Survey on iterative learning control, repetitive control, and run-to-run control

Journal of Process Control

Volumn 19, Issue 10, 2009, Pages 1589-1600

  Wang, Youqing ^a,b   Gao, Furong ^c   Doyle III, Francis J ^a,b  

^a University of California   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

^c HONG KONG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Hong Kong)

Author keywords

Batch process; Iterative learning control; Repetitive control; Repetitive process; Run based process; Run to run control

Indexed keywords

BATCH PROCESS; ITERATIVE LEARNING CONTROL; REPETITIVE CONTROL; REPETITIVE PROCESS; RUN-TO-RUN CONTROL;

BATCH DATA PROCESSING; DC MOTORS; EDUCATION; LEARNING ALGORITHMS; LEARNING SYSTEMS; MATHEMATICAL TRANSFORMATIONS; TWO TERM CONTROL SYSTEMS;

PROCESS CONTROL;

EID: 71849101609     PISSN: 09591524     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jprocont.2009.09.006     Document Type: Review

References (80)

1. Longman R.W. Iterative learning control and repetitive control for engineering practice. Int. J. Control 73 (2000) 930-954
2. Rzepniewski A.K., and Hardt D.E. Development of general multivariable run-by-run control methods with application to a sheet metal forming process. Int. J. Mach. Tools Manuf. 48 (2008) 599-608
3. Lee J.H., and Lee K.S. Iterative learning control applied to batch processes: an overview. Control Eng. Pract. 15 (2007) 1306-1318
4. Ahn H.-S., Chen Y., and Moore K.L. Iterative learning control: brief survey and categorization. IEEE Trans. Syst. Man Cybern. Part C: Appl. Rev. 37 (2007) 1099-1121
5. C. Li, D. Zhang, X. Zhuang, A survey of repetitive control, in: Proceedings of 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems, Sendai, Japan, 2004, pp. 1160-1166.
6. Castillo E.D. Run-to-run process control: literature review and extensions. J. Qual. Technol. 29 (1997) 184-196
7. Uchiyama M. Formulation of high-speed motion pattern of a mechanical arm by trial (in Japanese). Trans. SICE (Soc. Instrum. Control Eng.) 14 (1978) 706-712
8. S. Arimoto, S. Kawamura, F. Miyazaki, Bettering operation of dynamic systems by learning: a new control theory for servomechanism or mechatronic system, in: Proceedings of 23rd Conference on Decision and Control, Las Vegas, Nevada, 1984, pp. 1064-1069.
9. Shi J., Gao F., and Wu T.-J. Integrated design and structure analysis of robust iterative learning control system based on a two-dimensional model. Ind. Eng. Chem. Res. 44 (2005) 8095-8105
10. Freeman C.T., Lewin P.L., and Rogers E. Experimental evaluation of iterative learning control algorithms for non-minimum phase plants. Int. J. Control 8 (2005) 826-846
11. Wu J.H., and Ding H. Reference adjustment for a high-acceleration and high-precision platform via A-type of iterative learning control. Proc. IMechE, Part I: J. Syst. Control Eng. 221 (2007) 781-789
12. T. Inoue, S. Iwai, M. Nakano, High accuracy control of a proton synchrotron magnet power supply, in: Proc. 8th IFAC World Congress, 1981, Part 2, pp. 3137-3142.
13. T. Inoue, M. Nakano, S. Iwai, High accuracy control of servomechanism for repeated contouring, in: Proceedings of the 10th Annual Symposium on Incremental Motion Control Systems and Devices, 1981, pp. 258-292.
14. Francis B.A., and Wonham W.M. Internal model principle for linear-multivariable regulators. Appl. Math. Optim. 2 (1975) 170-194
15. E. Sachs, R.-S. Guo, S. Ha, A. Hu, On-line process optimization and control using the sequential design of experiments, in: 1990 Symposium on VLSI Technology, Honolulu, HI, 1990, pp. 99-100.
16. Sachs E., Guo R.-S., Ha S., and Hu A. Process control system for VLSI fabrication. IEEE Trans. Semicond. Manuf. 4 (1991) 134-144
17. Moyne J., del Castillo E., and Hurwitz A.M. Run-to-run Control in Semiconductor Manufacturing (2001), CRC Press LLC
18. Owens C., Zisser H., Jovanovič L., Srinivasan B., Bonvin D., and Doyle F.J. Run-to-run control of blood glucose concentrations for people with type 1 diabetes mellitus. IEEE Trans. Biomed. Eng. 53 (2006) 996-1005
19. Hakvoort W.B.J., Aarts R.G.K.M., van Dijk J., and Jonker J.B. Lifted system iterative learning control applied to an industrial robot. Control Eng. Pract. 16 (2008) 377-391
20. Kuc T.-Y., Lee J.S., and Nam K. An iterative learning control theory for a class of nonlinear dynamic systems. Automatica 28 (1992) 1215-1221
21. Yao W.-S., and Tsai M.-C. Analysis and estimation of tracking errors of plug-in type repetitive control systems. IEEE Trans. Automat. Control 50 (2005) 1190-1195
22. Owens D.H., and Feng K. Parameter optimization in iterative learning control. Int. J. Control 76 (2003) 1059-1069
23. L.G. Sison, E.K.P. Chong, No-reset iterative learning control, in: Proceedings of the 35th Conference on Decision and Control, Kobe, Japan, 1996, pp. 3062-3063.
24. Gupta M., and Lee J.H. Period-robust repetitive model predictive control. J. Process Control 16 (2006) 545-555
25. Wang Y.Q., Shi J., Zhou D.H., and Gao F.R. Iterative learning fault-tolerant control for batch processes. Ind. Eng. Chem. Res. 45 (2006) 9050-9060
26. Kaczorek T. Two-dimensional Linear System (1985), Springer, Berlin
27. Shi J., Gao F., and Wu T.-J. Robust iterative learning control design for batch processes with uncertain perturbations and initialization. AIChE J. 52 (2006) 2171-2187
28. Oh S.-R., Bien Z., and Suh I.H. An iterative learning control method with application for the robot manipulator. IEEE J. Robot. Automat. 4 (1988) 508-514
29. Owens D.H., and Hätönen J. Iterative learning control - an optimization paradigm. Annu. Rev. Control 29 (2005) 57-70
30. Chang W.S., Suh I.H., and Kim T.W. Analysis and design of two types of digital repetitive control systems. Automatica 31 (1995) 741-746
31. Saab S.S. Stochastic P-type/D-type iterative learning control algorithms. Int. J. Control 76 (2003) 139-148
32. Lee T.H., Tan K.K., Lim S.Y., and Dou H.F. Iterative learning control of permanent magnet linear motor with relay automatic tuning. Mechatronics 10 (2000) 169-190
33. Lee J.H., Lee K.S., and Kim W.C. Model-based iterative learning control with a quadratic criterion for time-varying linear systems. Automatica 36 (2000) 641-657
34. Lee K.S., Lee J.H., Chin I.S., and Lee H.J. A model predictive control technique for batch processes and its application to temperature tracking control of an experimental batch reactor. AIChE J. 45 (1999) 2175-2187
35. Wang Y.Q., Zhou D.H., and Gao F.R. Iterative learning model predictive control for multi-phase batch processes. J. Process Control 18 (2008) 543-557
36. Lee K.S., and Lee J.H. Iterative learning control-based batch process control technique for integrated control of end product properties and transient profiles of process variables. J. Process Control 13 (2003) 607-621
37. Lee K.S., and Lee J.H. Convergence of constrained model-based predictive control for batch processes. IEEE Trans. Automat. Control 45 (2000) 1928-1932
38. F. Xia, Y. Sun, NN-based iterative learning control under resource constraints: a feedback scheduling approach, ISNN 2005, LNCS 3498, 2005, pp. 1-6.
39. Park H.J., and Cho H.S. A fuzzy rule-based iterative learning control method with application to hydroforming processes. Mechatronics 2 (1992) 577-593
40. Wang Y.Q., Zhou D.H., and Gao F.R. Iterative learning reliable control of batch processes with sensor faults. Chem. Eng. Sci. 63 (2008) 1039-1051
41. Gunnarsson S., Norrlöf M., Rahic E., and Özbek M. On the use of accelerometers in iterative learning control of a flexible robot arm. Int. J. Control 80 (2007) 363-373
42. Tayebi A., and Xu J.-X. Observer-based iterative learning control for a class of time-varying nonlinear systems. IEEE Trans. Circuits Syst. I: Fundam. Theory Appl. 50 (2003) 452-455
43. Saab S.S. A stochastic iterative learning control algorithm with application to an induction motor. Int. J. Control 20 (2004) 144-163
44. Arif M., Ishihara T., and Inooka H. Prediction-based iterative learning control (PILC) for uncertain dynamic nonlinear systems using system identification technique. J. Intell. Robot. Syst. 27 (2000) 291-304
45. Khalil H.K. Nonlinear System. third ed. (2002), Prentice-Hall, New Jersey
46. Tzou Y.-Y., Jung S.-L., and Yeh H.-C. Adaptive repetitive control of PWM inverters for very low THD AC-voltage regulation with unknown loads. IEEE Trans. Power Electron. 14 (1999) 973-981
47. Desoer C.A., and Vidyasagar M. Feedback Systems: Input-Output Properties (1975), Academic Press, New York
48. Hara S., Yamamoto Y., Omata T., and Nakano M. Repetitive control system: a new type servo system for periodic exogenous signals. IEEE Trans. Automat. Control 33 (1988) 659-668
49. Li J., and Tsao T.-C. Robust performance repetitive control systems. J. Dynam. Syst. Meas. Control 123 (2001) 330-337
50. Wang J., He Q.P., Qin S.J., Bode C.A., and Purdy M.A. Recursive least squares estimation for run-to-run control with metrology delay and its application to STI etch process. IEEE Trans. Semicond. Manuf. 18 (2005) 309-319
51. Zhang C., Deng H., and Baras J.S. Run-to-run control methods based on the DHOBE algorithm. Automatica 39 (2003) 35-45
52. Palerm C.C., Jovanovic L., Zisser H., Doyle III F.J., and Bevier W.C. Prandial insulin dosing using run-to-run control. Diabetes Care 30 (2007) 1131-1136
53. G. Francois, B. Srinivasan, D. Bonvin, Convergence analysis of run-to-run control for a class of nonlinear systems, in: Proceedings of the American Control Conference, Denver, Colorado, 2003, pp. 3032-3037.
54. K.J. Mclaughlin, Developing of techniques for real time monitoring and control in plasma etching, Ph.D. dissertation, University of Texas at Austin, 1989.
55. Tayebi A., and Chien C.-J. A unified adaptive iterative learning control framework for uncertain nonlinear systems. IEEE Trans. Automat. Control 52 (2007) 1907-1913
56. Chien C.-J., and Tayebi A. Further results on adaptive iterative learning control of robot manipulators. Automatica 44 (2008) 830-837
57. Bone G.M. A novel iterative learning control formulation of generalized predictive control. Automatica 31 (1995) 1483-1487
58. Jiang P., Bamforth L.C.A., Feng Z., Baruch J.E.F., and Chen Y.Q. Indirect iterative learning control for a discrete visual servo without a camera-robot model. IEEE Trans. Syst. Man Cybern. Part B: Cybern. 37 (2007) 863-876
59. Tan K.K., Zhao S., and Xu J.-X. Online automatic tuning of a proportional integral derivative controller based on an iterative learning control approach. IET Control Theory Appl. 1 (2007) 90-96
60. Tzou Y.-Y., Ou R.-S., Jung S.-L., and Chang M.-Y. High-performance programmable AC power source with low harmonic distortion using DSP-based repetitive control technique. IEEE Trans. Power Electron. 12 (1997) 715-725
61. Chen C.-L., and Chiu G.T.C. Spatially periodic disturbance rejection with spatially sampled robust repetitive control. J. Dyn. Syst. Meas. Control 130 (2008) 1-11
62. 6 at low pressures. J. Vac. Sci. Technol. B 19 (2001) 1931-1941
63. Ganesan R., Das T.K., and Ramachandran K.M. A multiresolution analysis - assisted reinforcement learning approach to run-by-run control. IEEE Trans. Automat. Sci. Eng. 4 (2007) 182-193
64. Hankinson M., Vincent T., Irani K.B., and Khargonekar P.P. Integrated real-time and run-to-run control of etch depth in reactive ion etching. IEEE Trans. Semicond. Manuf. 10 (1997) 121-130
65. Busch J., Cruse A., and Marquardt W. Run-to-run control of membrane filtration processes. AIChE J. 53 (2007) 2316-2328
66. Sugie T., and Sakai F. Noise tolerant iterative learning control for a class of continuous-time systems. Automatica 43 (2007) 1766-1771
67. Moore K.L. Iterative learning control - an expository overview. Appl. Comput. Control Signal Process. Circuits 1 (1999) 151-241
68. Ahn H.-S., Moore K.L., and Chen Y. Iterative Learning Control: Robustness and Monotonic Convergence for Interval Systems (2007), Springer-Verlag, London
69. Y. Wang, H. Zisser, E. Dassau, L. Jovanovič, F.J. Doyle III, Model predictive control with learning-type set-point: application to artificial pancreatic β-cell, AIChE J., in press.
70. Y. Wang, E. Dassau, F.J. Doyle III, Closed-loop control of artificial pancreatic β-cell in type 1 diabetes mellitus using model predictive iterative learning control, IEEE Trans. Biomed. Eng., in press, doi:10.1109/TBME.2009.2024409.
71. Palerm C.C., Zisser H., Jovanovič L., and Doyle III F.J. A run-to-run control strategy to adjust basal insulin infusion rates in type 1 diabetes. J. Process Control 18 (2008) 258-265
72. Dou H., Tan K.K., Lee T.H., and Zhou Z. Iterative learning feedback control of human limbs via functional electrical stimulation. Control Eng. Pract. 7 (1999) 315-325
73. Doyle F., Jovanovič L., Seborg D., Parker R.S., Bequette B.W., Jeffrey A.M., Xia X., Craig I.K., and McAvoy T. A tutorial on biomedical process control. J. Process Control 17 (2007) 571-594
74. Del Castillo E., and Yeh J.-Y. An adaptive run-to-run optimizing controller for linear and nonlinear semiconductor processes. IEEE Trans. Semicond. Manuf. 11 (1998) 285-295
75. Xu J.-X., and Qu Z. Robust iterative learning control for a class of nonlinear systems. Automatica 34 (1998) 983-988
76. Heertjes M., and Tso T. Nonlinear iterative learning control with applications to lithographic machinery. Control Eng. Pract. 15 (2007) 1545-1555
77. Choi J.Y., and Park H.J. Use of neural networks in iterative learning control systems. Int. J. Syst. Sci. 31 (2001) 1227-1239
78. Xu J.-X., and Viswanathan B. Adaptive robust iterative learning control with dead zone scheme. Automatica 36 (2000) 91-99
79. Driessen B.J., and Sadegh N. Convergence theory for multi-input discrete-time iterative learning control with Coulomb friction, continuous outputs, and input bounds. Int. J. Adapt. Control Signal Process 18 (2004) 457-471
80. Chen H.-F., and Fang H.-T. Output tracking for nonlinear stochastic systems by iterative learning control. IEEE Trans. Automat. Control 49 (2004) 583-588