-
2
-
-
20444478658
-
Key improvements in the machining of difficult to cut aerospace superalloys
-
Ezugwu, E. O. Key improvements in the machining of difficult to cut aerospace superalloys. Int. J. Mach. Tools Mf, 2005, 45, 1353-1367.
-
(2005)
Int. J. Mach. Tools Mf
, vol.45
, pp. 1353-1367
-
-
Ezugwu, E.O.1
-
3
-
-
0033902759
-
Machinability of nickel based high temperature alloys
-
Arunachalam, R. and Mannan, M. A. Machinability of nickel based high temperature alloys. Mach. Sci. Technol., 2000, 4(1), 127-168.
-
(2000)
Mach. Sci. Technol
, vol.4
, Issue.1
, pp. 127-168
-
-
Arunachalam, R.1
Mannan, M.A.2
-
4
-
-
0032838561
-
Tool life and surface integrity when machining Inconel 718 with PVD and CVD coated tools
-
Ezugwu, E. O., Wang, Z. M., and Okeke, C. I. Tool life and surface integrity when machining Inconel 718 with PVD and CVD coated tools. Tribol. Trans., 1999, 42(2), 353-360.
-
(1999)
Tribol. Trans
, vol.42
, Issue.2
, pp. 353-360
-
-
Ezugwu, E.O.1
Wang, Z.M.2
Okeke, C.I.3
-
5
-
-
0032070998
-
Machinability of nickel base super alloys: A general review
-
Choudhury, I. A. and El-Baradie, M. A. Machinability of nickel base super alloys: a general review. J. Mater. Process. Technol., 1998, 77, 278-284.
-
(1998)
J. Mater. Process. Technol
, vol.77
, pp. 278-284
-
-
Choudhury, I.A.1
El-Baradie, M.A.2
-
6
-
-
0008345063
-
Tool life data when machining nickel based alloys with ceramic cutting tools
-
Queens University of Belfast
-
Richards, N., Currie, A. M., Aspinwall. D. K., Smith, D. J. M., and Dewes, R. C. Tool life data when machining nickel based alloys with ceramic cutting tools. In Proceedings of the Irish manufacturing conference, Queens University of Belfast, 1994, pp.13-21.
-
(1994)
Proceedings of the Irish manufacturing conference
, pp. 13-21
-
-
Richards, N.1
Currie, A.M.2
Aspinwall, D.K.3
Smith, D.J.M.4
Dewes, R.C.5
-
7
-
-
0033079230
-
The machinability of nickel based alloys - a review
-
Ezugwu, E. O., Wang, Z. M., and Machado, A. R. The machinability of nickel based alloys - a review. J. Mater. Process. Technol., 1999, 86, 1-16.
-
(1999)
J. Mater. Process. Technol
, vol.86
, pp. 1-16
-
-
Ezugwu, E.O.1
Wang, Z.M.2
Machado, A.R.3
-
8
-
-
0037430383
-
An overview of the machinability of aeroengine alloys
-
Ezugwu, E. O., Bonney, J., and Yamane, Y. An overview of the machinability of aeroengine alloys. J. Mater. Process. Technol., 2003, 134, 233-253.
-
(2003)
J. Mater. Process. Technol
, vol.134
, pp. 233-253
-
-
Ezugwu, E.O.1
Bonney, J.2
Yamane, Y.3
-
9
-
-
0030949662
-
Temperature and wear of cutting tools in high speed machining of Inconel 718 and Ti-6Al-6V-2Sn
-
Kitagawa, T., Kubo, A., and Maekawa, K. Temperature and wear of cutting tools in high speed machining of Inconel 718 and Ti-6Al-6V-2Sn. Wear, 1997, 202, 142-148.
-
(1997)
Wear
, vol.202
, pp. 142-148
-
-
Kitagawa, T.1
Kubo, A.2
Maekawa, K.3
-
10
-
-
0016506962
-
Temperature distribution in tools used for cutting iron, titanium and nickel
-
Smart, E. F. and Trent, E. M. Temperature distribution in tools used for cutting iron, titanium and nickel. Int. J. Prod. Res., 1975, 13(3), 265-290.
-
(1975)
Int. J. Prod. Res
, vol.13
, Issue.3
, pp. 265-290
-
-
Smart, E.F.1
Trent, E.M.2
-
11
-
-
0026238922
-
Super speeds for superalloys
-
October
-
Noaker, P. M. Super speeds for superalloys. Mfg Engng, 1991, October, 63-68.
-
(1991)
Mfg Engng
, pp. 63-68
-
-
Noaker, P.M.1
-
12
-
-
0030830490
-
The machinability of Inconel 718
-
Rahman, M., Seah, W. K. H., and Teo, T. T. The machinability of Inconel 718. J. Mater. Process. Technol., 1997, 63, 199-204.
-
(1997)
J. Mater. Process. Technol
, vol.63
, pp. 199-204
-
-
Rahman, M.1
Seah, W.K.H.2
Teo, T.T.3
-
13
-
-
0034294579
-
Temperature reduction in the cutting zone in water-jet assisted turning
-
Kaminski, J. and Alvelid, B. Temperature reduction in the cutting zone in water-jet assisted turning. J. Mater. Process. Technol., 2000, 106, 68-73.
-
(2000)
J. Mater. Process. Technol
, vol.106
, pp. 68-73
-
-
Kaminski, J.1
Alvelid, B.2
-
14
-
-
85072489125
-
Hi-jet system for increasing tool life
-
Pigott, R. J. S. and Colwell, A. T. Hi-jet system for increasing tool life. SAE Q. Trans., 1952, 6(2), 547-558.
-
(1952)
SAE Q. Trans
, vol.6
, Issue.2
, pp. 547-558
-
-
Pigott, R.J.S.1
Colwell, A.T.2
-
15
-
-
0142153890
-
High-pressure jet-assisted cooling: A new possibility for near net shape turning of decarburised steel
-
Dahlman, P. and Escursell, M. High-pressure jet-assisted cooling: a new possibility for near net shape turning of decarburised steel. Int. J. Mfg Technol., 2004, 44, 109-115.
-
(2004)
Int. J. Mfg Technol
, vol.44
, pp. 109-115
-
-
Dahlman, P.1
Escursell, M.2
-
16
-
-
0031641373
-
Tool performance and chip control when machining Ti6Al4V and Inconel 901 using high pressure coolant supply
-
Machado, A. R., Wallbank, J., Pashby, I. R., and Ezugwu, E. O. Tool performance and chip control when machining Ti6Al4V and Inconel 901 using high pressure coolant supply. Mach. Sci. Technol., 1998, 2(1), 1-12.
-
(1998)
Mach. Sci. Technol
, vol.2
, Issue.1
, pp. 1-12
-
-
Machado, A.R.1
Wallbank, J.2
Pashby, I.R.3
Ezugwu, E.O.4
-
17
-
-
0343090883
-
Using high pressure coolant in the drilling and turning of low machinability alloys
-
Lopez de Lacalle, L. N., Perez-Bilbatua, J., Sanchez, J. A., Llórente, J. I., Gutierrez, A., and Alboniga, J. Using high pressure coolant in the drilling and turning of low machinability alloys. Int. J. Mfg Technol., 2000, 16, 85-91.
-
(2000)
Int. J. Mfg Technol
, vol.16
, pp. 85-91
-
-
Lopez de Lacalle, L.N.1
Perez-Bilbatua, J.2
Sanchez, J.A.3
Llórente, J.I.4
Gutierrez, A.5
Alboniga, J.6
-
18
-
-
9444274053
-
Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools
-
Ezugwu, E. O. and Bonney, J. Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools. J.. Mater. Process. Technol, 2004, 153-154, 1045-1050.
-
(2004)
J.. Mater. Process. Technol
, vol.153-154
, pp. 1045-1050
-
-
Ezugwu, E.O.1
Bonney, J.2
-
19
-
-
0033713699
-
High speed ball nose end milling of Inconel 718
-
Ng, E.G., Lee, D. W., Sharman, A. R. C., Dewes, R. C., and Aspinwall, D. K. High speed ball nose end milling of Inconel 718. Ann. CIRP, 2000, 49(1), 41-46.
-
(2000)
Ann. CIRP
, vol.49
, Issue.1
, pp. 41-46
-
-
Ng, E.G.1
Lee, D.W.2
Sharman, A.R.C.3
Dewes, R.C.4
Aspinwall, D.K.5
-
20
-
-
0017538803
-
Surface damage during machining of solution treated and aged 18% nickel maraging steel - part 2 lubricated conditions
-
Bailey, J. A. Surface damage during machining of solution treated and aged 18% nickel maraging steel - part 2 lubricated conditions. Wear, 1977, 44, 371-376.
-
(1977)
Wear
, vol.44
, pp. 371-376
-
-
Bailey, J.A.1
-
21
-
-
5144233111
-
The measurement of residual stresses by the incremental hole drilling technique
-
August
-
Grant, P. V., Lord, J. D., and Whitehead, P. S. The measurement of residual stresses by the incremental hole drilling technique. National Physical Laboratory Good Practise Guide No. 53, August 2002.
-
(2002)
National Physical Laboratory Good Practise Guide
, Issue.53
-
-
Grant, P.V.1
Lord, J.D.2
Whitehead, P.S.3
-
22
-
-
33751148795
-
Machining of nickel-based superalloy using PcBN endmill tool
-
Shintani, K., Kato, H., Ohshima, A., and Kohno, Y. Machining of nickel-based superalloy using PcBN endmill tool. Int. J. Jap. Soc. Precis. Engrs, 1996, 30(4), 323-325.
-
(1996)
Int. J. Jap. Soc. Precis. Engrs
, vol.30
, Issue.4
, pp. 323-325
-
-
Shintani, K.1
Kato, H.2
Ohshima, A.3
Kohno, Y.4
-
23
-
-
0035245906
-
High efficiency cutting of super heat resistance alloy
-
Yamamoto, K., Kuroda, M., Omokawa, H., and Itakura, K. High efficiency cutting of super heat resistance alloy. Mitsubishi Ind. Tech. Rev., 2001, 38(1), 12-16.
-
(2001)
Mitsubishi Ind. Tech. Rev
, vol.38
, Issue.1
, pp. 12-16
-
-
Yamamoto, K.1
Kuroda, M.2
Omokawa, H.3
Itakura, K.4
-
24
-
-
0030111764
-
Carbide tool wear mechanism in turning of Inconel 718 superalloy
-
Liao, Y. S. and Shiue, R. H. Carbide tool wear mechanism in turning of Inconel 718 superalloy. Wear, 1996, 193, 16-24.
-
(1996)
Wear
, vol.193
, pp. 16-24
-
-
Liao, Y.S.1
Shiue, R.H.2
-
25
-
-
0031193511
-
Failure mechanism of a whisker reinforced ceramic tool when machining nickel based alloys
-
Jun, Z., Jianxin, D., Jianhua, Z., and Xing, A. Failure mechanism of a whisker reinforced ceramic tool when machining nickel based alloys. Wear, 1997, 208, 220-225.
-
(1997)
Wear
, vol.208
, pp. 220-225
-
-
Jun, Z.1
Jianxin, D.2
Jianhua, Z.3
Xing, A.4
-
26
-
-
9744250177
-
Workpiece surface integrity and tool life issues when turning Inconel 718™ nickel based superalloy
-
Sharman, A. R. C., Hughes, J. I., and Ridgway, K. Workpiece surface integrity and tool life issues when turning Inconel 718™ nickel based superalloy. J. Mach. Sci. Technol., 2004, 8(3), 1-16.
-
(2004)
J. Mach. Sci. Technol
, vol.8
, Issue.3
, pp. 1-16
-
-
Sharman, A.R.C.1
Hughes, J.I.2
Ridgway, K.3
-
27
-
-
0030286337
-
Study of the jet-flow rate of cooling in machining part 2: Simulation study
-
Li, X. Study of the jet-flow rate of cooling in machining part 2: simulation study. J. Mater. Process. Technol., 1996, 62, 157-165.
-
(1996)
J. Mater. Process. Technol
, vol.62
, pp. 157-165
-
-
Li, X.1
-
28
-
-
0022513074
-
Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMIi 318
-
Dearnley, P. A. and Grearson, A. N. Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMIi 318. Mater. Sci. Technol., 1986, 2, 47-58.
-
(1986)
Mater. Sci. Technol
, vol.2
, pp. 47-58
-
-
Dearnley, P.A.1
Grearson, A.N.2
-
29
-
-
0023109640
-
Surface region damage of machined Inconel 718 nickel base superalloy using natural and controlled contact length tools
-
Sadat, A. B. Surface region damage of machined Inconel 718 nickel base superalloy using natural and controlled contact length tools. Wear, 1987, 119, 225-235.
-
(1987)
Wear
, vol.119
, pp. 225-235
-
-
Sadat, A.B.1
-
30
-
-
0026928263
-
Surface integrity of Inconel 718 nickel base superalloy using controlled and natural contact length tools. Part 1: Lubricated
-
September
-
Sadat, A. B. and Reddy, M. Y. Surface integrity of Inconel 718 nickel base superalloy using controlled and natural contact length tools. Part 1: lubricated. Expl. Mech., 1992, September, 282-288.
-
(1992)
Expl. Mech
, pp. 282-288
-
-
Sadat, A.B.1
Reddy, M.Y.2
-
31
-
-
0027867411
-
Surface integrity of Inconel 718 nickel base superalloy using controlled and natural contact length tools. Part 2: Unlubricated
-
December
-
Sadat, A. B. and Reddy, M. Y. Surface integrity of Inconel 718 nickel base superalloy using controlled and natural contact length tools. Part 2: unlubricated. Expl. Mech., 1993, December, 343-348.
-
(1993)
Expl. Mech
, pp. 343-348
-
-
Sadat, A.B.1
Reddy, M.Y.2
-
32
-
-
0029408847
-
Surface abuse when machining cast iron (G-17) and nickel base superalloy (Inconel 718) with ceramic tools
-
Ezugwu, E. O. and Tang, S. H. Surface abuse when machining cast iron (G-17) and nickel base superalloy (Inconel 718) with ceramic tools. J. Mater. Process. Technol., 1995, 55, 63-69.
-
(1995)
J. Mater. Process. Technol
, vol.55
, pp. 63-69
-
-
Ezugwu, E.O.1
Tang, S.H.2
-
33
-
-
0036430646
-
Residual stresses in a nickel-based superalloy introduced by turning
-
Schlaurer, C., Peng, R. L., and Oden, M. Residual stresses in a nickel-based superalloy introduced by turning. Mater. ScL Forum, 2002, 404-407, 173-178.
-
(2002)
Mater. ScL Forum
, vol.404-407
, pp. 173-178
-
-
Schlaurer, C.1
Peng, R.L.2
Oden, M.3
-
34
-
-
33644775712
-
An analysis of the residual stress generated in Inconel 718™ when turning
-
Sharman, A. R. C., Hughes, J. I., and Ridgway, K. An analysis of the residual stress generated in Inconel 718™ when turning. J. Mater. Process. Technol., 2006, 173, 359-367.
-
(2006)
J. Mater. Process. Technol
, vol.173
, pp. 359-367
-
-
Sharman, A.R.C.1
Hughes, J.I.2
Ridgway, K.3
-
35
-
-
1642303244
-
Surface hardening of AISI 4340 steel by machining: A preliminary investigation
-
Chou, Y. K. Surface hardening of AISI 4340 steel by machining: a preliminary investigation. J. Mater. Process. Technol., 2002, 124, 171-177.
-
(2002)
J. Mater. Process. Technol
, vol.124
, pp. 171-177
-
-
Chou, Y.K.1
|