2MTO, a new mapping tool to achieve lean benefits in high-variety low-volume job shops

Production Planning and Control

Volumn 28, Issue 5, 2017, Pages 444-458

  Bertolini, Massimo ^a   Romagnoli, Giovanni ^a   Zammori, Francesco ^a  

^a UNIVERSITY OF PARMA   (Italy)

Author keywords

Hybrid production planning and control system; job shop; lean; make to order; mapping tool

Indexed keywords

CONTROL SYSTEMS; PLANNING; PRODUCTION CONTROL;

HYBRID PRODUCTION; JOB SHOP; LEAN; MAKE TO ORDER; MAPPING TOOLS;

MAPPING;

EID: 85015926230     PISSN: 09537287     EISSN: 13665871     Source Type: Journal    
DOI: 10.1080/09537287.2017.1302615     Document Type: Article

References (42)

1. Alves, Thais, Iris D., Tommelein, and Glenn, Ballard. 2005. “Value Stream Mapping for Make-to-order Products in a Job Shop Environment.” Construction Research Congress 2005:Broadening Perspectives–Proceedings of the Congress, 13–22. http://www.scopus.com/inward/record.url?eid=2-s2.0-27644493989&partnerID=40&md5=30cd98e526dd154f3f259342d9918fd0.
2. Atwater, J. Brian, and Satya S., Chakravorty. 2002. “A Study of the Utilization of Capacity Constrained Resources in Drum-Buffer-Rope Systems.” Production and Operations Management 11 (2):259–273. http://doi.wiley.com/10.1111/j.1937-5956.2002.tb00495.x.
3. Baskerville, Richard L., and A. Trevor, Wood-Harper. 1996. “A Critical Perspective on Action Research as a Method for Information Systems Research.” Journal of Information Technology 11 (3):235–246. Accessed January 10, 2017. http://borders.arizona.edu/classes/mis696a/resources/readings/Baskerville-1997-JIT-ACriticalPerspectiveOnActionResearchAsAMethodForISResearch.pdf10.1080/026839696345289
4. Bergamaschi, D., R., Cigolini, Marco, Perona, and Alberto, Portioli. 1997. “Order Review and Release Strategies in a Job Shop Environment:A Review and a Classification.” International Journal of Production Research 35 (2):399–420. Accessed January 16, 2014. http://www.tandfonline.com/doi/abs/10.1080/00207549719582110.1080/002075497195821
5. Bertolini, Massimo, Marcello, Braglia, Giovanni, Romagnoli, and Francesco, Zammori. 2013. “Extending Value Stream Mapping:The Synchro-MRP Case.” International Journal of Production Research 51 (18):5499–5519. Accessed February 6, 2014. http://www.tandfonline.com/doi/abs/10.1080/00207543.2013.784415
6. Bertolini, Massimo, and Giovanni, Romagnoli. 2013. “Design and Simulation of Multi-CONWIP into a Make-to-order Firm with General Job Shop Configuration.” CIE43–43rd International Conference on Computers and Industrial Engineering, Hong Kong, 149.1–149.15.
7. Bertolini, Massimo, Giovanni, Romagnoli, and Francesco, Zammori. 2016a. “Assessing Performance of Workload Control in High Variety Low Volumes MTO Job Shops:A Simulative Analysis.” Proceedings of 2015 International Conference on Industrial Engineering and Systems Management, IEEE IESM 2015, Seville, Spain, 362–370.
8. Bertolini, Massimo, Giovanni, Romagnoli, and Francesco, Zammori. 2016b. “Simulation of Two Hybrid Production Planning and Control Systems:A Comparative Analysis.” Proceedings of 2015 International Conference on Industrial Engineering and Systems Management, IEEE IESM 2015, Seville, Spain, 388–397.
9. Bertrand, J. W. M., and H. P. G., Van Ooijen. 2002. “Workload Based Order Release and Productivity:A Missing Link.” Production Planning & Control 13 (7):665–678. Accessed May 10, 2013. http://www.tandfonline.com/doi/full/10.1080/095372802100002627610.1080/0953728021000026276
10. Bonaccorsi, Andrea, Gionata, Carmignani, and Francesco, Zammori. 2011. “Service Value Stream Management (SVSM):Developing Lean Thinking in the Service Industry.” Journal of Service Science and Management 4 (4):428–439. Accessed January 16, 2014. http://www.scirp.org/journal/PaperDownload.aspx?DOI=10.4236/jssm.2011.4404810.4236/jssm.2011.44048
11. Braglia, Marcello, Gionata, Carmignani, and Francesco, Zammori. 2006. “A New Value Stream Mapping Approach for Complex Production Systems.” International Journal of Production Research 44 (18–19):3929–3952. Accessed May 10, 2013. http://www.tandfonline.com/doi/abs/10.1080/0020754060069054510.1080/00207540600690545
12. Braglia, Marcello, Marco, Frosolini, and Francesco, Zammori. 2009. “Uncertainty in Value Stream Mapping Analysis.” International Journal of Logistics Research and Applications 12 (6):435–453. Accessed January 16, 2014. http://www.tandfonline.com/doi/abs/10.1080/1367556080260155910.1080/13675560802601559
13. Cigolini, R., and Alberto, Portioli-Staudacher. 2002. “An Experimental Investigation on Workload Limiting Methods with ORR Policies in a Job Shop Environment.” Production Planning & Control 13 (7):602–613.10.1080/0953728021000026221
14. Coughlan, P., and D., Coghlan. 2009. “Action Research.” In Researching Operations Management, edited by C., Karlsson, 236–264. Abingdon:Routledge.
15. Esfandyari, Alireza, Mohd Rasid, Osman, Napsiah, Ismail, and Farzad, Tahriri. 2011. “Application of Value Stream Mapping Using Simulation to Decrease Production Lead Time:A Malaysian Manufacturing Case.” International Journal of Industrial and Systems Engineering 8 (2):230.10.1504/IJISE.2011.041371
16. Germs, R., and J., Riezebos. 2010. “Workload Balancing Capability of Pull Systems in MTO Production.” International Journal of Production Research 48 (8):2345–2360. Accessed March 20, 2013. http://www.tandfonline.com/doi/abs/10.1080/0020754090281431410.1080/00207540902814314
17. Goyal, Kapil Kumar, P. K., Jain, and Madhu, Jain. 2012. “A Comprehensive Approach to Operation Sequence Similarity Based Part Family Formation in the Reconfigurable Manufacturing System.” International Journal of Production Research 51 (6):1–15.
18. Gurumurthy, Anand, and Rambabu, Kodali. 2011. “Design of Lean Manufacturing Systems Using Value Stream Mapping with Simulation:A Case Study.” Journal of Manufacturing Technology Management 22 (4):444–473.10.1108/17410381111126409
19. Haider, A., and J., Mirza. 2015. “An Implementation of Lean Scheduling in a Job Shop Environment.” Advances in Production Engineering & Management 10 (1):5–17. http://apem-journal.org/Archives/2015/Abstract-APEM10-1_005-017.html.10.14743/apem2015.1.188
20. Hendry, Linda, Yuan, Huang, and Mark, Stevenson. 2013. “Workload Control:Successful Implementation Taking a Contingency-based View of Production Planning & Control.” International Journal of Operations & Production Management 33 (1):69–103. doi:10.1108/01443571311288057.
21. Henrich, Peter, Martin J., Land, Gerard J. C., Gaalman, and Durk-Jouke, Van Der Zee. 2004. “Reducing Feedback Requirements of Workload Control.” International Journal of Production Research 42 (24):5235–5252. Accessed April 10, 2013. http://www.tandfonline.com/doi/abs/10.1080/002075404200027043010.1080/0020754042000270430
22. Hopp, W. J. Wallace J., and Mark L., Spearman. 2004. “To Pull or Not to Pull:What is the Question?” Manufacturing & Service Operations Management 6 (2):133–148. Accessed March 7, 2013. http://msom.journal.informs.org/cgi/doi/10.1287/msom.1030.002810.1287/msom.1030.0028
23. Jasti, Naga Vamshi Krishna, and Rambabu, Kodali. 2015. “A Critical Review of Lean Supply Chain Management Frameworks:Proposed Framework.” Production Planning & Control 26 (13):1051–1068.10.1080/09537287.2015.1004563
24. Lödding, H., K. W., Yu, and H. P., Wiendahl. 2003. “Decentralized WIP-Oriented Manufacturing Control (DEWIP).” Production Planning & Control 14 (1):42–54. Accessed March 13, 2013. http://www.tandfonline.com/doi/abs/10.1080/095372802100007870110.1080/0953728021000078701
25. Marangoni, Giulio, Giovanni, Romagnoli, and Francesco, Zammori. 2013. “Multiple Value Stream Mapping:How to Implement Work Load Control in Complex Systems.” Proceedings of 2013 International Conference on Industrial Engineering and Systems Management, IEEE - IESM 2013, Rabat. http://ieeexplore.ieee.org/document/6761377/
26. Nash, Mark A., and Sheila R., Poling. 2008. Mapping the Total Value Stream. London:Productivity Press.
27. Parthanadee, Parthana, and Jirachai, Buddhakulsomsiri. 2012. “Production Efficiency Improvement in Batch Production System Using Value Stream Mapping and Simulation:A Case Study of the Roasted and Ground Coffee Industry.” Production Planning & Control 1–22. Accessed April 26, 2013. http://www.tandfonline.com/doi/abs/10.1080/09537287.2012.702866
28. Petroni, Alberto, Francesco, Zammori, and Giuliano Marolla. 2017. “World Class Manufacturing in Make-to-order Batch-Production SMEs:An Exploratory Analysis in Northern Italy.” International Journal of Business Excellence 11 (2):241–275.10.1080/09537287.2015.1004563.
29. Romagnoli, Giovanni. 2015. “Design and Simulation of CONWIP in the Complex Flexible Job Shop of a Make-to-order Manufacturing Firm.” International Journal of Industrial Engineering Computations 6 (1):117–134. doi:10.5267/j.ijiec.2014.8.003.
30. Silva, Cristovao, Mark, Stevenson, and Matthias, Thurer. 2015. “A Case Study of the Successful Implementation of Workload Control:A Practitioner-led Approach.” Journal of Manufacturing Technology Management 26 (2):280–296.doi:10.1108/JMTM-10-2013-0144
31. Slomp, Jannes, Jos A. C., Bokhorst, and Remco, Germs. 2009. “A Lean Production Control System for High-variety/Low-volume Environments:A Case Study Implementation.” Production Planning & Control 20 (7):586–595. Accessed March 11, 2013. http://www.tandfonline.com/doi/abs/10.1080/0953728090308616410.1080/09537280903086164
32. Soepenberg, G. D., Martin J., Land, and Gerard J. C., Gaalman. 2012. “Adapting Workload Control for Job Shops with High Routing Complexity.” International Journal of Production Economics 140 (2):681–690. Accessed March 2, 2013. http://linkinghub.elsevier.com/retrieve/pii/S092552731200114410.1016/j.ijpe.2012.03.018
33. Stevenson, Mark, Linda C., Hendry, and B. G., Kingsman. 2005. “A Review of Production Planning and Control:The Applicability of Key Concepts to the Make-to-order Industry.” International Journal of Production Research 43 (5):869–898. Accessed April 30, 2013. http://www.tandfonline.com/doi/abs/10.1080/002075404200029852010.1080/0020754042000298520
34. Stevenson, Mark, Yuan, Huang, and Linda C., Hendry. 2009. “The Development and Application of an Interactive End-user Training Tool:Part of an Implementation Strategy for Workload Control.” Production Planning & Control 20 (7):622–635. Accessed April 26, 2013. http://www.tandfonline.com/doi/abs/10.1080/0953728090303431310.1080/09537280903034313
35. Stevenson, Mark, Yuan, Huang, Linda C., Hendry, and Erik, Soepenberg. 2010. “The Theory & Practice of Workload Control:A Research Agenda & Implementation Strategy.” International Journal of Production Economics 131 (2):689–700. Accessed March 28, 2013. http://eprints.lancs.ac.uk/34617/
36. Tham, Y. W., W., Yu, and B., Baliga. 2007. “Applying Lean Techniques to the Value Stream in a Job Shop Environment.” 20th Annual Conference of the American Society for Engineering Management, 129–138.
37. Thürer, Matthias, Martin J., Land, and Mark, Stevenson. 2014. “Card-based Workload Control for Job Shops:Improving COBACABANA.” International Journal of Production Economics 147 (A):180–188. Accessed February 6, 2014. http://linkinghub.elsevier.com/retrieve/pii/S092552731300420910.1016/j.ijpe.2013.09.015
38. Thürer, Matthias, Mark, Stevenson, and Cristovao, Silva. 2011. “Three Decades of Workload Control Research:A Systematic Review of the Literature.” International Journal of Production Research 49 (23):6905–6935. Accessed May 10, 2013. http://www.tandfonline.com/doi/abs/10.1080/00207543.2010.51900010.1080/00207543.2010.519000
39. Thürer, Matthias, Mark, Stevenson, Cristovao, Silva, Martin J., Land, and Lawrence D., Fredendall. 2012. “Workload Control and Order Release:A Lean Solution for Make-to-order Companies.” Production and Operations Management 21 (5):939–953. Accessed February 6, 2014. http://doi.wiley.com/10.1111/j.1937-5956.2011.01307.x10.1111/poms.2012.21.issue-5
40. Wiendhal, Hans-Peter. 1995. Load-oriented Manufacturing Control. Berlin:Springer.10.1007/978-3-642-57743-7
41. Womack, James P., and Daniel T., Jones. 2003. Lean Thinking–Banish Waste and Create Wealth in Your Corporation. 2nd ed. London:Free Press.
42. Zammori, Francesco, Marcello, Braglia, and Davide, Castellano. 2016. “Just-in-time Parts Feeding Policies for Paced Assembly Lines:Possible Solutions for Highly Constrained Layouts.” International Transactions in Operational Research 23 (4):691–724. doi:10.1111/itor.12173.