Influence of tribology on global energy consumption, costs and emissions

Friction

Volumn 5, Issue 3, 2017, Pages 263-284

  Holmberg, Kenneth ^a   Erdemir, Ali ^b  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^b ARGONNE NATIONAL LABORATORY   (United States)

Author keywords

emission reduction; energy saving; friction; wear

Indexed keywords

AUTOMOBILES; CARBON DIOXIDE; EMISSION CONTROL; ENERGY CONSERVATION; ENERGY DISSIPATION; ENERGY UTILIZATION; FRICTION; HOUSING; INDUSTRIAL ECONOMICS; MACHINERY; MANUFACTURE; TRIBOLOGY; WEAR OF MATERIALS;

CATASTROPHIC FAILURES; EMISSION REDUCTION; FRICTION REDUCTION; LUBRICATION TECHNOLOGY; RESIDENTIAL SECTORS; TOTAL ENERGY CONSUMPTION; TRIBOLOGICAL CONTACTS; WEAR RELATED FAILURES;

COST REDUCTION;

EID: 85029144747     PISSN: 22237690     EISSN: 22237704     Source Type: Journal    
DOI: 10.1007/s40544-017-0183-5     Document Type: Review

References (106)

1. Jost H P (ed.). Lubrication (Tribology)–A report on the present position and industry’s needs. Department of Education and Science, H. M. Stationary Office, London, UK, 1966.
2. th Meeting of the Mechanical Failures Prevention Group. Gaithersburg, USA, 1974.
3. Jost H P, Schoefield J. Energy saving through tribology: A techno-economic study. Proc Instn Mech Engrs 195: 151–173 (1981)
4. Jost P H. Tribology–Origin and future. Wear 136: 1–17 (1990)
5. JSPMI. State-of-art report on lubrication practice in Japan (in Japanese). Technical Research Institute, Japan Society for the Promotion of Machine Industry, Japan, Research Report, 1970.
6. Research Report T76-36 Tribologie (Code BMFT-FB-T76-36). Bundesministerium fur Forschung und Technologie (Federal Ministry for Research and Technology), West Germany, 1976.
7. ASME 1977. Strategy for energy conservation through tribology. ASME, New York, 1977
8. nd edition, ASME, New York, 1977
9. China 1986. An investigation on the application of tribology in China. A report by the Tribology Institution of the Chinese Mechanical Engineering Society, September 1986, Beijing, China.
10. th Assessment report of the intergovernmental panel on climate change, WMO, UNEP, 2014.
11. Wiedmann T O, Schandl H, Lenzen M, Moran D, Suh S, West J, Kanemoto K. The material footprint of nations. PNAS 112: 6271–6276 (2015)
12. Lee P M, Carpick R (eds). Tribological opportunities for enhancing America’s energy efficiency. A report to the Advanced Research Projects Agency-Energy (ARPA-E) at the U.S. Department of Energy, 14.2.2017.
13. IEA Energy Technology Persectives 2010. Scenarios & Strategies to 2050 IEA International Energy Agency, Paris, France 2010.
14. Cha S C, Erdemir A (eds). Coating Technology for Vehicle Applications. Springer Verlag, Heidelberg, 2015.
15. Holmberg K, Kivikytö-Reponen P, Härkisaari P, Valtonen K, Erdemir A. Global energy consumption due to friction and wear in the mining industry. Tribology International 115: 116–139 (2017)
16. Nosonovsky M, Bhushan B. Green Tribology-Biomimetics, Energy Conservation and Sustainability. Springer Verlag, Berlin, Germany, 2012.
17. Holmberg K, Andersson P, Erdemir A. Global energy consumption due to friction in passenger cars. Tribology International 47: 221–234 (2012)
18. Holmberg K, Siilasto R, Laitinen T, Andersson P, Jäsberg A. Global energy consumption due to friction in paper machines. Tribology International 62: 58–77 (2013)
19. Holmberg K, Andersson P, Nylund P O, Mäkelä K, Erdemir A. Global energy consumption due to friction in trucks and buses. Tribology International 78: 94–114 (2014)
20. IEA Key World Energy Statistics 2016. International Energy Agency, Paris, France, 2010.
21. WEC, Global Transport Scenarios 2050. World Energy Council, London, UK, 2011.
22. Komonen K. Maintenance key numbers–Results from 2002 year survey/Kunnossapidon tunnuslukuja-Vuotta 2002 koskevan kyselyn tuloksia (in Finnish), Finnish Maintenance Society, Helsinki, Finland, 2003.
23. 2 Emissions–Energy Indicators. International Energy Agency, Paris, France, 2007.
24. Erdemir A, Holmberg K. Energy consumption due to friction in motored vehicles and low-friction coatings to reduce it. In Coating Technology for Vehicle Applications. Cha S C, Erdemir A (eds). Springer Verlag, Heidelberg, 2015: 1–23.
25. Mode of transport.Wikipedia, https://en.wikipedia.org/wiki/Mode_of_transport, 16.5.2017
26. Rodrigue J P, Comotois C, Slack B. The Geography of Transport Systems. 3rd edition, Routledge, New York, USA, 2013.
27. 2-Moving Toward Sustainability. International Energy Agency, Paris, France, 2009.
28. RITA. Freight Transportation: Global Highlights. US Department of Transportation, Reseacrh and Innovative Technology Administration, RITA Bureau of Transport Statistics, Washington DC, USA, 2010.
29. Davis J R (Ed.). Surface engineering for corrosion and wear resistance. ASM International, USA, 2001.
30. EU Transport in figures–Statistical pocketbook 2015. European Union, Brussels, Belgium, 2015.
31. Davis S C, Diegel S W, Boundy R G. Transportation Energy Data Book. Edition 32, Oak Ridge National Laboratory, Oak Ridge, USA, 2013.
32. IEA World Energy Outlook 2015. International Energy Agency, Paris, France, 2015.
33. Barros Bouchet M, Martin J M. The future of boundary lubrication by carbon coatings and environmentally friendly additives. In Advanced Tribology. Luo J, Meng Y, Shao T, Zhao Q (eds). Bejing, China, Tsinghua University Press & Springer, 2010: 598–599.
34. Martin J M, Barros Bouchet M I, Sagawa T. Green tribology: Lubricant compliant superhard DLC coatings. In Proceedings of the 4th World Tribology Conference, Kyoto Japan, 2009.
35. Martin J M, Barros Bouchet M I, Matta C, Zhang Q, Goddard III W A, Okuda S, Sagawa T. Gas-phase lubrication of a ta-C by glycerol and hydrogen peroxide: Experimental and computer modelling. Journal of Physical Chemistry C114: 5003–5011 (2010)
36. Martin J M, Ohmae N. Nanolubricants. John Wiley & Sons Ltd., New York, USA, 2008.
37. 2 nanotubes as potential oil additives. Wear 280–281: 36–45 (2012)
38. Kalin M, Kogovsek J, Remskar M. Nanoparticles as novel lubricating additives in a green, physically based lubrication technology for DLC coatings. Wear 303: 480–485 (2013)
39. Xu J, Li J. New achievements in superlubricity from International Workshop on Superlubricity: Fundamental and Applications. Friction 3(4): 344–351 (2015)
40. Dai W, Kheireddin B, Gao H, Liang H. Roles of nanoparticles in oil lubrication. Tribology International 102: 88–98 (2016)
41. Erdemir A, Ramirez G, Eryilmaz O L, Narayanan B, Liao Y, Karmath G, Sankaranarayanan S K. Carbon-based tribofilms from lubricating oils. Nature 536(7614): 67–71 (2016)
42. Scherge M, Böttcher R, Linsler D, Kurten D. Multi-phase friction and wear reduction by copper nanoparticles. Lubricants 4(36): 1–13 (2016)
43. Ge X, Xia Y, Shu Z, Zhao X. Conductive grease synthesized using nanometer ATO as an additive. Friction 3(1): 56–64 (2015)
44. Tormos B, Ramirez L, Johansson J, Björling M, Larsson R. Fuel consumption and friction benefits of low viscosity engine oils for heavy duty applications. Tribology International 110: 23–34 (2017)
45. Singh S, Singh S, Sehgal A. Impact of low viscosity engine oil on performance, fuel economy and emissions of light duty diesel engine. No. 2016-01-2316. SAE Technical Paper, 2016
46. Cuthbert J, Gangopadhyay A, Elie L, Liu Z, Mcwatt D, Hock E D, Erdemir A. Engine friction and wear performances with polyalkylene glycol engine oils. SAE Technical Paper 2016-01-2271
47. Choo J H, Forrest A K, Spikes H A. Influence of organic friction modifier on liquid slip: A new mechanism of organic friction modifier action. Tribology Letters 27: 239–244 (2007)
48. Amann T, Kailer A. Ultralow friction of mesogenic fluid mixtures in tribological reciprocating systems. Tribology Letters 37: 343–352 (2010)
49. Qu J, Truhan J J, Dai S, Luo H, Blau P J. Ionic liquids with ammonium cations as lubricants or additives. Tribology Letters 22: 207–214 (2006)
50. Qu J, Blau P, Dai S, Luo H, Meyer III H M. Ionic liquids as novel lubricants and additives for diesel engine applications. Tribology Letters 35: 181–189 (2009)
51. Qu J, Blau P, Dai S, Luo H, Meyer III H M, Truhan J J. Tribological characteristics of aluminium alloys sliding against steel lubricated by ammonium and imidazolium liquids. Wear 267: 1226–1231 (2009)
52. Zhou Y, Qu J. Ionic liquids as lubricant additives: A review. ACS Applied Materials & Interfaces 9(4): 3209–3222 (2017)
53. Li J, Zhang C, Ma L, Liu Y, Luo J. Superlubricity achieved with mixtures of acids and glycerol. Langmuir 29: 271–275 (2013)
54. Luo J, Deng M, Zhang C. Advances of Superlubricity. In Proc. ITS-IFToMM 2017 and K-TIS 2017, Jeju, Korea, 2017.
55. Zhang Y. An improved hydrodynamic journal bearing with the boundary slippage. Meccanica 50: 25–38 (2015)
56. Forster N H. Rolling contact testing of vapour phase lubricants–Part III: Surface analysis. Tribology Transactions 42(1): 1–9 (1999)
57. Argibay N, Keith J H, Krick B A, Hahn D W, Bourne G R, Sawer W G. High-temperature vapour phase lubrication using carbonaceous gases. Tribology Letters 40: 3–9 (2010)
58. Greiner C, Felts J R, Dai Z, King W P, Carpick R W. Controlling nanoscale friction through the competition between capillary adsorption and thermal activated sliding. AVS Nano 6(5): 4305–4313 (2012)
59. Berman D, Krim J. Surface science, MEMS and NEMS: Progress and opportunities for surface science research performed on, or by, microdevices. Progress in Surface Science 88: 171–211 (2013)
60. Kim H J, Seo K J, Kang K H, Kim D E. Nano-lubrication: A review. International Journal of Precision Engineering and Manufacturing 17(6): 829–841 (2016)
61. Hsu S M, Shen M. Wear prediction of ceramics. Wear 256: 867–878 (2004)
62. Tsai M H, Yeh J W. High-entropy alloys: A critical review. Materials Research Letters 2(3): 107–123 (2014)
63. Buluc G, Florea I, Chelariu R, Rusu O, Carcea I. Microstructure and wear resistance of FeNiCrMnCu high entropy alloy. Trans Tech Publications 1143: 3–6 (2017)
64. Yu Y, Wang J, Li J, Yang J, Kou H, Liu W. Tribological behavior of AlCoCrFeNi (Ti 0.5) high entropy alloys under oil and MACs lubrication. Journal of Materials Science & Technology 32(5): 470–476 (2016)
65. Nilufar S. Experimental investigation of structure, composition and properties of novel metal-carbon covetic materials. PhD dissertation, University of Illinois at Urbana-Champaign, USA, 2014.
66. Della Corte C. Novel Super-Elastic Materials for Advanced Bearing Applications. In: Advances in Science and Technology, Trans Tech Publications 89: 1–9 (2014)
67. Qunfeng Z, Dong G, Martin J M. Green superlubricity of Nitinol 60 alloy against steel in presence of castor oil. Scientific Reports 6, 2016.
68. Bagherifard S, Fernandez-Pariente I, Ghelichi R, Guagliano M. Severe shot peening to obtain nanostructured surfaces: process and properties of the treated surfaces. Handbook of Mechanical Nanostructuring, 299–323(2015)
69. Unal O, Varol R, Erdogan A, Gok M S. Wear behaviour of low carbon steel after severe shot peening. Materials Research Innovations 17(7): 519–523 (2013)
70. Besharati-Givi M K, Asadi P. Advances in Friction-stir Welding and Processing. Elsevier, Amsterdam, the Netherlands, 2014.
71. Seraj R A, Abdollah-Zadeh A, Hajian M, Kargar F, Soltanalizadeh R. Microstructural evolution and wear resistance of friction stir-processed AISI 52100 steel. Metallurgical and Materials Transactions A 47(7): 3564–3572 (2016)
72. Singh S, Ramakrishna S, Singh R. Material issues in additive manufacturing: A review. Journal of Manufacturing Processes 25: 185–200 (2017)
73. Frazier W E. Metal additive manufacturing: A review. Journal of Materials Engineering and Performance 23(6): 1917–1928 (2014)
74. Baig U M, Khan A A, Rajakumar D R. Wear characterization of direct steel–H20 specimens produced by additive manufacturing techniques. In Advances in 3D Printing & Additive Manufacturing Technologies. Wimpenny D I, Pandey P M, Kumar L J (eds). Springer, Singapore, 2017, 121.
75. Kasonde M, Kanyanta V. Future of superhard material design, processing and manufacturing. In Microstructure- Property Correlations for Hard, Superhard, and Ultrahard Materials. Kanyanta V (ed.). Springer, Singapore, 2016: 211–239.
76. Bartolomeu F, Sampaio M, Carvalho O, Pinto E, Alves N, Gomes J R, Miranda G. Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting. Journal of the Mechanical Behavior of Biomedical Materials 2017.
77. Sundararajan G, Joshi S V, Krishna L R. Engineered surfaces for automotive engine and power train components. Current Opinion in Chemical Engineering 11: 1–6 (2016)
78. Jacobson S, Hogmark S. Surface modifications in tribological contacts. Wear 266: 370–378 (2009)
79. Goldbaum D, Poirier D, Irissou E, Legoux J G, Moreau C. Review on Cold Spray Process and Technology US Patents. In Modern Cold Spray. Springer International Publishing, 2015: 403–429.
80. Timur S, Kartal G, Eryilmaz O L, Erdemir A. U.S. Patent No. 8,951,402. Washington, DC: U.S. Patent and Trademark Office, 2015.
81. Holmberg K, Matthews A. Coatings Tribology–Properties, Mechanisms, Techniques and Applications in Surface Engineering. Elsevier Tribology and Interface Engineering Elsevier Series. Amsterdam, the Netherlands: Elsevier; 2009.
82. Berman D, Deshmukh S A, Sankaranarayanan S K R S, Erdemir A, Sumant A V. Macroscale superlubricity enabled by graphene nanoscroll formation. Science express 14 May 2015/10.1126/science.1262024.
83. Ronkainen H, Elomaa O, Varjus S, Kilpi L, Jaatinen T, Koskinen J. The influence of carbon based coatings and surface finish on the tribological performance in high-load contacts. Tribology International 96: 402–409 (2016)
84. Yang J, Xia Y, Song H, Chen B, Zhang Z. Synthesis of the liquid-like graphene with excellent tribological properties. Tribology International 105: 118–124 (2017)
85. Davis J R (Ed.). Handbook of Thermal Spray Technology. TTS ASM Thermal Spray Society, ASM International, USA, 2004.
86. Gerard B. Application of thermal spraying in the automotive industry. Surface and Coatings Technology 201: 2028–2031 (2006)
87. Lima R S, Marple B R. Thermal spray coatings engineered from nanostructural ceramic agglomerated powders for structural, thermal barrier and biomedical applications: A review. Journal of Thermal Spray Coatings 16: 40–63 (2007)
88. Pawlowski L. The Science and Engineering of Thermal Spray Coatings. 2nd edition. John Wiley & Sons, Chichester, England, 2008.
89. Castro R M, Cavaler L C C, Marques F M, Bristot V M, Rocha A S. Comparative of the tribological performance of hydraulic cylinders coated by the process of thermal spray HVOF and hard chrome plating. Tribology in Industry 36: 79–89 (2014)
90. Kovalchenko A, Ajayi O O, Erdemir A, Fenske G R, Etsion I. The effect of laser texturing of steel surface and speed-load parameters on lubrication regime transition from boundary to hydrodynamic. Tribology Transactions 47: 299–307 (2004)
91. Klingerman Y, Etsion I, Shinkarenko A. Improving tribological performance of piston rings by partial surface texturing. Transactions of the ASME, Journal of Tribology 127: 632–638 (2005)
92. Ryk G, Etsion I. Testing piston rings with partial laser surface texturing for friction reduction. Wear 261: 792–796 (2006)
93. nd edition. Totten G (ed.). CRC Taylor & Francis, London, UK, Vol 2, Chapter 53, 2012.
94. Etsion I, Sher E. Improving fuel efficiency with laser surface textured piston rings. Tribology International 42: 542–547 (2009)
95. Ishida Y, Usami H, Hoshino Y. Effect of micro dimples on frictional properties in boundary lubrication condition. In Proceedings of the World Tribology Congress, Kyoto, Japan, 2009.
96. Wang X, Yu H, Huang W. Surface texture design for different circumstances. In Proceedings of the 1st International Brazilian Conference on Tribology, TriboBR 2010, Rio de Janeiro, Brazil, 2010: 97–107.
97. Canter N. Tribocatalysis: A new extreme pressure lubrication approach. Tribology and Lubrication Technology 72(10): 10–11 (2016)
98. Varenberg M, Ryk G, Yakhnis A, Kligerman Y, Kondekar N, McDowell M T. Mechano-chemical surface modification with Cu2S: Including superior lubricity. Tribology Letters 64(28): 1–7 (2016)
99. Holmberg K, Laukkanen A, Ghabchi A, Rombouts M, Turunen E, Waudby R, Suhonen T, Valtonen K, Sarlin E. Computational modelling based wear resistance analysis of thick composite coatings. Tribology International 72: 13–30 (2014)
100. Holmberg K, Laukkanen A, Turunen E, Laitinen T. Wear resistance optimisation ofcomposite coatings bycomputational microstructural modelling and simulation. Surface and Coatings Technology 247: 1–13 (2014)
101. Laukkanen A, Holmberg K, Ronkainen H, Stachowiack G, Podsiadlo P, Wolski M, Gee M, Gachot C, Li L. Topographical orientation effects on surface stresses influencing on wear in sliding DLC contacts, Part 2: Modelling and simulations. Wear, in press, 2017.
102. Schmitz GJ, Prahl U (eds). Handbook of Software Solutions for ICME. Wiley-VCH Verlag GmbH & Co, Weinheim, Germany, 2017.
103. Jacobs T D, Carpick R W. Nanoscale wear as a stress-assisted chemical reaction. Nature Nanotechnology 8(2): 108–112 (2013)
104. Berman D, Erdemir A, Sumant A V. Graphene: A new emerging lubricant. Materials Today 17(1): 31–42 (2014)
105. Khare V, Pham M Q, Kumari N, Yoon H S, Kim C S, Park J I, Ahn S H. Graphene–ionic liquid based hybrid nanomaterials as novel lubricant for low friction and wear. ACS Applied Materials & Interfaces 5(10): 4063–4075 (2013)
106. Spear J C, Ewers B W, Batteas J D. 2D-nanomaterials for controlling friction and wear at interfaces. Nano Today 10(3): 301–314 (2015)