Computational modelling based wear resistance analysis of thick composite coatings

Tribology International

Volumn 72, Issue , 2014, Pages 13-30

  Holmberg, K ^a   Laukkanen, A ^a   Ghabchi, A ^a   Rombouts, M ^b   Turunen, E ^a   Waudby, R ^a   Suhonen, T ^a   Valtonen, K ^c   Sarlin, E ^c  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^b FLEMISH INSTITUTE FOR TECHNOLOGICAL RESEARCH VITO   (Belgium)

^c TAMPERE UNIVERSITY OF TECHNOLOGY   (Finland)

Author keywords

Composite coatings; Modelling; Wear

Indexed keywords

COMPUTATIONAL MODELLING; CONTACT CONDITIONS; METAL-MATRIX COATINGS; MICRO-STRUCTURAL PROPERTIES; MICROSTRUCTURE AND PROPERTIES; ORDERS OF MAGNITUDE; RESISTANCE ANALYSIS; SPECIFIC MATERIALS;

CARBIDES; COMPOSITE COATINGS; MODELS; WEAR OF MATERIALS;

WEAR RESISTANCE;

EID: 84891522670     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2013.12.001     Document Type: Article

References (57)

1. K Holmberg, and A. Matthews Coatings tribology: properties, mechanisms, techniques and applications in surface engineering. Elsevier tribology and interface engineering series no. 56 2nd ed 2009 Elsevier Amsterdam, The Netherlands
2. JR. Davis Handbook of thermal spray technology 2004 ASM International Ohio, USA
3. Jeandin MA. Socratic approach to surface modification: the example of thermal spray. In: Proceedings of the 24th international conference on surface modification technologies, Dresden, Germany; 7-9.9; 2010. p. 3-20.
4. Ghabchi A. Wear resistant carbide-based thermal sprayed coatings: process, properties, mechanical degradation and wear. PhD thesis. Stony Brook University, New York, USA. VTT Science no. 29. Technical Research Centre of Finland, Espoo, Finland; 2013.
5. S Sampath, X Jiang, A Kulkarni, J Matejicek, DL Gilmore, and RA. Neiser Development of process maps for plasma spray: case study for molybdenum Mater Sci Eng A 348 2003 54 66 (Pubitemid 36339644)
6. A Vaidya, T Streibl, L Li, S Sampath, O Kovarik, and R. Greenlaw An integrated study of thermal spray process - structure - property correlations: a case study for plasma sprayed molybdenum coatings Mater Sci Eng A 403 2005 191 204 (3A) (Pubitemid 41110246)
7. Turunen E. Diagnostic tools for HVOF process optimization. PhD thesis. VTT Publication no. 583. VTT Technical Research Centre of Finland, Espoo, Finland; 2005.
8. E. Turunen Custom-made materials for demanding conditions 2011 VTT Impulse, VTT Technical Research Centre of Finland Espoo, Finland 26 31
9. S-P Hannula, E Turunen, J Koskinen, and O. Söderberg Processing of hybrid materials for components with improved lifetime Curr Appl Phys 9 2009 160 166
10. A Ghabchi, M Rombouts, K Holmberg, and R. Persoons Microstructure and failure modes during scratch testing of laser cladded WC-NiCrBSi coatings with spherical and angular carbides Tribol. - Mater. Surf. Interfaces 7 1 2013 13 20
11. GB. Olsson Designing a new material world Science 288 5468 1997 993 998
12. K Elalem, DY Li, MJ Anderson, and S. Chiovelli Modeling abrasive wear of homogeneous and heterogeneous materials GE Totten, DK Wills, D. Feldmann, Hydraulic failure analysis: fluids, components, and systems effects. ASTM STP 1339 2001 American Society for Testing Materials West Conshohocken, PA, USA
13. Gupta M, Nylen P. Design of low thermal conductivity thermal barrier coatings by finite element modelling. In: Sudarshan TS, Beyer E, Berger LM, editors. Surface modification technologies XXIV, proceedings 24th international conference on surface modification technologies, Dresden, Germany, 7-9.9; 2010. p. 353-65.
14. K Holmberg, and A. Laukkanen Wear models R. Bruce, Handbook on lubrication and tribology, vol. II: theory and design 2nd ed. 2012 CRC Press New York, USA 13 1-21
15. P. Wriggers Computational contact mechanics 2002 John Wiley & Sons Chichester, UK
16. TL. Andersson Fracture mechanics. Fundamentals and applications 3rd ed. 2005 CRC Press LLC London, UK
17. ZQ Gong, and K. Komvopoulos Mechanical and thermomechanical elastic-plastic contact analysis of layered media with pattered surfaces J Tribol Trans ASME 126 2004 9 17 (Pubitemid 38242293)
18. ZQ Gong, and K. Komvopoulos Surface cracking in elastic-plastic multi-layered media due to repeated sliding contact J Tribol Trans. ASME 126 2004 655 663 (Pubitemid 40015150)
19. K Holmberg, A Laukkanen, H Ronkainen, K Wallin, and S. Varjus A model for stresses, crack generation and fracture toughness calculation in scratched TiN-coated steel surfaces Wear 254 2003 278 291 (Pubitemid 36400543)
20. K Holmberg, A Laukkanen, H Ronkainen, K Wallin, S Varjus, and J. Koskinen Tribological contact analysis of a rigid ball sliding on a hard coated surface, part I: modelling stresses and strains Surf Coatings Technol 200 2006 3793 3809 (Pubitemid 43246062)
21. K Holmberg, A Laukkanen, H Ronkainen, K Wallin, S Varjus, and J. Koskinen Tribological contact analysis of a rigid ball sliding on a hard coated surface, part II: material deformations, influence of coating thickness and Young's modulus Surf Coatings Technol 200 2006 3810 3823 (Pubitemid 43246063)
22. K Holmberg, and A. Matthews Coatings tribology: properties, techniques and applications in surface engineering Elsevier tribology series vol. 28 1994 Elsevier Science B.V. The Netherlands 442
23. A Laukkanen, K Holmberg, J Koskinen, H Ronkainen, K Wallin, and S. Varjus Tribological contact analysis of a rigid ball sliding on a hard coated surface, part III: fracture toughness calculation and influence of residual stresses Surf Coatings Technol 200 2006 3824 3844 (Pubitemid 43250442)
24. A Laukkanen, K Holmberg, H Ronkainen, and K. Wallin Cohesive zone modeling of initiation and propagation of multiple cracks in hard thin surface coatings J ASTM Int 8 1 2010 1 21
25. R Colaco, and R. Vilar A model for the abrasive wear of metallic matrix particle-reinforced materials Wear 245 2003 625 634 (Pubitemid 36775154)
26. J Hu, DY Li, and R. Llewellyn Computational investigation of microstructural effects on abrasive wear of composite materials Wear 259 2005 6 17 (Pubitemid 41056983)
27. J Hu, DY Li, and R. Llewellyn Synergistic effects of microstructure and abrasion conditions on abrasive wear of composites - a modeling study Wear 263 2007 218 227 (Pubitemid 47487364)
28. M Ben Tkaya, S Mezilin, M El Mansori, and H. Zahouani On some tribological effects of graphite nodules in wear mechanism of SG cast iron: finite element and experimental analysis Wear 267 2009 535 539
29. JD Pearson, MA Zikry, and K. Wahl Computational design of thin-film nanocomposite coatings for optimized stress and velocity accommodation response Wear 267 2009 1137 1145
30. T Dick, and G. Cailletaud Fretting modelling with a crystal plasticity model of Ti6Al4V Comput Mater Sci 38 2006 113 125 (Pubitemid 44428151)
31. N Chawla, RS Sidhu, and VV. Ganesh Three-dimensional visualisation and microstructure-based modelling of deformation in particle-reinforced composites Acta Mater 54 2006 1541 1548 (Pubitemid 43277758)
32. Y Tan, J Longtin, S Sampath, and H. Wang Effect of starting microstructure on thermal properties of as-sprayed and thermally exposed plasma sprayed YSZ coatings J Am Ceram Soc 92 3 2009 710 716
33. M Zhang, DL McDowell, and RW. Neu Microstructure sensitivity of fretting fatigue based on computational crystal plasticity Tribol Int 42 2009 1286 1296
34. R Quey, PR Dawson, and F. Barbe Large-scale 3D random polycrystals for the finite element method: generation, meshing and remesching Comput Methods Appl Mech Eng 200 2011 1729 1745
35. Lagner SA, Fuller ER, Carter WC. OOF: an image-based finite-element analysis of material microstructures. Comput Sci Eng 2001 May/June: 15-23.
36. ACE Reid, SA Langer, RC Lua, VR Coffman, SI Haan, and RE. Garcia Image-based finite-element mesh construction for material microstructures Comput Mater Sci 43 2008 989 999
37. T Wiederkehr, B Kluserman, B Gies, H Müller, and B. Svendsen An image morphing method for 3D reconstruction and FE-analysis of pore networks in thermal spray coatings Comput Mater Sci 47 2010 881 889
38. W Österle, H Kloss, I Urban, and AI. Dmitriev Towards a better understanding of brake friction materials Wear 263 2007 1189 1201 (Pubitemid 47284284)
39. AL Mohd Tobi, PH Shipway, and SB. Leen Finite element modelling of brittle fracture of thick coatings under normal and tangential loading Tribol. Int. 58 2013 29 39
40. S Anwar, DA Axinte, and AA. Becker Finite element modelling of abrasive waterjet milled footprints J Mater Process Technol 213 2013 180 193
41. P Seleson, ML Parks, M Gunzburger, and RB. Lehoucq Peridynamics as an upscaling of molecular dynamics Multiscale Model Simul 8 1 2009 204 227
42. O Amsellem, K Madi, F Borit, D Jeulin, V Guipont, M Jeandin, E Boller, and F. Pauchet Two-dimensional (2D) and three-dimensional (3D) analyses of plasma-sprayed alumina microstructures for finite-element simulation of Young's modulus J Mater Sci 43 2008 4091 4098
43. S Beauvais, V Guipont, M Jeandin, D Jeulin, A Robisson, and R. Saenger Study of the porosity in plasma-sprayed alumina through an innovative three-dimensional simulation of the coating buildup Metall Mater Trans 39A 2008 2711 2724
44. K Holmberg, H Ronkainen, A Laukkanen, and K. Wallin Friction and wear of coated surfaces - scales, modelling and simulation of tribomechnisms Surf Coatings Technol 202 2007 1034 1049 (Pubitemid 350082271)
45. F Fritzen, T Böhlke, and E. Schnack Periodic three-dimensional mesh generation for crystalline aggregates based on Voroni tessellations Comput Mech 43 2009 701 713
46. W Wang, XJ Liu, and K. Liu FEM analysis on multibidy interaction process in three body friction geometry with rough surface Tribology 6 2012 59 66
47. OOF2. Finite element analysis of microstructures. National Institute of Standards and Technology. 〈http://www.ctcms.nist.gov/ oofâŒ; 4.1.2013.
48. JL Hay, and GM. Pharr Instrumented indentation testing ASM handbook 8 2000 232 243
49. T Suhonen, T Varis, E Turunen, X Liu, Y Ge, O Söderberg, and S-P. Hannula The effect of microstructure on mechanical properties of HVOF sprayed WC-CoCr composite coatings Tribologia Finnish J Tribol 28 2009 14 28
50. EN ISO 14923. Thermal spraying - characterization and testing of thermally sprayed coatings. European Standard, CEN Management Centre, Brussels, Belgium; 2003.
51. H Lan, and TA. Venkatesh Determination of the elastic and plastic properties of materials through instrumented indentation with reduced sensitivity Acta Mater 55 6 2007 2025 2041
52. EN 1071-3. Advanced technical ceramics - methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test. European Standard, CEN Management Centre, Brussels, Belgium; 2005.
53. Jennett NM, Owen-Jones S. The scratch test: calibration, verification and the use of a certified reference material. Measurement Good Practice Guide no. 54, National Physical Laboratory, Teddington, UK; 2002.
54. ASTM G65 Standard test method for measuring abrasion using the dry sand/rubber wheel apparatus 2010 ASTM International West Conshohocken, PA, USA
55. ASTM G99 Standard test method for wear testing with a pin-on-disk apparatus 2004 ASTM International West Conshohocken, PA, USA
56. A Ghabchi, T Varis, E Turunen, T Suhonen, X Liu, and SP. Hannula Behavior of HVOF WC-10Co4Cr coatings with different carbide size in fine and coarse particle abrasion J Therm Spray Technol 19 2010 368 377
57. Ghabchi A, Holmberg K, Varis T, Sampath S:, Damage mechanisms and cracking of thermal sprayed WC-CoCr coating under scratch test. Submitted to Wear; November 2013.