-
2
-
-
0031209697
-
Titanium alloys and their machinability - A review
-
Ezugwu E.O., Wang Z.M. Titanium alloys and their machinability - a review. J Mater Process Technol. 68(3):1997;262-274.
-
(1997)
J Mater Process Technol
, vol.68
, Issue.3
, pp. 262-274
-
-
Ezugwu, E.O.1
Wang, Z.M.2
-
3
-
-
0031144394
-
Advanced coated ceramic tools for machining superalloys
-
Gatto A., Iuliano L. Advanced coated ceramic tools for machining superalloys. Int J Mach Tools Manufacture. 37(5):1997;591-605.
-
(1997)
Int J Mach Tools Manufacture
, vol.37
, Issue.5
, pp. 591-605
-
-
Gatto, A.1
Iuliano, L.2
-
4
-
-
0030949662
-
Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn
-
Maekawa K., Kitagawa T., Kubo A. Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn. Wear. 202(2):1997;142-148.
-
(1997)
Wear
, vol.202
, Issue.2
, pp. 142-148
-
-
Maekawa, K.1
Kitagawa, T.2
Kubo, A.3
-
5
-
-
0030151024
-
Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials
-
El-Wardany T.I., Mohammed E., Elbestawi M.A. Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials. Int J Mach Tools Manufacture. 36(5):1996;611-634.
-
(1996)
Int J Mach Tools Manufacture
, vol.36
, Issue.5
, pp. 611-634
-
-
El-Wardany, T.I.1
Mohammed, E.2
Elbestawi, M.A.3
-
6
-
-
0030111764
-
Carbide tool wear mechanism in turning of Inconel 718 superalloy
-
Liao Y.S., Shiue R.H. Carbide tool wear mechanism in turning of Inconel 718 superalloy. Wear. 193(1):1996;16-24.
-
(1996)
Wear
, vol.193
, Issue.1
, pp. 16-24
-
-
Liao, Y.S.1
Shiue, R.H.2
-
7
-
-
0033879201
-
Development of new ceramic cutting tools with alumina coated carbide powders
-
Huang C.Z., Wang J., Ai X. Development of new ceramic cutting tools with alumina coated carbide powders. Int J Mach Tools Manufacture. 40(6):2000;823-832.
-
(2000)
Int J Mach Tools Manufacture
, vol.40
, Issue.6
, pp. 823-832
-
-
Huang, C.Z.1
Wang, J.2
Ai, X.3
-
8
-
-
0033165518
-
Cuttability investigation of coated carbides
-
Jawaid A., Olajire Kabiru A. Cuttability investigation of coated carbides. Mater Manufact Process. 14(4):1999;559-580.
-
(1999)
Mater Manufact Process
, vol.14
, Issue.4
, pp. 559-580
-
-
Jawaid, A.1
Olajire Kabiru, A.2
-
9
-
-
0032667029
-
Mechanical behaviour of PVD- And CVD-coated hard metals under cyclic loads
-
Schlund P., Kindermann P., Sockel H-.G., Schleinkofer U., Heinrich W., Görting K. Mechanical behaviour of PVD- and CVD-coated hard metals under cyclic loads. Int J Refractory Met Hard Mater. 17(1-3):1999;193-199.
-
(1999)
Int J Refractory Met Hard Mater
, vol.17
, Issue.13
, pp. 193-199
-
-
Schlund, P.1
Kindermann, P.2
Sockel, H.-g.3
Schleinkofer, U.4
Heinrich, W.5
Görting, K.6
-
10
-
-
0033499872
-
Wear of advanced ceramics for tool materials
-
D'Errico G.E., Bugliosi S., Calzavarini R., Cuppini D. Wear of advanced ceramics for tool materials. Wear. 225-229(Part 1):1999;267-272.
-
(1999)
Wear
, vol.225-229
, Issue.PART 1
, pp. 267-272
-
-
D'Errico, G.E.1
Bugliosi, S.2
Calzavarini, R.3
Cuppini, D.4
-
11
-
-
0029257019
-
Effects of machining conditions on the flank wear of TiN-coated high speed steel tool inserts
-
Lim S.C., Lim C.Y.H., Lee K.S. Effects of machining conditions on the flank wear of TiN-coated high speed steel tool inserts. Wear. 181-183(2):1995;901-912.
-
(1995)
Wear
, vol.181-183
, Issue.2
, pp. 901-912
-
-
Lim, S.C.1
Lim, C.Y.H.2
Lee, K.S.3
-
12
-
-
18144444556
-
Chemical wear mechanisms of innovative ceramic cutting tools in the machining of steel
-
67
-
Vleugels J, Van Der Biest O. Chemical wear mechanisms of innovative ceramic cutting tools in the machining of steel. Wear 1999;225-229(Part 1):285-94, 67.
-
(1999)
Wear
, vol.225-229
, Issue.PART 1
, pp. 285-294
-
-
Vleugels, J.1
Van Der Biest, O.2
-
14
-
-
0003170293
-
Machining tests on multi-layer coated cemented carbide cutting tools
-
Larrson M. Machining tests on multi-layer coated cemented carbide cutting tools. Met Powder Rep. 52(12):1997;45.
-
(1997)
Met Powder Rep
, vol.52
, Issue.12
, pp. 45
-
-
Larrson, M.1
-
15
-
-
0031260754
-
Tool wear mechanism in continuous cutting of hardened tool steels
-
Chou Y.K., Evans C.J. Tool wear mechanism in continuous cutting of hardened tool steels. Wear. 212(1):1997;59-65.
-
(1997)
Wear
, vol.212
, Issue.1
, pp. 59-65
-
-
Chou, Y.K.1
Evans, C.J.2
-
16
-
-
0031190490
-
Cutting performance of advanced ceramic tools
-
Huang, Chuanzhen, Ai, Xing, Li, Zhaoqian. Cutting performance of advanced ceramic tools. Amer Ceramic Soc Bull 1997;76(7):83-5.
-
(1997)
Amer Ceramic Soc Bull
, vol.76
, Issue.7
, pp. 83-85
-
-
Huang, C.1
Ai, X.2
Li, Z.3
-
17
-
-
0033873953
-
CVD diamond: Controlling structure and morphology
-
Ahmed W., Rego C.A., Cherry R., Afzal A., Ali N., Hassan I.U. CVD diamond. controlling structure and morphology Vacuum. 56(3):2000;153-158.
-
(2000)
Vacuum
, vol.56
, Issue.3
, pp. 153-158
-
-
Ahmed, W.1
Rego, C.A.2
Cherry, R.3
Afzal, A.4
Ali, N.5
Hassan, I.U.6
-
18
-
-
0033490185
-
Tribological properties of smooth diamond coatings for cutting tools
-
Le Huu T., Schmitt M., Paulmier D., Mamalis A.G., Grabchenko A. Tribological properties of smooth diamond coatings for cutting tools. Wear. 225-229(Part 2):1999;843-847.
-
(1999)
Wear
, vol.225-229
, Issue.PART 2
, pp. 843-847
-
-
Le Huu, T.1
Schmitt, M.2
Paulmier, D.3
Mamalis, A.G.4
Grabchenko, A.5
-
19
-
-
0033101864
-
Development of monitoring system on the diamond tool wear
-
In-Hyu Choi, Jeong-Du Kim. Development of monitoring system on the diamond tool wear. Int J Mach Tools Manufacture 1999;39(3):505-15.
-
(1999)
Int J Mach Tools Manufacture
, vol.39
, Issue.3
, pp. 505-515
-
-
In-Hyu, C.1
Jeong-Du, K.2
-
20
-
-
0032620587
-
Diamond-coated tools
-
Faure C., Hänni W., Julia Schmutz C., Gervanoni M. Diamond-coated tools. Diamond Related Mater. 8(2-5):1999;830-833.
-
(1999)
Diamond Related Mater
, vol.8
, Issue.25
, pp. 830-833
-
-
Faure, C.1
Hänni, W.2
Julia Schmutz, C.3
Gervanoni, M.4
-
21
-
-
0343384427
-
Diamond coatings on cemented tungsten carbide tools by low-pressure microwave CVD
-
Mallika K., Komanduri R. Diamond coatings on cemented tungsten carbide tools by low-pressure microwave CVD. Wear. 224(2):1999;245-266.
-
(1999)
Wear
, vol.224
, Issue.2
, pp. 245-266
-
-
Mallika, K.1
Komanduri, R.2
-
22
-
-
0003221045
-
Diamond coated silicon nitride cutting tool inserts
-
Yu R.S. Diamond coated silicon nitride cutting tool inserts. Met Powder Rep. 52(6):1997;39.
-
(1997)
Met Powder Rep
, vol.52
, Issue.6
, pp. 39
-
-
Yu, R.S.1
-
23
-
-
0033078433
-
Optimization of cutting parameters for maximizing tool life
-
Choudhury S.K., Appa Rao I.V.K. Optimization of cutting parameters for maximizing tool life. Int J Mach Tools Manufacture. 39(2):1999;343-353.
-
(1999)
Int J Mach Tools Manufacture
, vol.39
, Issue.2
, pp. 343-353
-
-
Choudhury, S.K.1
Appa Rao, I.V.K.2
-
24
-
-
0003175719
-
Production of diamond impregnated cutting tools
-
Dwan J.D. Production of diamond impregnated cutting tools. Met Powder Rep. 54(1):1999;37.
-
(1999)
Met Powder Rep
, vol.54
, Issue.1
, pp. 37
-
-
Dwan, J.D.1
-
25
-
-
0032194321
-
Silicon carbonitride: A rival to cubic boron nitride
-
Badzian A., Badzian T., Drawl W.D., Roy R. Silicon carbonitride. a rival to cubic boron nitride Diamond Rel Mater. 7(10):1998;1519-1525.
-
(1998)
Diamond Rel Mater
, vol.7
, Issue.10
, pp. 1519-1525
-
-
Badzian, A.1
Badzian, T.2
Drawl, W.D.3
Roy, R.4
-
26
-
-
0003169824
-
Diamond and cubic boron nitride coatings for tools
-
Klages C.P. Diamond and cubic boron nitride coatings for tools. Met Powder Rep. 53(2):1998;40.
-
(1998)
Met Powder Rep
, vol.53
, Issue.2
, pp. 40
-
-
Klages, C.P.1
-
27
-
-
0000152902
-
Cubic boron nitride for cutting nickel base materials
-
Petrusha I.A. Cubic boron nitride for cutting nickel base materials. Met Powder Rep. 53(2):1998;41.
-
(1998)
Met Powder Rep
, vol.53
, Issue.2
, pp. 41
-
-
Petrusha, I.A.1
-
28
-
-
0031701882
-
Diamond turning of silicon substrates in ductile-regime
-
Leung T.P., Lee W.B., Lu X.M. Diamond turning of silicon substrates in ductile-regime. J Mater Process Technol. 73(1-3):1998;42-48.
-
(1998)
J Mater Process Technol
, vol.73
, Issue.13
, pp. 42-48
-
-
Leung, T.P.1
Lee, W.B.2
Lu, X.M.3
-
29
-
-
0031628773
-
Diamond coatings and cBN coatings for tools
-
Klages C-.P., Fryda M., Matthée T., Schäfer L., Dimigen H. Diamond coatings and cBN coatings for tools. Int J Refractory Met Hard Mater. 16(3):1998;171-176.
-
(1998)
Int J Refractory Met Hard Mater
, vol.16
, Issue.3
, pp. 171-176
-
-
Klages, C.-p.1
Fryda, M.2
Matthée, T.3
Schäfer, L.4
Dimigen, H.5
-
30
-
-
0031148083
-
Tear-off wear mechanism of sintered diamond tool in cutting SiC-particle-strengthened epoxy composites
-
Afaghani J.E.D., Yamaguchi K., Nakamoto T., Yoshino K. Tear-off wear mechanism of sintered diamond tool in cutting SiC-particle-strengthened epoxy composites. Wear. 206(1-2):1997;221-229.
-
(1997)
Wear
, vol.206
, Issue.12
, pp. 221-229
-
-
Afaghani, J.E.D.1
Yamaguchi, K.2
Nakamoto, T.3
Yoshino, K.4
-
31
-
-
0001736088
-
The new diamond-coated carbide cutting tools
-
Oles E.J., Inspektor A., Bauer C.E. The new diamond-coated carbide cutting tools. Diamond Rel Mater. 5(6-8):1996;617-624.
-
(1996)
Diamond Rel Mater
, vol.5
, Issue.68
, pp. 617-624
-
-
Oles, E.J.1
Inspektor, A.2
Bauer, C.E.3
-
32
-
-
0003175721
-
Wear resisting properties applications of polycrystalline diamond
-
Cook M. Wear resisting properties applications of polycrystalline diamond. Met Powder Rep. 52(4):1997;46.
-
(1997)
Met Powder Rep
, vol.52
, Issue.4
, pp. 46
-
-
Cook, M.1
-
36
-
-
85031528230
-
-
PhD. thesis, University of Birmingham, UK
-
Freeman NRM, PhD. thesis, University of Birmingham, UK, 1986.
-
(1986)
-
-
Freeman, N.R.M.1
-
38
-
-
0031270137
-
Built-up edge analysis of orthogonal cutting by the visco-plastic finite-element method
-
Jeong-Du Kim, Marinov VR, Dong-Sik Kim, Built-up edge analysis of orthogonal cutting by the visco-plastic finite-element method. J Mater Process Technol 1997;71(3):367-72.
-
(1997)
J Mater Process Technol
, vol.71
, Issue.3
, pp. 367-372
-
-
Jeong-Du, K.1
Marinov, V.R.2
Dong-Sik, K.3
-
39
-
-
0032003193
-
Prediction of chip flow direction, cutting forces and surface roughness in finish turning
-
Arsecularatne J.A., Fowle R.F., Mathew P. Prediction of chip flow direction, cutting forces and surface roughness in finish turning. J Manufacturing Sci Engng Trans ASME. 120(1):1998;1-12.
-
(1998)
J Manufacturing Sci Engng Trans ASME
, vol.120
, Issue.1
, pp. 1-12
-
-
Arsecularatne, J.A.1
Fowle, R.F.2
Mathew, P.3
-
40
-
-
0029256284
-
Built-up edge elimination in mirror cutting of hardened steel
-
Oishi K. Built-up edge elimination in mirror cutting of hardened steel. J Engng Ind Trans ASME. 117(1):1995;62-66.
-
(1995)
J Engng Ind Trans ASME
, vol.117
, Issue.1
, pp. 62-66
-
-
Oishi, K.1
-
41
-
-
0031645286
-
New concept for decoupling the cutting forces due to tool flank wear and chip formation in hard turning
-
Wang J.Y., Liu C.R. New concept for decoupling the cutting forces due to tool flank wear and chip formation in hard turning. Mach Sci Technol. 2(1):1998;77-90.
-
(1998)
Mach Sci Technol
, vol.2
, Issue.1
, pp. 77-90
-
-
Wang, J.Y.1
Liu, C.R.2
-
44
-
-
0004085522
-
-
London: Butterworth Scientific Publications
-
McQuillan M.K. Titanium. 1956;Butterworth Scientific Publications, London.
-
(1956)
Titanium
-
-
McQuillan, M.K.1
|