Experimental study on turning of TC9 titanium alloy with cold water mist jet cooling

International Journal of Machine Tools and Manufacture

Volumn 51, Issue 6, 2011, Pages 549-555

  An, Q L ^a   Fu, Y C ^b   Xu, J H ^b  

^a SHANGHAI JIAO TONG UNIVERSITY   (China)

^b NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

Author keywords

Cold water mist jet; Cutting temperature; Titanium alloy; Turning

Indexed keywords

CHIP MORPHOLOGIES; COLD AIR; COLD WATERS; COMPREHENSIVE EVALUATION; COOLING EFFECTS; COOLING METHODS; CUTTING PROCESS; CUTTING TEMPERATURE; DIFFICULT-TO-CUT MATERIALS; ECO-FRIENDLY; EXPERIMENTAL STUDIES; FLOOD COOLING; MACHINED SURFACE QUALITY; TOOL LIFE; TOOL WEAR; TURNING PROCESS; TURNING TEST;

ALLOYS; COOLING; CORROSION RESISTANCE; CUTTING; HEAT RESISTANCE; MECHANICAL PROPERTIES; TITANIUM; TURNING;

TITANIUM ALLOYS;

EID: 79955036660     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2011.03.005     Document Type: Article

References (31)

1. C. Leyens, and M. Peters Titanium and Titanium Alloys: Fundamentals and Applications 2003 WILEY-VCH Verlag GmbH and Co. KGaA Weinheim
2. Shane Y. Hong, and Y.C. Ding Cooling approaches and cutting temperatures in cryogenic machining of Ti6Al4V International Journal of Machine Tools and Manufacture 41 10 2001 1417 1437
3. P.-J. Arrazola, A. Garay, L.-M. Iriarte, M. Armendia, S. Marya, and F. Le Maître Machinability of titanium alloys (Ti6Al4V and Ti555.3) Journal of Materials Processing Technology 209 2009 2223 2230
4. Y. Chen, B.Y. Jiang, Z.P. Zhou, and J.P. Zhan Burned titanium alloy aircraft structures Aerospace Materials and Technology 5 2007 75 77
5. G.D. Xu, and F.E. Wang Development and application on high-temperature ti-based alloys Chinese Journal of Rare Metals 32 2008 774 780
6. X. Li, J.L. Gaddis, and T. Wang Modeling of heat transfer in a mist/steam impinging jet Journal of Heat Transfer 123 6 2001 1086 1092 (Pubitemid 34034506)
7. J.Y. Liu, R.D. Han, and Y.F. Sun Research on experiments and action mechanism with water vapor as coolant and lubricant in green cutting International Journal of Machine Tools and Manufacture 45 2005 687 694
8. S.W. Kim, C.M. Lee, D.W. Lee, and J.S. Kim Evaluation of machinability by cutting environments in high-speed milling of difficult-to-cut materials Journal of Materials Processing Technology 111 2001 256 260 (Pubitemid 32335449)
9. H.Z. Choi, and S.W. Lee A comparison of the cooling effects of compressed cold air and coolant for cylindrical grinding with a CBN wheel Journal of Materials Processing Technology 111 2001 265 268 (Pubitemid 32335451)
10. Y. Su, N. He, L. Li, A. Iqbal, M.H. Xiao, S. Xu, and B.G. Qiu Refrigerated cooling air cutting of difficult-to-cut materials International Journal of Machine Tools and Manufacture 47 2007 927 933 (Pubitemid 46205136)
11. J. Liu, and Y. Kevin Chou On temperatures and tool wear in machining hypereutectic AlSi alloys with vortex-tube cooling International Journal of Machine Tools and Manufacture 47 2007 635 645 (Pubitemid 44908880)
12. S. Sun, M. Brandt, and M.S. Dargusch Machining Ti6Al4V alloy with cryogenic compressed air cooling International Journal of Machine Tools and Manufacture 50 2010 933 942
13. K.A. Venugopal, S. Paul, and A.B. Chattopadhyay Growth of tool wear in turning of Ti6Al4V alloy under cryogenic cooling Wear 262 2007 1071 1078 (Pubitemid 46496997)
14. F. Pusavec, P. Krajnik, and J. Kopac Transitioning to sustainable production - part I: application on machining technologies Journal of Cleaner Production 18 2010 174 184
15. F. Pusavec, D. Kramar, P. Krajnik, and J. Kopac Transitioning to sustainable production - part II: evaluation of sustainable machining technologies Journal of Cleaner Production 18 2010 1211 1221
16. H.J. Xu, Y.C. Fu, F.H. Sun, and X.P. Xu Fundamental studies on enhancing heat transfer in contact zone during high efficiency grinding Science in China (Series E) 45 2002 261 272
17. Emmanuel O. Ezugwu, John Bonney, Rosemar B.D. Silva, and C.O. Akir Surface integrity of finished turned Ti6Al4V alloy with PCD tools using conventional and high pressure coolant supplies International Journal of Machine Tools and Manufacture 47 2007 884 891 (Pubitemid 46205140)
18. F. Klocke, and G. Einesblatter Dry cutting Annals of the CIRP 46 2 1997 519 526
19. A. Attanasio, M. Gelfi, C. Giardini, and C. Remino Minimal quantity lubrication in turning: effect on tool wear Wear 260 3 2006 333 338 (Pubitemid 43208700)
20. Vishal S. Sharma, Manu Dogra, and N.M. Suri Cooling techniques for improved productivity in turning International Journal of Machine Tools and Manufacture 49 2009 435 453
21. P.W. Marksberry, and I.S. Jawahir A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing International Journal of Machine Tools and Manufacture 48 2008 878 886
22. M.H. Saidi, and M.S. Valipour Experimental modeling of vortex tube refrigerator Applied Thermal Engineering 23 2003 1971 1980
23. M.R. Schumack, J.B. Chung, and W.W. Schultz Analyses of fluid flow under a grinding wheel Transactions of the ASME 113 1991 190 197 (Pubitemid 21669747)
24. Ruey-Hung Chen, Louis C. Chow, and Jose E. Navedo Effects of spray characteristics on critical heat flux in subcooled water spray cooling International Journal of Heat and Mass Transfer 45 2002 4033 4043 (Pubitemid 34792339)
25. Tae Jo Ko, Sung Ho Park, and Hee Sool Kim Experimental verification of the mist generation mechanism in turning International Journal of Machine Tools and Manufacture 43 2003 115 120
26. T. Howes Assessment of the cooling and lubricative properties of grinding fluids Annals of the CIRP 39 1 1990 313 316
27. N.R. Dhar, S. Paul, and A.B. Chattopadhyay Role of cryogenic cooling on cutting temperature in turning steel Journal of Manufacturing Science and Engineering 124 2002 146 154 (Pubitemid 35202662)
28. Z.Q. Liu, and X. Ai Wear characteristics of cutting tools in high speed machining Tribology 22 2002 468 471
29. Z.L. Man, N. He, K. Wu, L. Li, and C.Y. Jiang Investigation on the wear of the milling cutter during milling ti-alloy with nitrogen media Mechanical Science and Technology 22 2003 996 998
30. M. Rahman, A. Senthil Kumar, Manzoor-Ul-Salam, and M.S. Ling Effect of chilled air on machining performance in end milling International Journal of Advanced Manufacturing Technology 21 2003 787 795
31. K. Weinert, I. Inasaki, J.W. Sutherland, and T. Wakabayashi Dry machining and minimum quantity lubrication Annals of the CIRP 53 2004 511 537 (Pubitemid 40118859)