Study of droplet spray behavior of an atomization-based cutting fluid spray system for machining titanium alloys

Journal of Manufacturing Science and Engineering

Volumn 136, Issue 2, 2014, Pages

  Nath, Chandra ^a   Kapoor, Shiv G ^a   Srivastava, Anil K ^b   Iverson, Jon ^b  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

^b Techsolve   (United States)

Author keywords

atomized droplets; droplet gas co flow; machining performance; spray parameters; titanium machining

Indexed keywords

ATOMIZATION; CUTTING FLUIDS; DROPS; GASES; SURFACE ROUGHNESS; TITANIUM ALLOYS; VELOCITY;

ATOMIZED DROPLETS; CO-FLOW; MACHINING PERFORMANCE; SPRAY PARAMETERS; TITANIUM MACHINING;

CUTTING TOOLS;

EID: 84891823979     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.4025504     Document Type: Article

References (30)

1. Ezugwu, E. O., and Wang, Z. M., 1997, "Titanium Alloys and Their Machinability-A Review," J. Mater. Process. Technol., 68, pp. 262-274. (Pubitemid 127393463)
2. Palanisamy, S., McDonald, S. D., and Dargusch, M. S., 2009, "Effects of Coolant Pressure on Chip Formation While Turning Ti6Al4V Alloy," Int. J. Mach. Tools Manuf., 49, pp. 739-743.
3. Hong, S. Y., and Ding, Y., 2001, "Cooling Approaches and Cutting Temperatures in Cryogenic Machining of Ti-6Al-4V," Int. J. Mach. Tools Manuf., 41, pp. 1417-1437.
4. Venugopal, K. A., Paul, S., and Chattopadhyay, A. B., 2007, "Tool Wear in Cryogenic Turning of Ti-6Al-4V Alloy," Cryogenics, 47, pp. 12-18. (Pubitemid 46341256)
5. Venugopal, K. A., Paul, S., and Chattopadhyay, A. B., 2007, "Growth of Tool Wear in Turning of Ti-6Al-4V Alloy Under Cryogenic Cooling," Wear, 262, pp. 1071-1078. (Pubitemid 46496997)
6. Ezugwu, E. O., Da Silva, R. B., Bonney, J., and Machado-A. R., 2005, "Evaluation of the Performance of CBN Tools When Turning Ti-6Al-4V Alloy With High Pressure Coolant Supplies," Int. J. Mach. Tools Manuf., 45, pp. 1009-1014. (Pubitemid 40339660)
7. Nandy, A. K., Gowrishankar, M. C., and Paul, S., 2009, "Some Studies on High-Pressure Cooling in Turning of Ti-6Al-4V," Int. J. Mach. Tools Manuf., 49, pp. 182-198.
8. Hong, S. Y., Maarkus, I., and Jeong, W.-C., 2001, "New Cooling Approach and Tool Life Improvement in Cryogenic Machining of Titanium Alloy Ti-6Al-4V," Int. J. Mach. Tools Manuf., 41, pp. 2245-2260. (Pubitemid 32785159)
9. Pusavec, F., Krajnik, P., and Kopac, J., 2010, "Transition to Sustainable Production-Part I: Application on Machining Technologies," J. Cleaner Prod., 18, pp. 174-184.
10. Nath, C., Kapoor, S. G., DeVor, R. E., Srivastava, A. K., and Iverson, J., 2012, "Design and Evaluation of an Atomization-Based Cutting Fluid Spray System in Turning of Titanium Alloy," J. Manuf. Process., 14, pp. 452-459.
11. Hoyne, A. C., Nath, C., and Kapoor, S. G., "Characterization of Fluid Film Produced by an Atomization-Based Cutting Fluid (ACF) Spray System During Machining," ASME J. Manuf. Sci. Eng., 135(5), p. 051006.
12. Rukosuyev, M., Goo, C. S., and Jun, M. B. G., 2010, "Understanding the Effects of System Parameters of an Ultrasonic Cutting Fluid Application System for Micromachining," J. Manuf. Process., 12, pp. 92-98.
13. Rukosuyev, M., Goo, C. S., Jun, M. B. G., and Park, S. S., 2010, "Design and Development of Cutting Fluid System Based on Ultrasonic atomization for Micro-Machining," Trans. NAMRI/SME, 38, pp. 97-104.
14. Jun, M. B. G., Joshi, S. S., DeVor, R. E., and Kapoor, S. G., 2008, "An Experimental Evaluation of an Atomization-Based Cutting Fluid Application System for Micromachining," ASME J. Manuf. Sci. Eng., 130, p. 031118.
15. Ghai, I., Wentz, J., DeVor, R. E., Kapoor, S. G., and Samuel. J., 2010, "Droplet Behavior on a Rotating Surface for Atomization-Based Cutting Fluid Application in Micromachining, ASME J. Manuf. Sci. Eng., 132, p. 011017.
16. Ghai, I., Samuel, J., DeVor, R. E., and Kapoor, S. G., 2013, "Analysis of Droplet Spreading on a Rotating Surface and the Prediction of Cooling and Lubrication Performance of an Atomization-Based Cutting Fluid System," ASME J. Manuf. Sci. Eng., 135(3), p. 031003.
17. Ricou, F. P., and Spalding, D. B., 1961, "Measurements of Entrainment by Axisymmetrical Turbulent Jets," J. Fluid Mech., 11, pp. 21-32.
18. Papadopoulos, G., and Pitts, W. M., 1998, "Scaling the Near-Field Centerline Mixing Behavior of Axisymmetric Turbulent Jets," AIAA J., 36, pp. 1635-1642. (Pubitemid 128550562)
19. Pitts, W. M., 1991, "Reynolds Number Effects on the Mixing Behavior of Axisymmetric Turbulent Jets," Exp. Fluids, 11, pp. 135-141. (Pubitemid 21695890)
20. Pitts, W. M., 1991, "Effects of Global Density Ratio on the Centerline Mixing Behavior of Axisymmetric Turbulent Jets," Exp. Fluids, 11, pp. 125-134. (Pubitemid 21695891)
21. Fellouah, H., Ball, C. G., and Pollard, A., 2009, "Reynolds Number Effects Within the Development Region of a Turbulent Round Free Jet," Int. J. Heat Mass Transfer, 52, pp. 3943-3954.
22. Parker, R., Rajagopalan, S., and Antonia, R. A., 2003, "Control of an Axisymmetric Jet Using a Passive Ring," Exp. Therm. Fluid Sci., 27, pp. 545-552. (Pubitemid 36499946)
23. Rothe, P. H., and Block, J. A., 1977, "Aerodynamic Behavior of Liquid Sprays," Int. J. Multiphase Flow, 3, pp. 263-272.
24. Lee, S. Y., and Tankin, R. S., 1984, "Study of Liquid Spray (Water) in a Non-Condensable Environment (Air)," Int. J. Heat Mass Transfer, 27, pp. 351-361. (Pubitemid 14546390)
25. Nath, C., Kapoor, S. G., Srivastava, A. K., and Iverson, J., 2012, "Effect of Fluid Concentration in Titanium Machining with an Atomization-Based Cutting Fluid (ACF) Spray System," J. Manuf. Process. (in press).
26. Bernoulli's Principle, http://en.wikipedia.org/wiki/Bernoulli-effect
27. Maczy-nski, J. F. J., 1961, "A Round Jet in an Ambient Co-Axial Stream," J. Fluid Mech., 13, pp. 597-608.
28. Hinze, O., 2004, Turbulence, McGraw-Hill, New York.
29. Jet flow, http://encyclopedia2.thefreedictionary.com/Jet\+Flow
30. Mi, J., Nobes, D. S., and Nathan, G. J., 2001, "Influence of Jet Exit Conditions on the Passive Scalar Field of an Axisymmetric Free Jet," J. Fluid Mech., 432, pp. 91-125. Available at: http://journals.cambridge.org/ abstract-S002211200 0003384 (Pubitemid 32292338)