Severe Shot Peening to Obtain Nanostructured Surfaces: Process and Properties of the Treated Surfaces

Handbook of Mechanical Nanostructuring

Volumn 1, Issue , 2015, Pages 299-323

  Bagherifard, Sara ^a   Fernandez Pariente, Inés ^b   Ghelichi, Ramin ^a   Guagliano, Mario ^a  

^a POLITECNICO DI MILANO   (Italy)

^b UNIVERSITY OF OVIEDO   (Spain)

Author keywords

Grain refinement; Severe plastic deformation; Severe shot peening; Surface nanocrystallization

Indexed keywords

BIOCOMPATIBILITY; GRAIN REFINEMENT; GRAIN SIZE AND SHAPE; INDUSTRIAL RESEARCH; MECHANICAL PROPERTIES; MEDICAL APPLICATIONS; PLASTIC DEFORMATION; SHOT PEENING; STRUCTURAL METALS; TITANIUM ALLOYS;

BIOMEDICAL APPLICATIONS; DISLOCATION DENSITIES; MECHANICAL TREATMENTS; NANOSTRUCTURED SURFACE; SEVERE PLASTIC DEFORMATION PROCESS; SEVERE PLASTIC DEFORMATIONS; SURFACE NANOCRYSTALLIZATION; TREATMENT PARAMETERS;

SURFACE PROPERTIES;

EID: 84943561140     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527674947.ch14     Document Type: Chapter

References (56)

1. Almen, J.O. and Black, P.H. (1963) Residual Stresses and Fatigue in Metals, McGraw-Hill, New York.
2. Bagherifard, S., Ghelichi, R., and Guagliano, M. (2012) On the shot peening surface coverage and its assessment by means of finite element simulation: a critical review and some original developments. Appl. Surf. Sci., 259, 186-194.
3. Thum, A. and Ochs, H. (1932) Die Bekampfung der Korrosionsermudung-durch Druckvorspannung. Z. VDI, 76, 915-916.
4. Foppl, O. (1929) Das Drückender Oberfläche von Bauteilenaus Stahl. Stahl Eisen, 49, 575-577.
5. Guagliano, M. and Vergani, L. (2004) An approach for prediction of fatigue strength of shot peened components. Eng. Fract. Mech., 71, 501-512.
6. Pfeiffer, W. and Frey, T. (2006) Strengthening of ceramics by shot peening. J. Eur. Ceram. Soc., 26, 2639-2645.
7. Valiev, R.Z. (2004) Nanostructuring of metals by severe plastic deformation for advanced properties. Nat. Mater., 3, 511-516.
8. Umemoto, M. (2003) Nanocrystallization of steels by various severe plastic deformation. Mater. Trans., 44 (10), 1900-1911.
9. Bagheri, S. and Guagliano, M. (2009) Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys. Surf. Eng., 25 (1), 3-14.
10. Umemoto, M., Todaka, Y., and Tsuchiya, K. (2003) Formation of nanocrystalline structure in steels by air blast shot peening. Mater. Trans., 44 (7), 1488-1493.
11. Bagherifard, S., Ghelichi, R., and Guagliano, M. (2010) A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material. Surf. Coat. Technol., 204 (24), 4081-4090.
12. Bagherifard, S., Ghelichi, R., and Guagliano, M. (2014) Mesh sensitivity assessment of shot peening finite element simulation aimed at surface grain refinement. Surf. Coat. Technol., 243, 58-64.
13. Palacios, M., Bagherifard, S., Guagliano, M., and Fernández-Pariente, I. (2014) Influence of severe shot peening on wear behaviour of an aluminium alloy, Fatigue Fract. Eng. Mater. Struct., 37, 821-829.
14. Fernández-Pariente, I., Bagherifard, S., Ghelichi, R., Guagliano, M., Palacios, M., and Monge, R. (2012) Obtención de nanoestructuras en un aluminio industrial mediante tratamiento de shot peening utilizando altas energías. XII National Congress of Materials (IBEROMAT XII), Alicante, Spain.
15. Guagliano, M., Bagherifard, S., Fernandez Pariente, I., and Ghelichi, R. (2010) Effects of severe air blast shot peening on microstructure and residual stress state of Al alloys. Key Eng. Mater., 417-418, 393-396.
16. Bagherifard, S., Fernandez Pariente, I., Ghelichi, R., and Guagliano, M. (2010) Fatigue properties of nanocrystallized surfaces obtained by high energy shot peening. Procedia Eng., 2, 1683-1690.
17. Bagherifard, S. and Guagliano, M. (2012) Fatigue behaviour of a low-alloy steel with a nanostructured surface obtained by severe shot peening. Eng. Fract. Mech., 81, 56-68.
18. Bagherifard, S., Fernandez Pariente, I., Ghelichi, R., and Guagliano, M. (2013) Fatigue behavior of steel notched specimens with nanocrystallized surface obtained by severe shot peening. Mater. Des., 45, 497-503.
19. Bagherifard, S., Fernandez Pariente, I., Ghelichi, R., and Guagliano, M. (2012) Fatigue behavior of surface nanocrystallized metals produced by severe shot peening. XVI International Colloquium Mechanical Fatigue of Metals, Brno, Czech Republic.
20. ASTM E739-10. (2010) Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (e-N) Fatigue Data, American Society for Testing and Materials.
21. Klemenz, M., Hochrainer, Th., Delonnoy, L., Schulze, V., Vohringer, O., and Gumbsch, P. (2005) Similarity rulesfor the shot peening process based on finite element simulations. International Conference of Shot Peening ICSP, vol. 9, pp. 94-99.
22. Miao, H.Y., Larose, S., Perron, C., and Levesque, M. (2009) On the potential applications of a 3D random finite element model for the simulation of shot peening. Adv. Eng. Softw., 40 (10), 1023-1038.
23. Bagherifard, S., Ghelichi, R., and Guagliano, M. (2012) Numerical and experimental analysis of surface roughness generated by shot peening. Appl. Surf. Sci., 258 (18), 6831-6840.
24. ISO 4278. (1997) Geometrical Product Specifications (GPS) - Surface Texture: Profile Method Terms, Definitions and Surface Texture Parameters, 1st edn, International Standards Organization.
25. Niku-Lari, A. (1981) Shot peening. Proceedings of the 1st International Conference on Shot Peening, Paris, France, pp. 1-21.
26. Noyan, I.C. and Cohen, J.B. (1987) Residual Stress-Measurement by Diffraction and Interpretation, Springer-Verlag, New York.
27. Bagherifard, S., Fernandez-Pariente, I., Ghelichi, R., Guagliano, M. (2014) Effect of severe shot peening on microstructure and fatigue strength of cast iron, Int. J. Fatigue, 65, 64-70.
28. Hou, L.-F., Wei, Y.-H., Liu, B.-S., and Xu, B.-S. (2008) Microstructure evolutionof AZ91D induced by high energy shot peening. Trans. Nonferrous Met. Soc. China, 18, 1053-1057.
29. Zammit, A., Abela, S., Wagner, L., Mhaede, M., and Grech, M. (2013) Tribological behavior of shot peened Cu-Ni austempered ductile iron. Wear, 302, 829-836.
30. Saitoh, H., Ochi, T., and Kubota, M. 2008 Formation of surface nanocrystalline structure in steels by air blast shot peening. Proceedings of the 10th International Conference on Shot Peening, Tokyo, Japan, pp. 488-493.
31. Hanlon, T., Kwon, Y.N., and Suresh, S. (2003) Grain size effects on the fatigue response of nanocrystalline metals. Scr. Mater., 49, 675-680.
32. Padilla, H.A. and Boyce, B.L. (2010) A review of fatigue behavior in nanocrystalline metals. Exp. Mech., 50, 5-23.
33. Jiang, X.P., Wang, X.Y., Li, J.X., Li, D.Y., Man, C.S., Shepard, M.J., and Zhai, T. (2006) Enhancement of fatigue and corrosion properties of pure ti by sandblasting. Mater. Sci. Eng., A, 429, 30-35.
34. Roland, T., Retraint, D., Lu, K., and Lu, J. (2006) Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment. Scr. Mater., 54, 1949-1954.
35. Mikova, K., Bagherifard, S., Bokuvka, O., Guagliano, M., and Trsko, L. (2013) Fatigue behavior of X70 micro alloyed steel after severe shot peening. Int. J. Fatigue, 55, 33-42.
36. Petch, N.J. (1953) The cleavage strength of polycrystals. J. Iron Steel Inst., 174, 25-28.
37. Li, G., Chen, J., and Guan, D. (2010) Friction andwear behaviours ofnanocrys-tallinesurfacelayerofmediumcarbon steel. Tribol. Int., 43, 2216-2221.
38. Wang, Z.B., Tao, N.R., Li, S., Wang, W., Liu, G., Lu, J., and Lu, K. (2003) Effect of surface nanocrystallization on friction and wear properties in low carbon steel. Mater. Sci. Eng., A, 352, 144-149.
39. ASTM G77-05 (2010) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test, American Society for Testing and Materials.
40. Bergmann, G., Graichen, F., Rohlmann, A., Bender, A., Heinlein, B., Duda, G.N., Heller, M.O., and Morlock, M.M. (2010) Realistic loads for testing hip implants. Bio-Med. Mater. Eng., 20 (2), 65-75.
41. Trajkovski, B., Petersen, A., Strube, P., Mehta, M., and Duda, G.N. (2012) Intraoperatively customized implant coating strategies for local and controlled drug delivery to bone. Adv. Drug Delivery Rev., 64 (12), 1142-1151.
42. Khang, D., Lu, J., Yao, C., Haberstroh, K.M., and Webster, T.J. (2008) The role of nanometer and sub-micron surface features on vascular and bone cell adhesion on titanium. Biomaterials, 29, 970-983.
43. Puckett, S.D., Taylor, E., Raimondo, T., and Webster, T.J. (2010) The relationship between the nanostructure of titanium surfaces and bacterial attachment. Biomaterials, 31, 706-713.
44. Nikkhah, M., Edalat, F., Manoucheri, S., and Khademhosseini, A. (2012) Engineering microscale topographies to control the cell-substrate interface. Biomaterials, 33, 5230-5246.
45. Puckett, S.D. (2010) Select nanofabricated titanium materials for enhancing bone and skin growth of intraosseous transcutaneous amputation prostheses. PhD thesis. Brown University, Providence, RI, USA.
46. Klabunde, K.J., Stark, J., Koper, O., Mohs, C., Park, D.G., Decker, S., Jiang, Y., Lagadic, I., and Zhang, D. (1996) Nanocrystals as stoichiometric reagents with unique surface chemistry. J. Phys. Chem., 100, 12142-12153.
47. Webster, T.J., Siegel, R.W., and Bizios, R. (1999) Osteoblast adhesion on nanophase ceramics. Biomaterials, 20, 1221-1227.
48. Webster, T.J., Ergun, C., Doremus, R.H., Siegel, R.W., and Bizios, R. (2000) Enhanced functions of osteoblasts on nanophase ceramics. Biomaterials, 21, 1803-1810.
49. Webster, T.J. and Ejiofor, J.U. (2004) Increased osteoblast adhesion on nanophase metals: Ti, Ti6Al4V, and CoCrMo. Biomaterials, 25, 4731-4739.
50. Saldana, L., Mendez-Vilas, A., Jiang, L., Multigner, M., Gonzalez-Carrasco, J.L., Perez-Prado, M.T., Gonzalez-Martín, M.L., Munuera, L., and Vilaboa, N. (2007) In vitro biocompatibility of an ultrafine grained zirconium. Biomaterials, 28, 4343-4354.
51. Faghihi, S., Azari, F., Zhilyaev, A.P., Szpunar, J.A., Vali, H., and Tabrizian, M. (2007) Cellular and molecular interactions between MC3T3-E1 preosteoblasts and nanostructured titanium produced by high-pressure torsion. Biomaterials, 28, 3887-3895.
52. Ji, W.P., Han, P., Zhao, C.L., Jiang, Y., and Zhang, X.N. (2008) Increased osteoblast adhesion on nanophase Ti6Al4V. Chin. Sci. Bull., 53 (11), 1757-1762.
53. Kim, T.N., Balakrishnan, A., Lee, B.C., Kim, W.S., Dvorankova, B., Smetana, K., Park, J.K., and Panigrahi, B.B. (2008) In vitro fibroblast response to ultrafine grained titanium produced by a severe plastic deformation process. J. Mater. Sci. Mater. Med., 19, 553-557.
54. Gorth, D., Webster, T, Derda, J., and Champaigne, J. (2011) Proceedings 11th International Conference of Shot Peening (ICSP11), South Bend, Indiana, pp. 387-391.
55. Yu, B., Lesiuk, A., Davis, E., Irvin, R.T., and Li, D.Y. (2010) Surface nanocrystallization for bacterial control. Langmuir, 26 (13), 10930-10934.
56. Ko, Y.K., Lee, W.B., Lee, C.W., and Yoo, S. (2010) Nanocrystallized steel surface by micro-shot peening for catalyst-free carbon nanotube growth. Mater. Res. Bull., 45, 343-347.