Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel

International Journal of Machine Tools and Manufacture

Volumn 50, Issue 10, 2010, Pages 911-916

  Vamsi Krishna, P ^a   Srikant, R R ^a   Nageswara Rao, D ^b  

^a GITAM UNIVERSITY   (India)

^b ANDHRA UNIVERSITY   (India)

Author keywords

Boric acid; Coconut oil; Nanosolid lubricants; SAE oil; Turning

Indexed keywords

AISI 1040 STEEL; BORIC ACIDS; COCONUT OIL; CONVENTIONAL CUTTING; CUTTING SPEED; CUTTING ZONE; ECO-FRIENDLY; EXPERIMENTAL INVESTIGATIONS; MACHINED SURFACE; MANUFACTURING INDUSTRIES; NANOSOLID LUBRICANTS; SAE OIL; TOOL FLANK WEAR; WORK PIECES;

BORIDE COATINGS; CARBIDES; HEALTH RISKS; INORGANIC ACIDS; LUBRICATING OILS; LUBRICATION; MACHINING; SOLID LUBRICANTS; SURFACE ROUGHNESS; SUSPENSIONS (FLUIDS); VEGETABLE OILS;

CUTTING FLUIDS;

EID: 77955848301     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2010.06.001     Document Type: Article

References (30)

1. T.D. Howes, H.K. Toenshoff, and W. Heuer Environmental aspects of grinding fluids Annals of CIRP 40 2 1991 623 629
2. G. Byrne, and E. Scholta Environmentally clean machining processesa strategic approach Annals of CIRP 42 1 1993 471 474
3. P.S. Sreejith, and B.K.A. Ngoi Dry machining: machining of the future Journal of Material Processing Technology 101 3 2000 287 291
4. A.E. Diniz, and R. Micaroni Cutting conditions for finish turning process aiming: the use of dry cutting International Journal of Machine Tools and Manufacture 42 8 2002 899 904
5. Peter Panjan, Miha cekada, and Boris navinsek New experimental method for studying the racking behaviour of PVD multilayer coatings Surface and Coatings Technology 174175 2003 55 62
6. K. Itakura, M. Kuroda, H. Omokawa, H. Itani, K. Yamamoto, and Y. Ariura Wear mechanism of coated cemented carbide tool in coated tool in cutting of Inconel 718 super-heat resisting alloy International Journal of Japan's Society of Precision Engineering 33 4 1999 326 333
7. P.C. Jindal, A.T. Santhanam, Schleinkofer, and A.F. Shuster Performance of PVD TiN, TiCN and TiAlN coated cemented carbide tools in turning International Journal of Refractory Metals and Hard Materials 17 1999 163 170
8. S. Paul, N.R. Dhar, and A.B. Chatopadhyay Beneficial effects of cryogenic cooling over dry and wet machining on tool wear and surface finish in turning AISI 1060 steel Journal of Materials Processing Technology 116 2001 44 48
9. S. Paul, N.R. Dhar, and A.B. Chatopadhyay The influence of cryogenic cooling on tool wear, dimensional accuracy and surface finish in turning AISI 1040 and E4340C steels Wear 249 2002 932 942
10. S. Paul, N.R. Dhar, and A.B. Chatopadhyay Machining of AISI 4140 steel under cryogenic coolingtool wear, surface roughness and dimensional deviation Journal of Materials Processing Technology 123 2002 483 489
11. N.R. Dhar, and M. Kamruzzaman Cutting temperature, tool wear, surface finish and dimensional deviation in turning AISI 4037 steel under cryogenic condition International Journal of Machine Tools and Manufacture 47 2007 754 758
12. Mirghani I Ahmed, Ahmed F Ismail, Y.A. Abakr, and A.K.M. Nurul Amin Effectiveness of cryogenic machining with modified tool holder Journal of Materials Processing Technology 185 2007 91 96
13. M.M.A. Khan, and N.R. Dhar Performance evaluation of minimum quantity lubrication by vegetable oil in terms of cutting force, cutting zone temperature, tool wear, job dimension and surface finish in turning AISI-1060 steel Journal of Zhejiang UniversityScience A 7 11 2006 1790 1799
14. H. Bagchi, N.P. Mukharjee, and S.K. Basu Investigation of metal cutting using molybdenum disulphide as a cutting fluid Industrial Lubrication and Tribology 1972 239 243
15. G.S. Lathkar, S.K. Basu, Clean metal cutting process using solid lubricants, in: Proceedings of the 19th AIMTDR Conference, 2000, IIT Madras, Narosa Pub., pp. 1531.
16. A.S. Varadarajan, P.K. Philip, and B. Ramamoorthy Investigations on hard turning with minimal cutting fluid application and its comparison with dry and wet turning International Journal of Machine Tools and Manufacture 42 2 2002 193 200
17. S. Shaji, and V. Radhakrishnan An investigation of surface grinding using graphite as lubricant International Journal of Machine Tools and Manufacture 42 6 2002 733 740
18. S. Shaji, and V. Radhakrishnan Investigations on the application of solid lubricants in grinding Proceedings of the Institute of Mechanical Engineers B Journal of Engineering Manufacture 216 10 2002 1325 1343
19. A. Venugopal, and P.V. Rao Performance improvement of grinding of SiC using graphite as a solid lubricant Materials and Manufacturing processes 19 2 2004 177 186
20. 2 additions in dry cutting International Journal of Machine Tools and Manufacture 45 2005 1 7
21. N.Suresh Kumar Reddy, and P.V. Rao Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling International Journal of Machine Tools and Manufacture 46 2006 189 198
22. Dilbag Singh, and P.V. Rao Performance improvement of hard turning with solid lubricants International Journal of Advanced Manufacturing Technology 32 2007 170 177
23. P. Vamsi Krishna, and D. Nageswara Rao The influence of solid lubricant particle size on machining parameters in Turning International Journal of Machine Tools and Manufacture 48 1 2008 107 111
24. P. Vamsi Krishna, and D. Nageswara Rao Performance evaluation of solid lubricants in terms of machining parameters in turning International Journal of Machine Tools and Manufacture 48 10 2008 1131 1137
25. I.S., Ioan, C., Camelia, C., George, On the future of biodegradable vegetable lubricants used for industrial trybosystems, The Annals of University "Dunarea De Jos" of Galati Fascicle, 8, 2002, pp. 12214590.
26. W. Belluco, and L. De Chiffre Surface integrity and part accuracy in reaming and tapping stainless steel with new vegetable based cutting oils Tribology International 35 2002 865 870
27. S. Skerlos, K. Hayes, Vegetable Based Cutting FluidA New Dimension in Research 〈 http://www.engn.umich.edu/alumni/engineer/03FW/research/ holography/index.html 〉.
28. N.H. Jayadas, and K. Prabhakaran Nair Coconut oil as base oil for industrial lubricantsevaluation and modification of thermal, oxidative and low temperature properties Tribology International 39 2006 873 878
29. Devdatta P. Kulkarni, Praveen K. Namburu, and Debendra K. Das Comparison of heat transfer rates of different nanofluids on the basis of the Mouromtseff number Electronics Cooling 13 3 2007 28 32
30. S. William, and Janna Engineering Heat Transfer 2nd ed. 2000 CRC Press LLC Boca Raton, Florida