Energy consumption due to friction in motored vehicles and low-friction coatings to reduce it

Coating Technology for Vehicle Applications

Volumn , Issue , 2015, Pages 1-24

  Erdemir, Ali ^a   Holmberg, Kenneth ^b  

^a ARGONNE NATIONAL LABORATORY   (United States)

^b VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

Author keywords

Emissions; Energy efficiency; Friction; Internal combustion engines; Low friction coatings

Indexed keywords

AUTOMOBILE COOLING SYSTEMS; COATINGS; COOLING SYSTEMS; ENERGY DISSIPATION; ENERGY UTILIZATION; ENGINES; FRICTION; FUELS; GAS EMISSIONS; GREENHOUSE GASES; INTERNAL COMBUSTION ENGINES; PARTICULATE EMISSIONS; PETROLEUM DEPOSITS; PETROLEUM TRANSPORTATION; PROVEN RESERVES; TRIBOLOGY; VEHICLES;

FRICTION CONTROL; GLOBAL AWARENESS; GOVERNMENTAL REGULATIONS; HEAVY DUTY VEHICLES; LOW FRICTION COATINGS; PARASITIC ENERGY LOSS; TRANSPORTATION SYSTEM; TRANSPORTATION VEHICLES;

ENERGY EFFICIENCY;

EID: 84943790347     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-319-14771-0_1     Document Type: Chapter

References (82)

1. Dowson D.: History of Tribology, 2nd ed. New York: Wiley (1998).
2. Nosonovsky, M.: Oil as a lubricant in the ancient Middle East, Tribology Online, 2, 44–49 (2007).
3. Holmberg, K., Matthews, A.: Coatings Tribology – Properties, Mechanisms, Techniques and Applications in Surface Engineering. Elsevier Tribology and Interface Engineering Series no 56, Elsevier, Amsterdam, (2009).
4. Erdemir, A.: Solid Lubricants and Self-lubricating Films, In: Bhushan, B., (ed.) Handbook of Modern Tribology, pp. 787–818, CRC Press, Boca Raton, (2001).
5. Donnet, C., and Erdemir, A.: Solid Lubricant Coatings: Recent Developments and Future Trends, Tribology Letters, 17, 389–397 (2004)
6. Erdemir, A., and Martin, J.-M. (eds.): Superlubricity, Elsevier, Amsterdam 2007.
7. Holmberg, K., Andersson, A., Nylund, N.O., Mäkelä, K., Erdemir, A.: Global energy consumption due to friction in trucks and buses. Tribology International, 78, 94–114 (2014).
8. Rahnejat, H., Balakrishnan, S., King, P. D., & Howell-Smith, S.: In-cylinder friction reduction using a surface finish optimization technique. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220(9), 1309–1318 (2006).
9. Holmberg, K., Andersson, P., Erdemir, A.: Global energy consumption due to friction in passenger cars. Tribology International 47, 221–234 (2012).
10. Holmberg K, Siilasto R, Laitinen T, Andersson A, Jäsberg A.: Global energy consumption due to friction in paper machines. Tribol. Int.; 62, 58–77 (2013).
11. Rudnick, L. R., and Shubkin, R. L. (eds.): Synthetic Lubricants and High-Performance Functional Fluids, Marcel Dekker, New York 1999.
12. Bartz, W. J.: Lubricants and Lubrication Engineering-A Review, Wear, 491–18 (1978).
13. Taylor, R. I., and Coy, R. C.: Improved fuel efficiency by lubricant design: a review, Journal of Engineering Tribology, 214, 1–15 (2000).
14. Shore, P.: Challenges for Lubricant Additives, Automotive Design, pp. 54-56, September 2010.
15. Spikes, H. A.: Low- and zero-sulphated ash, phosphorus and sulphur anti-wear additives for engine oils, Lubrication Science, 20, 103–136 (2008).
16. Taylor, R. I, Mainwaring, R., and Mortier, R. M.: Engine Lubricant Trends Since 1990, Proc. IMechE, Part J: J. Eng. Tribol., 219, 331–346 (2005).
17. Atkinson, D. Brown, A. J. Jilbert, D., and Lamb, G.: Formulation of Automotive Lubricants, In: Mortier R. M., Fox, M. F., Orzsulik, S.T., (Eds) Chemistry and Technology of Lubricants, Springer, New York 2010.
18. Rudnick, L. R.: Lubricant Additives: Chemistry and Applications, CRC Press, Boca Raton, FL 2009.
19. Hirsch, J., and Laukli, H. I.: Aluminium in innovative light-weight car design, Materials Transactions 52 (5), 818–824 (2011).
20. IEA Key World Energy Statistics 2013. OECD/IEA International Energy Agency, Paris, France (2013).
21. IEA Redrawing the energy-climate map. OECD/IEA International Energy Agency, Paris, France, (2013).
22. EU Transport in figures, Statistical pocketbook 2012. European Commission, Brussels, Belgium, (2012).
23. World Energy Council, Global Transport Scenarios 2015. WEC, London, UK, (2011).
24. Rodrigue J.P.: The Geography of Transportation Systems. 3rd edition, Routledge, New York, (2013).
25. Holmberg K, Erdemir A, Global impact of friction on energy use in transportation and industry. Proc. of 2nd Int. Brazilian Conf. on Tribology – TriboBR 2014, 3–5.11, 2014, Foz do Iguacu, Brazil.
26. UIC 2012, International Union on Railways. Synopsis 2012, http://www.uic.org/spip.php?rubrique144910.3.2014.
27. GAMA, General aviation 2012, Statistical Data Book & Industrial Outlook, General Aviation Manufacturers Association, http://www.gama.aero/files/GAMA7233_AR_FINAL_LOWRES.pdf (2014).
28. Equasis Statistics, The world merchant fleet in 2011, Statistics of Equasis, http://www.equasis.org/EquasisWeb/public/HomePage?fs=HomePage (2014).
29. ICOMIA 2012, Recreational boating Industry Statistics 2012. International Council of Marine Industry Associations ICOMIA http://www.icomia.com/(2014).
30. Zhmud, B.: Developing energy-efficient lubricants and coatings for automotive applications, Tribology and Lubrication Technology, 42–49 (2011).
31. Donnet, C., and Erdemir, A. (eds.): Tribology of Diamond-like Carbon Coatings: Fundamentals and Applications, Springer, Amsterdam (2008).
32. Björling, M., Isaksson P., Marklund P., and Larsson R.: The influence of DLC coating on EHL friction coefficient, Tribology Letters 47(2) 285–294 (2012).
33. Bewilogua, K., and Hofmann, D.: History of diamond-like carbon films—From first experiments to worldwide applications, Surface and Coatings Technology 242, 214–225 (2014).
34. Vetter, J., Ackerman, C., Meunier, F., Jarry, O., Schumacher, D., and Erkens, G.: High performance hard carbon coatings (diamond-like coatings), Vakuum, 2418–23 (2012).
35. Vetter, J.: 60 years of DLC coatings: Historical highlights and technical review of cathodic arc processes to synthesize various DLC types, and their evolution for industrial applications, Surface and Coatings Technology, (2014). doi.org/10.1016/j.surfcoat.2014.08.017.
36. Rejowski, E. D., Mordente Sr, P., Pillis, M. F., and Casserly, T.: Application of DLC Coating in Cylinder Liners for Friction Reduction (Paper No. 2012-01-1329), SAE Technical Paper (2012)
37. Kosarieh, S., Morina, A., Lainé, E., Flemming, J., and Neville, A.: Tribological performance and tribochemical processes in a DLC/steel system when lubricated in a fully formulated oil and base oil, Surface and Coatings Technology, 217, 1–12 (2013).
38. Forsberg, P., Gustavsson, F., Renman, V., Hieke, A., and Jacobson, S.: Performance of DLC coatings in heated commercial engine oils, Wear 304 (1), 211–222 (2013).
39. Doerwald, D., and Jacobs, R.: Pegasus Project—DLC Coating and Low Viscosity Oil Reduce Energy Losses Significantly, Galvanotechnik 103(3) 586 (2012).
40. Hosenfeldt, T., Musayev, Y., and Schulz, E.: Customized Coating Systems for Products with Added Value From Development to High-Volume Production, in Proc. 37th International Conference on Advanced Ceramics and Composites, (2013).
41. Musayev, Y.: Innovative Surface Technology for Customized Tribological Systems, SAE Technical Paper 2014-01-1019 (2014).
42. Woydt, M., Scholz C., Manier C‐A., Brückner A., and V. Weihnacht.: Slip‐rolling resistance of ta‐C and a‐C coatings up to 3,000 MPa of maximum Hertzian contact pressure, Materialwissenschaft und Werkstofftechnik, 43(12), 1019–1028 (2012).
43. Haque, T., Morina A., and Neville A.: Influence of friction modifier and antiwear additives on the tribological performance of a non-hydrogenated DLC coating, Surface and Coatings Technology 204(24), 4001–4011 (2010).
44. Mutafov, P., Lanigan, J., Neville, A., Cavaleiro, A., and Polcar, T.: DLC-W coatings tested in combustion engine-frictional and wear analysis, Surface and Coatings Technology (2014), DOI: 10.1016/j.surfcoat.2014.06.072.
45. Yue, W., Liu, C., Fu, Z., Wang, C., Huang, H., and Liu J.: Effects of molybdenum dithiocarbamate and zinc dialkyl dithiophosphate additives on tribological behaviors of hydrogenated diamond-like carbon coatings, Materials & Design, 64, 601–607 (2014).
46. Gangopadhyay, A., Zdrodowski, R. J., and Simko, S. J.: Interactions of Diamond-Like Carbon Coatings with Fully Formulated Engine Oils, Tribology Transactions 57(3), 503–514 (2014).
47. Ciarsolo, I., Fernandez, X, RuizdeGopegui, U. Zubizarreta, C. Abad, M. D. Mariscal, A. Caretti, I. Jiménez, I., and Sánchez-López, J. C.: Tribological comparison of different C-based coatings in lubricated and unlubricated conditions, Surface and Coatings Technology (2014), DOI: 10.1016/j.surfcoat.2014.07.068.
48. An, Y., Zhang, K., Wang, D., Zhang, J., and Zhang, B.: Advanced Solid Lubricant Technology Improve Engine Performance, In Proceedings of the FISITA 2012 World Automotive Congress, pp. 839-849. Springer, Heidelberg (2013).
49. Michalczewski, R., Kalbarczyk, M., Piekoszewski, W., Szczerek, M., and Tuszynski, W.: The rolling contact fatigue of WC/C-coated spur gears, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology (2013), DOI: 10.1177/1350650113478179.
50. Erdemir, A.: Rolling-Contact Fatigue and Wear Resistance of Hard Coatings on Bearing Steel Substrates, Surface and Coatings Technology, 54/55482-489 (1992).
51. Doll, G.: Life-limiting wear of wind turbine bearings: Root cause and solutions. 18th Int. Conf. on Wear of Materials, 3-7.4.2011, Philadelphia.
52. Bayón, R., Zubizarreta, C., Nevshupa, R., Rodriguez, J. C., Fernández, X., de Gopegui, U. R., and Igartua, A.: Rolling-sliding, scuffing and tribocorrosion behaviour of PVD multilayer coatings for gears application, Industrial Lubrication and Tribology 63(1), 17–26 (2011).
53. Vengudusamy, B., Grafl, A., and Preinfalk, K.: Influence of Silicon on the Wear Properties of Amorphous Carbon Under Dry and Lubricated Conditions, Tribology Letters, 53(3), 569-583 (2014).
54. Amanov, Auezhan, Tsukasa Watabe, Ryo Tsuboi, and Shinya Sasaki. "Improvement in the tribological characteristics of Si-DLC coating by laser surface texturing under oil-lubricated point contacts at various temperatures." Surface and Coatings Technology 232 (2013): 549-560.
55. Silva, F. J. G., Martinho R. P., and A. P. M. Baptista. "Characterization of laboratory and industrial CrN/CrCN/diamond-like carbon coatings." Thin Solid Films 550 (2014): 278–284.
56. Keunecke, M., Bewilogua K., Becker J., Gies A., and Grischke M. "CrC/aC: H coatings for highly loaded, low friction applications under formulated oil lubrication." Surface and Coatings Technology 207 (2012): 270–278.
57. Enomoto Y., and Yamamoto T.: New materials in automotive tribology. Tribology Letters 5, 13–24 (1998).
58. Vetter J., Barbezat, G., Crummenauer, J., and Avissar, J.: Surface treatment selections for automotive applications, Surface and Coatings Technology 200, 1962–1968 (2005).
59. Holmberg, K., Laukkanen, A., Ronkainen, H., Wallin, K.: Tribological analysis of fracture conditions in thin surface coatings by 3D FEM modelling and stress simulations, Tribology International, 38, 1035–1049 (2005).
60. Holmberg, K., Laukkanen, A., Wear Models, In: Bruce, R. (ed.) Handbook on Lubrication and Tribology, Vol. II Theory and Design, 2nd edition, Chapter 13, 13:1-21, CRC Press, New York, (2012).
61. Erdemir, A., Voevodin, A. A.: Nanocomposite coatings for severe applications. In: Martin, P (Ed.), Handbook of Deposition Technologies for Films and Coatings Science, Applications and Technology, Elsevier, Amsterdam, pp. 679–715 (2010).
62. Erdemir, A., Donnet, C.: Tribology of diamond-like carbon films: Current status and future prospects. Topical review, Journal of Physics D: Applied Physics, 39, R311–327 (2006).
63. Kano, M.: DLC coating technology applied to sliding parts of automotive engine, New Diamond and Frontier Carbon Technology, 16, 201–210 (2006).
64. Martin, J. M., Barros Bouchet, M. I., Sagawa, T.: Green tribology: Lubricant compliant superhard DLC coatings, Proc. 4th World Tribology Conf., Kyoto, Japan, (2009).
65. Barros Bouchet, M., Martin, J. M.: The future of boundary lubrication by carbon coatings and environmentally friendly additives. In: Luo J., Meng Y., Shao T., Zhao Q. (eds) Advanced Tribology, Proc. CIST & ITS-IFToMM Beijing, China, Tsinghua Univ. Press, Springer, 2010, pp. 598–599 (2008).
66. Martin, J. M., Barros Bouchet, M. I., Matta, C., Zhang, Q., Goddard III, W. A., Okuda, S., Sagawa, T.: Gas-phase lubrication of a ta-C by glycerol and hydrogen peroxide: Experimental and computer modelling. J. Phys. Chem. C 114, 5003–5011 (2010).
67. Götze, A., et al.: Tetrahedral Amorphous Carbon Coatings for Friction Reduction of the Valve Train in Internal Combustion Engines, Advanced Engineering Materials (2014) DOI: 10.1002/adem.201400188.
68. Podgornik, B., and J. Vižintin.: Tribological reactions between oil additives and DLC coatings for automotive applications, Surface and Coatings Technology 200(5), 1982–1989 (2005).
69. Barros Bouchet, M. I., Zilibotti, G., Matta, C., Righi, M. C., Vandenbulcke, L., Vacher, B., and Martin, J. M.: Friction of Diamond in the Presence of Water Vapor and Hydrogen Gas. Coupling Gas-Phase Lubrication and First-Principles Studies, The Journal of Physical Chemistry C, 116(12), 6966–6972 (2012).
70. Gåhlin, R., Larsson, M., Hedenqvist, P.: ME-C:H coatings in motor vehicles, Wear 249302– 309 (2001).
71. Ferrarese, A., Banfield, R., and Tomanik, E.: High Value PVD Top Ring for High Speed Diesel Engines, SAE Technical Paper 2008-01-0793 (2008).
72. Lampe, T., Eisenberg, S., Rodriguez Cabeo, E.: Plasma surface engineering in automotive industry – Trends and future perspectives, Surface and Coatings Technology 174-175 1-7 (2003).
73. Merlo, A. M.: The contribution of surface engineering to the product performance in the automotive industry. Surface and Coatings Technology, 174-175, 21-26 (2003).
74. Tung, S. C., McMillan, M. L.: Automotive tribology overview of current advances and challenges for the future. Tribology International, 37, 517–536 (2004).
75. Canter, N., BAM: Antiwear and friction-reducing coating, Tribology and Lubrication Technology, March, pp. 14–15 (2009)
76. Cook, B. A., Harringa, J. L., Anderegg, J., Russell, A. M., Qu, J., Blau, P., Higdon, C., Elmoursi, A. A.: Analysis of wear mechanisms in low-friction AlMgB14-TiB2 coatings, Surface and Coatings Technology 205, 2296–2301 (2010).
77. Farley, J., Wrobel, L. C., Mao, K.: Performance evaluation of multilayer thin film coatings under mixed rolling-sliding contact conditions. Wear, 268, 269–276 (2010).
78. Klingerman, Y., Etsion, I., Shinkarenko, A.: Improving tribological performance of piston rings by partial surface texturing. J. Tribology, Trans. ASME 127, 632–638 (2005).
79. Etsion, I., Sher, E.: Improving fuel efficiency with laser surface textured piston rings, Tribology International, 42, 542–547 (2009).
80. Ryk, G., and Etsion, I.: Testing piston rings with partial laser surface texturing for friction reduction, Wear, 261(7), 792–796 (2006).
81. Johansson, S.: A surface engineering approach to reduction of frictional losses of heavy duty diesel engines. PhD Thesis, Chalmers University of Technology, Dept. Materials and Manufacturing, Gothenburg, Sweden, (2012).
82. Voevodin, A., Fitz, T. A., Hu, J. J., and Zabinski, J. S.: Nanocomposite tribological coatings with “chameleon” surface adaptation, J. Vac. Sci. Technol. A 20, 1434–1444 (2002).