Future of superhard material design, processing and manufacturing

Microstructure-Property Correlations for Hard, Superhard, and Ultrahard Materials

Volumn , Issue , 2016, Pages 211-239

  Kasonde, Maweja ^a   Kanyanta, Valentine ^a  

^a ELEMENT SIX LTD   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

3D PRINTERS; BIOMIMETICS; CUTTING TOOLS; FUNCTIONALLY GRADED MATERIALS; PROCESSING;

BRITTLE MATRICES; COMPLEX 3D SHAPES; CONVENTIONAL PROCESSING; FUNCTIONALLY GRADED STRUCTURE; MANUFACTURING PROCESS; MATERIAL DESIGNS; NANO-STRUCTURING; SUPERHARD MATERIAL;

FRACTURE TOUGHNESS;

EID: 85013128212     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-319-29291-5_7     Document Type: Chapter

References (81)

1. Abdul-Baqi A, Schreurs P, Geers M (2005) Fatigue damage modelling in solder interconnects using a cohesive zone approach. Int J Solids Struct 42:927-942
2. Ahn S-H, Yoon H-S, Jang K-H, Kim E-S, Lee H-T et al (2015) Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB). CIRP Ann Manuf Technol 64(1):523-526, ISSN 0007-8506
3. Amada S (1995) Hierarchical functionally gradient structures of bamboo. Funct Gradient Mater 20(1):35-37
4. Amada S, Ichikawa Y, Munekata T, Nagase Y, Shimizu H (1997) Fibre texture and mechanical graded structure of bamboo. Compos Part B: Eng 28(1-2):13-20
5. Arias I, Serebrinsky S, OrtizM(2004) A cohesive model of fatigue of ferroelectric materials under electro-mechanical cyclic loading. Active Mater Behav Mech Proc SPIE, 371-377
6. Arsecularatne JA, Zhang LC, Montross C (2005) Wear and tool life of tungstene carbide, PCBN and PCD tools. Int J Mach Tools Manuf 46(5):482-491
7. Baccaccini A (2005) Glass-containing composite materials: Alternative reinforcement concepts. In: Handbook of ceramic composites. Springer
8. Bostan Barry J, Byrne G (2001) Cutting tool wear in the machining of hardened steels: Part II: Cubic boron nitride cutting tool wear. Wear 247(2):152-160, ISSN 0043-1648
9. Barthelat F (2007) Biomimetics for next generation materials. Philos Trans R Soc A 365:2907-2919
10. Barthelat F (2010) Nacre from mollusc shells: A model for high-performance structural materials. Bioinsp Biomim 5:035001
11. Barthelat F, Espinosa HD (2007) An experimental investigation of deformation and fracture of nacre - mother of pearl. Exp Mech 47:311-324
12. Barthelat F, Li CM, Comi C, Espinosa HD (2006) Mechanical properties of nacre constituents and their impact on mechanical performance. J Mater Res 21:1977-1986
13. Barthelat F, Tang H, Zavattieri PD, Li CM, Espinosa HD (2007) On the mechanics of mother-ofpearl: A key feature in the material hierarchical structure. J Mech Phys Solids 55:306-337
14. Becher P (1991) Microstructural design of toughened ceramics. J Am Ceram Soc 74:255-269
15. Bechtle S, Fung Ang S, Schneider GA (2010) On the mechanical properties of hierarchically structured biological materials. Biomaterials 31:6378-6385
16. Brookes KJA (2015) 3D-printing style additive manufacturing for commercial hardmetals. Metal Powder Rep 70(3):137-140, ISSN 0026-0657
17. Buskirk SR, Venkataraman S, Ifiu PG, Rapoff AJ (2002) Functionally graded biomimetic plate with hole Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures. Struct Dyn and Mat Conf 2:1015-1021
18. Carolan D, Ivanković A, Murphy N (2013 a) A combined experimental-numerical investigation of fracture of polycrystalline cubic boron nitride. Eng Fract Mech 99:101-117. doi:10.1016/j. engfracmech.2012.09.008, ISSN 0013-7944
19. Carolan D, Tuković Z, Murphy N, Ivanković A (2013 b) Arbitrary crack propagation in multiphase materials using the finite volume method. Comput Mater Sci 69:153-159, ISSN 0927-0256
20. Chaia H, Lawn BR (2004) Fracture mode transitions in brittle coatings on compliant substrates as a function of thickness. J Mater Res 19(6):1752-1761
21. Chen P-Y, McKittrick J, Meyers MA (2012) Biological materials: Functional adaptations and bio-inspired designs. Prog Mater Sci 57:1492-1704
22. Droty MD, Dauskardt RH, Kant A, Ritchie RO (1995) Fracture of synthetic diamond. J Appl Phys 78(5):3083-3088
23. Evans A (1997) Design and life prediction issues for high-temperature engineering ceramics and their composites. Acta Mater 45(1):23-40
24. Evans A, Heuer A, Porter D (1997) The fracture toughness of ceramics. In 4th conference on fracture, Canada
25. Faes M, Valkenaers H, Vogeler F, Vleugels J, Ferraris E (2015) Extrusion-based 3D printing of ceramic components. Proc CIRP 28:76-81, ISSN 2212-8271
26. Fu Z, Schlier L, Travitzky N, Greil P (2013) Three-dimensional printing of SiSiC lattice truss structures. Mater Sci Eng A 560:851-856, ISSN 0921-5093
27. Giménez S, Van der Biest O, Vleugels J (2007) The role of chemical wear in machining iron based materials by PCD and PCBN super-hard tool materials. Diamond Relat Mater 16:435-445
28. Goel P, Khan ZA, Siddiquee AN, Gupta RK (2012) Influence of slab milling process parameters on surface integrity of HSLA: A multi-performance characteristics optimization. Int J Adv Manuf Technol 61(9-12):859-871
29. Habibi MK, Samaei AT, Gheshlaghi B, Lu J, Lu Y (2015) Asymmetric flexural behavior from bamboo’s functionally graded hierarchical structure: Underlying mechanisms. Acta Biomater 16(2015):178-186
30. He M, Hutchinson J (1989) Int J Solids Struct 25:1053-1067
31. Hutchinson J (1989) Mechanisms of toughening in ceramics. In Theoretical and applied mechanics, IUTAM. Elsevier Science Publishers B.V. North-Holland
32. Jager I, Fratzl P (2000) Mineralised collagen fibrils: A mechanical model with a staggered arrangement of mineral particles. Biophysics 79:1737-1746
33. Jeong-Ho K, Paulino G (2002) Mixed-mode fracture of orthotropic functionally graded materials using finite element and the modified crack closure method. Eng Fract Mech 69:1557-1586
34. Karambelasa G, Santhanama S, Wing ZN (2013) Strombus gigas inspired biomimetic ceramic composites via SHELL - sequential hierarchical engineered layer lamination. Ceram Int 39:1315-1325
35. Kennam et al (2015) High-temperature machining guide. Machining guides. www.kennametal. com. Accessed 05 Nov 2015
36. Khan U, May P, O’Neill A, Coleman J (2010) Development of stiff, strong, yet tough composites by the addition of solvent exfoliated graphene to polyurethane. Carbon 48(14):4035-4041
37. Lee JJW, Morris D, Constantino PJ, Lucas PW, Smith TM, Lawn BR (2010) Properties of tooth enamel in great apes. Acta Biomater 6(12):1742-7061. doi:10.1016/j.actbio.2010.07.023, ISSN 4560-4565
38. Li J, Shi X, Wang L, Liu F (2007) Synthesis of biomorphological mesoporous TiO2 templated by mimicking bamboo membrane in supercritical CO2. J Colloid Interface Sci 315(1):230-236
39. Li G, Li P, Yu Y, Jia X, Zhang S, Yang X, Ryu S (2008 a) Novel carbon fiber/epoxy composite toughened by electrospun polysulfone nanofibers. Mater Lett 62:511-514
40. Li G, Li P, Zhang C, Yu Y, Liu H, Zhang S, Jia X, Yang X, Xue S (2008 b) Inhomogeneous toughening of carbon fiber/epoxy composite using electrospun polysulfone nanofibrous membranes by in situ phase separation. Compos Sci Technol 68:987-994
41. Lin A, Meyers MA (2005) Growth and structure in abalone shell. Mater Sci Eng A 390:27-41
42. Lin S, Xiong D, Liu M, Bai S, Zhao X (2014) Thermophysical properties of SiC/Al composites with three dimensional interpenetrating network structure. Ceram Int 40:7539-7544
43. Magniez K, Chaffraix T, Fox B (2011) Toughening of a carbon-fibre composite using electrospun poly(hydroxyether of Bisphenol A) nanofibrous membranes through inverse phase separation and inter-domain etherification. Materials 4:1967-1984
44. McNamara D, Alveen P, Carolan D, Murphy N, Ivanković A (2015) Fracture toughness evaluation of polycrystalline diamond as a function of microstructure. Eng Fract Mech 143:1-16, ISSN 0013-7944
45. Mishnaevsky LJ (2005) Numerical experiments in the mesomechanics of materials. Darmstadt University of Technology, Germany
46. Morrell R, Danzer R, Supanic P, Harrer W, Puchegger S, Peterlik H (2010) Meso-scale mechanical testing methods for diamond composite materials. Int J Refract Met Hard Mater 28(4):508-515
47. Mortensen A, Suresh S (1997) Functionally graded metals and metal-ceramic composites. Int Mater Rev 42(3):85-116
48. Munch E, Launey ME, Alsem DH, Saiz E, Tomsia AP, Ritchie RO (2008) Tough, bio-inspired hybrid materials. Science 322:1516-1520
49. NanoSteel (2015) NanoSteel at Powder Met 2015. Powder Met (MPIF), San Diego, 17-20 May
50. Narutaki N, Yamane Y (1979) Tool wear and cutting temperature of cBN tools in machining of hardened steels. Ann ICRP 28(1):23-28
51. Nassif N, Pinna N, Gerhke N, Antonietti M et al (2005) Amorphous layer around aragonite platelets in nacre. Proc Natl Acad Sci USA 102:12653-12655
52. Neumann P (1969) Coarse slip model in fatigue. Acta Metall 17:1219-1225
53. Okamoto S, Nakazono Y, Otsuka K, Shimoitani Y, Takada J (2005) Mechanical properties of WC/Co cemented carbide with larger WC grain size. Mater Charact 55(4-5):281-287, ISSN 1044-5803
54. Oksman K, Craig C (1998) Mechanical properties and morphology of impact modified polypropylene-wood flour composites. J Appl Polym Sci 67:1503-1513
55. Petrovic M, Carolan D, Ivankovic A, Murphy N (2011) Role of rate and temperature on fracture and mechanical properties of PCD. Key Eng Mater 452(452-453):153-156
56. Rabiei R, Bekah S, Barthelat F (2010) Failure mode transition in nacre and bone-like materials. Acta Biomater 6:4081-4089
57. Raj R, Thompson L (1994) Design of the microstructural scale for optimum toughness in metallic composites. Acta Metall Mater 42(12):4135-4142
58. Ritchie R (1988) Mechanisms of fatigue crack propagation in metals, ceramics and composites: Role of crack-tip shielding. Mater Sci Eng A103:15-28
59. Ritchie R (1999) Mechanisms of fatigue-crack propagation in ductile and brittle solids. Int J Fract 100:55-83
60. Ritchie RO (2011) The conflicts between strength and toughness. Nat Mater 10:817-822
61. Roe K, Siegmund T (2003) An irreversible cohesive zone model for interface fatigue crack growth simulation. Eng Fract Mech 70:209-232
62. Roether J, Baccaccin A (2005) Dispersion-reinforced glass and glass-ceramic matrix composites. In Handbook of ceramic composites, United Kingdom, Springer, p 554
63. Sandvik Hard Materials (2005) Cemented carbide, Sandvik new developments and applications. http://www2.sandvik.com/sandvik
64. Sarikaya M (2002) Biomimetics: Nanomechanical design of materials through biology. In: ASCE engineering mechanics. Columbia University, New York
65. Scott D (2006) The history and impact of synthetic diamond cutters and diamond enhanced inserts on the oil and gas industry. Ind Diam Rev 66(1):48-55
66. Shao J-J, Vail TP, Wang Q-J, Jiang Y, Zhang X-L (2013) Anatomical references for tibial sagittal alignment in total knee arthroplasty: A comparison of three anatomical axes based on 3D reconstructed CT images. Chin Med J (Engl) 126(20):3840-3844
67. Shao Y, Zhao H-P, Feng X-Q, Gao H (2012) Discontinuous crack-bridging model for fracture toughness analysis of nacre. J Mech Phys Solids 60:1400-1419
68. Shum D, Hutchinson W (1990) On toughening by microcracks. Mech Mater 9:83-90
69. Song F, Bai YL (2003) Effects of nanostructures on the fracture strength of the interfaces in nacre. J Mater Res 18:1741-1744
70. Sowmya S, Bumgardener JD, Chennazhia KP, Naira SV, Jayakumar R (2013) Role of nanostructured biopolymers and bioceramics in enamel, dentin and periodontal tissue regeneration. Prog Polym Sci 38:1748-1772
71. Tan H, Wie Y (1998) Toughening mechanisms of nano-composite ceramics. Mech Mater 30:111-123
72. Torres-Sanchez C, Corney JR (2011) A novel manufacturing strategy for bio-inspired cellular structures. Int J Design Eng 4(1):5-22
73. Ural A, Krishnan VR, Papoulia KD (2009) A cohesive zone model for fatigue crack growth allowing for crack retardation. Int J Solids Struct 46:2453-2462
74. Walter M, Ravichandran G, Ortiz M (1997) Computational modelling of damage evolution in unidirectional fiber reinforced ceramic matrix composites. Comput Mech 20:192-198
75. Wang C, Huang Y, Zan Q, Guo H, Cai S (2000) Biomimetic structure design: A possible approach to change the brittleness of ceramics in nature. Mater Sci Eng C 11:9-12
76. Wang T, Dangsheng X, Tianle Z (2010) Preparation and wear behavior of carbon/epoxy resin composites with an interpenetrating network structure derived from natural sponge. Carbon 40:2435-2441
77. Wanga Y, Liu Z (2008) Tribological properties of high temperature self-lubrication metal ceramics with an interpenetrating network. Wear 265:1720-1726
78. Westraadt JE, Sigalas I, Neethling JH (2015) Characterisation of thermally degraded polycrystalline diamond. Int J Refract Met Hard Mater 48:286-292
79. Yun N, Won Y, Kim S (2004) Toughening of epoxy composite by dispersing polysulfone particle to form morphology spectrum. Polym Bull 52:365-372
80. Zhang Y, Sahasrabudhe H, Bandyopadhyay A (2015) Additive manufacturing of Ti-Si-N ceramic coatings on titanium. Appl Surf Sci 346(15):428-437, ISSN 0169-4332
81. Zimmermann M, Lahres M, Viens DV, Laube BL (1997) Investigations of the wear of cubic boron nitride cutting tools using Auger electron spectroscopy and X-ray analysis by EPMA. Wear 209(1-2):241-246, ISSN 0043-1648