Global energy consumption due to friction and wear in the mining industry

Tribology International

Volumn 115, Issue , 2017, Pages 116-139

  Holmberg, Kenneth ^a   Kivikytö Reponen, Päivi ^a   Härkisaari, Pirita ^b   Valtonen, Kati ^b   Erdemir, Ali ^c  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^b TAMPERE UNIVERSITY OF TECHNOLOGY   (Finland)

^c ARGONNE NATIONAL LABORATORY   (United States)

Author keywords

Energy; Friction; Mining; Wear

Indexed keywords

BELT CONVEYORS; CARBON DIOXIDE; EMISSION CONTROL; EQUIPMENT; FRICTION; INDUSTRIAL ECONOMICS; LOSSES; LUBRICANTS; MINERAL INDUSTRY; MINERALS; MINING; MINING EQUIPMENT; TECHNOLOGICAL FORECASTING; TRIBOLOGY; UNDERGROUND EQUIPMENT; WEAR OF MATERIALS;

ADVANCED TECHNOLOGY; COEFFICIENTS OF FRICTION; COMMERCIAL TECHNOLOGY; ENERGY; HIGH PERFORMANCE SURFACES; LUBRICANT ADDITIVES; MECHANICAL ASSEMBLY; TOTAL ENERGY CONSUMPTION;

ENERGY UTILIZATION;

EID: 85019720563     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2017.05.010     Document Type: Article

References (234)

1. Alahelisten, A., Abrasion of hot flame-deposited diamond coatings. Wear 185 (1995), 213–224 1–2.
2. Al-Azizi, A., Eryilmaz, O., Erdemir, A., Kim, S.H., Effects of nanoscale surface texture and lubricant molecular structure on boundary lubrication in liquid. Langmuir 29 (2013), 13419–13426.
3. Albanese, T., McGagh, J., Future trends in mining. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration, USA, 21–38.
4. Aldrich, C., Consumption of steel grinding media in mills – a review. Miner Eng 49 (2013), 77–91.
5. Allebert, J., Jungedal, M., Waara, P., Wear on overlay welded HCWI vs. quenched and tempered low alloyed carbon steel evaluated with granite in a laboratory drum test machine. Wear 330–331 (2015), 364–370.
6. Amann, T., Kailer, A., Ultralow friction of mesogenic fluid mixtures in tribological reciprocating systems. Tribol Lett 37 (2010), 343–352.
7. Andersson, P., Koskinen, J., Varjus, S., Gerbig, Y., Haefke, H., Georgiou, S., et al. Microlubrication effect by laser-textured steel surfaces. Wear 262 (2007), 369–379.
8. Barros Bouchet, M., Martin, J.M., The future of boundary lubrication by carbon coatings and environmentally friendly additives. Luo, J., Meng, Y., Shao, T., Zhao, Q., (eds.) Advanced tribology, bejing, China, 2010, Tsinghua University Press, Springer, 598–599 Proceedings of CIST & ITS-IFToMM2008.
9. Batterham, R.J., Goodes, C., Energy and climate change – challenges and opportunities for the mining industry. 28th Int. Mineral processing Congress, 17–20.9.2007 Szklarska Poreba, Poland.
10. Berkhimer, E.N., Selection and sizing of excavation, loading, and hauling equipment. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 931–939.
11. Berns, H., Comparison of wear resistant MMC and white cast iron. Wear 254 (2003), 47–54 1–2.
12. Beste, U., On the nature of cemented carbide wear in rock drilling. PhD Thesis, Comprehensive Summaries of Uppsala Dissertations, 2004, Faculty of Science and Technology 964.
13. Bhushan, B., Principles and applications in tribology. 1999, John Wiley & Sons, New York, USA.
14. Blackwell, G.H., Estimation of large open pit haulage truck requirements. Cim Bull 92 (1999), 143–149 1028.
15. Blau, P., Friction science and technology – from concepts to applications. STLE. 2009, CRC Press, Taylor & Francis Group, New York, USA.
16. Board of govenors of the Federal Resreve System, Industrial production and capacity utilization – G.17. On line, 20.11.2015 Available http://www.federalreserve.gov/releases/g17/current.
17. Bohnet, E., Comparison of surface mining methods. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 405–413.
18. Bosman, R., Schipper, D.J., On the transition form mild to severe wear of lubricated, concentrated contacts: the IRG (OECD) transition diagram. Wear 269 (2010), 581–589.
19. Bosman, R., Schipper, D.J., Mild wear prediction of boundary-lubricated contacts. Tribol Lett 42 (2011), 169–178.
20. BP Statistcal Review of World Energy 2014, [Online] Available: http://www.bp.com/content/dam/bp-country/de_de/PDFs/brochures/BP-statistical-review-of-world-energy-2014-full-report.pdf 22.9.2016.
21. Brannon, C.A., Carlson, G.K., Casten, T.P., Block caving. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1437–1451.
22. Brown, I., Quarrying, Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1031–1046.
23. Brazilian Energy Balance 2014. Ministry of Mines and Energy, Rio de Janeiro, Brazil, 2014.
24. Bruce, R.W., (eds.) Hanbook of lubrication and tribology, vol. II theory and design, second ed., 2012, CRC Taylor & Frances, STLE, London, UK.
25. Busca, A., Bobancu, S., Duta, A., Mechanical properties of rubber – an overview. Bull Transilvania Univ Brasov, Ser I Eng Sci, 3, 2010, 52.
26. Busfield, J., Soft-rock equipment selection and sizing. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1157–1178.
27. Canter, N., BAM: antiwear and friction-reducing coating. Tribol Lubr Technol March, 2009, 14–15.
28. Carter, P., Selection process for hard-rock mining. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 357–376.
29. Carter, R.A., Maximizing mining tire life. WOMP E-Mining J E&MJ Eng Min J, 5, 2007 http://www.womp-int.com/story/2007vol5/story026.htm/4.5.2016.
30. Castro, R.M., Cavaler, L.C.C., Marques, F.M., Bristot, V.M., Rocha, A.S., Comparative of the tribological performance of hydraulic cylinders coated by the process of thermal spray HVOF and hard chorme plating. Tribol Industry 36 (2014), 79–89.
31. Cha, S.C., Erdemir, A., (eds.) Coating Technology for vehicle applications, 2015, Springer International Publishing, Switzerland.
32. Chattopadhyay, R., Surface wear, analysis, treatment, and prevention. 2001, ASM International, The Materials Information Society, Ohio, USA.
33. Chadwick, J., Diesel or electric? Mining magazine. August 1992, 92–98.
34. Chang, L., Friedrich, K., Composite materials., second ed. Totten, G., (eds.) Handbook of lubrication and tribology, vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 37.
35. Chen, H., Ren, J., Du, F., Zhao, F., Pan, J., Wang, C., et al. Friction and wear behaviour of in-situ transformed Cf/Al3O3 composite under different lubrication conditions. Wear 332–333 (2015), 918–925.
36. Choo, J.H., Forrest, A.K., Spikes, H.A., Influence of organic friction modifier on liquid slip: a new mechanism of organic friction modifier action. Tribol Lett 27 (2007), 239–244.
37. Clark, H.M., Llewellyn, R.J., Assessment of the erosion resistance of steels used for slurry handling and transport in mineral processing applications. Wear 250 (2001), 32–44.
38. Coal Age, Leveraging Lubrication, 2015. http://www.coalage.com/features/3232-leveraging-lubrication.html/10.12.2015.
39. Cohen, H.E., Energy usage in mineral processing. Trans Instn Min Metall, Sect C Mineral Process Extr Metall 92 (1983), C160–C164.
40. Cook, B.A., Harringa, J.L., Anderegg, J., Russell, A.M., Qu, J., Blau, P., et al. Analysis of wear mechanisms in low-friction AlMgB14-TiB2 coatings. Surf Coatings Technol 205 (2010), 2296–2301.
41. Cranta Design – CES Selector 2015, https://www.grantadesign.com/products/ces/1.9.2015.
42. Curry DC, Clermont B, Improving the efficiency of fine grinding – Developments in ceramic media technology. http://www.isamill.com/EN/Downloads/Downloaded%20Technical%20Papers/Improving_The_Efficiency_Of_Fine_Grinding-_Developments_.pdf/19.8.2016.
43. Cuthbert J, Gangopadhyay A, Elie L, Liu Z, Mcwatt D, Hock ED, Erdemir A, Engine Friction and Wear Performances with Polyalkylene Glycol Engine Oils, SAE Technical Paper 2016-01-2271.
44. Darestani Farahani, T., Bakhshandeh, G.R., Abtahi, M., Mechanical and viscoelastic properties of natural rubber/reclaimed rubber blends. Polym Bull 56 (2006), 495–505.
45. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration, USA.
46. Darling, P., Mining: ancient, modern and beyond. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration, USA, 3–9.
47. Davies, J.R., (eds.) Surface engineering for corrosion and wear resistance, 2001, ASM International, USA.
48. Davies, J.R., (eds.) Handbook of thermal spray technology, 2004, TTS ASM Thermal Spray Society, ASM International, USA.
49. Doll, G., Life-limiting wear of wind turbine bearings: root cause and solutions. 18th International Conference on wear of materials, Philadelphia, USA, 3–7 April 2011.
50. Doll, G.L., Matthews, A., Wear coatings and treatments., second ed. Totten, G., (eds.) Handbook of lubrication and tribology, vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 40.
51. Dommarco, R., Galarreta, I., Ortiz, H., David, P., Maglieri, G., The use of ductile iron for wheel loader bucket tips. Wear 249 (2001), 101–108.
52. Donnet, C., Erdemir, A., Historical developments and new trends in tribological and solid lubricant coatings. Surf Coatings Technol 180–181 (2004), 76–84.
53. Donnet, C., Erdemir, A., Tribology of diamondlike carbon films: fundamentals and applications. 2008, Springer, New York.
54. Durman, R.W., Progress in abrasion-resistant materials for use in comminution processes. Int. J Min. Process 22 (1988), 381–399 1–4.
55. Eitel, E., (eds.) Magnets seal it off. Machine design, 1.5.2005 2.12.2015 http://machinedesign.com/print/archive/magnets-seal-it.
56. Element Six, Superior performance drives productivity Mining & Road, Mining Tools. 2006, Element Six a De Beers Group Company, Germany, 1–28 Online available http://www.e6.com/wps/wcm/connect/6dde14f2-07b2-4165-bb18-cabbcd102011/E6_Combined+MiningTools_A428pp_English_awVIZ.pdf?MOD=AJPERES&CACHEID=6dde14f2-07b2-4165-bb18-cabbcd102011 19.5.2017.
57. Enomoto, Y., Yamamoto, T., New materials in automotive tribology. Tribol Lett 5 (1998), 13–24.
58. Erdakov, I.N., Tkachev, V.M., Novokreshchenov, V.V., Increase of wear resistance of steel plates for crushing stations. J Frict Wear 35:6 (2014), 739–745.
59. Erdemir, A., Engineered tribological interfaces for improved boundary lubrication. Tribol Int 38 (2005), 249–256.
60. Erdemir, A., Donnet, C., Tribology of diamondlike carbon films: current status and future prospects. Topical review. J Phys D Appl Phys 39 (2006), R311–R327.
61. Erdemir, A., Holmberg, K., Energy consumption due to friction in motored vehicles and low-friction coatings to reduce it. Sung, C.C., Erdemir, A., (eds.) Coating Technology for vehicle applications, 2015, Springer International Publishing, Switzerland, 1–23 Chapter 1.
62. Erdemir, A., Ramirez, G., Eryilmaz, O., Liao, Y., Narayanan, B., Sankaranarayanan, S., Carbon-based tribofilms from lubricating oils. Nature 536 (2016), 67–71.
63. Errath, R.A., Electric power distribution. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 683–703.
64. Etsion, I., Surface texturing., second ed. Totten, G., (eds.) Handbook of lubrication and tribology, vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 53.
65. Etsion, I., Sher, E., Improving fuel efficiency with laser surface textured piston rings. Tribol Int 42 (2009), 542–547.
66. Farley, J., Wrobel, L.C., Mao, K., Performance evaluation of multilayer thin film coatings under mixed rolling-sliding contact conditions. Wear 268 (2010), 269–276.
67. Finnie, I., Some reflection on the past and future of erosion. Wear 186–187 (1995), 1–10.
68. Flitney, R.K., Lip seals., second ed. Totten, G., (eds.) Handbook of lubrication and tribology, vol. 1, 2012, CRC Taylor & Francis, London, UK Chapter 20.
69. Flintoff, B., Kuehl, R. II, Classification by screens and cyclones. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1481–1506.
70. FIMECC, Demanding applications – DEMAPP, Breakthrough materials for demanding applications – from science to solutions., 2014, FIMECC Ltd, Tampere, Finland FIMECC Report No 3.
71. Fuerstenau, D., Abouzeid, A.A., The energy efficiency of ball milling in comminution. Int J Min. Process 67 (2002), 161–185.
72. Ge, X., Xia, Y., Shu, Z., Zhao, X., Conductive grease synthesized using nanometer ATO as an additive. Friction 3 (2015), 56–64 1.
73. Gerard, B., Application of thermal spraying in the automotive industry. Surf Coatings Technol 201 (2006), 2028–2031.
74. Giancola, D., (eds.) Canadian & american mines handbook 2007-2008. Business information group, 2007, BIG Mining Pub., Toronto, Canada.
75. Glaeser, W.A., Bruce, R.W., Wear materials., second ed. Totten, G., (eds.) Handbook of lubrication and tribology, vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 33.
76. Green, D.A., Selby, K., Mainwaring, R., Herrera, R., The effect of engine, axle and transmission lubricant and operating conditions on heavy duty diesel fuel economy. Part 1: Measurements. JSAE 20119224, 2011 SAE Paper 2011-01-2129:2024–31.
77. Gåhlin, R., Larsson, M., Hedenqvist, P., ME-C: H coatings in motor vehicles. Wear 249 (2001), 302–309.
78. Han, Z., Zhang, J., Ge, C., Li, W., Ren, L., Erosion resistance of bionic functional surfaces inspired from desert scorpions. Langmuir 28 (2012), 2914–2921.
79. Han, Z., Yin, W., Zhang, J., Niu, S., Ren, L., Active anti-erosion protection strategy in tamarisk (tamarix aphylla). Sci Rep, 2013, 1–7, 10.1038/srep03429.
80. Han, Z., Yin, W., Zhang, J., Jiang, J., Niu, S., Ren, L., Erosion-resistant surfaces inspired by Tamarisk. J Bionic Eng 10 (2013), 479–487.
81. Han, Z., Zhu, B., Yang, M., Niu, S., Song, H., Zhang, J., The effect of the micro-structure on the scorpion surface for improving the anti-erosion performance. Surf Coatings Technol, Jan. 2017 submitted.
82. Halin, A., Kerai, M., Ventilation requirement for “Electric” underground hard rock mines – a conceptual study. The Australian mine ventilation Conf, 1–3.7.2013, 215–220 Adelaide, Australia.
83. Hawk, J.A., Wilson, R.D., Tribology of earthmoving mining and minerals processing. Bhushan, B., (eds.) Modern tribology handbook, vols. 1–2, 2001, CRC Press, USA Chapter 35.
84. Heiniö, M., (eds.) Rock excavation handbook, 1999, Sandvik Tamrock Corp http://www.metal.ntua.gr/uploads/3290/254/Excavation_Engineering_Handbook_Tamrock.pdf/19.10.2015.
85. Herbst, J.A., A microscale look at tumbling mill scale-up using high fidelity simulation. Int. J Min Process 74S (2004), S299–S306.
86. Hodouin, D., Jämsä-Jounela, S.L., Carvalho, M.T., Bergh, L., State of the art and challenges in mineral processing control - Review. Control Eng Pract 9 (2001), 995–1005 9.
87. Holmberg, K., Laukkanen, A., Ronkainen, H., Wallin, K., Tribological analysis of fracture conditions in thin surface coatings by 3D FEM modelling and stress simulations. Tribol Int 38 (2005), 1035–1049.
88. Holmberg, K., Ronkainen, H., Laukkanen, A., Wallin, K., Erdemir, A., Eryilmaz, O., Tribological analysis of TiN and DLC coated contacts by 3D FEM modelling and stress simulation. Wear 264 (2007), 877–884.
89. Holmberg, K., Matthews, A., Coatings tribology – properties, mechanisms, techniques and applications in surface engineering. Elsevier Tribology and Interface Engineering Elsevier series, 2009, Elsevier, Amsterdam, The Netherlands No. 56.
90. Holmberg, K., Andersson, P., Erdemir, A., Global energy consumption due to friction in passenger cars. Tribol Int 47 (2012), 221–234.
91. Holmberg, K., Laukkanen, A., Wear models. Bruce, R., (eds.) Handbook on lubrication and tribology, vol. II: Theory and design, second ed., 2012, CRC Press, New York, USA, 1–21 Chapter 13.
92. Holmberg, K., Siilasto, R., Laitinen, T., Andersson, P., Jäsberg, A., Global energy consumption due to friction in paper machines. Tribol Int 62 (2013), 58–77.
93. Holmberg, K., Andersson, P., Nylund, P.O., Mäkelä, K., Erdemir, A., Global energy consumption due to friction in trucks and buses. Tribol Int 78 (2014), 94–114.
94. Holmberg, K., Erdemir, A., Global impact of friction on energy use in transportation and industry. 2nd Int. Brazilian Conf. On tribology – TriboBR 2014b, 3–5.11.2014, Foz do Iguacu, Brazil, 2014, ABM Brazilian Association for Metallurgy, Materials and Minerals, Sao Paolo, Brazil.
95. Holmberg, K., Laukkanen, A., Ghabchi, A., Rombouts, M., Turunen, E., Waudby, R., et al. Computational modelling based wear resistance analysis of thick composite coatings. Tribol Int 72 (2014), 13–30.
96. Holmberg, K., Laukkanen, A., Turunen, E., Laitinen, T., Wear resistance optimisation of composite coatings by computational microstructural modelling and simulation. Surf Coatings Technol 247 (2014), 1–13.
97. Hooper, J., Compressed air. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 705–716.
98. Humphrey, J.D., Wagner, J.D., Mechanical extraction, loading, and hauling. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 903–929.
99. Hämäläinen, E., Optimized crushing chamber. Results Min. Aggregates 1 (2013), 16–18.
100. Härkisaari, P., Wear and friction effects on energy consumption in the mining industry. MSc thesis, April 2015, Tampere University of Technology, Faculty of Engineering Sciences, Tampere, Finland, 77.
101. IBRAM Brazilian Mining Assosiation. Privat communication based on information available on web at http://www.revistaminerios.com.br/Edicoes/269/Outubro_2013.aspx, 19.10.2015.
102. IEA, Tracking industrial energy efficiency and CO2 emissions. Support of the G8 plan of action, energy Indicators, 2007, OECD/IEA, Paris, France.
103. IEA International Energy Agency, Redrawing the energy climate map. World Energy Outlook Special Report, 10.6, 2013, IEA, Paris, France.
104. IEA, Energy balances of non-OECD countries. 2013, International Energy Agency, Paris, France.
105. IEA International Energy Agency ”Key World Energy Statistics 2015”, 2016 [Online] Available: https://www.iea.org/publications/freepublications/publication/KeyWorld_Statistics_2015.pdf, 22.1.2016.
106. Industrial minerals directory, fifth ed., 2003, Metal Bulletin Books Ltd, USA.
107. Ishida, Y., Usami, H., Hoshino, Y., Effect of micro dimples on frictional properties in boundary lubrication condition. Proceedings of the world tribology Congress, Kyoto, Japan, 6–11.9.2009.
108. Ioannides, E., Jacobson, B., Dirty lubricants – reduced bearing life. Ball Bear J Special, 1989, 22–27.
109. Ioannides, E., Morales-Espejel, G.E., Lubrication of rolling element bearings. Totten, G., (eds.) Handbook of lubrication and tribology, second ed., vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 49.
110. Jacobson, S., Coatings and surface treatments: interactions with lubricants. Totten, G., (eds.) Handbook of lubrication and tribology, second ed., vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 41.
111. Jahanmir, S., Wear and lubrication of ceramics. Totten, G., (eds.) Handbook of lubrication and tribology, second ed., vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 36.
112. Jansen, M., The development of energy-optimized conveyor belts. World Min – Surf Undergr 60 (2008), 83–87 2.
113. Johansson, S., A surface engineering approach to reduction of frictional losses of heavy duty diesel engines (PhD Thesis). Dept. Materials and manufacturing, 2012, Chalmers University of Technology, Gothenburg, Sweden.
114. Jones, L.C., Low angle scouring erosion behaviour of elastomeric materials. Wear 271 (2011), 1411–1417.
115. Jungedal, M., Mild impact wear in a concrete mixer. An evaluation of wet abrasive wear. MSc Thesis, 9.11.2012, KTH Royal Institute of Technology, Material Science and Engineering, Stockholm, Sweden.
116. Kalin, M., Kogovsek, J., Remskar, M., Mechanisms and improvements in the friction and wear behaviour using MoS2 nanotubes as potential oil additives. Wear 280–281 (2012), 36–45.
117. Kalin, M., Kogovsek, J., Remskar, M., Nanoparticles as novel lubricating additives in a green, physically based lubrication technology for DLC coatings. Wear 303 (2013), 480–485.
118. Kano, M., DLC coating technology applied to sliding parts of automotive engine. New Diam Front Carbon Technol 16 (2006), 201–210.
119. Kartal, G., Timur, S., Eryilmaz, O.L., Erdemir, A., Influence of process duration on structure and chemistry of borided low carbon steel. Surf Coatings Technol 205 (2010), 1578–1583.
120. Kawatra, S.K., Fundamental principles of floatation. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1517–1531.
121. Keikkala, G., Kask, A., Dahl, J., Malyshev, V., Kotomin, V., Estimation of the potential for greenhouse gas emission in North-East Russia: a comparison of energy use in mining, mineral processing and residential heathing in Kiruna and Kirovsk-Apatity. Energy Policy 35 (2007), 1452–1463.
122. Kivikytö-Reponen, P., Ala-Kleme, S., Hellman, J., Liimatainen, J., Hannula, S.P., The correlation of material characteristics and wear in a laboratory scale cone crusher. Wear 267 (2009), 568–575 1–4.
123. Klingerman, Y., Etsion, I., Shinkarenko, A., Improving tribological performance of piston rings by partial surface texturing. Trans ASME, J Tribol 127 (2005), 632–638.
124. Komonen, K., The structure and effectiveness of industrial maintenance. 1998, PhD Thesis at Helsinki University of Technology, Acta Polytechnical Scandinavica, Mathematics, Computing and Management in Engineering Series No 93, The Finnish Academy of Technology, Espoo, Finland.
125. Komonen, K., Teollisuuden kunnossapidon rakenne ja tehokkuus (in Finnish), the structure and effectiveness of industrial maintenance., 1998, Helsinki University of Technology, Department of Industrial Management Report No 5/1998/Industrial Management.
126. Komonen, K., Maintenance key numbers – results from 2002 year survey/Kunnossapidon tunnuslukuja - Vuotta 2002 koskevan kyselyn tuloksia (in Finnish), vol. 12, 2003, Finnish Maintenance Society, Helsinki, Finland, 31.
127. Komonen, K., Introduction to operations and maintenance (O&M) management. Leiviskä, K., (eds.) Process and maintenance management. Papermaking science and technology book series, paper Engineer's Assosiation/Paperi ja Puu Oy, Helsinki, Finland, Nr 14, Chapter 9, 2009, 236–248.
128. Kotzalas, M.N., Rolling contact fatigue wear., second ed. Totten, G., (eds.) Handbook of lubrication and tribology, vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 9.
129. Kovalchenko, A., Ajayi, O.O., Erdemir, A., Fenske, G.R., Etsion, I., The effect of laser texturing of steel surface and speed-load parameters on lubrication regime transition from boundary to hydrodynamic. Tribol Trans 47 (2004), 299–307.
130. Kunttu, S., Komonen, K., Ahonen, T., Niemelä, M., Maintenance yearbook 2010/Kunnossapidon vuosikirja 2010 (in Finnish). 2010, Promaint KP-Media, Finnish Maintenance Society, Helsinki, Finland.
131. Lai, T.W., Face seals. Totten, G., (eds.) Handbook of lubrication and tribology, second ed., vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 56.
132. Lampe, T., Eisenberg, S., Rodriguez Cabeo, E., Plasma surface engineering in automotive industry – trends and future perspectives. Surf Coatings Technol 174–175 (2003), 1–7.
133. Leduc, G., Longer and heavier vehicles – an overview of technical aspects. 2009, Office for Official Publications of the European Communities, Joint Research Centre – Institute for Prospective Technological Studies, Luxembourg JRC 52392 EN.
134. Legendre, D., Zevenhoven, R., Assessing the energy efficiency of jaw crusher. Energy 74 (2014), 119–130.
135. Leiviskä, K., (eds.) Process and maintenance management. Papermaking science and technology book series, paper Engineer's Assosiation/Paperi ja Puu Oy, Helsinki, Finland, Nr 14, 2009, 379.
136. Levchenko, G.V., Svistelnik, O.Y., Plyuta, V.L., Sychkov, A.B., Nesterenko, A.M., Manufacturing technology for cast inserts of new wear resistant alloys for combined mill linings. Metallurgist, 56, 2013 9–10 Jan. 2013 (Russian Original 9–10 Sept.–Oct. 2012).
137. Li, J., Zhang, C., Ma, L., Liu, Y., Luo, J., Superlubricity achieved with mixtures of acids and glycerol. Langmuir 29 (2013), 271–275.
138. Li, X.B., Summers, D.A., Rupert, G., Santi, P., Experimental investigation on the breakage of hard rock by the PDC cutters with combined action modes. Tunn Undergr Space Technol 16 (2001), 107–114 2.
139. Lichter, J., Potapov, A.V., Peaker, R., The use of computational fluid dynamics and discrete element modeling to understand the effect of cell size and inflow rate on flotation bank retention time distribution and mechanism performance. Proc. 39th AGM of Canadian minerals processing, CIM, Canada, 2007, 473–496.
140. Lindroos, M., Valtonen, K., Laukkanen, A., Holmberg, K., Kuokkala, V.T., Kemppainen, A., Wear behavior and work hardening of high strength steels in high stress abrasion. Wear 322–323 (2015), 32–40.
141. Lindqvist, M., Wear in cone crusher chambers. PhD thesis, 2005, Dept. Applied Mechanics, Chalmers University of Technology, Göteborg, Sweden.
142. Linsler, D., Schlarb, T., Weingärtner, T., Scherge, M., Influence of subsurface microstructure on the running-in of an AlSi alloy. Wear 332–333 (2015), 926–931.
143. Liu, Y., Wang, H., Long, Z., Yang, J., Zhang, W., Enhancement on the transverse fracture strength of functional graded structure cemented carbides. J Mater Sci 40 (2005), 5525–5527 20.
144. LKAB, Annual and sustainability report 2013., 2013, LKAB, Vinter & KPMG, Luleå, Sweden.
145. Llewellyn, R.J., Yick, S.K., Dolman, K.F., Scouring erosion resistance of metallic materials used in slurry pump service. Wear 256 (2004), 592–599.
146. Lynch, A., (eds.) Comminution handbook. Australian Institute of mining and Metallurgy, spectrum series 21, Carlton Victoria, Australia, 2015.
147. MAC Mining Association of Canada, Benchmarking the energy consumption of Canadian underground bulk mines. 2005, Report prepared for the Mining Association of Canada and Natural Resources Canada, Ottawa, Canada.
148. MAC Mining Association of Canada, Benchmarking the energy consumption of Canadian open-pit mines. 2005, Report prepared for the Mining Association of Canada and Natural Resources Canada, Ottawa, Canada.
149. Martin, J.M., Ohmae, N., Nanolubricants. 2008, John Wiley & Sons Ltd., New York, USA.
150. Martin, J.M., Barros Bouchet, M.I., Sagawa, T., Green tribology: lubricant compliant superhard DLC coatings. Proceedings of the 4th world tribology Conference, Kyoto Japan, 9.2009, 6–11.
151. Martin, J.M., Barros Bouchet, M.I., Matta, C., Zhang, Q., Goddard, W.A. III, Okuda, S., et al. Gas-phase lubrication of a ta-C by glycerol and hydrogen peroxide: experimental and computer modelling. J Phys Chem C114 (2010), 5003–5011.
152. McCarthy, P.L., Hard-rock equipment selection and sizing. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1143–1155.
153. McCarthy, P.L., Dorricott, M.G., Dewatering underground operations. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 765–780.
154. McLellan, B.C., The minerals-energy nexus: past, present and future. Matsumoto, M., Masai, K., Fukushige, S., Kondoh, S., (eds.) Sustainability through innovation in product lifecycle design, 2013, EcoProduction, Springer, Japan, 619–631.
155. Meng, H.C., Ludema, K.C., Wear models and predictive equations: their form and content. Wear 181–183 (1995), 443–457.
156. Merlo, A.M., The contribution of surface engineering to the product performance in the automotive industry. Surf Coatings Technol 174–175 (2003), 21–26.
157. Metso Wear lining and sheeting, Hanbook. Version 1.2. 4.5.2016 http://www.metso.com/miningandconstruction/MaTobox7.nsf/DocsByID/C525FD49541A9098C2257C7E0043C04B/$File/2976_LiSh_Handbook_1403121_FINAL%20LR.pdf.
158. Metso Showroom, Optimized wears increase production at KMARuda iron ore mine. 30.4.2013 http://www.metso.com/showroom/mining/kmaruda/.
159. Minami, I., Ionic liquids in tribology. Molecules 14 (2009), 2286–2305.
160. Mining Journal online, Mining explained, an introduction to mining, or a place to refresh your understanding of the basic industry rules of thumb. 3.4.2014 http://www.mining-journal.com/knowledge/Mining-Explained.
161. Moreno, A.M., (eds.) Metal producers of the world 2002, 2002, Metal Bulletin Books Ltd, Worcester Park, UK.
162. Mosher, J., Crushing, milling, and grinding. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1461–1480.
163. Mukka, L., Mine ventilation at Kiruna. Min Eng 10 (2002), 2–6 10.
164. Nelson, M.G., Evaluation of mining methods and systems. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 341–348.
165. NMA National Mining Assosiation, The economic contributions of US mining (2011). A report prepared by the NMA National Mining Assosiation, Washington, USA, September 2013.
166. Nordell, K., A new era in overland conveyor belt design. E&Mj, April, 1999, 40–42.
167. Nordgren, S., García, J., Blomqvist, A., Trends in the P/M hard metal industry. Int J Refract Metals Hard Mater 48 (2015), 31–45.
168. Norgate, T., Haque, N., Energy and greenhouse gas impact of mining and mineral processing operations. J Clean Prod 18 (2010), 266–274.
169. NRC, Tires and passenger vehicle fuel economy – informing consumers, improving performance. Transportation Research Board, Special Report 286 National research Council of the national Academies, Washington D.C., USA, 2006.
170. Ojala, N., Valtonen, K., Heino, V., Kallio, M., Aaltonen, J., Siitonen, P., et al. Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels. Wear 317 (2014), 225–232.
171. Oksanen, V., Valtonen, K., Andersson, P., Vaajoki, A., Laukkanen, A., Holmberg, K., et al. Comparison of laboratory rolling-sliding wear tests with in-service wear of nodular cast iron rollers against wire ropes. Wear 340–341 (2015), 73–81.
172. Osara, K., Tiainen, T., Three-body impact wear study on conventional and new PM/+ HIPed wear resistant materials. Wear 250–251 (2001), 785–794.
173. Ovarock, Steels for mining and rock drilling applications from Ovako. 2008 Ovako.
174. Paalumäki, T., Lappalainen, P., Hakapää, A., (eds.) Mining and excavation technology/Kaivos- ja louhintateniikka (in Finnish), third ed., 2015, Finnish National Board of Education, Helsinki, Finland, 479.
175. Parent, L.L., Li, D.Y., Wear of hydrotransport lines in Athabasca oil sand. Wear 301 (2013), 477–482.
176. Parreira, J., Meech, J., Simulation of an open pit mine to study autonomous haulage trucks. Proc. Cim, 2012, Canadian Institute of Mining, Canada Convention, 6–9.5.2012, Edmonton, Canada.
177. Peppers, P.R., Dewatering surface mines. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 743–763.
178. Plinninger, R., Spaun, G., Thuro, K., Predicting tool wear in drill and blast. Tunnels & Tunnelling International Magazine, 2002, 1–5.
179. Podgornik, B., Vizintin, J., Tribological reactions between oil additives and DLC coatings for automotive applications. Surf Coatings Technol 200 (2005), 1982–1989.
180. Powell, M.S., Weerasekara, N.S., Cole, S., LaRoche, R.D., Favier, J., DEM modelling of liner evolution and its influence on grinding rate in ball mills. Miner Eng 24 (2011), 341–351.
181. Qu, J., Truhan, J.J., Dai, S., Luo, H., Blau, P.J., Ionic liquids with ammonium cations as lubricants or additives. Tribol Lett 22 (2006), 207–214.
182. Qu, J., Blau, P., Dai, S., Luo, H., Meyer, H.M. III, Ionic liquids as novel lubricants and additives for diesel engine applications. Tribol Lett 35 (2009), 181–189.
183. Qu, J., Blau, P., Dai, S., Luo, H., Meyer, H.M. III, Truhan, J.J., Tribological characteristics of aluminium alloys sliding against steel lubricated by ammonium and imidazolium liquids. Wear 267 (2009), 1226–1231.
184. Rabago, K.R., Lovins, A.B., Feiler, T.E., Energy and sustainable development in the mining and minerals industries. MMSD Min Min. Sustain Dev, Jan. 2001, 1–95 iied, World Business Council for Sustainable Development, London, U. K No 41.
185. Randolph, M., Current trends in mining. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration, USA, 11–19.
186. Ratia, V., Valtonen, K., Kemppainen, A., Kuokkala, V.T., High-Stress abrasion and impact-abrasion testing of wear resistant steels. Tribol Online 8 (2013), 152–161 2.
187. Ratia, V., Heino, V., Valtonen, K., Vippola, M., Kemppainen, A., Siitonen, P., et al. Effect of abrasive properties on the high-stress three-body abrasion of steels and hard metals. Finn J Tribol 32 (2014), 3–18 1.
188. Rattanasom, N., Prasertsri, S., Ruangritnumchai, T., Comparison of the mechanical properties at similar hardness level of natural rubber filled with various reinforcing-fillers. Polym Test 28 (2009), 8–12.
189. Reichl, C., Schatz, M., Zsak, G., World mining data - minerals production. International Organizing Committee for the world mining Congress, Vienna, Austria, vol. 31, 2016.
190. Rendon, J., Olsson, M., Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods. Wear 267 (2009), 2055–2061.
191. Richards, M., Hydraulic mining. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1049–1122.
192. Ronkainen, H., Elomaa, O., Varjus, S., Kilpi, L., Jaatinen, T., Koskinen, J., The influence of carbon based coatings and surface finish on the tribological performance in high-load contacts. Tribol Int 96 (2016), 402–409.
193. Rostami, J., Mechanical rock breaking. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 417–434.
194. Rostami, J., Hambley, D.F., Blasthole drilling. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 435–441.
195. Ryk, G., Etsion, I., Testing piston rings with partial laser surface texturing for friction reduction. Wear 261 (2006), 792–796.
196. Sare IR,Mardel, J.I., Hill, A.J., Wear-resistant metallic and elastomeric materials in the mining and mineral processing industries – an overview. Wear 250 (2001), 1–10.
197. Scharf, T.W., Metals. Totten, G., (eds.) Handbook of lubrication and tribology, second ed., vol. 2, 2012, CRC Taylor & Francis, London, UK Chapter 35.
198. Scherge, M., Linsler, D., Schlarb, T., The running-in corridor of lubricated metal-metal contacts. Wear 342–343 (2015), 60–64.
199. Scherge, M., Pöhlmann, K., Gerve, A., Wear measurement using radionuclide-technique (RNT). Wear 254 (2003), 801–817.
200. Scherge, M., Shakhvorostov, D., Pöhlmann, K., Fundamental wear mechanisms of metals. Wear 255 (2003), 395–400.
201. Scott, W., Mining industry., second ed. Totten, G., (eds.) Handbook of lubrication and tribology, vol. 1, 2006, CRC Taylor & Francis, London, UK Chapter 20.
202. Sethuramiah, A., Lubricated wear – science and technology. 2003, Elsevier Science, The Netherlands Elsevier Tribology Series Nr 42.
203. Shakhvorostov, D., Gleising, B., Büscher, R., Dudzinski, W., Fischer, A., Scherge, M., Microstructure of tribologically induced nanolayers produced at ultra-low wear rates. Wear 263 (2007), 1259–1265.
204. Siitonen, P., Kallio, M., New materials for wear parts in rock and mineral crushing. “Between a Rock and a Hard Place…” Seminar on heavy abrasive wear. 29.4.2009, Tampere University of Technology, Tampere, Finland.
205. Smith, J., The McCoy truck study, large vs small, mechanical vs electrical. E&MJ, February 1994, 24–28.
206. Somers, A.E., Howlett, P.C., MacFarlane, D.R., Forsyth, M., A review of ion liquid lubricants. Lubricants 1 (2013), 3–21.
207. Stachowiack, G.W., Batchelor, A.W., Engineering tribology. 2005, Elsevier, Amsterdam, The Netherlands.
208. Taylor, S., Fitzsimons, M., Hewett, C., Russell, J., Mill liners. Lynch, A., (eds.) Comminution handbook. Australian Institute of mining and Metallurgy, 2015, 125–144 Spectrum Series 21, Carlton Victoria, Australia.
209. The top ten deepest mines in the world, Mining-technology.com. 2.9.2016 http://www.mining-technology.com/features/feature-top-ten-deepest-mines-world-south-africa/.
210. Tiley, P., Hoisting systems. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 1295–1326.
211. Tolonen, S., Maintenance and plant services/Kunnossapito ja tehdaspalvelu (In Finnish). Paalumäki, T., Lappalainen, P., Hakapää, A., (eds.) Mining and excavation technology/Kaivos- ja louhintateniikka (in Finnish), third ed., 2015, Finnish National Board of Education, Helsinki, Finland, 365–387.
212. Toor, P., Franke, J., Powell, M., Bird, M., Waters, T., Designing liners for performance not life. Miner Eng 43–44 (2013), 22–28.
213. Handbook of lubrication and tribology., second ed. Totten, G., (eds.) Application and maintenance, vol. 1, 2006, CRC Taylor & Francis, London, UK.
214. Handbook of lubrication and tribology., second ed. Totten, G., (eds.) Theory and design, vol. 2, 2012, CRC Taylor & Francis, London, UK.
215. Tromans, D., Mineral comminution: energy efficiency considerations. Miner Eng 21 (2008), 613–620.
216. Tung, S.C., McMillan, M.L., Automotive tribology overview of current advances and challenges for the future. Tribol Int 37 (2004), 517–536.
217. UN United Nations, Framework convention on climate change. 2015 The Paris Agreement, FCCC/CP/2015/L.9/Rev.1, Paris, France.
218. US DOE, Mining industry of the future – energy and environmental profile of the U.S. mining industry. Dec. 2002, Prepared by BCS Inc., U.S. Dept. of Energy.
219. US DOE, Mining industry energy Bandwidth study. June 2007, Prepared by BCS Inc., U.S. Dept. of Energy Industrial Technologies Programme.
220. Utley, R.W., In-pit crushing. Darling, P., (eds.) SME mining engineering handbook, third ed., 2011, Society for Mining, Metallurgy and Exploration Inc., USA, 941–956.
221. Van Voorst, R., Polyglycols as base fluids for environmentally-friendly lubricants. J Synthetic Lubr 16 (2000), 313–322.
222. Vergne de la, J., Hard rock Miner's handbook. fifth ed., 2008, Stantec Consulting, Edmonton, Canada.
223. Vuorinen, E., Ojala, N., Heino, V., Rau, C., Gahm, C., Erosive and abrasive wear performance of carbide free bainitic steels – comparison of field and laboratory experiments. Tribol Int 98 (2016), 108–115.
224. Walker, C.I., Robbie, P., Comparison of some laboratory wear tests and field wear in slurry pumps. Wear 302 (2013), 1026–1034.
225. Wang, X., Yu, H., Huang, W., Surface texture design for different circumstances. Proceedings of the 1st International Brazilian Conference on Tribology, TriboBR 2010, Rio de Janeiro, Brazil, November 24–26 2010, p.97–107.
226. Wang, C., Li, X., Chang, Y., Han, S., Dong, H., Comparison of three-body impact wear behaviours for quenching-partitioning-tempering and quenching-tempering 20Si2Ni3 steels. Wear 362–363 (2016), 121–128.
227. Wicakasana, Y., Widodo, N.P., Kramadibrata, S., Wattimena, R.K., Sigalingging, J.W., Rizky, M., Nardono, Determining rolling resistance coefficient on Hauling road using dump-truck in open coal mine. International Symposium on earth science and technology, 6–7.11. 2011, Fukuoka, Japan, 2011, CINES Cooperative International-Network for Earth Science and Technology.
228. Wills, B.A., Napier-Munn, T., Will's Mineral Processing Technology – an introduction to the practical aspects of ore treatment and mineral recovery. seventh ed., 2006, Elsevier, Amsterdam, The Netherlands.
229. Woodman, C.A., Cutler, A.T., Tyre selection, use and operational issues to maximise tyre life. Otraco Int, 2002, 1–18 Web Publications https://www.otraco.com/custom/files/docs/otraco-web-publications-maximising-tyre-life-september-2002.pdf/19.5.2017.
230. Yahyaei, M., Powell, M.S., Toor, P., Tuxford, A., Limpus, A., Relining efficiency and liner design for improved plant performance. Miner Eng 83 (2015), 64–77.
231. Yue, M., Han-Guang, F., Shang-Lin, M., Yong-Ping, L., A study of microstructure and performance of cast Fe–8Cr–2B alloy. Mater Werkst 45 (2014), 912–919 10.
232. Zhang YB, A new type of energy conserved hydrodynamic journal bearing. Patent: CN201410563019.7 (2014).
233. Zhang, Y.B., An energy conserved hydrodynamic journal bearing by the boundary slippage technology. Recent Pat Mech Eng 9 (2016), 63–70 1.
234. Zhao, H., Burke, A., Miller, M., Analysis of class 8 truck technologies for their fuel savings and economics. Transp Res Part D 23 (2013), 55–63.