Machining titanium and its alloys

Machining Science and Technology

Volumn 3, Issue 1, 1999, Pages 107-139

  Yang, Xiaoping ^a   Liu, C Richard ^a  

^a SCHOOL OF INDUSTRIAL ENGINEERING   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COST EFFECTIVENESS; MACHINABILITY; MACHINING; RESIDUAL STRESSES; STRESS ANALYSIS; TITANIUM ALLOYS;

SURFACE INTEGRITY;

TITANIUM;

EID: 0032666417     PISSN: 10910344     EISSN: None     Source Type: Journal    
DOI: 10.1080/10940349908945686     Document Type: Article

References (75)

1. S. K. Bhaumik, C. Divakar, and A. K. Singh, "Machining Ti-6A1-4V Alloy with a wBN-cBN Composite Tool," Materials & Design, 16(4) (1995) 221-226.
2. A. R. Machado and J. Wallbank, "Machining of Titanium and Its Alloys-A Review," Proc Instn Mech Engrs, Part B: Journal of Engineering Manufacture, 204(1990) 53-60.
3. H. E. Trucks, "Machining Titanium Alloys," Machine and Tool BLUE BOOK, 82(1)(1987) 39-41.
4. R. R. Boyer, "R&D and Applications Developments in the Titanium Industry in the USA," Titanium '95: Science and Technology, (1995) 41-50.
5. I. Gorynin, "Material Science and Ti-Production Problems," Titanium '92: Science and Technology, 1(1992) 65-73, Editors: F. H. Froes and I. L. Caplan, San Diego, California, June 29-July 2, the Minerals, Metals, and Materials Society.
6. K. Sakai, "New Development in Application of Titanium as an Ecological Metal: Non Aerospace Application/ Environment and Development," Titanium '92: Science and Technology, 3(1992) 2659-2671, Editors: F. H. Froes and I. L. Caplan, San Diego, California, June 29-July 2, the Minerals, Metals, and Materials Society.
7. J. D. Campbell, "A Comparison of Fluids Used to Superabrasively Machine a Titanium Alloy," International Gas Turbin and Aeroengine Congress and Exposition, ASME Papers, 91-GT-321, Orlando, FL, USA, 3-6 June (1991).
8. M. J. Donachie Jr., "Introduction to Titanium and Titanium Alloys," Titanium and Titanium Alloys-Source Book, A Collection of Outstanding Articles from the Technical Literature, 3-9, American Society for Metals (1982).
9. F. H. Froes, T.-L. Yau, and H. G. Weidinger, "Structure and Properties of Nonferrous Alloys, Chapter 8, Titanium, Zirconium, and Hafnium," 399-468 (1996), Materials Science and Technology, A Comprehensive Treatment, VCH Verlagsgesellschaft mbH and VCH Publishers Inc.
10. K. C. Adams, "State of the U.S. Titanium Industry," Titanium 1994 Products and Applications Proceedings of the Technical Program from the 1994 International Conference, 39-44 (1994), Titanium Development Association.
11. D. F. Hasson and C. H. Hamilton, "Forward," Editors: D. F. Hasson and C. H. Hamilton, Advanced Processing Methods for Titanium, page v, the Metallurgical Society of AIME (1982).
12. H. J. Siekmann, "How to Machine Titanium," the Tool Engineer, 78-82 (January, 1955).
13. R. Komanduri and W. R. Jr. Reed, "Evaluation of Carbide Grades and a New Cutting Geometry for Machining Titanium Alloys," Wear, 92 (1983) 113-123.
14. X. Yang and C. R. Liu, "Design for Manufacturability," In the Technology Management Handbook, 13-57-13-64 (1998), CRC Press LLC.
15. ASM Committee on Metallography of Titanium and Titanium Alloys, "Microstructure of Titanium and Titanium Alloys," Titanium and Titanium Alloys-Source Book, a Collection of Outstanding Articles from the Technical Literature, 33-42 (1982), American Society for Metals.
16. th Edition.
17. K. H. Miska, "Titanium and Its Alloys," Titanium and Titanium Alloys-Source Book, a Collection of Outstanding Articles from the Technical Literature, 10-19 (1982), American Society for Metals.
18. W. A. Reinsch, "Terminology for Titanium Microstructures," Metal Progress, 51-53(1982), American Society for Metals.
19. S. R. Seagle and L. J. Bartlo, "Physical Metallurgy and Metallography of Titanium Alloys," Metals Engineering Quarterly, 8(1968)1-10.
20. M. C. Shaw, "Metal Cutting Principles," Oxford Series on Advanced Manufacturing, Oxford University Press Inc., New York (1984).
21. M. C. Shaw, "The Assessment of Machinability," Proceedings of Conference on Machinability, 1-9, Royal Commonwealth Society, Graven Street, London WC2, 4-6 October 1965, Iron Steel Institute and the Institute of Metals.
22. J. F. Kahles, M. Field, D. Eylon, and F. H. Froes, "Machining of Titanium Alloys," Journal of Metals, 27-35 (April 1985).
23. Anonymous, "Tips for Aerospace Machining," Manufacturing Engineering, 67-69 (March 1993).
24. N. Zlatin and M. Field, "Procedures and Precautions in Machining Titanium Alloys," Titanium Science and Technology, 1(1973)489-504.
25. Z.-B. Hou and R. Konmanduri, "On a Thermomechanical Model of Shear Instability in Machining," Annals of the CIRP, 44(1995)69-73.
26. A. R. Shahan and A. K. Taheri, "Adiabatic Shear Bands in Titanium and Titanium Alloys: a Critical Review," Materials & Design, 14(4)(1993)243-250.
27. W. Konig and K. W. Schroder, "Facing Milling and Drilling of Titanium Alloys," Proc. Conf. On the Influence of Metallurgy on Machinability, ASM Tech., Ser. 7, 308-323 (October, 1975).
28. L. V. Colwell and W. C. Truckenmiller, "Cutting Chracteristics of Titanium and Its Alloys, " Mechanical Engineering, 461-480 (June, 1953).
29. H. C. Child and A. L. Dalton, "Machining of Titanium Alloys, Part I Metallurgical Factors Affecting Machinability," Proceedings of Conference on Machinability, 139-142, Royal Commonwealth Society, Graven Street, London WC2, 4-6 October 1965, Iron Steel Institute and the Institute of Metals.
30. S. Motonishi, S. Isoda, H. Itoh, Y. Tsumori, and Y. Terada, "Study on Machining of Titanium and Its Alloys," Kobelco Technology Review, 2(1987)28-31.
31. F. C. Jr. Schoenig and A. J. Jr. Atherton, "High Speed-High Productivity Machining of Titanium Alloys Using the Jet Assisted Machining Process," Titanium 1994 Products and Applications Proceedings of the Technical Program from the 1994 International Conference, 422-433(1994), Titanium Development Association.
32. E. Rabinowicz, "Frictional Properties of Titanium and Its Alloys," Metal Progress, 65(February 1954)107.
33. E. J. Catt and D. Milwain, "Machining of Titanium Alloys, Part 2 General Machining Behavior of Titanium," Proceedings of Conference on Machinability, 143-150, Royal Commonwealth Society, Graven Street, London WC2, 4-6 October 1965, Iron Steel Institute and the Institute of Metals.
34. H. Hong, A. T. Riga, J. M. Cahoon, and C. G. Scott, "Machinability of Steels and Titanmium Alloys Under Lubrication," Wear, 162-164(1993)34-39.
35. X. Yang, "Test Report for the Measurement of Residual Stress for Ground Ti-6A1-4V Alloy," School of Industrial Engineering, Purdue University (September 1997).
36. C. R. Liu and X. Yang, "The Scattering of the Residual Stress Produced by Turning and Grinding and Its Effect on fatigue Life," Submitted to Journal of Machining Science and Technology for Publication (1998).
37. th Edition.
38. F. Li, J. W. Brooks, X. P. Fu, and T. A. Dean, "High Temperature Stress Relaxation of a Ti-6A1-4V Alloy," Editors: P. A. Blenkinsop, W. J. Evans, and H. M. Flowers, Titanium '95 Science and Technology Proceedings of the Eighth World Conference on Titanium, 887-894, International Convention Center, Birmingham, UK, the Institute of Materials (October 1995).
39. J. S. Soni and G. Chakraverti, "Surface Chracteristics of Titanium with Rotary EDM," Bull. Mater. Sci., 16(3)(June 1993) 213-227.
40. E. Budak, Y. Altintas, and E. J. Armarego, "Prediction of Milling Force Coefficients From Orthogonal Cutting Data," Journal of Manufacturing Science and Engineering, Transaction of ASME, 118(1996)216-224.
41. G. Yucesan and Y. Altintas, "Improved Modelling of Cutting Force Coefficients in Peripheral Milling," Int. J. of Mach. Tools Manufact., 34(4)(1994)473-487.
42. G. Sathyarayanan, I. J. Lin, and M. Chen, "Neural Network Modeling and Muiltiobjective Optimization of Creep Feed Grinding of Superalloys," Int. J. Prod. Res., 30(10)(1992)2421-2438.
43. A. E. Bayoumi and J. Q. Xie, "Some Metallurgical Aspects of Chip Formation in Cutting Ti-6wt.%-4wt.%V Alloy," Materials Science and Engineering, A190(1995)173-178.
44. R. Konmanduri and B. F. von Turkovich, "New Observations on the Mechanism of Chip Formation When Machining Titanium Alloys," Wear, 69(1981)179-188.
45. R. Komanduri, T. A. Schroeder, D. K. Bandhopadhyay, and J. Hazra, "Titanium: A Model Material for Analysis of the High-Speed Machining Process," Editors: D. F. Hasson and C. H. Hamilton, Advanced Processing Methods for Titanium, 241-256(1982), the Metallurgical Society of AIME.
46. A. R. Machado and J. Wallbank, "The Effects of a High-Pressure Coolant Jet on Machining," Proc Instn Mech Engrs, Part B: Journal of Engineering Manufacture, 208(1994)29-38.
47. T. Obikawa and E. Usui, "Computational Machining of Titanium Alloy-Finite Element Modeling and a Few Results," Journal of Manufacturing Science and Engineering, Transactions of ASME, 118(1996)208-215.
48. B. F. von Turkovich and D. R. Durham, "Machining Titanium and Its Alloys," Editors: D. F. Hasson and C. H. Hamilton, Advanced Processing Methods for Titanium, 257-274(1982), the Metallurgical Society of AIME.
49. R. Komanduri, "Some Clarification on the Mechanics of Chip Formation When Machining Titanium Alloys," Wear, 76(1982)15-34.
50. O. W. Dillon, D. Angelis, W. Y. Lu, J. S. Gunasekera, and J. A. Deno, "The Effects of Temperature on the Machining of Metals," J. Materials Shaping Technology, 8(1)(1990)23-29.
51. W. Konig, "Applied Research on the Machinability of Titanium and Its Alloys," Proceedings of the Forty-seventh Meeting of AGARD, AGARD, CP256, 1.1-1.10(1979), AGARD Structural and Material Panel.
52. E. F. Smart and E. M. Trent, "Temperature Distribution in Tools Used for Cutting Iron, Titanium, and Nickel," Int J Prod Res, 13(May 1975)265-290.
53. R. M. Freeman, Ph.D. Thesis, University of Birmingham (1974).
54. N. Kumagai, K. Kameri, Y. Tanaka, T. Yoshimura, and M. Fuchigami, "The Grinding of a Ti-6A1-4V Alloy Under High Coolant Pressure," Editors: P. A. Blenkinsop, W. J. Evans, and H. M. Flowers, Titanium '95 Science and Technology Proceedings of the Eighth World Conference on Titanium, 790-804, International Convention Center, Birmingham, UK, the Institute of Materials (October 1995).
55. P. A. Dearnley and A. N. Grearson, "Evaluation of Principal Wear Mechanisms of Cemented Carbides and Ceramics Used for a Machining Titanium Alloy IMI 318," Materials Science and Technology, 2(January 1986)47-58.
56. P. D. Hartung and B. M. Kramer, "Tool Wear in Titanium Machining," Annals of the CIRP, 31/1(1982)75-80.
57. M. Lee, "The Failure Characteristics of Cutting Tools Machining Titanium at High Speed," Editors: D. F. Hasson and C. H. Hamilton, Advanced Processing Methods for Titanium, 275-287(1982), the Metallurgical Society of AIME.
58. B. A. Kolachev and Y. B. Egorova, "Machinohydrogen Treatment of Titanium Alloys," Editors: P. A. Blenkinsop, W. J. Evans, and H. M. Flowers, Titanium '95 Science and Technology Proceedings of the Eighth World Conference on Titanium, 782-789, International Convention Center, Birmingham, UK, the Institute of Materials (October 1995).
59. S. Mittal and C. R. Liu, "Method of Modeling Residual Stress in Superfinish Hard Turning," Wear, 218(1998)21-33.
60. C. R. Liu and S. Mittal, "Single-Step Superfinish Hard Machining-Feasibility and Feasible Cutting Conditions," Robotics and Computer Integrated Manufacturing, 12(1)(1996)15-27.
61. S. Mittal, "Feasibility of Single-Step Superfinish Hard Machining and Its Effect on Surface Integrity," Ph.D. thesis, Purdue University (1996). Major Professor, C. R. Liu.
62. R. Komanduri and R. H. Brown, "The Formation of Microcracks in Machining a Low carbon Steel," Metals and materials, 6(1972)531.
63. J. C. Lemaire and W. A. Backofen, "Adiabatic Instability in the Orthogonal Cutting of Steel," Metallurgical Trans., 3(1972)477-481.
64. R. F. Recht, "Catastrophic Thermoplastic Shear," Trans ASME, 86(1964)189-193.
65. S. L. Semiatin and S. B. Rao, "Shear Localization During Metal Cutting," Materials Science and Engineering, 61(1983)185-192.
66. M. C. Shaw and A. Vyas, "Chip Formation in the Machining of Hardened Steel," Annals of the CIRP, 42/1(1993)29-33.
67. th M.T.D.R. Conference, 241(1969).
68. Webster's Seventh New Collegiate Dictionary, G. & C. Merriam Company (1969).
69. N. Zlatin, "Machining Titanium Alloys," Modern Machine Shop, 42(12)(1970), 139-144.
70. S. S. Silin, B. N. Leonov, V. A. Khrulkov, A. V. Lobavov, V. A. Poletaev, and E. B. Danchenko, "Special Features of Deep Grinding of Titanium Alloys," Soviet Engineering Research, 9(1)(1989) 71-74.
71. K. F. Ehman, S. G. Kapoor, R. E. DeVor, and I. Lazoglu, "Machining Process Modeling: A Review," Journal of Manufacturing Science and Engineering, Transactions of ASME, 119(November 1997) 655-663.
72. M. E. Merchant, "Mechanics of Metal Cutting Process," Journal of Applied Physics, 16(1945)267-318.
73. J. Y. Wang and C. R. Liu, "A New Concept for Decoupling the Cutting Forces Due to Tool Flank Wear and Chip Formation in Hard Turning," Journal of Machining Science and Technology, 2(1)(1998)77-90.
74. J. Y. Wang and C. R. Liu, "On the Forces and Temperatures Due to Flank Wear in Hard Turning," Proceedings of the International Mechanical Engineering Congress, Nov., 1998.
75. J. Y. Wang and C. R. Liu, "The Effect of Tool Flank Wear on the Heat Transfer, Thermal Damage and Cutting Mechanics in Finish Hard Turning," submitted for publication in Annals of CIRP, 1999.