Environmental friendly cutting fluids and cooling techniques in machining: A review

Journal of Cleaner Production

Volumn 83, Issue , 2014, Pages 33-47

  Debnath, Sujan ^a   Reddy, Moola Mohan ^a   Yi, Qua Sok ^a  

^a CURTIN UNIVERSITY   (Malaysia)

Author keywords

Application methods; Cryogenic cooling; Cutting fluids; Dry cutting; MQL; Vegetable based cutting fluids

Indexed keywords

COOLING; CRYOGENICS; CUTTING TOOLS; ENVIRONMENTAL REGULATIONS; FRICTION; HEAT GENERATION; INJECTION MOLDING; LUBRICATION; MACHINING; MACHINING CENTERS; SURFACE ROUGHNESS;

APPLICATION METHOD; CRYOGENIC COOLING; DRY CUTTING; ENVIRONMENTAL CONCERNS; ENVIRONMENTAL-FRIENDLY; MINIMUM QUANTITY LUBRICATION; MQL; SEMI-FINISHED PRODUCTS;

CUTTING FLUIDS;

EID: 85027921507     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2014.07.071     Document Type: Review

References (76)

1. H.S. Abdalla, W. Baines, G. McIntyre, and C. Slade Development of novel sustainable neat-oil metal working fluids for stainless steel and titanium Alloy machining. Part 1. Formulation development Int. J. Adv. Manuf. Technol. 34 1-2 2007 21 33
2. Q.L. An, Y.C. Fu, and J.H. Xu Experimental study on turning of Tc9 titanium Alloy with cold water mist jet cooling Int. J. Mach. Tool. Manu. 51 6 2011 549 555
3. D. Babic, D.B. Murray, and A.A. Torrance Mist jet cooling of grinding processes Int. J. Mach. Tool. Manu. 45 10 2005 1171 1177
4. W. Belluco, and L.D. Chiffre Performance evaluation of vegetable-based oils in drilling austenitic stainless steel J. Mater. Process. Tech 148 2 2004 171 176
5. O. ÇakIr, M. KIyak, and E. Altan Comparison of gases applications to wet and dry cuttings in turning J. Mater. Process Tech. 153-154 2004 35 41
6. M.H. Cetin, B. Ozcelik, E. Kuram, and E. Demirbas Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of Aisi 304l by taguchi method J. Clean. Prod. 19 17-18 2011 2049 2056
7. 2 as cutting fluid in parting/grooving and threading austenitic stainless steel CIRP Ann. - Manuf. Technol. 56 1 2007 101 104
8. C. Courbon, D. Kramar, P. Krajnik, F. Pusavec, J. Rech, and J. Kopac Investigationofmachiningperformanceinhigh-pressurejetassistedturning of Inconel 718: an experimental study Int. J. Mach. Tool. Manu. 49 2009 1114 1125
9. J.P. Davim, V.N. Gaitonde, and S.R. Karnik Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by Ann models J. Mater. Process Tech. 205 1-3 2008 16 23
10. A. Devillez, G.L. Coz, S. Dominiak, and D. Dudzinski Dry machining of Inconel 718, workpiece surface integrity J. Mater. Process Tech. 211 2011 1590 1598
11. M. Dhananchezian, and M.P. Kumar Cryogenic turning of the Ti-6al-4v alloy with modified cutting tool inserts Cryogenics 51 1 2011 34 40
12. N.R. Dhar, M.W. Islam, S. Islam, and M.A.H. Mithu The influence of minimum quantity of lubrication (Mql) on cutting temperature, chip and dimensional accuracy in turning Aisi-1040 steel J. Mater. Process Tech. 171 1 2006 93 99
13. A.E. Diniz, and R. Micaroni Cutting conditions for finish turning process aiming: the use of dry cutting Int. J. Mach. Tool. Manu. 42 8 2002 899 904
14. U.S. Dixit, D.K. Sarma, and J.P. Davim Machining with minimal cutting fluid Environmentally Friendly Machining 2012 Springer US 9 17
15. J.J. Eppert, K.L. Gunter, and J.W. Sutherland Development of cutting fluid classification system using cluster analysis Tribol. Trans. 44 3 2001 375 382
16. E.O. Ezugwu, and J. Bonney Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools J. Mater. Process Tech. 153-154 2004 1045 1050
17. L. Foulds Cutting fluids Thomas Rustemeyer, Peter Elsner, Swen-Malte John, Howard I. Maibach, Kanerva's Occupational Dermatology 2012 Springer Berlin Heidelberg 715 725
18. D. Fratila Evaluation of near-dry machining effects on gear milling process efficiency J. Clean. Prod. 17 9 2009 839 845
19. V.N. Gaitonde, S.R. Karnik, and J.P. Davim Selection of optimal Mql and cutting conditions for enhancing machinability in turning of brass J. Mater. Process. Tech 204 1-3 2008 459 464
20. N.V. García, O. Gonzalo, and I. Bengoetxea Effect of cutting parameters in the surface residual stresses generated by turning in AISI 4340 steel Int. J. Mach. Tool. Manu. 61 2012 48 57
21. J. Gisip, R. Gazo, and H.A. Stewart Effects of cryogenic treatment and refrigerated air on tool when machining medium density fiberboard J. Mater. Process Tech. 209 2009 5117 5122
22. M.P. Groover Fundamentals of Modern Manufacturing second ed. 2002 John Wiley & Sons NJ, United State
23. P.L. Huang, J.,F. Li, J. Sun, and J. Zhou Study on performance in dry milling aeronautical titanium alloy thin-wall components with two types of tools J. Clean. Prod. 67 2014 258 264
24. M. Imran, P.T. Mativenga, A. Gholinia, and P.J. Withers Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys Int. J. Mach. Tool. Manu. 76 2014 49 60
25. A.D. Jayal, and A.K. Balaji Effects of cutting fluid application on tool wear in machining: interactions with tool-coatings and tool surface features Wear 267 9-10 2009 1723 1730
26. A.D. Jayal, A.K. Balaji, R. Sesek, A. Gaul, and D.R. Lillquist Machining performance and health effects of cutting fluid application in drilling of A390.0 cast aluminum Alloy J. Manuf. Process. 9 2 2007 137 146
27. J. John, M. Bhattacharya, and P.C. Raynor Emulsions containing vegetable oils for cutting fluid application Colloids Surf. Physicochem. Eng. Asp. 237 1-3 2004 141 150
28. Z.Z. Julie, P.N. Rao, and M. Eckman Experimental evaluation of a bio-based cutting fluid using multiple machining characteristics Int. J. Mod. Eng. 12 1-2 2012 35 44
29. L. Junyan, L. Huanpeng, H. Rongdi, and W. Yang The study on lubricating action with water vapor as coolant and lubricant in cutting ANSI 304 stainless steel Int. J. Mach. Tool. Manu. 50 2010 260 269
30. S. Kalpakjian, and S.R. Schmid Manufacturing Engineering and Technology sixth ed. 2010 Prentice Hall California, United States of America
31. F. Klocke, and A. Kuchle Manufacturing Processes 1 RWTH ed. 2011 Springer Berlin Heidelberg, Germany 219 236
32. P.V. Krishna, R.R. Srikant, and D.N. Rao Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel Int. J. Mach. Tools Manuf. 50 10 2010 911 916
33. E. Kuram, B. Ozcelik, E. Demirbas, and E. Şik Effects of the cutting fluid types and cutting parameters on surface roughness and thrust force World Congress on Engineering 2010 II: WCE 2010, June 30-July 2, 2010, London, U.K 2010 online: http://www.iaeng.org/publication/WCE2010/WCE2010-pp1312-1315.pdf
34. E. Kuram, B. Ozcelik, E. Demirbas, E. Şik, and I.N. Tansel Evaluation of new vegetable-based cutting fluids on thrust force and surface roughness in drilling of Aisi 304 using taguchi method Mater. Manuf. Process 26 9 2011 1136 1146
35. E. Kuram, B. Ozcelik, M. Bayramoglu, E. Demirbas, and B. Tolga Simsek Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments J. Clean. Prod. 42 2013 159 166
36. E. Kuram, B. Ozcelik, and E. Demirbas Environmentally friendly machining: vegetable based cutting fluids J. Paulo Davim, Green Manufacturing Processes and Systems 2013 Springer Berlin Heidelberg 23 47
37. D.I. Lalwani, N.K. Mehta, and P.K. Jain Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of Mdn250 steel J. Mater. Process Tech. 206 1-3 2008 167 179
38. S.A. Lawal, I.A. Choudhury, and Y. Nukman Application of vegetable oil-based metalworking fluids in machining ferrous metals - a review Int. J. Mach. Tool. Manu. 52 1 2012 1 12
39. N.M. Liu, K.T. Chiang, and C.M. Hung Modeling and analyzing the effects of air-cooled turning on the machinability of Ti-6Al-4V titanium alloy using the cold air gun coolant system Int. J. Adv. Manuf. Technol. 67 2013 1053 1066
40. L.N.D. López, C. Angulo, A. Lamikiz, and J.A. Sánchez Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling J. Mater. Process Tech. 172 2006 11 15
41. R.R. Malagi, and B.C. Rajesh Factors influencing cutting forces in turning and development of software Ti estimate cutting forces in turning Int. J. Eng. Innov. Technol. (IJEIT) 2 1 2012 37 43
42. D.J. Michalek, J. Sun, W.W.S. Hii, K.L. Gunter, and J.W. Sutherland Experimental and analytical efforts to characterize cutting fluid mist formation and behavior in machining Appl. Occup. Environ. Hyg. 2003 842 854
43. 3 engineering ceramic J. Clean. Prod. 66 2014 632 643
44. M. Nalbant, H. Gökkaya, and G. Sur Application of taguchi method in the optimization of cutting parameters for surface roughness in turning Mater. Des. 28 4 2007 1379 1385
45. C. Nath, S.G. Kapoor, A.K. Srivastava, and J. Iverson Study of droplet Spray behavior of an atomization-based cutting fluid Spray system for machining titanium J. Manuf. Sci. Eng. 136 2014 021004 021011
46. V.T.G. Naves, M.B.D. Silva, and F.J.D. Silva Evaluation of the effect of application of cutting fluid at high pressure on tool wear during turning operation of AISI 316 austenitic stainless steel Wear 302 1-2 2013 1201 1208
47. B. Ozcelik, E. Kuram, M.H. Cetin, and E. Demirbas Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of Aisi 304l Tribol. Int. 44 12 2011 1864 1871
48. A. Randegger-Vollrath Determination of chlorinated paraffins in cutting fluids and lubricants Fresenius J. Anal. Chem. 360 1 1998 62 68
49. R.V. Rao Cutting Fluid Selection for a Given Machining Application Decision Making in the Manufacturing Environment 2007 Springer London 97 114
50. K.A. Risbood, U.S. Dixit, and A.D. Sahasrabudhe Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process J. Mater. Process Tech. 132 1-3 2003 203 214
51. Y. Sahin, and A.R. Motorcu Surface roughness model for machining mild steel with coated carbide tool Mater. Design 26 4 2005 321 326
52. W.F. Sales, A.R. Machado, J. Bonney, and E.O. Ezugwu Evaluation of cutting fluids using scratch tests and turning process J. Braz. Soc. Mech. Sci. Eng. XXIX 4 2007 372 378
53. M.A. Salete, and J.F.G.D. Oliveira Vegetable based cutting fluid-an environmental alternative to grinding process 15th CIRP International Coference on Life Cycle Engineering. Sydney, N.S.W 2008 664 668
54. 2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption J. Clean. Prod. 67 2014 265 276
55. J.A. Schey Introduction to Manufacturing Processes third ed. 2000 McGraw-Hill Singapore
56. D.K. Sharma, and U.S. Dixit A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool J. Mater. Process Tech. 190 2007 160 172
57. J. Sharma, and B.S. Singh Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil J. Clean. Prod. 66 2014 619 623
58. V.S. Sharma, D. Manu, and N.M. Suri Cooling techniques for improved productivity in turning Int. J. Mach. Tool. Manu. 49 6 2009 435 453
59. Y.M. Shashidhara, and S.R. Jayaram Vegetable oils as a potential cutting Fluid - an evolution Tribol. Int. 43 5-6 2010 1073 1081
60. A. Shokrani, V. Dhokia, and S.T. Newman Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids Int. J. Mach. Tool. Manu. 57 0 2012 83 101
61. L.R. Silva, E.C.S. Corrêa, J.R. Brandão, and R.F. de Ávila Environmentally friendly manufacturing: behavior analysis of minimum quantity of lubricant - MQL in grinding process J. Clean. Prod. 2013 (in press)
62. R.B.D. Silva, Á.R. Machadoa, E.O. Ezugwub, J. Bonney, and W.F. Sales Tool life and wear mechanisms in high speed machining of Ti-6Al-4V alloy with PCD tools under various coolant pressures J. Mater. Process Tech. 213 2013 1459 1464
63. G.T. Smith Cutting Tool Technology, Industrial Handbook 2008 Springer London, UK 381 430
64. M. Soković, and K. Mijanović Ecological aspects of the cutting fluids and its influence on quantifiable parameters of the cutting processes J. Mater. Process Tech. 109 1-2 2001 181 189
65. S. Suda, H. Yokota, I. Inasaki, and T. Wakabayashi A synthetic ester as an optimal cutting fluid for minimal quantity lubrication machining CIRP Ann. Manuf. Technol 51 1 2002 95 98
66. S. Sun, M. Brandt, and M.S. Dargusch Machining Ti-6Al-4 V alloy with cryogenic compressed air cooling Int. J. Mach. Tool. Manu. 50 2010 933 942
67. Synthetic and Bio-Based Lubricants - Global Industry Size, Market Share, Trends, Analysis and Forecast, 2012-2018 2013 Transparency Market Research Albany, New York
68. T. Thepsonthi, M. Hamdi, and K. Mitsui Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills Int. J. Mach. Tool. Manu. 49 2 2009 156 162
69. H. Tschätsch, and R. Anette Cutting Fluids (Coolants and Lubricants) Applied Machining Technology 2009 Springer Berlin Heidelberg 349 352
70. A.S. Varadarajan, P.K. Philip, and B. Ramamoorthy Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning Int. J. Mach. Tool. Manu. 42 2002 193 200
71. J.M. Vieira, A.R. Machado, and E.O. Ezugwu Performance of cutting fluids during face milling of steels J. Mater. Process Tech. 116 2-3 2001 244 251
72. S.D.E. Wakil Physics of Metal Cutting Processes and Design for Manufacturing 2002 Waveland Press, Inc United States of America 331 357
73. Z.Y. Wang, K.P. Rajurkar, J. Fan, and G. Petrescu Cryogenic machining of tantalum J. Manuf. Process 4 2 2002 122 127
74. M.A. Xavior, and M. Adithan Determining the influence of cutting fluids on tool wear and surface roughness during turning of Aisi 304 austenitic stainless steel J. Mater. Process Tech. 209 2 2009 900 909
75. S.M. Yuan, L.T. Yan, W.D. Liu, and Q. Liu Effects of cooling air temperature on cryogenic machining of Ti-6Al-4V alloy J. Mater. Process Tech. 211 2011 356 362
76. S. Zhang, J.F. Li, and Y.W. Wang Tool life and cutting forces in end milling inconel 718 under dry and minimum quantity cooling lubrication cutting conditions J. Clean. Prod. 32 0 2012 81 87