Parallel kinematics for machine tools

Machine Tools for High Performance Machining

Volumn , Issue , 2009, Pages 335-368

  Altuzarra, Oscar ^a   Hernández, Alfonso ^a   San Martín, Yon ^b   Larrañaga, Josu ^b  

^a UNIVERSITY OF THE BASQUE COUNTRY UPV EHU   (Spain)

^b TECNALIA RESEARCH AND INNOVATION   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77953142925     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-84800-380-4_10     Document Type: Chapter

References (53)

1. An CH, Atkeson CG, Hollerbach JM (1986) Experimental determination of the effect of feedforward control on trajectory tracking errors. Proc of IEEE Int Conf on Robotics and Automation, 55-60
2. Andreff N, Renaud P, Pierrot F, Martinet P (2004) Vision-Based Kinematic Calibration of an H4 Parallel Mechanism: Practical Accuracies. Industrial Robot Int J, 31(3):273-283
3. Ball RS (1900) A treatise on the theory of screws. Cambridge University Press, Cambridge
4. Bianchi G, Fassi I, Molinari Tosatti LA (2001) Virtual Prototyping Environment for Parallel Kinematic Machine Analysis and Design 32nd Int Symposium on Robotics, Korea
5. Chanal H, Duc E, Ray P, Hascoët J-Y (2007) A new approach for the geometrical calibration of parallel kinematics machines tools based on the machining of a dedicated part. Int J of Mach Tool aManufact, 47(7-8):1151-1163
6. Chanal H, Duc E, Ray P, Hascoët J-Y (2006) Design of a dedicated machined part for calibrating a parallel kinematics machine tool, 5 congrès Int Usinage à Grande Vitesse, Metz, 317-328
7. Clavel R (1991) Conception d'un robot parallèle rapide à 4 degrés de liberté. PhD Thesis, EPFL, Lausanne, Switzerland
8. Codourey A (1998) Dynamic modeling of parallel robots for computed-torque control implementation. Int J of Robotics Research, 17(12):1325-1336
9. Collado V, Herranz S (2004) Space 5H - A New Machine Concept for 5-Axis Milling of Aeronautical Structural Components. PKS 2004 Conf Proc
10. Daeyoung Machinery Eclipse-RP. US Patent No. 6, 135, 683
11. Daney D, Papegay Y, Madeline B (2005) Choosing Measurement Poses for Robot Calibration with the Local Convergence Method and Tabu. Int J of Robotics Research. 24(6):501-518
12. Driels MR, Pathre US (1990) Significance of observation strategy on the design of robot calibration experiments. J of Robotic Systems, 7(2):197-223
13. Giddings & Lewis Variax. US Patent No. 5, 388, 935
14. Gosselin CM, Angeles J (1990) Singularity analysis of closed loop kinematic chains. IEEE Trans on Robotics and Automation. 6(3):281-290
15. Gosselin CM, Kong X (2004) Cartesian Paralle manipulators. Patent US 6729202
16. Gosselin CM, Pierre ES, Gagné M (1996) On the Development of the Agile Eye. IEEE Robotics and Automation Magazine
17. Gough V, Whitehall S (1962) Universal tyre test machine. Proc of the FISITA ninth Int technical congress. 117-137
18. Hennes N, Staimer D (2004) Application of PKM in Aerospace Manufacturing - High Performance Machining Centers ECOSPEED, ECOSPEED-F and ECOLINER. PKS 2004 Conference Proceedings.
19. Hermes Patent EP1 245 349
20. Hervé J M (1999) The Lie Group of Rigid Body Displacements, a Fundamental Tool for Mechanism Design. Mechanism and Machine Theory. 34(5):719-730
21. Hesselbach J, Kerle H, Frindt M, Pietsch (2001) I PORTYS - A machine concept with parallel structure for precise pick and place operations at high-speed. In: Proc of RAAD Int Workshop on Robotics in Alpe-Adria-Danube Region
22. Hesselbach J, Becker O, Krefft M, Pietsch I, Plitea N (2002) Dynamic modelling of plane parallel robots for control purposes. In: Proc. of the Chemnitz Parallel Kinematics Seminar (PKS): 391-409
23. Honegger M, Brega R, Schweiter G (2000) Application of a nonlinear adaptive controller to a 6 DOF parallel manipulator. In Robotics and Automation, Proc. ICRA'00. IEEE Int Conference 2:1930-1935
24. http://www.ds-technologie.de
25. Ingersoll Octahedral Hexapod HOH-600. US Patent No. 5, 392, 663
26. Kim DH, Kang JY, Lee KI (2000) Robust tracking control design for a 6 DOF parallel manipulator. J of Robotic Systems, 17:527-547
27. Kong X, Gosselin CM (2007) Type synthesis of parallel mechanisms. Springer, Dordrecht
28. Loreto H, Garrido R (2005) Stable neural PD controller for redundantly actuated parallel manipulators with uncertain kinematics. In: Decision and Control, 2005 and 2005 European Control Conf CDC-ECC'05. 2035-2040
29. Li CG, Ding HS, Wu PD (2003) Application of mrac to a 6-DOF parallel machine tool. In: Machine Learning and Cybernetics, 2003 Int Conf, 4:2164-2167
30. Maurine P, Abe K, Uchiyama M (1999) Toward more accurate parallel robots. In: 15th World Congress of Int. Measurement Confederation, Osaka
31. Meggiolaro MA, Dubowsky S (2000) An Analytical Method to Eliminate the Redundant Parameters in Robot Calibration. Proceedings of the 2000 IEEE Int Conference on Robotics and Automation, 3609-3615
32. Menq CH, Borm JH, Lai JZ (1989) Identification and observability measure of a basis set of error parameters in robot calibration. J of Mechanisms, Transmissions and Automation in Design, 11:513-518
33. Merlet JP (2006) Parallel Robots. Springer, Dordrecht
34. Mikromat 6X. WO9943463A1: Hexapod Machining Centre
35. Nahvi A, Hollerbach JM, Hayward V (1994) Calibration of a parallel robot using multiple kinematic closed loops. Proc IEEE Int Conf Robotics and Automation, 407-412
36. Nahvi A, Hollerbach JM (1996) The noise amplification index for optimal pose selection in robot calibration. In: IEEE Int Conf on Robotics and Automation, 647-654
37. Neumann KE (1988) Robot. US Patent No. 4732525
38. Okuma Cosmo Center PM-600. US Patent No. 6, 203, 254
39. Ota H, Shibukawa T, Tooyama T, Uchiyama M (2002) Forward Kinematic Calibration Method for Parallel Mechanism Using Pose Data Measured by a Double Ball Bar System. In: 1st Korea Japan Conf Positioning Technol 2002, 113-118
40. Pierrot F, Company O et al. (2001) Four degrees of freedom parallel robot. Patent EP 1084802
41. Pierrot F, Marquet F, Company O, Gil T (2001) H4 parallel robot: Modeling, design and preliminary experiments, ICRA'01: Int Conf on Robotics and Automation, 3256-3261
42. Pritschow G, Eppler C, Garber T (2002) Influence of the dynamic stiffness on the accuracy of PKM. In: Proc of The 3rd Chemnitz Parallel Kinematics Seminar, PKS 2002, 313-333
43. Salgado O, Altuzarra O et al. (2007) Robot paralelo con cuatro grados de libertad. Spanish Patent P200702793
44. San Martin Y, Gimenez M, Rauch M, Hascoët J-Y (2006) Verne - a new 5 axes hybrid architecture machining centre. In: Proc of the 5th Chemnitz Parallel Kinematics Seminar, PKS 2006
45. Schoppe E, Pönish A, Maier V, Puchtler T, Ihlenfeldt S (2002) Tripod Machine SKM 400 Design, Calibration and Practical Application. In: Proc of the 3rdh Chemnitz Parallel Kinematics Seminar, PKS 2002, 579-594
46. Schroer K (1993) Theory of kinematic modelling and numerical procedures for robot calibration. Chapman & Hall, London
47. Schwaar M, Jaehnert T, Ihlenfeldt S (2002) Mechatronic Design, Experimental Property Analysis and Machining Strategies for a 5-Strut-PKM. PKS 2002 Conference Proceedings
48. Selig JM (2005) Geometric Fundamentals of Robotics. Springer, Dordrecht
49. Stewart D (1965) A platform with six degrees of freedom. Proc of the IMechE, 180(1):371-385
50. Tsai L, Joshi S (2000) Kinematics and optimization of a spatial 3UPU parallel manipulator. ASME J of Mechanical Design, 122(4):439-446
51. Vivas A, Poignet P (2005) Predictive functional control of a parallel robot machine. Control Eng Practice, 13(7):863-874
52. Zhuang H, Liu L (1996) Self-calibration of a class of parallel manipulators. Proceedings of The IEEE Int Conf on Robotics and Automation, 2(2):994-999
53. Zlatanov D et al. (1998) Identification and classification of the singular configurations of mechanisms. Mechanism and Machine Theory, 33(6):743-760.