution to the moiré hole method problem. Mechanics Research Communications 28 (2001) 13-32
4. Cárdenas-García J.F., and Verhaegh J.J.E. Catalogue of moiré fringes for a bi-axially-loaded infinite plate with a hole. Mechanics Research Communications 26 (1999) 641-648
5. Cárdenas-García J.F., and Verhaegh J.J.E. The practical use of the hole method in moiré. Mechanics Research Communications 26 (1999) 649-655
6. Cárdenas-García, J.F., Chasiotis, I., Cho, S., 2003. Thin film material parameters derived from full field nanometric displacement measurements in non-uniform MEMS geometries. Materials Research Society Fall Meeting, Boston, MA.
7. Cárdenas-García J.F., Shabana Y.M., and Medina R.A. Thermal loading and material property characterization of a functionally graded plate with a hole using an inverse problem methodology. Journal of Thermal Stresses 29 (2006) 1-20
8. Cho S., Cárdenas-García J.F., and Chasiotis I. Measurement of nano-displacements and elastic properties of MEMS via the microscopic hole method. Sensors and Actuators A: Physical 120 (2005) 163-171
9. Creath K., Cheng Y.-Y., and Wyant J.C. Contouring aspheric surfaces using two-wavelength phase-shifting interferometry. Optica Acta 32 (1985) 1455-1464
10. Dally J.W., and Riley W.F. Experimental Stress Analysis (1991), McGraw-Hill, New York
11. Furgiuele F.M., Pagnotta L., and Poggialini A. Measuring residual stresses by hole-drilling and coherent optics techniques: a numerical calibration. Transactions of the ASME: Journal of Engineering Materials and Technology 113 (1991) 41-50
12. Giannakopoulos A., and Suresh S. Indentation of solids with gradients in elastic properties: Part I. Point force. International Journal of Solids and Structures 33 (1997) 2357-2392
13. Giannakopoulos A., and Suresh S. Indentation of solids with gradients in elastic properties: Part II. Axisymmetric indenters. International Journal of Solids and Structures 33 (1997) 2393-2428
14. Kirsch G. Die theorie d. elastizitat u. d. bedurinisse d. festigkeitslehre. V.D.I. 42 (1998) 799
15. Makino A., and Nelson D.V. Determination of sub-surface distributions of residual stresses by a holographic hole-drilling technique. ASME Journal of Engineering Materials and Technology 119 (1997) 95-103
16. Nadai A., Baud R., and Wahl A. Stress distribution and plastic flow in an elastic plate with a circular hole. Mechanical Engineering 52 (1930) 187-192
17. Nicoletto G. Theoretical fringe analysis for a coherent optics method of residual stress measurement. Journal of Strain Analysis 23 (1988) 169-178
18. Nicoletto G. Moiré interferometry determination of residual stresses in the presence of gradients. Experimental Mechanics 31 (1991) 252-256
19. Ponslet E., and Steinzig M. Residual stress measurement using the hole drilling method and laser speckle interferometry. Part II: Analysis technique. Experimental Techniques 27 (2003) 17-21
20. Post D., Han B., and Ifju P. High Sensitivity Moiré (1994), Springer-Verlag, New York
21. Sanford R.J. Application of the least-squares method to photoelastic analysis. Experimental Mechanics 20 (1980) 192-197
22. Sanford R.J. Determining fracture parameters with full-field optical methods. Experimental Mechanics 29 (1989) 241-247
23. Sanford R.J., and Dally J.W. A general method for determining mixed mode stress intensity factors from isochromatic fringe patterns. Engineering Fracture Mechanics 11 (1979) 621-633
24. Schajer G.S. Applications of finite element calculations to residual stress measurements. ASME Journal of Engineering Materials and Technology 103 (1981) 157-163
25. Schajer G.S. Measurement of non-uniform residual stresses using the hole-drilling method. Part I-Stress calculation procedures. ASME Journal of Engineering Materials and Technology 110 (1988) 338-343
26. Schajer G.S. Measurement of non-uniform residual stresses using the hole-drilling method. Part II-Practical application of the integral method. ASME Journal of Engineering Materials and Technology 110 (1988) 344-349
27. Schajer G.S., and Altus E. Stress calculation error analysis for incremental hole-drilling residual stress measurements. ASME Journal of Engineering Materials and Technology 118 (1996) 120-126
28. Schwarz R.C., Kutt L.M., and Papazian J.M. Measurement of residual stress using interferometric moiré: a new insight. Experimental Mechanics 40 (2000) 271-281
29. Steinzig M., and Ponslet E. Residual stress measurement using the hole drilling method and laser speckle interferometry: Part I. Experimental Techniques 27 (2003) 43-46
30. Suresh S., Giannakopoulos A.E., and Alcala J. Spherical indentation of compositionally graded materials: theory and experiments. Acta Materiala 45 (1997) 1307-1321
31. Weissman E.M., and Post D. Full-field displacement and strain rosette by moiré interferometry. Experimental Mechanics 22 (1982) 324-328
32. Wu Z., Lu J., and Han B. Study of residual stresses by a combined method of moiré interferometry and incremental hole drilling. Part I: Theory. Transactions of the ASME: Journal of Applied Mechanics 65 (1998) 837-843
33. Wu Z., Lu J., and Han B. Study of residual stresses by a combined method of moiré interferometry and incremental hole drilling. Part II: Implementation. Transactions of the ASME: Journal of Applied Mechanics 65 (1998) 844-850
34. Young W.C. Roark's Formulas for Stress and Strain (1989), McGraw-Hill Book Company, New York, NY