Cooling techniques for improved productivity in turning

International Journal of Machine Tools and Manufacture

Volumn 49, Issue 6, 2009, Pages 435-453

  Sharma, Vishal S ^a   Dogra, Manu ^b   Suri, N M ^c  

^a DR B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^b PANJAB UNIVERSITY   (India)

^c PEC UNIVERSITY OF TECHNOLOGY   (India)

Author keywords

Compressed air cooling; Cryogenic cooling; HPC; MQL; Solid coolants lubricants

Indexed keywords

AIR LUBRICATION; CAISSONS; COLD STORAGE; COMPRESSED AIR; CRYOGENICS; CUTTING TOOLS; DISTRICT HEATING; FRICTION; HEAT GENERATION; HEAT RESISTANCE; MACHINE TOOLS; MARINE ENGINES; PNEUMATICS; PRESSURE VESSELS; TURNING; WEAR RESISTANCE;

AUTOMOTIVE APPLICATIONS; CHEMICAL DEGRADATIONS; COOLING TECHNIQUES; CRYOGENIC COOLING; CUTTING ZONES; DIFFICULT-TO-CUT MATERIALS; ELEVATED TEMPERATURES; HIGH PRESSURE COOLANTS; HIGH STRENGTHS; HPC; MACHINE CONTROLS; MINIMUM QUANTITY LUBRICATIONS; MQL; NEAR-DRY MACHINING; SURFACE FINISHES; TOOL LIVES; TURNING OPERATIONS; TURNING PROCESS;

COOLING;

EID: 61449138608     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2008.12.010     Document Type: Review

References (103)

1. Childs T.H.C., Maekawa K., Obikawa T., and Yamane Y. Metal Machining Theory and Applications (2001), Butterworth Heinemann, Oxford
2. Trent E.M., and Wright P.K. Metal Cutting. fourth ed (2000), Butterworth Heinemann, Oxford
3. Ueda T., Hosokawa A., and Yamada K. Effect of oil mist on tool temperature in cutting. Journal of Manufacturing Science and Engineering 128 (2006) 130-135
4. Boothroyd G., and Knight W.A. Fundamentals of Machining and Machine Tools. third ed (2005), CRC Taylor & Francis
5. Zhao H., Barber G.C., and Zou Q. A study of flank wear in orthogonal cutting with internal cooling. Wear 253 (2002) 957-962
6. Rahmath Zareena A., Rahman M., and Wong Y.S. Binderless CBN tools, a breakthrough for machining titanium alloys. Journal of Manufacturing Science and Engineering 127 (2005) 277-279
7. Barrow G. A review of experimental and theoretical techniques for assessing cutting temperatures. Annals of the CIRP 22 2 (1973) 203-211
8. Silva M.B.Da., and Wallbank J. Cutting temperature: prediction and measurement methods-a review. Journal of Material Processing Technology 88 (1999) 195-202
9. Shaw M.C. Energy conversion in cutting and grinding. Annals of the CIRP 45 1 (1996) 101-104
10. Stephenson D.A., Barone M.R., and Dargush G.H. Thermal expansion of the workpiece in turning. ASME Journal of Engineering for Industry 117 (1995) 542-550
11. Tuholski R.J. Don't forget the cutting fluid. Journal of Industrial Technology Fall (1993) 2-5
12. K.L. Yerkes, J. Dorian, Micro-cooler for chip-level temperature control, in: Aero System Power Conference, Arizona, 1401-1404, 1999, pp. 1-9.
13. Taylor F.W. On the art of cutting metals. Transactions of the ASME 28 (1907) 31-58
14. Liu J., and Chou Y.K. On temperatures and tool wear in machining hypereutectic Al-Si alloys with vortex-tube cooling. International Journal of Machine Tools & Manufacture 47 (2007) 635-645
15. Hong Y.S. Economical and ecological cryogenic machining. Journal of Manufacturing Science and Engineering 12 (2001) 331-338
16. Klocke F., and Eisenblaetter G. Dry cutting. CIRP Annals-Manufacturing Technology 46 2 (1997) 519-526
17. J.D. Silliman, R. Perich, Cutting and grinding fluids: selection and application, second ed., Society of Manufacturing Engineers, Dearbornr, Michigan, 1992, 216pp.
18. Bienkowski K. Coolants & lubricants-staying pure. Manufacturing Engineering March (1993) 55-61
19. Chiffre L.De., and Belluco W. Investigation of cutting fluid performance using different machining operations. Lubrication Engineering 58 10 (2002) 22-29
20. Baradie M.A.EI. Cutting fluids, Part I. Characterisation. Journal of Materials Processing Technology 56 (1996) 787-797
21. Jen T.C., Gutierrez G., Eapen S., Barber G., Zhao H., Szuba P.S., Lambataille J., and Manjunathaiah J. Investigation of heat pipe cooling in drilling application, Part 1: preliminary numerical analysis and verification. International Journal of Machine Tools & Manufacture 43 (2002) 634-652
22. Evans C. Cryogenic diamond turning of stainless steel. Annals of the CIRP 40 1 (1991) 571-575
23. Hong S.Y., Ding Y., and Jeong W.-C. Friction and cutting forces in cryogenic machining of Ti-6Al-4V. International Journal of Machine Tools & Manufacture 41 (2001) 2271-2285
24. Wang Z.Y., and Rajurkar K.P. Cryogenic machining of hard-to-cut materials. Wear 239 (2000) 168-175
25. S.Y. Hong, Economical cryogenic machining high speed cutting of difficult-to-machine materials, in: Proceedings of First International Conference on Manufacturing Technology, Hong Kong, 27-29 December 1991.
26. Khan A.A., and Mirghani A.I. Improving tool life using cryogenic cooling. Journal of Materials Processing Technology 196 Issues 1-3 (2008) 149-154
27. Dhar N.R., Paul S., and Chattopadhyay A.B. Role of cryogenic cooling on cutting temperature in turning steel. Transactions of the ASME 124 (2002) 146-154
28. S. Hong, Conclusion report, Phase I, economical cryogenic machining for high speed cutting of difficult-to-machine materials, Technical Project Report to EMTEC, 1993.
29. Venugopal K.A., Paul S., and Chattopadhyay A.B. Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling. Wear 262 (2007) 1071-1078
30. Wang Z.Y., Rajurkar K.P., and Murugappan M. Wear of CBN tools in turning of silicon nitride with cryogenic cooling. International Journal of Machine Tools & Manufacture 37 3 (1997) 319-326
31. Mirghani A.I., Ismail A.F., Abakr Y.A., and Nurul A.A.K.M. Effectiveness of cryogenic machining with modified tool holder. Journal of Materials Processing Technology 185 (2007) 91-96
32. Dhar N.R., and Kamruzzaman M. Cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI-4037 steel under cryogenic condition. International Journal of Machine Tools & Manufacture 47 (2007) 754-759
33. Paul S., Dhar N.R., and Chattopadhyay A.B. Beneficial effects of cryogenic cooling over dry and wet machining on tool wear and surface finish in turning AISI 1060 steel. Journal of Materials Processing Technology 116 (2001) 44-48
34. Ding Y., and Hong S.Y. Improvement of chip breaking in machining low carbon steel by cryogenically pre-cooling the workpiece. Transaction of ASME, Journal of Manufacturing Science and Engineering 120 (1998) 76-83
35. Wang Z.Y., Rajurkar K.P., and Murugappan M. Cryogenic PCBN turning of ceramic (S&N). Wear 195 (1996) 1-6
36. Kalyan Kumar K.V.B.S., and Choudhury S.K. Investigation of tool wear and cutting force in cryogenic machining using design of experiments. Journal of Materials Processing Technology 203 Issues 1-3 (2008) 95-101
37. Dhar N.R., Paul S., and Chattopadhyay A.B. The influence of cryogenic cooling on tool wear, dimensional accuracy and surface finish in turning AISI 1040 and E4340C steels. Wear 249 (2002) 932-942
38. 2 as cutting fluid in parting/grooving and threading austenitic stainless steel. Annals of the CIRP 56 1 (2007)
39. Zbigniew Zurecki, Ranjit Ghosh, Jhon H. Frey, Finish turning of hardened powder metallurgy steel using cryogenic cooling, in: International Conference on Powder Metallurgy and Particulate Material, Las Vegas, NV, June 2003.
40. Yildiz Y., and Nalbant M. A review of cryogenic cooling in machining processes. International Journal of Machine Tools & Manufacture 48 (2008) 947-964
41. A.S. Varadharajan, P.K. Philip, B. Ramamoorthy, Investigations on hard turning with minimal pulsed jet of cutting fluid, in: Proceedings of the International Seminar on Manufacturing Technology Beyond 2000, Bangalore, India, November 17-19, 1999, pp. 173-179.
42. Philip P.K., Varadharajan A.S., and Ramamoorthy B. Influences of cutting fluid composition and delivery variables on performance in hard turning using minimal fluid in pulsed jet form. Journal of the Institution of Engineers India 82 (2001) 12-19
43. Wertheim R., Ber A., and Rotberg J. Influence of high pressure flushing through the rake face of the cutting tool. Annals of the CIRP 41 1 (1992) 101-106
44. Chepe M.A., and Philip P.K. Cutting fluid injection at tool-chip interface to improve machining performance. Journal of the Institution of Engineers India 75 (1994) 25-30
45. Mazurkiewicz M., Kubala Z., and Chow J. Metal machining with high pressure water jet cooling assistance-a new possibility. Journal of Engineering for Industry 111 (1989) 7-12
46. Bennett E.O., and Bennett D.L. Minimizing human exposure to chemicals in metal working fluids. Lubrication Engineering 43 3 (1987) 169-175
47. Kendall A.L. Friction and wear of cutting tools and cutting tool materials. ASM Handbook vol. 18 (1998), ASM International, The Materials Information Society 609-620
48. Attanasio A., Gelfi M., Giardini C., and Remino C. Minimal quantity lubrication in turning: effect on tool wear. Wear 260 (2006) 333-338
49. Kamata Y., and Obikawa T. High speed MQL finish-turning of Inconel-718 with different coated tools. Journal of Materials Processing Technology 192-193 (2007) 281-286
50. Dhar N.R., Kamruzzaman M., and Ahmed M. Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel. Journal of Materials Processing Technology 172 (2006) 299-304
51. Vikram C.H., Kumar R., and Ramamoorthy B. Performance of coated tools during hard turning under minimum fluid application. Journal of Materials Processing Technology 185 (2007) 210-216
52. Varadarajan A.S., Philip P.K., and Ramamoorthy B. Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning. International Journal of Machine Tools & Manufacture 42 (2002) 193-200
53. Diniz A.E., Ferreira J.R., and Filho F.T. Influence of refrigeration/lubrication condition on SAE 52100 hardened steel turning at several cutting speeds. International Journal of Machine Tools & Manufacture 43 (2003) 317-326
54. Chen D.C., Suzuki Y., and Sakai K. A study of turning operation by oil-water combined mist lubrication machining method. Key Engineering Materials 202-203 (2001) 47-52
55. Su Y., He N., Li L., Iqbal A., Xiao M.H., Xu S., and Qiu B.G. Refrigerated cooling air cutting of difficult-to-cut materials. International Journal of Machine Tools & Manufacture 47 (2007) 927-933
56. Li K.-M., and Liang S.Y. Performance profiling of minimum quantity lubrication in machining. International Journal of Advance Manufacturing Technology 35 (2007) 226-233
57. Obikawa T., Kamata Y., Asano Y., Nakayama K., and Otieno A.W. Micro-liter lubrication machining of Inconel 718. International Journal of Machine Tools & Manufacture 48 (2008) 1605-1612
58. Wertheim R., Ber A., and Rotberg J. Influence of high pressure flushing through the rake face of the cutting tool. Annals of the CIRP 41 1 (1992) 101-106
59. Anselom D.E., and Ricardo M. Influence of the direction and flow rate of the cutting fluid on tool life in turning process of AISI 1045 steel. International Journal of Machine Tools & Manufacture 47 (2007) 247-254
60. Ezugwu E.O., and Bonney J. Finish machining of nickel base Inconel-718, alloy with coated carbide tool under conventional and high pressure coolant supplies. Tribiology Transaction 48 1 (2005) 76-81
61. Trent E.M. Metal cutting and the tribology of seizure: III temperatures in metal cutting. Wear 128 (1988) 65-81
62. Ezugwu E.O. Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools & Manufacture 4 (2005) 1353-1367
63. Ezugwu E.O., Bonney J., Silva R.B.D., and Akir C.O. Surface integrity of finished turned Ti-6Al-4V alloy with PCD tools using conventional and high pressure coolant supplies. International Journal of Machine Tools & Manufacture 47 (2007) 884-891
64. Ezugwu E.O., and Bonney J. Effect of high-pressure coolant supply when machining nickel base Inconel-718 alloy with coated carbide tools. Journal of Materials Processing Technology 153-154 (2004) 1045-1050
65. Ezugwu E.O., Bonney J., Fadare D.A., and Sales W.F. Machining of nickel base Inconel-718 alloy with ceramic tools under finishing conditions with various coolant supply pressure. Journal of Materials Processing Technology 162-163 (2005) 609-614
66. Lopez de Lacalle L.N., Perez-Bilbatua J., Sanchez J.A., Llorente J.I., Gutierrez A., and Alboniga J. Using high pressure coolant in the drilling and turning of low machinability alloys. International Journal of Advance Manufacturing Technology 16 (2000) 85-91
67. A.K. Nandy, M.C. Gowrishankar, S. Paul, Some studies on high pressure cooling in turning of Ti-6Al-4V, International Journal of Machine Tools & Manufacture, doi:10.1016/j.ijmachtools.2008.08.008.
68. A.R. Zarena, M. Rahman, Y.S. Wong, High speed machining of aerospace alloy Ti-6Al-4V, in: Proceedings of the 33rd International SAMPE Technical Conference, Seattle, USA, 2001.
69. Tan X.C., Liu F., Cao H.J., and Zhang H. A decision-making framework model of cutting fluid selection for green manufacturing and a case study. International Journal of Machine Tools & Manufacture 129 (2002) 467-470
70. Sreejith P.S., and Ngoi B.K.A. Dry machining: machining of the future. Journal of Materials Processing Technology 101 (2000) 287-291
71. Shaji S., and Radhakrishnan V. Analysis of process parameters in surface grinding with graphite as lubricant based on the Taguchi method. Journal of Materials Processing Technology 141 (2003) 51-59
72. Lathkar G.S., and Bas U.S.K. Clean metal cutting process using solid lubricants. Proceedings of the 19th AIMTDR Conference (2000), Narosa Publishing House, IIT Madras 15-31
73. Singh D., and Rao P.V. Performance improvement of hard turning with solid lubricants. International Journal of Advance Manufacturing Technology 38 (2008) 529-535
74. Vamsi Krishna P., and Nageswara R.D. Performance evaluation of solid lubricants in terms of machining. International Journal of Machine Tools & Manufacture 48 (2008) 1131-1137
75. Nageswara R.D., and Vamsi K.P. The influence of solid lubricant particle size on machining parameters in turning. International Journal of Machine Tools & Manufacture 48 (2008) 107-111
76. Mukhopadhyay D., Banerjee S., and Suresh Kumar Reddy N. Investigation to study the applicability of solid lubricant in turning AISI 1040 steel. Journal of Manufacturing Science and Engineering 129 3 (2007) 520-526
77. V.A. Godlevski, Water steam lubrication during machining, Tribologia, 162(6) 11 (1998) 890-901.
78. Sandvik Coromant documentation (2006), Tooling Catalogues.
79. Çaki{dotless}r O., Ki{dotless}yak M., and Altan E. Comparison of gases applications to wet and dry cuttings in turning. Journal of Materials Processing Technology 153-154 (2004) 35-41
80. E. Altan, M. Ki{dotless}yak, O. Caki{dotless}r, The effect of oxygen gas application into cutting zone on machining, in: Proceedings of the Sixth Biennial Conference on Engineering Systems Design and Analysis (ESDA2002), Istanbul, 2002, pp. 1-5.
81. Ko T.J., Kim H.S., and Chung B.G. Air-oil cooling method for turning of hardened material. International Journal of Advance Manufacturing Technology 15 (1999) 470-477
82. Junyan L., Rongdi H., Li Z., and Hongbin G. Study on lubricating characteristic and tool wear with water vapor as coolant and lubricant in green cutting. Wear 262 (2007) 442-452
83. Junyan L., Rongdi H., and Yongfeng S. Research on experiments and action mechanism with water vapor as coolant and lubricant in Green cutting. International Journal of Machine Tools & Manufacture 45 (2005) 687-694
84. M. Stanford, P.M. Lister, C. Morgan, K.A. Kibble, Investigation into the use of gaseous and liquid nitrogen as a cutting fluid when turning BS 970-80A15 (En32b) plain carbon steel using WC-Co uncoated tooling, Journal of Materials Processing Technology, doi:10.1016/J.J.matprotec.2008.03.003.
85. T.T. Cockerill, Thermodynamics & fluid mechanics of a ranquehilsch vortex tube, Thesis, University of Cambridge, 1998.
86. Sarma D.K., and Dixit U.S. A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool. Journal of Materials Processing Technology 190 (2007) 160-172
87. Su Y., He N., Li L., and Li X.L. An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V. Wear 261 (2006) 760-766
88. Xavior A.M., and Adithan M. Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel. Journal of Materials Processing Technology (2008)
89. Chi S.W. Heat Pipe Theory and Practice (1976), Hemispere Publishing Corporation, Washington, DC
90. Haq N.A., and Tamizharasan T. Investigation of the effects of cooling in hard turning operations. International Journal of Advance Manufacturing Technology 30 (2006) 808-816
91. R.Y. Chiou, J.S.J. Chen, M.T. North, L. Lu, The effect of an embedded heat pipe in a cutting tool on temperature and wear, in: Proceedings of ASME Conference on Mechanical Engineering, 2003, pp. 1-8.
92. Boisse P., Altan T., and Luttervelt Van.kees. Friction and flow Stress in Forming and Cutting. first south Asian ed (2007), Viva books Pvt. Ltd pp. 64-95
93. Li Kuan-Ming, Predictive modeling of near dry machining: mechanical performance and environmental impact, Ph.D Thesis, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, 2006.
94. Loewen E.G., and Shaw M.C. On the analysis of cutting tool temperature. Transactions of the ASME 76 (1954) 217-231
95. Strenskovski J.S., and Kyung-Jin M. Finite element prediction of chip geometry and tool and workpiece temperature distributions in orthogonal cutting. ASME Journal of Engineering Industry 112 (1990) 313-318
96. Hong S.Y., and Ding Y. Micro-temperature manipulation in cryogenic machining of low carbon steel. Journal of Material Processing Technology 116 (2001) 22-30
97. Y. Ding, S.Y. Hong, A study of the cutting temperatures in machining processes cooled by liquid nitrogen, Technical Papers of the North American Research Institution of SME, 1995, pp. 115-119.
98. Baker M. An investigation of chip segmentation process using finite element analysis. Tech. Mech 23 (2003) 1-9
99. M. Vosough, V. Kalhori, P. Liu, I. Svenningson, Influence of high-pressure water-jet assisted turning on surface residual stresses on Ti-6Al-4V by measurement and finite element simulation, in: Proceedings of Third International Surface Engineering Congress, Orlando, FL, USA, ASM International, 2004, pp. 107-113.
100. Bell D.D., Chou J., Nowag L., and Liang S.Y. Modeling of the environmental effect of cutting fluid. Tribology Transactions 42 1 (1999) 168-173
101. Chiou R.Y., Lu L., Chen J.S.J., and North M.T. Investigation of dry machining with embedded heat pipe cooling by finite element analysis and experiments. International Journal of Advance Manufacturing Technology 31 (2007) 905-914
102. Aggarwal A., Singh H., Kumar P., and Singh M. Optimization of multiple quality characteristics for CNC turning under cryogenic cutting environment using desirability function. Journal of Materials Processing Technology 205 (2008) 42-50
103. Marksberry P.W., and Jawahir I.S. A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing. International Journal of Machine Tools & Manufacture 48 (2008) 878-886