Topographical orientation effects on surface stresses influencing on wear in sliding DLC contacts, Part 2: Modelling and simulations

Wear

Volumn 388-389, Issue , 2017, Pages 18-28

  Laukkanen, A ^a   Holmberg, K ^a   Ronkainen, H ^a   Stachowiak, G ^b   Podsiadlo, P ^b   Wolski, M ^b   Gee, M ^c   Gachot, C ^d   Li, L ^e  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^b CURTIN UNIVERSITY   (Australia)

^c NATIONAL PHYSICAL LABORATORY   (United Kingdom)

^d SAARLAND UNIVERSITY   (Germany)

^e CITY UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

DLC; FEM modeling; Friction; Topography; Wear

Indexed keywords

ASPECT RATIO; CARBON; CRACKS; FINITE ELEMENT METHOD; FRACTAL DIMENSION; FRACTALS; FRICTION; MICROSTRUCTURAL EVOLUTION; NANOTECHNOLOGY; NUMERICAL METHODS; SURFACE DEFECTS; SURFACE PROPERTIES; SURFACE TOPOGRAPHY; TOPOGRAPHY; WEAR OF MATERIALS;

3-D SURFACE TOPOGRAPHY; FEM MODELING; FINITE ELEMENT METHOD MODEL (FEM); MICROSTRUCTURAL FEATURES; MODELLING AND SIMULATIONS; NUMERICAL CALCULATION; RESISTANCE TO CRACKING; TOPOGRAPHICAL FEATURES;

SURFACE ROUGHNESS;

EID: 85017119798     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2017.03.026     Document Type: Article

References (40)

1. P. Jost (ed), Lubrication (Tribology) education and research, A Report on the Present Position and Industry's Needs, Department of Education and Science, Her Majesty's Stationary Office, UK, 1966.
2. Holmberg, K., Andersson, P., Erdemir, A., Global energy consumption due to friction in passenger cars. Tribol. Int. 47 (2012), 221–234.
3. Holmberg, K., Siilasto, R., Laitinen, T., Andersson, P., Jäsberg, A., Global energy consumption due to friction in paper machines. Tribol. Int. 62 (2013), 58–77.
4. Holmberg, K., Andersson, P., Nylund, N.-O., Mäkelä, K., Erdemir, A., Global energy consumption due to friction in trucks and buses. Tribol. Int. 78 (2014), 94–114.
5. Erdemir, A., Holmberg, K., Energy consumption due to friction in motored vehicles and low-friction coatings to reduce it. Cha, S.C., Erdemir, A., (eds.) Coating Technology for Vehicle Applications, 2015, Springer, Heidelberg, Germany, 1–23.
6. Stachowiak, G.W., Batchelor, A.W., Engineering Tribology, 4th ed., 2013, Butterworth-Heinemann.
7. R. Bruce (ed.), Handbook on Lubrication and Tribology (2nd ed.), vols. I and II, CRC press, New York, USA, 2012.
8. Holmberg, K., Matthews, A., Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering, Elsevier Tribology and Interface Engineering Series No. 56. 2009, Elsevier, Amsterdam, The Netherlands.
9. Kubin, W.K., Pletz, M., Daves, W., Scheriau, S., A new roughness parameter to evaluate the near-surface deformation in dry rolling/sliding contact. Tribol. Int. 67 (2013), 132–139.
10. Wolski, M., Podsiadlo, P., Stachowiak, G.W., Directional fractal signature analysis of trabecular bone: evaluation of different methods to detect early osteoarthritis in knee radiographs. J. Eng. Med. Proc. IMechE Pt H 223 (2009), 211–236.
11. Wolski, M., Podsiadlo, P., Stachowiak, G.W., Applications of the variance orientation transform method to the multi-scale characterization of surface roughness and anisotropy. Tribol. Int. 43 (2010), 2203–2215.
12. Wolski, M., Podsiadlo, P., Stachowiak, G.W., Directional fractal signature analysis of self-structured surface textures. Tribol. Lett. 47:3 (2012), 323–340.
13. Podsiadlo, P.G., Stachowiak, G.W., Directional multiscale analysis and optimization for surface textures. Tribol. Lett. 49:1 (2013), 179–191.
14. Olsson, G.B., Designing a new material world. Science 288:5468 (1997), 993–998.
15. K. Holmberg, A. Laukkanen Wear models, in: R. Bruce (ed.), Handbook on Lubrication and Tribology, Vol II Theory and Design (2nd ed.), vol. 13, 2012, pp. 1–21, CRC Press New York.
16. Holmberg, K., Laukkanen, A., Ghabchi, A., Rombouts, M., Turunen, E., Waudby, R., Suhonen, T., Valtonen, K., Sarlin, E., Computational modelling based wear resistance analysis of thick composite coatings. Tribol. Int. 72 (2014), 13–30.
17. Holmberg, K., Laukkanen, A., Turunen, E., Laitinen, T., Wear resistance optimisation of composite coatings by computational microstructural modelling and simulation. Surf. Coat. Technol. 247 (2014), 1–13.
18. Holmberg, K., Laukkanen, A., Ronkainen, H., Waudby, R., Stachowiak, G., Wolski, M., Podsiadlo, P., Gee, M., Nunn, J., Gachot, C., Li, L., Topographical orientation effects on friction and wear in sliding DLC and steel contacts. Exp. Wear 330–331:part 1 (2015), 3–22.
19. Holmberg, K., Laukkanen, A., Ronkainen, H., Wallin, K., Varjus, S., A model for stresses, crack generation and fracture toughness calculation in scratched TiN-coated steel surfaces. Wear 254 (2003), 278–291.
20. H. Ronkainen, A. Laukkanen, K. Holmberg, Friction in a coated surface deformed by a sliding sphere, WoM 2007 – Wear of Materials 16th International Conference, 15-19.4. 2007, Montreal, Canada.
21. V. ProperTune, 23.6.2016. Available online: 〈 http://www.vttresearch.com/propertune〉.
22. Bowden, F.P., Tabor, D., The Friction and Lubrication of Solids. 1950, Oxford University Press, Oxford, UK.
23. Borodich, F.M., Pepelyshev, A., Savencu, O., Statistical approaches to description of rough engineering surfaces at nano and microscales. Tribology International 103 (2016), 197–207.
24. Kalin, M., Pogacnik, A., Etsion, I., Reaymaekers, B., Comparing surface topography parameters of rough surfaces obtained with spectral moments and deterministic methods. Tribology International 93 (2016), 137–141.
25. Greewood, J.A., Williamson, J.B.P., Contact of nominally flat surfaces. Proc. R. Soc. Lond. A 295 (1966), 300–319.
26. Halling, J., A contribution to the theory of mechanical wear. Wear 34 (1975), 239–249.
27. Halling, J., Toward a Mechanical Wear Equation, J. Lubrication Technology. Trans. ASME 105 (1983), 212–219.
28. Kalin, M., Pogacnik, A., Criteria and properties of the asperity peaks on 3D engineering surfaces. Wear 308 (2013), 95–104.
29. Kucharski, S., Starzynski, G., Study of contact of rough surfaces: Modeling and experiment. Wear 311 (2014), 167–179.
30. Reichert, S., Lorentz, B., Heldmaier, S., Albers, A., Wear simulation in non-lubricated and mixed lubricated contacts taking into account the microscale roughness. Tribology International 100 (2016), 272–279.
31. Westlund, V., Heinrichs, J., Olsson, M., Jacobson, S., Investigation of material transfer in sliding friction-topography or surface chemistry?. Tribology International 100 (2016), 213–223.
32. Gachot, C., Rosenkratnz, A., Reinert, L., Ramos-Moore, E., Souza, N., Muser, M.H., Mucklich, F., Dry friction between laser-patterned surfaces: Role of alignment, structural wavelength and surface chemistry. Tribology Letters 49 (2013), 193–202.
33. Prodanov, N., Gachot, C., Rosenkrantz, A., Mucklich, F., Muser, M.H., Contact mechanics of laser-textured surfaces – Correlating contact area and friction. Tribology Letters 50 (2013), 41–48.
34. Rosenkrantz, A., Reinert, L., Gachot, C., Mucklich, F., Alignement and wear debris effects between laser-patterned steel surfaces under dry sliding conditions. Wear 318 (2014), 49–61.
35. Cachot, C., Rosenkrantz, A., Hsu, S.M., Costa, H.L., A critical assessment of surface texturing for friction and wear improvement. Wear 372-373 (2017), 21–41.
36. Jiang, J., Arnell, R.D., The effect of substrate surface roughness on the wear of DLC coatings. Wear 239 (2000), 1–9.
37. Xiao, Y., Shi, W., Han, Z., Luo, J., Xu, L., Residual stress and its effect on failure in a DLC coating on a steel substrate with rough surfaces. Diamond and Related Materials 66 (2016), 23–35.
38. Etsion, I., Sher, E., Improving fuel efficiency with laser surface textured piston rings. Tribology International 42 (2009), 542–547.
39. Etsion, I., Modelling of surface texturing in hydrodynamic lubrication. Friction 1 (2013), 195–209.
40. Wu, C., Zhang, L., Li, S., Jiang, Z., Qu, P., A unified method for characterizing multiple lubrication regimes involving plastic deformation of surface asperities. Tribology International 100 (2016), 70–83.