Heat transfer from freely suspended bimaterial microcantilevers

Journal of Heat Transfer

Volumn 133, Issue 4, 2011, Pages

  Narayanaswamy, Arvind ^a   Gu, Ning ^a  

^a Columbia University ^*  (United States)

Author keywords

atomic force microscope; heated microcantilever; photothermal heating; thermal conductance

Indexed keywords

A-THERMAL; ATOMIC FORCE MICROSCOPE CANTILEVERS; ATOMIC FORCE MICROSCOPES; BI-MATERIAL; BI-MATERIAL CANTILEVER; BIOLOGICAL SENSORS; COEFFICIENT OF THERMAL EXPANSION; ENERGY CHANGES; FORCE-DISTANCE CURVES; GOLD-COATED; HEAT TRANSFER RATE; HEATED MICROCANTILEVER; MICRO-CANTILEVERS; PHOTOTHERMAL HEATING; STATIC DEFLECTIONS; TEMPERATURE CHANGES; THERMAL CONDUCTANCE; THERMO-MECHANICAL; TWO-MATERIALS;

ATMOSPHERIC CHEMISTRY; ATMOSPHERIC PRESSURE; BIOSENSORS; CHEMICAL SENSORS; COMPOSITE MICROMECHANICS; GOLD COATINGS; HEATING; MICROSCOPES; NANOCANTILEVERS; ORGANIC POLYMERS; SILICON NITRIDE; THERMAL CONDUCTIVITY;

THERMAL EXPANSION;

EID: 78651281555     PISSN: 00221481     EISSN: 15288943     Source Type: Journal    
DOI: 10.1115/1.4001126     Document Type: Article

References (36)

1. Thundat, T., Wachter, E. A., Sharp, S. L., and Warmack, R. J., 1995, "Detection of Mercury Vapor Using Resonating Microcantilevers," Appl. Phys. Lett., 66, pp. 1695-1697.
2. Gimzewski, J. K., Gerber, C., Meyer, E., and Schlittler, R. R., 1994, "Observation of a Chemical Reaction Using a Micromechanical Sensor," Chem. Phys. Lett., 217, pp. 589-594.
3. Van Neste, C. W., Senesac, L. R., Yi, D., and Thundat, T., 2008, "Standoff Detection of Explosive Residues Using Photothermal Microcantilevers," Appl. Phys. Lett., 92(3), p. 134102.
4. Mukhopadhyay, R., Sumbayev, V., Lorentzen, M., Kjems, J., Andreasen, P., and Besenbacher, F., 2005, "Cantilever Sensor for Nanomechanical Detection of Specific Protein Conformations," Nano Lett., 5(12), pp. 2385-2388.
5. Lai, J., Perazzo, T., Shi, Z., and Majumdar, A., 1997, "Optimization and Performance of High-Resolution Micro-Optomechanical Thermal Sensors," Sens. Actuators, A, 58, pp. 113-119.
6. Varesi, J., Lai, J., Perazzo, T., Shi, Z., and Majumdar, A., 1997, "Photothermal Measurements at Picowatt Resolution Using Uncooled Micro-Optomechanical Sensors," Appl. Phys. Lett., 71, pp. 306-308.
7. Narayanaswamy, A., Shen, S., and Chen, G., 2008, "Near-Field Radiative Heat Transfer Between a Sphere and a Substrate," Phys. Rev. B, 78, p. 115303.
8. Shen, S., Narayanaswamy, A., and Chen, G., 2009, "Surface Phonon Polaritons Mediated Energy Transfer Between Nanoscale Gaps," Nano Lett., 9, pp. 2909-2913.
9. Rousseau, E., Siria, A., Jourdan, G., Volz, S., Comin, F., Chevrier, J., and Greffet, J.-J., 2009, "Radiative Heat Transfer at the Nanoscale," Nat. Photonics, 3, pp. 514-517.
10. Binnig, G., Despont, M., Drechsler, U., Häberle, W., Lutwyche, M., Vettiger, P., Mamin, H. J., Chui, B. W., and Kenny, T. W., 1999, "Ultrahigh-Density Atomic Force Microscopy Data Storage With Erase Capability," Appl. Phys. Lett., 74, pp. 1329-1331.
11. Vettiger, P., Cross, G., Despont, M., Drechsler, U., Durig, U., Gotsmann, B., Haberle, W., Lantz, M., Rothuizen, H., Stutz, R., and Binnig, G., 2002, "The "Millipede"-Nanotechnology Entering Data Storage," IEEE Trans. Nanotechnol., 1(1), pp. 39-55.
12. Nelson, B. A., King, W. P., Laracuente, A. R., Sheehan, P. E., and Whitman, L. J., 2006, "Direct Deposition of Continuous Metal Nanostructures by Thermal Dip-Pen Nanolithography," Appl. Phys. Lett., 88(3), p. 033104.
13. Kim, S.-J., Ono, T., and Esashi, M., 2009, "Thermal Imaging With Tapping Mode Using a Bimetal Oscillator Formed at the End of a Cantilever," Rev. Sci. Instrum., 80(3), p. 033703.
14. Nelson, B. A., and King, W. P., 2007, "Measuring Material Softening With Nanoscale Spatial Resolution Using Heated Silicon Probes," Rev. Sci. Instrum., 78(2), p. 023702.
15. Zhou, Y. X., Jiang, F., Chen, H., Note, R., Mizuseki, H., and Kawazoe, Y., 2008, "First-Principles Study of Length Dependence of Conductance in Alkanedithiols," J. Chem. Phys., 128(4), p. 044704.
16. Pinnaduwage, L., Gehl, A., Hedden, D., Muralidharan, G., Thundat, T., Lareau, R., Sulchek, T., Manning, L., Rogers, B., Jones, M., and Adams, J., 2003, "A Microsensor for Trinitrotoluene Vapour," Nature, London, 425(6957), p. 474.
17. Ratcliff, G. C., Erie, D. A., and Superfine, R., 1998, "Photothermal Modulation for Oscillating Mode Atomic Force Microscopy in Solution," Appl. Phys. Lett., 72, pp. 1911-1913.
18. Eastman, T., and Zhu, D., 1995, "Influence of an AFM Tip on Interfacial Melting on Ice," J. Colloid Interface Sci., 172, pp. 297-301.
19. Lee, S.-M., and Cahill, D. G., 1997, "Heat Transport in Thin Dielectric Films," J. Appl. Phys., 81, pp. 2590-2595.
20. Zink, B. L., and Hellman, F., 2004, "Specific Heat and Thermal Conductivity of Low-Stress Amorphous Si-N Membranes," Solid State Commun., 129, pp. 199-204.
21. Zink, B. L., Revaz, B., Cherry, J. J., and Hellman, F., 2005, "Measurement of Thermal Conductivity of Thin Films With a Si-N Membrane-Based Microcalorimeter," Rev. Sci. Instrum., 76, p. 024901.
22. Sultan, R., Avery, A. D., Stiehl, G., and Zink, B. L., 2009, "Thermal Conductivity of Micromachined Low-Stress Silicon-Nitride Beams From 77 to 325 K," J. Appl. Phys., 105(4), p. 043501.
23. Shi, L., and Majumdar, A., 2002, "Thermal Transport Mechanisms at Nanoscale Point Contacts," ASME J. Heat Transfer, 124, pp. 329-337.
24. Park, K., Cross, G. L. W., Zhang, Z. M., and King, W. P., 2008, "Experimental Investigation on the Heat Transfer Between a Heated Microcantilever and a Substrate," ASME J. Heat Transfer, 130, p. 102401.
25. Thiery, L., Toullier, S., Teyssieux, D., and Briand, D., 2008, "Thermal Contact Calibration Between a Thermocouple Probe and a Microhotplate," ASME J. Heat Transfer, 130, p. 091601.
26. Lefèvre, S., Volz, S., and Chapuis, P.-O., 2006, "Nanoscale Heat Transfer at Contact Between a Hot Tip and a Substrate," Int. J. Heat Mass Transfer, 49, pp. 251-258.
27. Chapuis, P.-O., Greffet, J.-J., Joulain, K., and Volz, S., 2006, "Heat Transfer Between a Nano-Tip and a Surface," Nanotechnology, 17(12), pp. 2978- 2981.
28. Lee, J., and King, W. P., 2007, "Microcantilever Hotplates: Design, Fabrication, and Characterization," Sens. Actuators, A, 136(1), pp. 291-298.
29. Shen, S., Narayanaswamy, A., Goh, S., and Chen, G., 2008, "Thermal Conductance of AFM Bi-Material Cantilevers," Appl. Phys. Lett., 92, p. 063509.
30. Young, W. C., 1989, Roark's Formulas for Stress and Strain, McGraw-Hill, New York.
31. Kim, K. J., and King, W. P., 2009, "Thermal Conduction Between a Heated Microcantilever and a Surrounding Air Environment," Appl. Therm. Eng., 29, pp. 1631-1641.
32. Lee, J., Wright, T. L., Abel, M. R., Sunden, E. O., Marchenkov, A., Graham, S., and King, W. P., 2007, "Thermal Conduction From Microcantilever Heaters in Partial Vacuum," J. Appl. Phys., 101(1), p. 014906.
33. Park, K., Lee, J., Zhang, Z., and King, W., 2007, "Frequency- Dependent Electrical and Thermal Response of Heated Atomic Force Microscope Cantilevers," J. Microelectromech. Syst., 16 (2), pp. 213-222. (Pubitemid 46564197)
34. Hu, X. J., Jain, A., and Goodson, K. E., 2008, "Investigation of the Natural Convection Boundary Condition in Microfabricated Structures," Int. J. Therm. Sci., 47(7), pp. 820-824.
35. Yovanovich, M. M., 1998, Handbook of Heat Transfer, McGraw-Hill, New York, Chap. 3.
36. Yovanovich, M. M., and Marotta, E. E., 2003, Heat Transfer Handbook,Wiley, New York, Chap. 4.