메뉴 건너뛰기




Volumn 35, Issue 3-4, 2007, Pages 255-267

Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining

Author keywords

Arbitrary Lagrangian Eulerian method; Edge roundness; Finite element modeling; Machining induced stresses

Indexed keywords

COMPUTER SIMULATION; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; LAGRANGE MULTIPLIERS; OPTIMIZATION; RESIDUAL STRESSES;

EID: 38349140123     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-006-0720-2     Document Type: Article
Times cited : (138)

References (37)
  • 1
    • 0020246951 scopus 로고
    • Mechanics of machining-from descriptive to predictive theory. In: On the art of cutting metals-75 years later
    • Usui E, Shirakashi T (1982) Mechanics of machining-from descriptive to predictive theory. In on the art of cutting metals-75 years later. ASME Pub PED 7:13-35
    • (1982) ASME Pub PED , vol.7 , pp. 13-35
    • Usui, E.1    Shirakashi, T.2
  • 2
    • 0026206219 scopus 로고
    • Finite element modeling of orthogonal metal cutting
    • 3
    • Komvopoulos K, Erpenbeck SA (1991) Finite element modeling of orthogonal metal cutting. ASME J Eng Ind 113(3):253-267
    • (1991) ASME J Eng Ind , vol.113 , pp. 253-267
    • Komvopoulos, K.1    Erpenbeck, S.A.2
  • 3
    • 0026851240 scopus 로고
    • A coupled finite element model of thermo-elastic-plastic large deformation for orthogonal cutting
    • Lin ZC, Lin SY (1992) A coupled finite element model of thermo-elastic-plastic large deformation for orthogonal cutting. ASME J Eng Ind 114:218-226
    • (1992) SME J Eng Ind , vol.114 , pp. 218-226
    • Lin, Z.C.1    Lin, S.Y.2
  • 4
    • 0028480178 scopus 로고
    • Finite element simulation of chip formation and comparison with machining experiment
    • 8
    • Zhang B, Bagchi A (1994) Finite element simulation of chip formation and comparison with machining experiment. ASME J Eng Ind 116(8):289-297
    • (1994) ASME J Eng Ind , vol.116 , pp. 289-297
    • Zhang, B.1    Bagchi, A.2
  • 5
    • 0029256283 scopus 로고
    • Finite element simulation of orthogonal metal cutting
    • Shih AJ (1995) Finite element simulation of orthogonal metal cutting. ASME J Eng Ind 117:84-93
    • (1995) ASME J Eng Ind , vol.117 , pp. 84-93
    • Shih, A.J.1
  • 6
    • 0022160698 scopus 로고
    • A finite element model of orthogonal metal cutting
    • Strenkowski JS, Carroll JT (1985) A finite element model of orthogonal metal cutting. ASME J Eng Ind 107:346-354
    • (1985) ASME J Eng Ind , vol.107 , pp. 346-354
    • Strenkowski, J.S.1    Carroll, J.T.2
  • 7
    • 0000770494 scopus 로고
    • Finite element models of orthogonal cutting with application to single point diamond turning
    • 12
    • Strenkowski JS, Carroll JT (1986) Finite element models of orthogonal cutting with application to single point diamond turning. Int J Mech Sci 30(12):899-920
    • (1986) Int J Mech Sci , vol.30 , pp. 899-920
    • Strenkowski, J.S.1    Carroll, J.T.2
  • 8
    • 0030288645 scopus 로고    scopus 로고
    • An evaluation of chip separation criteria for the FEM simulation of machining
    • Black JT, Huang JM (1996) An evaluation of chip separation criteria for the FEM simulation of machining. ASME J Manuf Sci Eng 118 545-553
    • (1996) ASME J Manuf Sci Eng , vol.118 , pp. 545-553
    • Black, J.T.1    Huang, J.M.2
  • 10
    • 0029408920 scopus 로고
    • Modeling and simulation of high-speed machining
    • Marusich TD, Ortiz M (1995) Modeling and simulation of high-speed machining. Int J Numer Methods Eng 38:3675-3694
    • (1995) Int J Numer Methods Eng , vol.38 , pp. 3675-3694
    • Marusich, T.D.1    Ortiz, M.2
  • 11
    • 0030143663 scopus 로고    scopus 로고
    • Application of 2-D FEM to chip formation in orthogonal cutting
    • 1-2
    • Ceretti E, Fallböhmer P, Wu WT, Altan T (1996) Application of 2-D FEM to chip formation in orthogonal cutting. J Mate Process Technol 59(1-2):169-181
    • (1996) J Mate Process Technol , vol.59 , pp. 169-181
    • Ceretti, E.1    Fallböhmer, P.2    Wu, W.T.3    Altan, T.4
  • 13
    • 0342592525 scopus 로고    scopus 로고
    • Determination of workpiece flow stress and friction at the chip-tool contact for high-speed cutting
    • 1
    • Özel T, Altan T (2000) Determination of workpiece flow stress and friction at the chip-tool contact for high-speed cutting. Int J Mach Tools Manuf 40(1):133-152
    • (2000) Int J Mach Tools Manuf , vol.40 , pp. 133-152
    • Özel, T.1    Altan, T.2
  • 15
    • 0035683095 scopus 로고    scopus 로고
    • 2D-FEM simulation of the orthogonal high speed cutting process
    • 3
    • Klocke F, Raedt H-W, Hoppe S (2001) 2D-FEM simulation of the orthogonal high speed cutting process. Machi Sci Technol 5(3):323-340
    • (2001) Machi Sci Technol , vol.5 , pp. 323-340
    • Klocke, F.1    Raedt, H.-W.2    Hoppe, S.3
  • 16
    • 0036501492 scopus 로고    scopus 로고
    • A finite element model of high speed metal cutting with adiabatic shearing
    • Baker M, Rosler J, Siemers C (2002) A finite element model of high speed metal cutting with adiabatic shearing. Comput Struct 80:495-513
    • (2002) Comput Struct , vol.80 , pp. 495-513
    • Baker, M.1    Rosler, J.2    Siemers, C.3
  • 17
    • 0027885323 scopus 로고
    • Arbitrary Lagrangian-Eulerian thermomechanical finite element model of material cutting
    • 12
    • Rakotomalala R, Joyot P, Touratier M (1993) Arbitrary Lagrangian-Eulerian thermomechanical finite element model of material cutting. Commun Numer Methods Eng 9(12):975-987
    • (1993) Commun Numer Methods Eng , vol.9 , pp. 975-987
    • Rakotomalala, R.1    Joyot, P.2    Touratier, M.3
  • 18
    • 0032590867 scopus 로고    scopus 로고
    • An ALE formulation for the solution of two-dimensional metal cutting problems
    • 4-5
    • Olovsson L, Nilsson L Simonsson, K (1999) An ALE formulation for the solution of two-dimensional metal cutting problems. Comput Struct 72(4-5):497-507
    • (1999) Comput Struct , vol.72 , pp. 497-507
    • Olovsson, L.1    Nilsson, L.2    Simonsson, K.3
  • 19
    • 0033894763 scopus 로고    scopus 로고
    • FE modeling of chip formation in orthogonal metal cutting process: An ALE approach
    • Movahhedy MR, Gadala MS, Altintas Y (2000) FE modeling of chip formation in orthogonal metal cutting process: an ALE approach. Mach Sci Technol 4:15-47
    • (2000) Mach Sci Technol , vol.4 , pp. 15-47
    • Movahhedy, M.R.1    Gadala, M.S.2    Altintas, Y.3
  • 20
    • 0036588313 scopus 로고    scopus 로고
    • Numerical analysis of metal cutting with chamfered and blunt tools
    • 2
    • Movahhedy MR, Altintas Y, Gadala MS (2002) Numerical analysis of metal cutting with chamfered and blunt tools. ASME J Manuf Sci Eng 124(2):178-188
    • (2002) ASME J Manuf Sci Eng , vol.124 , pp. 178-188
    • Movahhedy, M.R.1    Altintas, Y.2    Gadala, M.S.3
  • 22
    • 32844467801 scopus 로고    scopus 로고
    • On friction modeling in orthogonal machining: An arbitrary Lagrangian-Eulerian finite element model
    • Haglund AJ, Kishawy HA, Rogers RJ On friction modeling in orthogonal machining: an arbitrary Lagrangian-Eulerian finite element model. Trans NAMRI/SME 33:589-596
    • Trans NAMRI/SME , vol.33 , pp. 589-596
    • Haglund, A.J.1    Kishawy, H.A.2    Rogers, R.J.3
  • 24
    • 0041691018 scopus 로고    scopus 로고
    • Modeling of hard part machining: Effect of insert edge preparation for CBN cutting tools
    • Özel T (2003) Modeling of hard part machining: effect of insert edge preparation for CBN cutting tools. J Mater Process Technol 141:284-293
    • (2003) J Mater Process Technol , vol.141 , pp. 284-293
    • Özel, T.1
  • 25
    • 0942288492 scopus 로고    scopus 로고
    • A finite element analysis of orthogonal machining using different toll edge geometries
    • 1
    • Yen Y-C, Jain A, Altan T (2004) A finite element analysis of orthogonal machining using different toll edge geometries. J Mater Process Technol 146(1):72-81
    • (2004) J Mater Process Technol , vol.146 , pp. 72-81
    • Yen, Y.-C.1    Jain, A.2    Altan, T.3
  • 26
    • 0038399893 scopus 로고    scopus 로고
    • Machining simulation of ductile iron and its constituents. Part 2: Numerical simulation and experimental validation of machining
    • 2
    • Chuzhoy L, DeVor RE, Kapoor SG (2003) Machining simulation of ductile iron and its constituents. Part 2: numerical simulation and experimental validation of machining. ASME J Manuf Sci Eng 125(2):192-201
    • (2003) ASME J Manuf Sci Eng , vol.125 , pp. 192-201
    • Chuzhoy, L.1    Devor, R.E.2    Kapoor, S.G.3
  • 27
    • 0036536768 scopus 로고    scopus 로고
    • A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element method
    • 4
    • Yang X, Liu CR (2002) A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element method. Int J Mech Sci 44(4):703-723
    • (2002) Int J Mech Sci , vol.44 , pp. 703-723
    • Yang, X.1    Liu, C.R.2
  • 28
    • 0033894531 scopus 로고    scopus 로고
    • Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer
    • 6
    • Liu CR, Guo YB (2000) Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer. Int J Mech Sci 42(6):1069-1086
    • (2000) Int J Mech Sci , vol.42 , pp. 1069-1086
    • Liu, C.R.1    Guo, Y.B.2
  • 29
    • 0036588441 scopus 로고    scopus 로고
    • 3D FEA modeling of hard turning
    • 2
    • Guo YB, Liu CR (2002) 3D FEA modeling of hard turning. ASME J Manuf Sci Eng 124(2):189-199
    • (2002) ASME J Manuf Sci Eng , vol.124 , pp. 189-199
    • Guo, Y.B.1    Liu, C.R.2
  • 30
    • 32844468262 scopus 로고    scopus 로고
    • A hybrid modeling approach to investigate chip morphology transition with the stagnation effect by cutting edge geometry
    • Guo YB, Wen Q (2005) A hybrid modeling approach to investigate chip morphology transition with the stagnation effect by cutting edge geometry. Trans NAMRI/SME 33:469-476
    • (2005) Trans NAMRI/SME , vol.33 , pp. 469-476
    • Guo, Y.B.1    Wen, Q.2
  • 31
    • 0041842547 scopus 로고    scopus 로고
    • On the measurement and prediction of temperature fields in machining of AISI 1045 steel
    • 1
    • Davies MA, Cao Q, Cooke AL, Ivester R (2003) On the measurement and prediction of temperature fields in machining of AISI 1045 steel. Annals CIRP 52(1):77-80
    • (2003) Annals CIRP , vol.52 , pp. 77-80
    • Davies, M.A.1    Cao, Q.2    Cooke, A.L.3    Ivester, R.4
  • 33
    • 0001875628 scopus 로고    scopus 로고
    • Machining-induced residual stress: Experimentation and modeling
    • 1
    • Jacobus K, DeVor RE, Kapoor SG (2000) Machining-induced residual stress: experimentation and modeling. ASME J Manuf Sci Eng 122(1):20-31
    • (2000) ASME J Manuf Sci Eng , vol.122 , pp. 20-31
    • Jacobus, K.1    Devor, R.E.2    Kapoor, S.G.3
  • 34
    • 0000495449 scopus 로고
    • A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures
    • The Hague, The Netherlands, April 1983
    • Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th International Symposium on Ballistics, The Hague, The Netherlands, April 1983, pp 541-547
    • (1983) Proceedings of the 7th International Symposium on Ballistics , pp. 541-547
    • Johnson, G.R.1    Cook, W.H.2
  • 36
    • 33645289397 scopus 로고    scopus 로고
    • A methodology to determine work material flow stress and tool-chip interfacial friction properties by using analysis of machining
    • 1
    • Özel T, Zeren E (2006) A methodology to determine work material flow stress and tool-chip interfacial friction properties by using analysis of machining. ASME J Manuf Sci Eng 128(1):119-129
    • (2006) ASME J Manuf Sci Eng , vol.128 , pp. 119-129
    • Özel, T.1    Zeren, E.2
  • 37
    • 33646002639 scopus 로고    scopus 로고
    • Finite element modeling of stresses induced by high speed machining with round edge cutting tools
    • Orlando, Florida, November 2005, paper no. 81046
    • Özel T, Zeren E (2005) Finite element modeling of stresses induced by high speed machining with round edge cutting tools. In: Proceedings of the 2005 International Mechanical Engineering Congress (IMECE 2005), Orlando, Florida, November 2005, paper no. 81046
    • (2005) Proceedings of the 2005 International Mechanical Engineering Congress (IMECE 2005)
    • Özel, T.1    Zeren, E.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.