Surface texturing

Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition

Volumn , Issue , 2012, Pages 53-1-53-16

  Etsion, Izhak ^a  

^a TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTRIC DISCHARGES; ION BEAMS; MAGNETIC FILM STORAGE; MAGNETIC STORAGE; MEMS; TRIBOLOGY; ULTRASONIC CUTTING;

COMMERCIAL APPLICATIONS; CRYSTALLINE STRUCTURE; ELECTRICAL DISCHARGE MACHINING; LASER SURFACE TEXTURING; MECHANICAL COMPONENTS; MICRO ELECTROMECHANICAL SYSTEM (MEMS); TRIBOLOGICAL APPLICATIONS; TRIBOLOGICAL PROPERTIES;

LASER BEAM MACHINING;

EID: 84976441993     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b12265     Document Type: Chapter

References (133)

1. Etsion, I. and Burstein, L., 1996, A model for mechanical seals with regular microsurface structure. Tribology Transactions, 39, 677-683.
2. Etsion, I., Halperin G., and Greenberg, Y., 1997, Increasing mechanical seal life with laser-textured seal faces. Proceedings of the 15th International Conference on Fluid Sealing, BHR Group, Maastricht, the Netherlands, pp. 3-11.
3. Geiger, M., Roth, S., and Becker, W., 1998, Influence of laser-produced microstructures on the tribological behavior of ceramics. Surface and Coatings Technology, 100-101, 17-22.
4. Geiger, M., Popp, U., and Engel, U., 2002, Eximer laser micro texturing of cold forging tool surface-Influence on tool life. Annals of the CIRP, 51, 231-234.
5. Etsion, I., 2005, State of the art in laser surface texturing. Journal of Tribology Transaction ASME, 127, 248-253.
6. Etsion, I., 2010, Laser surface texturing and applications, in: Recent Developments in Wear Prevention, Friction and Lubrication, Ed. G.K. Nikas, Research Signpost, Kerala, India, Chapter 3.
7. Etsion, I., 2010, Surface texturing for in-cylinder friction reduction, in: Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications and Future Trends, Ed. H. Rahnejat, Woodhead Publishing Ltd., New Delhi, India, Chapter 13.
8. Etsion, I., Kligerman, Y., and Halperin, G., 1999, Analytical and experimental investigation of laser-textured mechanical seal faces. Tribology Transactions, 42, 511-516.
9. Etsion, I., 2000, Improving tribological performance of mechanical seals by laser surface texturing. Proceedings of the 17th International Pump Users Symposium, Houston, TX, pp. 17-22.
10. Yu, X.Q., He, S., and Cai, R.L., 2002, Frictional characteristics of mechanical seals with a laser-textured seal face. Journal of Materials Processing Technology, 129, 463-466.
11. Kligerman, Y. and Etsion, I., 2001, Analysis of the hydrodynamic effects in a surface textured circumferential gas seal. Tribology Transactions, 44, 472-478.
12. McNikel, A. and Etsion, I., 2004, Near-contact laser surface textured dry gas seals. Journal of Tribology Transaction ASME, 126, 788-794.
13. Etsion, I. and Halperin, G., 2002, A laser surface textured hydrostatic mechanical seal. Tribology Transactions, 45, 430-434.
14. Ronen, A., Etsion, I., and Kligerman, Y., 2001, Friction-reducing surface texturing in reciprocating automotive components. Tribology Transactions, 44, 359-366.
15. Ryk, G., Kligerman, Y., and Etsion, I., 2002, Experimental investigation of laser surface texturing for reciprocating automotive components. Tribology Transactions, 45, 444-449.
16. Golloch, R., Merker, G.P., Kessen, U., and Brinkmann, S., 2004, Benefits of laser-structured cylinder liners for internal combustion engines. Proceedings of the 14th International Colloquium Tribology, January 13-15 Esslingen, Germany, pp. 321-328.
17. Etsion, I. and Sher, E., 2009, Improving fuel efficiency with laser surface textured piston rings. Tribology International, 42, 542-547.
18. Brizmer, V., Kligerman, Y., and Etsion, I., 2003, A laser surface textured parallel thrust bearing. Tribology Transactions, 46, 397-403.
19. Etsion, I., Halperin, G., Brizmer, V., and Kligerman, Y., 2004, Experimental investigation of laser surface textured parallel thrust bearings. Tribology Letters, 17, 295-300.
20. Hayashi H. and Taylor C.M., 1980, A determination of cavitation interfaces in fluid film bearings using finite element analysis. Journal Mechanical Engineering Science IMechE, 22, 277-285.
21. Elrod, H.G., 1981, A cavitation algorithm. Journal of Lubrication Technology Transaction ASME, 103, 350-354.
22. Gerald, C.F. and Wheately P.O., Applied Numerical Analysis, 5th edn., Addison-Wesley Publishing Co., New York, 1994.
23. Shinkarenko, A., Kligerman, Y., and Etsion, I., 2009, The effect of elastomer surface texturing in soft elasto-hydrodynamic lubrication. Tribology Letters, 36, 95-103.
24. Shinkarenko, A., Kligerman, Y., and Etsion, I., 2010, Theoretical analysis of surface textured elastomer sleeve in lubricated rotary sliding. Tribology Transactions, 53, 376-385.
25. Sahlin, F., Glavatskih, S.B., Almkvist, T., and Larsson, R., 2005, Two-dimensional CFD analysis of micro-patterned surfaces in hydrodynamic lubrication. Journal of Tribology Transaction ASME, 127, 96-102.
26. Feldman, Y., Kligerman, Y., Etsion, I., and Haber, S., 2006, The validity of the Reynolds equation in modeling hydrostatic effects in gas lubricated textured parallel surfaces. Journal of Tribology Transaction ASME, 128, 345-350.
27. Murthy, A.N., Etsion, I., and Talke, F.E., 2007, Analysis of textured air bearing sliders with rarefaction effects. Tribology Letters, 28, 251-261.
28. Mourier, L., Mazuyer, D., Lubrecht, A.A., and Donnet, C., 2006, Transient increase of film thickness in micro-textured EHL contacts. Tribology International, 39, 1745-1756.
29. Feldman, Y., Kligerman Y., and Etsion I., 2007, Stiffness and efficiency optimization of a hydrostatic laser surface textured gas seal. Journal of Tribology Transaction ASME, 127, 407-410.
30. Kligerman, Y., Etsion, I., and Shinkarenko, A., 2005, Improving tribological performance of piston rings by partial surface texturing. Journal of Tribology Transaction ASME, 127, 632-638.
31. Raeymaekers, B., Etsion, I., and Talke F.E., 2007, A model for magnetic tape/guide friction reduction by laser surface texturing. Tribology Letters, 28, 9-17.
32. Saka, A., Liou, M.J., and Suh, N.P., 1984, The role of tribology in electrical contact phenomena. Wear, 100, 77-105.
33. Tian, H., Saka, N., and Suh, N. P., 1989, Boundary lubrication studies on undulated titanium surfaces. Tribology Transactions, 32, 289-296.
34. Mosleh, M., Laube, S.J.P., and Suh, N.P., 1999, Friction of undulated surfaces coated with MoS2 by pulsed laser deposition. Tribology Transactions, 42, 495-502.
35. Varenberg, M., Halperin, G., and Etsion, I., 2002, Different aspects of the role of wear debris in fretting wear. Wear, 252, 902-910.
36. Volchok, A., Halperin, G., and Etsion, I., 2002, The effect of surface regular micro-topography on fretting fatigue life. Wear, 253, 509-515.
37. Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., and Etsion, I., 2004, The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic. Tribology Transactions, 47, 299-307.
38. Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., and Etsion, I., 2005, The effect of laser surface texturing on transition in lubrication regimes during unidirectional sliding contact. Tribology International, 38, 219-225.
39. Voevodin, A.A. and Zabinski, J.S., 2006, Laser surface texturing for adaptive solid lubrication. Wear, 261, 1285-1292.
40. Rapoport, L., Moshkovich, A., Perfilyev, V., Lapsker, I., Halperin, G., Itovich, Y., and Etsion, I., 2008, Friction and wear of MoS2 films on laser textured steel surfaces. Surface and Coatings Technology, 202, 3332-3340.
41. Rapoport, L., Moshkovich, A., Perfilyev, V., Gedanken, A., Koltypin, Yu., Sominski, E., Halperin, G., and Etsion, I., 2009, Wear life and adhesion of solid lubricant films on laser-textured steel surfaces. Wear, 267, 1203-1207.
42. Gualtieri, E., Menabue, C., Rettighieri, L., Borghi, A., and Valery, S., 2009, Surface micro-texturing for improving tribological behavior of steel. Metallurgia Italiana, 10, 49-53.
43. Sinanoglu, C., Nair, F., and Goksen, E., 2008, Effect of micro and macro pits of journal surface on radial pressure distribution of journal bearing. Indian Journal of Engineering and Materials Sciences, 15, 300-310.
44. Korzynski, M., 2009, Relief making on bearing sleeve surface by eccentric burnishing. Materials Processing, 209, 131-138.
45. Sinanoglu, C., 2009, Design of neural model for analysing journal bearings considering effects of transverse and longitudinal profile. Industrial Lubrication and Tribology, 61, 132-139.
46. Kango, S. and Sharma, R.K., 2010, Studies on the influence of surface texture on the performance of hydrodynamic journal bearing using power law model. International Journal of Surface Science and Engineering, 4, 505-524.
47. Pyoun, Y.S., Park, J.H., Suh, C.M., Cho, I., Lee, C.S., Park, I.G., Amanov, A., Gafurov, A., and Park, J., 2010, Tribological characteristics of radial journal bearings by ultrasonic nanocrystal surface modification technology. International Journal of Modern Physics B, 24, 3011-3016.
48. Cupillard, S., Cervantes, M.J., and Glavatskih, S., 2008, Pressure buildup mechanism in a textured inlet of a hydrodynamic contact. Journal of Tribology Transaction ASME, 130, 021701.
49. Li, H., Zheng, H., and Yoon, Y.C., 2009, Air bearing simulation for bit patterned media. Tribology Letters, 33, 199-204.
50. Cupillard, S., Glavatskih, S., and Cervantes, M.J., 2009, 3D thermohydrodynamic analysis of a textured slider. Tribology International, 42, 1487-1495.
51. Wan, Y. and Xiong, D.S., 2008, The effect of laser surface texturing on frictional performance of face seal. Journal of Materials Processing Technology, 197, 96-100.
52. Bai, S.X., Peng, X.D., Li, Y.F., and Sheng, S., 2010, A hydrodynamic laser surface-textured gas mechanical face seal. Tribology Letters, 38, 187-194.
53. Rahmani, R., Mirzaee, I., Shirvani, A., and Shirvani, H., 2010, An analytical approach for analysis and optimisation of slider bearings with infinite width parallel textures. Tribology International, 43, 1551-1565.
54. Tonder, K., 2010, Dimpled pivoted plane bearings: Modified coefficients. Tribology International, 43, 2303-2307.
55. Nakano, M., Miyake, K., Korenaga, A., Sasaki, S., and Ando, Y., 2009, Tribological properties of patterned NiFe-covered Si surfaces. Tribology Letters, 35, 133-139.
56. Ogawa, H., Sasaki, S., Korenaga, A., Miyake, K., Nakano, M., and Murakami, T., 2010, Effects of surface texture size on the tribological properties of slideways. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 224, 885-890.
57. Gangopadhyay, A. and McWatt, D.G., 2008, The effect of novel surface textures on tappet shims on valvetrain friction and wear. Tribology Transactions, 51, 221-230.
58. Caciu, C., Decenciere, E., and Jeulin, D., 2008, Numerical analysis of the consequences of roughness modifications in 3D hydrodynamic contacts. Tribology Transactions, 51, 483-493.
59. Caciu, C., Decenciere, E., and Jeulin, D., 2008, Parametric optimization of periodic textured surfaces for friction reduction in combustion engines. Tribology Transactions, 51, 533-541.
60. Shafiei, M. and Alpas, A.T., 2008, Fabrication of biotextured nanocrystalline nickel films for the reduction and control of friction. Materials Science and Engineering C-Biomimetic and Supramolecular Systems, 28, 1340-1346.
61. Lee, Y.C., Thompson, H.M., and Gaskell, P.H., 2009, Thin film flow over flexible membranes containing surface texturing: Bio-inspired solutions. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 223, 337-345.
62. Gao, L.M., Yang, P.R., Dymond, I., Fisher, J., and Zhongmin, J., 2010, Effect of surface texturing on the elastohydrodynamic lubrication analysis of metal-on-metal hip implants. Tribology International, 43, 1851-1860.
63. Man, H.C., Chiu, K.Y., and Guo, X., 2010, Laser surface micro-drilling and texturing of metals for improvement of adhesion joint strength. Applied Surface Science, 256, 3166-3169.
64. Kustandi, T.S., Choo, J.H., Low, H.Y., and Sinha, S.K., 2010, Texturing of UHMWPE surface via NIL for low friction and wear properties. Journal of Physics D-Applied Physics, 43, Art. 015301.
65. Gao, L.M., Meng, Q.E., Liu, F., Fisher, J., and Jin, Z.M., 2010, The effect of aspherical geometry and surface texturing on the elastohydrodynamic lubrication of metal-on-metal hip prostheses under physiological loading and motions. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 224, 2627-2636.
66. Zhao, W.J., Wang, L.P., and Xue, Q.J., 2010, Fabrication of low and high adhesion hydrophobic Au surfaces with micro/nano-biomimetic structures. Journal of Physical Chemistry C, 114, 11509-11514.
67. He, B., Chen, W., and Wang, Q.J., 2008, Surface texture effect on friction of a microtextured poly(dimethylsiloxane) (PDMS). Tribology Letters, 31, 187-197.
68. Vaverka, M., Vrbka, M., Poliscuk, R., Krupka, I., and Hartl, M., 2008, Numerical evaluation of pressure from experimentally measured film thickness in EHL point contact. Lubrication Science, 20, 47-59.
69. Krupka, I., Vrbka, M., and Hartl, M., 2008, Effect of surface texturing on mixed lubricated non-conformal contacts. Tribology International, 41, 1063-1073.
70. Mourier, L., Mazuyer, D., Lubrecht, A.A., Donnet, C., and Audouard, E., 2008, Action of a femtosecond laser generated micro-cavity passing through EHL contact. Wear, 264, 450-456.
71. Shinkarenko, A., Kligerman, Y., and Etsion, I., 2009, The validity of linear elasticity in analyzing surface texturing effect for elastohydrodynamic lubrication. Journal of Tribology Transaction ASME, 131, 021503.
72. Krupka, I., Poliscuk, R., and Hartl, M., 2009, Behavior of thin viscous boundary films in lubricated contacts between micro-textured surfaces. Tribology International, 42, 535-541.
73. Shinkarenko, A., Kligerman, Y., and Etsion, I., 2009, The effect of surface texturing in soft elasto-hydrodynamic lubrication. Tribology International, 42, 284-292.
74. Wang, X.L., Liu, W., Zhou, F., and Zhu, D., 2009, Preliminary investigation of the effect of dimple size on friction in line contacts. Tribology International, 42, 1118-1123.
75. Vrbka, M., Samanek, O., Sperka, P., Navrat, I., Krupka, I., and Hartl, M., 2010, Effect of surface texturing on rolling contact fatigue within mixed lubricated non-conformal rolling/sliding contacts. Tribology International, 43, 1457-1465.
76. Mourier, L., Mazuyer, D., Ninove, F.P., and Lubrecht, A.A., 2010, Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 224, 697-711.
77. Zhu, D., Nanbu, T., Ren, N., Yasuda, Y., and Wang, Q.J., 2010, Model-based virtual surface texturing for concentrated conformal-contact lubrication. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 224, 685-696.
78. Kanakasabai, V., Warren, K.H., and Stephens, L.S., 2010, Surface analysis of the elastomer in lip seals run against shafts manufactured with micro-cavity patterns. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 224, 723-736.
79. Wan, D.P., Chen, B.K., Shao, Y.M., Wang, S.L., and Hu, D.J., 2008, Microstructure and mechanical characteristics of laser coating-texturing alloying dimples. Applied Surface Science, 255, 3251-3256.
80. Yasumaru, N., Miazaki, K., and Kiuchi, J., 2008, Control of tribological properties of diamond-like carbon films with femtosecond-laser-induced nanostructuring. Applied Surface Science, 254, 2364-2368.
81. Wan, Y., Xiong, D.S., and Li, J.L., 2010, Cooperative effect of surface alloying and laser texturing on tribological performance of lubricated surfaces. Journal of Central South University of Technology, 17, 906-910.
82. Chouquet, C., Gavillet, J., Ducros, C., and Sanchette, F., 2010, Effect of DLC surface texturing on friction and wear during lubricated sliding. Materials Chemistry and Physics, 123, 367-371.
83. Qian, S.Q., Zhu, D., Qu, N.S., Li, H., and Yan, D., 2010, Generating micro-dimples array on the hard chrome-coated surface by modified through mask electrochemical micromachining. International Journal of Advanced Manufacturing Technology, 47, 1121-1127.
84. Lamraoui, A., Costil, S., Langlade, C., and Coddet, C., 2010, Laser surface texturing (LST) treatment before thermal spraying: A new process to improve the substrate-coating adherence. Surface and Coatings Technology, 205, s164-s167.
85. Basnyat, R., Luster, B., Muratore, C., Voevodin, A.A., Haasch, R., Zakeri, R., Kohli, P., and Aouadi, S.M., 2008, Surface texturing for adaptive solid lubrication. Surface and Coatings Technology, 203, 73-79.
86. Li, J.L., Xiong, D.S., Dai, J.H., Huang, Z., and Tyagi, R., 2010, Effect of surface laser texture on friction properties of nickel-based composite. Tribology International, 43, 1193-1199.
87. Li, J.L., Xiong, D.S., Wu, H.Y., Huang, Z., Dai, J., and Tyagi, R., 2010, Tribological properties of laser surface texturing and molybdenizing duplex-treated Ni-base alloy. Tribology Transactions, 53, 195-202.
88. Qiu, Y. and Khonsari, M.M., 2009, On the prediction of cavitation in dimples using a mass-conservative algorithm. Journal of Tribology Transaction ASME, 131, 041702.
89. Fesanghary, M. and Khonsari, M.M., 2010, On self-adaptive surface grooves. Tribology Transactions, 53, 871-880.
90. Dobrica, M.B., Fillon, M., Pascovici, M.D., and Cicone, T., 2010, Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 224, 737-750.
91. Han, J., Fang, L.A., Sun, J.P., and Ge, S., 2010, Hydrodynamic lubrication of microdimple textured surface using three-dimensional CFD. Tribology Transactions, 53, 860-870.
92. Cupillard, S., Glavatskih, S., and Cervantes, M.J., 2010, Inertia effects in textured hydrodynamic contacts. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 224, 751-756.
93. Harimkar, S.P. and Dahotre, N.B., 2009, Rapid surface microstructuring of porous alumina ceramic using continuous wave Nd: YAG laser. Materials Processing, 209, 4744-4749.
94. Zhou, Y.Q., Shao, T.M., and Yin, L., 2009, A method of micro laser surface texturing based on optical fiber focusing. Laser Physics, 19, 1061-1066.
95. Vilhena, L.M., Sedlacek, M., Podgornik, B., Vizintin, J., Babnik, A., and Mozina, J., 2009, Surface texturing by pulsed Nd: YAG laser. Tribology International, 42, 1496-1504.
96. Semaltianos, N.G., Perrie, W., Cheng, J., French, P., Sharp, M., Dearden, G., and Watkins, K.G., 2010, Picosecond laser ablation of nickel-based superalloy C263. Applied Physics A, 98, 345-355.
97. Huang, J., Beckemper, S., Gillner, A., and Wang, K., 2010, Tunable surface texturing by polarization-controlled three-beam interference. Journal of Micromechanics and Microengineering, 20, Art. No. 095004.
98. Shin, H.M., Choi, H.W., and Kim, S.D., 2010, Hybrid (LASER Plus CNC) process for lubricant groove on linear guides. International Journal of Advanced Manufacturing Technology, 46, 1001-1008.
99. Stepien, P., 2009, Regular surface texture generated by special grinding process. Journal of Manufacturing Science and Engineering Transaction ASME, 131, 011015.
100. Greco, A., Raphaelson, S., Ehmann, K., Wang, J.Q., and Lin, C., 2009, Surface texturing of tribological interfaces using the vibromechanical texturing method. Journal of Manufacturing Science and Engineering Transaction ASME, 131, 061005.
101. Denkena, B., Kastner, J., and Wang, B., 2010, Advanced microstructures and its production through cutting and grinding. CIRP Annals-Manufacturing Technology, 59, 67-72.
102. Yan, J., Zhang, Z., Kuriyagawa, T., and Gonda, H., 2010, Fabricating micro-structured surface by using single-crystalline diamond endmill. International Journal of Advanced Manufacturing Technology, 51, 957-964.
103. Greco, A., Martini, A., Liu, Y.C., Lin, C., and Wang, Q.J., 2010, Rolling contact fatigue performance of vibro-mechanical textured surfaces. Tribology Transactions, 53, 610-620.
104. Nair, R.P. and Zou, M., 2008, Surface-nano-texturing by aluminum-induced crystallization of amorphous silicon. Surface and Coatings Technology, 203, 675-679.
105. Cannon, A.H. and King, W.P., 2010, Microstructured metal molds fabricated via investment casting. Journal of Micromechanics and Microengineering, 20, 025025.
106. Parkansky, N., Beilis, I.I., Gindin, D., Alterkop, B., Boxman, R.L., Moshkovich, A., Perfilyev, V., Rapoport, L., and Rosenberg, Yu., 2010, Steel surface modification by pulsed air arc treatment. Surface and Coatings Technology, 205, 287-293.
107. Byun, J.W., Shin, H.S., Kwon, M.H., Kim, B.H., and Chu, C.N., 2010, Surface texturing by micro ECM for friction reduction. International Journal of Precision Engineering and Manufacturing, 11, 747-753.
108. Jucius, D., Guobiene, A., and Grigaliunas, V., 2010, Surface texturing of polytetrafluoroethylene by hot embossing. Applied Surface Science, 256, 2164-2169.
109. Zum Gahr, K.H., Wahl, R., and Wauthier, K., 2009, Experimental study of the effect of microtexturing on oil lubricated ceramic/steel friction pairs. Wear, 267, 1241-1251.
110. Galda, L., Pawlus, P., and Sep, J., 2009, Dimples shape and distribution effect on characteristics of stribeck curve. Tribology International, 42, 1505-1512.
111. Pawlus, P., Galda, L., Dzierwa, A., and Koszela, W., 2009, Abrasive wear resistance of textured steel rings. Wear, 267, 1873-1882.
112. Suh, M.S., Chae, Y.H., Kim, S.S., Hinoki, T., and Kohyama, A., 2010, Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction. Tribology International, 43, 1508-1517.
113. Predescu, A., Pascovici, M.D., Cicone, T., Popescu, C.S., Grigoriu, C., and Dragulinescu, D., 2010, Friction evaluation of lubricated laser-textured surfaces. Lubrication Science, 22, 431-442.
114. Yu, H.W., Wang, X.L., and Zhou, F., 2010, Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces. Tribology Letters, 37, 123-130.
115. Wang, J.D., Chen, H.S., Han, Z.L., and Chen, D., 2010, Investigation of the effect of milli-scale dimples on planar contact lubrication. Tribology Transactions, 53, 564-572.
116. Yan, D.S., Qu, N.S., Li, H.S., and Wang, X., 2010, Significance of dimple parameters on the friction of sliding surfaces investigated by orthogonal experiments. Tribology Transactions, 53, 703-712.
117. Meng, F.M., Zhou, R., Davis, T., Cao, J., Wang, Q.J., Hua, D., and Liu, J., 2010, Study on effect of dimples on friction of parallel surfaces under different sliding conditions. Applied Surface Science, 256, 2863-2875.
118. Galda, L., Dzierwa, A., Sep, J., and Pawlus, P., 2010, The effect of oil pockets shape and distribution on seizure resistance in lubricated sliding. Tribology Letters, 37, 301-311.
119. Koszela, W., Galda, L., Dzierwa, A., and Pawlus, P., 2010, The effect of surface texturing on seizure resistance of a steel-bronze assembly. Tribology International, 43, 1933-1942.
120. Miyake, K., Nakano, M., Korenaga, A., Mano, H., and Ando, Y., 2010, Tribological properties of nanostripe surface structures-A design concept for improving tribological properties. Journal of Physics D-Applied Physics, 43, Art. 465302.
121. Vincent, C., Monteil, G., Barriere, T., and Gelin, J.C., 2008, Control of the quality of laser surface texturing. Microsystem Technology, 14, 1553-1557.
122. Gualtieri, E., Borghi, A., Calabri, L., Pugno, N., and Valeri, S., 2009, Increasing nanohardness and reducing friction of nitride steel by laser surface texturing. Tribology International, 42, 699-705.
123. Shen, C., Huang, W., Ma, G.L., and Wang, X., 2009, A novel surface texture for magnetic fluid lubrication. Surface and Coatings Technology, 204, 433-439.
124. Zhang, H.S. and Komvopoulos, K., 2009, Scale-dependent nanomechanical behavior and anisotropic friction of nanotextured silicon surfaces. Journal of Materials Research, 24, 3038-3043.
125. Jackson, R.L., 2010, A scale dependent simulation of liquid lubricated textured surfaces. Journal of Tribology Transaction ASME, 132, 022001.
126. Luo, B.H., Shum, P.W., Zhou, Z.F., and Li, K.Y., 2010, Preparation of hydrophobic surface on steel by patterning using laser ablation process. Surface and Coatings Technology, 204, 1180-1185.
127. Marchetto, D., Rota, A., Calabri, L., Gazzadi, G.C., Menozzi, C., and Valeri, S., 2010, Hydrophobic effect of surface patterning on Si surface. Wear, 268, 488-492.
128. Zhao, W.J., Wang, L.P., and Xue, Q.J., 2010, Design and fabrication of nanopillar patterned Au textures for improving nanotribological performance. ACS Applied Materials and Interfaces, 2, 788-794.
129. de Kraker, A., van Ostayen, R.A.J., and Rixen, D.J., 2010, Development of a texture averaged Reynolds equation. Tribology International, 43, 2100-2109.
130. Zhao, W.J., Wang, L.P., and Xue, Q.J., 2010, Influence of micro/nano-textures and chemical modification on the nanotribological property of Au surface. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 366, 191-196
131. Salamon, D., Lammertink, R.G.H., and Wessling, M., 2010, Surface texturing inside ceramic macro/micro channels. Journal of the European Ceramic Society, 30, 1345-1350.
132. Marian, V.G., Predescu, A., and Pascovici, M.D., 2010, Theoretical analysis of an infinitely wide rigid cylinder rotating over a grooved surface in hydrodynamic conditions. Proceedings of the Institution Mechanical Engineers Part J-Journal of Engineering Tribology, 224, 757-763.
133. Kovalchenko, A., Ajayi, O., Erdemir, A., and Fenske, G., 2011, Friction and wear behavior of laser textured surface under lubricated initial point contact. Wear, 271, 1719-1725.