High-Precision Hydraulic Pressure Control Based on Linear Pressure-Drop Modulation in Valve Critical Equilibrium State

IEEE Transactions on Industrial Electronics

Volumn 64, Issue 10, 2017, Pages 7984-7993

  Lv, Chen ^a   Wang, Hong ^b   Cao, Dongpu ^a  

^a CRANFIELD UNIVERSITY   (United Kingdom)

^b UNIVERSITY OF WATERLOO   (Canada)

Author keywords

Experimental validation; hardware in the loop (HiL) test; linear pressure drop modulation; sliding mode control (SMC); switching valve

Indexed keywords

DROPS; HARDWARE; HYDRAULIC BRAKES; HYDRAULIC FLUIDS; MODULATION; PRESSURE CONTROL; PRESSURE DROP; SYNTHETIC APERTURES;

AUTOMOTIVE BRAKING SYSTEMS; ENVIRONMENTAL TEMPERATURE; EXPERIMENTAL VALIDATIONS; HARDWARE IN THE LOOPS; HARDWARE-IN-THE-LOOP TESTS; HYDRAULIC BRAKE SYSTEMS; HYDRAULIC PRESSURE CONTROL; LINEAR PRESSURE;

SLIDING MODE CONTROL;

EID: 85029470619     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2017.2694414     Document Type: Article

References (34)

1. S. A. Ali, A. Christen, S. Begg, and N. Langlois, "Continuous-discrete time-observer design for state and disturbance estimation of electrohydraulic actuator systems, " IEEE Trans. Ind. Electron., vol. 63, no. 7, pp. 4314-4324, Jul. 2016.
2. L. Wu, P. Shi, and X. Su, Sliding Mode Control of Uncertain Parameter- Switching Hybrid Systems. Hoboken, NJ, USA: Wiley, 2014.
3. A. N. Abdel-Baqi and P. Miller, "Dynamic performance improvement and peak power limiting using ultracapacitor storage system for hydraulic mining shovels, " IEEE Trans. Ind. Electron., vol. 62, no. 5, pp. 3173-3181, May 2015.
4. Y. Lin, Y. Shi, and R. Burton, "Modeling and robust discrete-time sliding mode control design for a fluid power electrohydraulic actuator (EHA) system, " IEEE/ASME Trans. Mechatronics, vol. 18, no. 1, pp. 1-10, Feb. 2013.
5. F. Meng, H. Zhang, D. Cao, and H. Chen, "System modeling, coupling analysis, and experimental validation of a proportional pressure valve with pulsewidth modulation control, " IEEE/ASME Trans. Mechatron., vol. 21, no. 3, pp. 1742-1753, Jun. 2016.
6. C. Lv, J. Zhang, and Y. Li, "Extended-Kalman-filter-based regenerative and friction blended braking control for electric vehicle equippedwith axle motor considering damping and elastic properties of electric powertrain, " Veh. Syst. Dyn., vol. 52, pp. 1372-1388, 2014.
7. H. An, J. Liu, C. Wang, and L. Wu, "Disturbance observer-based antiwindup control for air-breathing hypersonic vehicles, " IEEE Trans. Ind. Electron., vol. 63, no. 5, pp. 3038-3049, May 2016.
8. J. J. Castillo, J. A. Cabrera, A. J. Guerra, and A. Simón, "A novel electrohydraulic brake system with tire-road friction estimation and continuous brake pressure control, " IEEE Trans. Ind. Electron., vol. 63, no. 3, pp. 1863-1875, Mar. 2016.
9. X. Liu, Y. Shi, and D. Constantinescu, "Robust distributed model predictive control of constrained continuous-time nonlinear systems using two-layer invariant sets, " J. Dyn. Syst., Meas., Control, vol. 138, 2016, Art. no. 061004.
10. J. Ko, S. Ko, H. Son, B. Yoo, J. Cheon, and H. Kim, "Development of brake system and regenerative braking cooperative control algorithm for automatic-transmission-based hybrid electric vehicles, " IEEE Trans. Veh. Technol., vol. 64, no. 2, pp. 431-440, Feb. 2015.
11. X. Huang and J. Wang, "Model predictive regenerative braking control for lightweight electric vehicles with in-wheel motors, " Proc. Inst. Mech. Eng., J. Automob. Eng., vol. 226, pp. 1220-1232, 2012.
12. J. N. Bae, Y. E. Kim, Y. W. Son, H. S. Moon, C. H. Yoo, and J. Lee, "Self-excited induction generator as an auxiliary brake for heavy vehicles and its analog controller, " IEEE Trans. Ind. Electron., vol. 62, no. 5, pp. 3091-3100, May 2015.
13. B. K. Sarkar, J. Das, R. Saha, S. Mookherjee, and D. Sanyal, "Approaching servoclass tracking performance by a proportional valve-controlled system, " IEEE/ASME Trans. Mechatron., vol. 18, no. 4, pp. 1425-1430, Aug. 2013.
14. E. Prasetiawan, Z. Rong, and A. Alleyne, "Fundamental performance limitations for a class of electronic two-stage proportional flow valves, " in Proc. 2001 Amer. Control Conf., vol. 5, pp. 3955-3960.
15. T. Radpukdee and P. Jirawattana, "Uncertainty learning and compensation: An application to pressure tracking of an electro-hydraulic proportional relief valve, " Control Eng. Pract., vol. 17, pp. 291-301, 2009.
16. P. Mercorelli, "A motion sensorless control for intake valves in combustion engines, " IEEE Trans. Ind. Electron., vol. 64, no. 4, pp. 3402-3412, Apr. 2017.
17. X. Zhao, L. Li, J. Song, C. Li, and X. Gao, "Linear control of switching valve in vehicle hydraulic control unit based on sensorless solenoid position estimation, " IEEE Trans. Ind. Electron., vol. 63, no. 7, pp. 4073-4085, Jul. 2016.
18. C. Lv, J. Zhang, Y. Li, D. Sun, and Y. Yuan, "Hardware-in-the-loop simulation of pressure-difference-limiting modulation of the hydraulic brake for regenerative braking control of electric vehicles, " Proc. Inst. Mech. Eng., J. Automob. Eng., vol. 228, pp. 649-662, 2014.
19. K. Ahn and S. Yokota, "Intelligent switching control of pneumatic actuator using on/off solenoid valves, " Mechatronics, vol. 15, pp. 683-702, 2005.
20. E. Lisowski andG. Filo, "Automated heavy load lifting andmoving system using pneumatic cushions, " Autom. Construction, vol. 50, pp. 91-101, 2015.
21. L. Lu and B. Yao, "Energy-saving adaptive robust control of a hydraulic manipulator using five cartridge valves with an accumulator, " IEEE Trans. Ind. Electron., vol. 61, no. 12, pp. 7046-7054, Dec. 2014.
22. P. Eyabi and G. Washington, "Modeling and sensorless control of an electromagnetic valve actuator, " Mechatronics, vol. 16, pp. 159-175, 2006.
23. F. Meng, P. Shi, H. R. Karimi, and H. Zhang, "Optimal design of an electro-hydraulic valve for heavy-duty vehicle clutch actuator with certain constraints, " Mech. Syst. Signal Process., vol. 68-69, pp. 491-503, 2016.
24. J. Zhang et al., "Study on a linear relationship between limited pressure difference and coil current of on/off valve and its influential factors, " ISA Trans., vol. 53, pp. 150-161, 2014.
25. G. S. Lee, H. J. Sung, H. C. Kim, and H. W. Lee, "Flow force analysis of a variable force solenoid valve for automatic transmissions, " J. Fluids Eng., vol. 132, 2010, Art. no. 031103.
26. N. D. Manring and S. Zhang, "Pressure transient flow forces for hydraulic spool valves, " J. Dyn. Syst., Meas., Control, vol. 134, 2012, Art. no. 034501.
27. R. Rajamani, Vehicle Dynamics and Control. New York, NY, USA: Springer, 2011.
28. W. H. Hayt and B. A. John, Engineering Electromagnetics, vol. 7. New York, NY, USA: McGraw-Hill, 2001.
29. D. Swaroop, J. K. Hedrick, P. P. Yip, and J. C. Gerdes, "Dynamic surface control for a class of nonlinear systems, " IEEE Trans. Autom. Control, vol. 45, no. 10, pp. 1893-1899, Oct. 2000.
30. B. Song and J. K. Hedrick, Dynamic Surface Control of Uncertain Nonlinear Systems: An LMI Approach. New York, NY, USA: Springer, 2011.
31. H. Imine, A. Benallegue, T. Madani, and S. Srairi, "Rollover risk prediction of heavy vehicle using high-order sliding mode observer: Experimental results, " IEEE Trans. Veh. Technol., vol. 63, no. 6, pp. 2533-2543, Jul. 2014.
32. C. Lv, J. Zhang, Y. Li, and Y. Yuan, "Mode-switching-based active control of a powertrain system with non-linear backlash and flexibility for an electric vehicle during regenerative deceleration, " Proc. Inst. Mech. Eng., J. Automob. Eng., vol. 229, pp. 1429-1442, 2015.
33. A. Fazeli, M. Zeinali, and A. Khajepour, "Application of adaptive sliding mode control for regenerative braking torque control, " IEEE/ASME Trans. Mechatron., vol. 17, no. 4, pp. 745-755, Aug. 2012.
34. C. Lv, J. Zhang, Y. Li, and Y. Yuan, "Directional-stability-aware brake blending control synthesis for over-actuated electric vehicles during straight-line deceleration, " Mechatronics, vol. 38, pp. 121-131, 2016.