A comprehensive review on vibration energy harvesting: Modelling and realization

Renewable and Sustainable Energy Reviews

Volumn 74, Issue , 2017, Pages 1-18

  Wei, Chongfeng ^a   Jing, Xingjian ^a  

^a HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

Energy conversion mechanism; Energy harvesting; Nonlinearity; Vibration

Indexed keywords

ENERGY CONVERSION EFFICIENCY; ENERGY EFFICIENCY; NATURAL FREQUENCIES; WIRELESS SENSOR NETWORKS;

CONVERSION MECHANISM; ENERGY CONVERSION MECHANISM; ENERGY HARVESTER; MODELLING AND REALIZATION; NONLINEARITY; OUTPUT PERFORMANCE; POWER OUTPUT; STATE-OF-THE ART REVIEWS; VIBRATION; VIBRATION ENERGY HARVESTING;

ENERGY HARVESTING;

EID: 85013176797     PISSN: 13640321     EISSN: 18790690     Source Type: Journal    
DOI: 10.1016/j.rser.2017.01.073     Document Type: Review

References (204)

1. [1] Donelan, J.M., Li, Q., Naing, V., Hoffer, J.A., Weber, D.J., Kuo, A.D., Biomechanical energy harvesting: generating electricity during walking with minimal user effort. Science 319:5864 (2008), 807–810.
2. [2] Choi, S.-B., Seong, M.-S., Kim, K.-S., Vibration control of an electrorheological fluid-based suspension system with an energy regenerative mechanism. Proc Inst Mech Eng Part D: J Automob Eng 223:4 (2009), 459–469.
3. [3] Cassidy IL, Scruggs JT, Behrens S. Design of Electromagnetic Energy Harvesters for Large-scale Structural Vibration Applications. 2011.
4. [4] Rome, L.C., Flynn, L., Goldman, E.M., Yoo, T.D., Generating electricity while walking with loads. Science 309:5741 (2005), 1725–1728.
5. [5] Erturk, A., Inman, D.J., Broadband piezoelectric power generation on high-energy orbits of the bistable Duffing oscillator with electromechanical coupling. J Sound Vib 330:10 (2011), 2339–2353.
6. [6] Roundy, S., Wright, P.K., A piezoelectric vibration based generator for wireless electronics. Smart Mater Struct 13:5 (2004), 1131–1142.
7. [7] Roundy, S., Wright, P.K., Rabaey, J., A study of low level vibrations as a power source for wireless sensor nodes. Comput Commun 26:11 (2003), 1131–1144.
8. [8] Lumentut, M.F., Howard, I.M., Analytical and experimental comparisons of electromechanical vibration response of a piezoelectric bimorph beam for power harvesting. Mech Syst Signal Process 36:1 (2013), 66–86.
9. [9] Wang, H., Meng, Q., Analytical modeling and experimental verification of vibration-based piezoelectric bimorph beam with a tip-mass for power harvesting. Mech Syst Signal Process 36:1 (2013), 193–209.
10. [10] Chen, Z., Yang, Y., Lu, Z., Luo, Y., Broadband characteristics of vibration energy harvesting using one-dimensional phononic piezoelectric cantilever beams. Physica B: Condens Matter 410 (2013), 5–12.
11. [11] Liu, J.-Q., Fang, H.-B., Xu, Z.-Y., Mao, X.-H., Shen, X.-C., Chen, D., et al. A MEMS-based piezoelectric power generator array for vibration energy harvesting. Microelectron J 39:5 (2008), 802–806.
12. [12] Sodano, H.A., Inman, D.J., Park, G., Comparison of piezoelectric energy harvesting devices for recharging batteries. J Intell Mater Syst Struct 16:10 (2005), 799–807.
13. [13] Lefeuvre, E., Badel, A., Richard, C., Guyomar, D., Piezoelectric energy harvesting device optimization by synchronous electric charge extraction. J Intell Mater Syst Struct 16:10 (2005), 865–876.
14. [14] Cottone, F., Vocca, H., Gammaitoni, L., Nonlinear energy harvesting. Phys Rev Lett, 102(8), 2009, 080601.
15. [15] Gammaitoni, L., Neri, I., Vocca, H., Nonlinear oscillators for vibration energy harvesting. Appl Phys Lett, 94(16), 2009, 164102.
16. [16] Triplett, A., Quinn, D.D., The effect of non-linear piezoelectric coupling on vibration-based energy harvesting. J Intell Mater Syst Struct 20:16 (2009), 1959–1967.
17. [17] Barton, D.A.W., Burrow, S.G., Clare, L.R., Energy harvesting from vibrations with a nonlinear oscillator. J Vib Acoust, 132(2), 2010 [21009].
18. [18] Ferrari, M., Ferrari, V., Guizzetti, M., Marioli, D., A single-magnet nonlinear piezoelectric converter for enhanced energy harvesting from random vibrations. Procedia Eng 5 (2010), 1156–1159.
19. [19] Mann, B.P., Owens, B.A., Investigations of a nonlinear energy harvester with a bistable potential well. J Sound Vib 329:9 (2010), 1215–1226.
20. [20] Chunchuan Liu, X.J., Vibration energy harvesting with a nonlinear structure. Appear Nonlinear Dyn, 2016.
21. [21] Kymissis J, Kendall C, Paradiso J, Gershenfeld N. Parasitic power harvesting in shoes. In: Wearable computers, 1998. Digest of papers. Second international symposium on. 1998.
22. [22] Mateu, L., Moll, F., Optimum piezoelectric bending beam structures for energy harvesting using shoe inserts. J Intell Mater Syst Struct 16:10 (2005), 835–845.
23. [23] Shenck, N.S., Paradiso, J.A., Energy scavenging with shoe-mounted piezoelectrics. Micro IEEE 21:3 (2001), 30–42.
24. [24] Trapanese, M., Optimization of a sea wave energy harvesting electromagnetic device. Magn IEEE Trans on 44:11 (2008), 4365–4368.
25. [25] White, R.M., Voltmer, F.W., Direct piezoelectric coupling to surface elastic waves. Appl Phys Lett 7:12 (1965), 314–316.
26. [26] Wu, N., Wang, Q., Xie, X., Ocean wave energy harvesting with a piezoelectric coupled buoy structure. Appl Ocean Res 50 (2015), 110–118.
27. [27] Xie, X.D., Wang, Q., Wu, N., Energy harvesting from transverse ocean waves by a piezoelectric plate. Int J Eng Sci 81 (2014), 41–48.
28. [28] Pearson, M.R., Eaton, M.J., Pullin, R., Featherston, C.A., Holford, K.M., Energy harvesting for aerospace structural health monitoring systems. J Phys: Conf Ser, 382(1), 2012, 012025.
29. [29] Xie, H., Huang, Z., Guo, S., Torru, E., Feasibility of an electrostatic energy harvesting device for CFCs aircraft. Procedia Eng 99 (2015), 1213–1222.
30. [30] Yuan, T., Yang, J., Song, R., Liu, X., Vibration energy harvesting system for railroad safety based on running vehicles. Smart Mater Struct, 23(12), 2014, 125046.
31. [31] Gatti, G., Brennan, M.J., Tehrani, M.G., Thompson, D.J., Harvesting energy from the vibration of a passing train using a single-degree-of-freedom oscillator. Mech Syst Signal Process 66–67 (2016), 785–792.
32. [32] Erturk, A., Electromechanical modeling of piezoelectric energy harvesters. 2009, Virginia Polytechnic Institute and State University, Blacksburg.
33. [33] Beeby, S.P., Tudor, M.J., White, N.M., Energy harvesting vibration sources for microsystems applications. Meas Sci Technol, 17(12), 2006, R175.
34. [34] Williams, C.B., Yates, R.B., Analysis of a micro-electric generator for microsystems. Sens Actuators A: Phys 52:1–3 (1996), 8–11.
35. [35] Beeby, S.P., Torah, R.N., Tudor, M.J., Glynne-Jones, P., Donnell, T.O., Saha, C.R., et al. A micro electromagnetic generator for vibration energy harvesting. J Micromech Microeng, 17(7), 2007, 1257.
36. [36] Moheimani, S.R., Fleming, A.J., Fundamentals of piezoelectricity. Piezoelectr Transducers Vib Control Damping, 2006, 9–35.
37. [37] Meitzler, A., Tiersten, H., Warner, A., Berlincourt, D., Couqin, G., Welsh, F. III, IEEE Stand Piezoelectr, 1988 [Society].
38. [38] Sodano, H.A., Inman, D.J., Park, G., A review of power harvesting from vibration using piezoelectric materials. Shock Vib Dig 36:3 (2004), 197–205.
39. [39] Lu, F., Lee, H.P., Lim, S.P., Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications. Smart Mater Struct, 13(1), 2004, 57.
40. [40] Ramsay, M.J., Clark, W.W., Piezoelectr Energy Harvest Bio-MEMS Appl, 2001.
41. [41] Du Toit, N.E., Modeling and design of a MEMS piezoelectric vibration energy harvester. 2005, Massachusetts Institute of Technology, Cambridge.
42. [42] Erturk, A., Inman, D.J., A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. J Vib Acoust, 130(4), 2008 [41002].
43. [43] DuToit, N.E., Wardle, B.L., Experimental verification of models for microfabricated piezoelectric vibration energy harvesters. AIAA J 45:5 (2007), 1126–1137.
44. [44] Dutoit, N.E., Wardle, B.L., Kim, S.-G., Design considerations for mems-scale piezoelectric mechanical vibration energy harvesters. Integr Ferroelectr 71:1 (2005), 121–160.
45. [45] Roundy, S., Wright, P.K., Rabaey, J.M., Energy scavenging for wireless sensor networks. 2003, Springer/Kluwer Academic Publishers.
46. [46] Poulin, G., Sarraute, E., Costa, F., Generation of electrical energy for portable devices: comparative study of an electromagnetic and a piezoelectric system. Sens Actuators A: Phys 116:3 (2004), 461–471.
47. [47] Gherca, R., Olaru, R., Harvesting vibration energy by electromagnetic induction: Annals of the University of Craiova, Craiova. Electr Eng Ser 35 (2011), 7–12.
48. [48] Joon Kim, K., Cottone, F., Goyal, S., Punch, J., Energy scavenging for energy efficiency in networks and applications. Bell Labs Tech J 15:2 (2010), 7–29.
49. [49] Williams, C.B., Shearwood, C., Harradine, M.A., Mellor, P.H., Birch, T.S., Yates, R.B., Development of an electromagnetic micro-generator. Circuits Dev Syst IEE Proc 148:6 (-, 2001), 337–342.
50. [50] Glynne-Jones, P., Tudor, M.J., Beeby, S.P., White, N.M., An electromagnetic, vibration-powered generator for intelligent sensor systems. Sens Actuators A: Phys 110:1–3 (2004), 344–349.
51. [51] Saha, C.R., O'Donnell, T., Loder, H., Beeby, S., Tudor, J., Optimization of an electromagnetic energy harvesting device. Magn IEEE Trans on 42:10 (2006), 3509–3511.
52. [52] Beeby S-P, Tudor M-J, Torah R-N, Koukharenko E, Roberts S, O'Donnell T, et al. Macro and Microscale Electromagnetic Kinetic Energy Harvesting Generators. arXiv preprint arXiv:0711.3314, 2007.
53. [53] Torah, R., Glynne-Jones, P., Tudor, M., Donnell, T.O., Roy, S., Beeby, S., Self-powered autonomous wireless sensor node using vibration energy harvesting. Meas Sci Technol, 19(12), 2008, 125202.
54. [54] Liu, H., Qian, Y., Lee, C., A multi-frequency vibration-based MEMS electromagnetic energy harvesting device. Sens Actuators A: Phys 204 (2013), 37–43.
55. [55] Meninger, S., Mur-Miranda, J.O., Amirtharajah, R., Chandrakasan, A.P., Lang, J.H., Vibration-to-electric energy conversion. Very Large Scale Integr (VLSI) Syst IEEE Trans on 9:1 (2001), 64–76.
56. [56] Borno RT. Transpiration as a Mechanism for Mechanical and Electrical Energy Conversion. 2008. [ProQuest].
57. [57] Roundy S, Wright PK, Pister KS. Micro-electrostatic vibration-to-electricity converters. In: ASME 2002 international mechanical engineering congress and exposition. American Society of Mechanical Engineers. 2002.
58. [58] Quinn, D.D., Triplett, A.L., Bergman, L.A., Vakakis, A.F., Comparing linear and essentially nonlinear vibration-based energy harvesting. J Vib Acoust, 133(1), 2010 [11001].
59. [59] Ramlan, R., Brennan, M.J., Mace, B.R., Kovacic, I., Potential benefits of a non-linear stiffness in an energy harvesting device. Nonlinear Dyn 59:4 (2010), 545–558.
60. [60] Daqaq, M.F., Masana, R., Erturk, A., Dane Quinn, D., On the role of nonlinearities in vibratory energy harvesting: a critical review and discussion. Appl Mech Rev, 66(4), 2014 [40801].
61. [61] Vijayan, K., Friswell, M.I., Haddad Khodaparast, H., Adhikari, S., Non-linear energy harvesting from coupled impacting beams. Int J Mech Sci 96–97 (2015), 101–109.
62. [62] Ferrari, M., Ferrari, V., Guizzetti, M., Andò, B., Baglio, S., Trigona, C., Improved energy harvesting from wideband vibrations by nonlinear piezoelectric converters. Sens Actuators A: Phys 162:2 (2010), 425–431.
63. [63] Stanton, S.C., McGehee, C.C., Mann, B.P., Nonlinear dynamics for broadband energy harvesting: investigation of a bistable piezoelectric inertial generator. Physica D: Nonlinear Phenom 239:10 (2010), 640–653.
64. [64] Firoozy, P., Khadem, S.E., Pourkiaee, S.M., Broadband energy harvesting using nonlinear vibrations of a magnetopiezoelastic cantilever beam. Int J Eng Sci 111 (2017), 113–133.
65. [65] Erturk, A., Hoffmann, J., Inman, D.J., A piezomagnetoelastic structure for broadband vibration energy harvesting. Appl Phys Lett, 94(25), 2009, 254102.
66. [66] Cao, J., Zhou, S., Inman, D.J., Lin, J., Nonlinear dynamic characteristics of variable inclination magnetically coupled piezoelectric energy harvesters. J Vib Acoust, 137(2), 2015 [21015].
67. [67] Van Blarigan, L., Danzl, P., Moehlis, J., A broadband vibrational energy harvester. Appl Phys Lett, 100(25), 2012, 253904.
68. [68] Harne, R.L., Thota, M., Wang, K.W., Concise and high-fidelity predictive criteria for maximizing performance and robustness of bistable energy harvesters. Appl Phys Lett, 102(5), 2013, 053903.
69. [69] Wu, Z., Harne, R.L., Wang, K.W., Energy harvester synthesis via coupled linear-bistable system with multistable dynamics. J Appl Mech, 81(6), 2014 [61005].
70. [70] McInnes, C.R., Gorman, D.G., Cartmell, M.P., Enhanced vibrational energy harvesting using nonlinear stochastic resonance. J Sound Vib 318:4–5 (2008), 655–662.
71. [71] Ghandchi Tehrani, M., Elliott, S.J., Extending the dynamic range of an energy harvester using nonlinear damping. J Sound Vib 333:3 (2014), 623–629.
72. [72] Stanton, S.C., Owens, B.A.M., Mann, B.P., Harmonic balance analysis of the bistable piezoelectric inertial generator. J Sound Vib 331:15 (2012), 3617–3627.
73. [73] Luongo, A., Zulli, D., Nonlinear energy sink to control elastic strings: the internal resonance case. Nonlinear Dyn, 2015, 1–11.
74. [74] Harne, R.L., Wang, K.W., Prospects for nonlinear energy harvesting systems designed near the elastic stability limit when driven by colored noise. J Vib Acoust, 136(2), 2013 [21009].
75. [75] Jang, S.-J., Rustighi, E., Brennan, M.J., Lee, Y.P., Jung, H.-J., Design of a 2DOF vibrational energy harvesting device. J Intell Mater Syst Struct 22:5 (2011), 443–448.
76. [76] Vinod, R.C., Prasad, M.G., Yong, S., Frank, T.F., A vibration energy harvesting device with bidirectional resonance frequency tunability. Smart Mater Struct, 17(1), 2008, 015035.
77. [77] Berdy, D.F., Jung, B., Rhoads, J.F., Peroulis, D., Wide-bandwidth, meandering vibration energy harvester with distributed circuit board inertial mass. Sens Actuators A: Phys 188 (2012), 148–157.
78. [78] Brennan, M.J., Tang, B., Melo, G.P., Lopes Jr, V., An investigation into the simultaneous use of a resonator as an energy harvester and a vibration absorber. J Sound Vib 333:5 (2014), 1331–1343.
79. [79] Marinkovic, B., Koser, H., Demonstration of wide bandwidth energy harvesting from vibrations. Smart Mater Struct, 21(6), 2012, 065006.
80. [80] Cecilia, D.R., Michael, J.A., David, F.B., Robert, F.R., Efficiency of energy conversion for devices containing a piezoelectric component. J Micromech Microeng, 14(5), 2004, 717.
81. [81] Ivensky, G., Zafrany, I., Ben-Yaakov, S., Generic operational characteristics of piezoelectric transformers. Power Electron IEEE Trans on 17:6 (2002), 1049–1057.
82. [82] Mikio, U., Kentaro, N., Sadayuki, U., Analysis of the transformation of mechanical impact energy to electric energy using piezoelectric vibrator. Jpn J Appl Phys, 35(5S), 1996, 3267.
83. [83] Mikio, U., Kentaro, N., Sadayuki, U., Energy storage characteristics of a piezo-generator using impact induced vibration. Jpn J Appl Phys, 36(5S), 1997, 3146.
84. [84] Ferdous, R.M., Reza, A.W., Siddiqui, M.F., Renewable energy harvesting for wireless sensors using passive RFID tag technology: a review. Renew Sustain Energy Rev 58 (2016), 1114–1128.
85. [85] Cho, J., Anderson, M., Richards, R., Bahr, D., Richards, C., Optimization of electromechanical coupling for a thin-film PZT membrane: I. Modeling. J Micromech Microeng, 15(10), 2005, 1797.
86. [86] Cho, J., Anderson, M., Richards, R., Bahr, D., Richards, C., Optimization of electromechanical coupling for a thin-film PZT membrane: II. Experiment. J Micromech Microeng, 15(10), 2005, 1804.
87. [87] Wang, X., Liang, X., Shu, G., Watkins, S., Coupling analysis of linear vibration energy harvesting systems. Mech Syst Signal Process 70–71 (2016), 428–444.
88. [88] Wang, X., John, S., Watkins, S., Yu, X., Xiao, H., Liang, X., et al. Similarity and duality of electromagnetic and piezoelectric vibration energy harvesters. Mech Syst Signal Process 52–53 (2015), 672–684.
89. [89] Wang, X., Liang, X., Hao, Z., Du, H., Zhang, N., Qian, M., Comparison of electromagnetic and piezoelectric vibration energy harvesters with different interface circuits. Mech Syst Signal Process 72–73 (2016), 906–924.
90. [90] Wang, X., Liang, X., Wei, H., A study of electromagnetic vibration energy harvesters with different interface circuits. Mech Syst Signal Process 58–59 (2015), 376–398.
91. [91] Renno, J.M., Daqaq, M.F., Inman, D.J., On the optimal energy harvesting from a vibration source. J Sound Vib 320:1–2 (2009), 386–405.
92. [92] Shu, Y.C., Lien, I.C., Efficiency of energy conversion for a piezoelectric power harvesting system. J Micromech Microeng, 16(11), 2006, 2429.
93. [93] Shu, Y.C., Lien, I.C., Analysis of power output for piezoelectric energy harvesting systems. Smart Mater Struct, 15(6), 2006, 1499.
94. [94] Goldfarb, M., Jones, L.D., On the efficiency of electric power generation With piezoelectric ceramic. J Dyn Syst Meas Control 121:3 (1999), 566–571.
95. [95] Roundy, S., On the effectiveness of vibration-based energy harvesting. J Intell Mater Syst Struct 16:10 (2005), 809–823.
96. [96] Erturk, A., Inman, D.J., Issues in mathematical modeling of piezoelectric energy harvesters. Smart Mater Struct, 17(6), 2008, 065016.
97. [97] Erturk, A., Inman, D.J., On mechanical modeling of cantilevered piezoelectric vibration energy harvesters. J Intell Mater Syst Struct, 19, 2008, 15.
98. [98] Erturk, A., Inman, D.J., An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Mater Struct, 18(2), 2009, 025009.
99. [99] Roundy, S., Leland, E.S., Baker, J., Carleton, E., Reilly, E., Lai, E., et al. Improving power output for vibration-based energy scavengers. Pervas Comput IEEE 4:1 (2005), 28–36.
100. [100] Bilgen, O., Wang, Y., Inman, D.J., Electromechanical comparison of cantilevered beams with multifunctional piezoceramic devices. Mech Syst Signal Process 27 (2012), 763–777.
101. [101] De Paula, A.S., Inman, D.J., Savi, M.A., Energy harvesting in a nonlinear piezomagnetoelastic beam subjected to random excitation. Mech Syst Signal Process 54–55 (2015), 405–416.
102. [102] Lumentut, M.F., Howard, I.M., Parametric design-based modal damped vibrational piezoelectric energy harvesters with arbitrary proof mass offset: numerical and analytical validations. Mech Syst Signal Process 68–69 (2016), 562–586.
103. [103] Niell, G.E., Alex, A.E., Myron, S., A self-powered mechanical strain energy sensor. Smart Mater Struct, 10(2), 2001, 293.
104. [104] Choi, W.J., Jeon, Y., Jeong, J.H., Sood, R., Kim, S.G., Energy harvesting MEMS device based on thin film piezoelectric cantilevers. J Electroceram 17:2–4 (2006), 543–548.
105. [105] Shen, D., Park, J.-H., Noh, J.H., Choe, S.-Y., Kim, S.-H., Wikle Iii, H.C., et al. Micromachined PZT cantilever based on SOI structure for low frequency vibration energy harvesting. Sens Actuators A: Phys 154:1 (2009), 103–108.
106. [106] Dongna, S., Jung-Hyun, P., Jyoti, A., Song-Yul, C., Howard, III, C.W., Dong-Joo, K., The design, fabrication and evaluation of a MEMS PZT cantilever with an integrated Si proof mass for vibration energy harvesting. J Micromech Microeng, 18(5), 2008, 055017.
107. [107] Roundy, S.J., Energy scavenging for wireless sensor nodes with a focus on vibration to electricity conversion. 2003, University of California, Berkeley.
108. [108] Eli, S.L., Paul, K.W., Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload. Smart Mater Struct, 15(5), 2006, 1413.
109. [109] Erturk, A., Renno, J.M., Inman, D.J., Modeling of piezoelectric energy harvesting from an L-shaped beam-mass structure with an application to UAVs. J Intell Mater Syst Struct 20:5 (2008), 529–544.
110. [110] Elfrink, R., Kamel, T.M., Goedbloed, M., Matova, S., Hohlfeld, D., Andel, Yv, et al. Vibration energy harvesting with aluminum nitride-based piezoelectric devices. J Micromech Microeng, 19(9), 2009, 094005.
111. [111] Ahmed, E., Mohamed, A.E.M., Maged, G., Mohamed, D., Testing and evaluation of stretching strain in clamped–clamped beams for energy harvesting. Smart Mater Struct, 25(11), 2016, 115006.
112. [112] Fang, H.-B., Liu, J.-Q., Xu, Z.-Y., Dong, L., Wang, L., Chen, D., et al. Fabrication and performance of MEMS-based piezoelectric power generator for vibration energy harvesting. Microelectron J 37:11 (2006), 1280–1284.
113. [113] Wei W, Tongqing Y, Xurui C, Xi Y, Qifa Z. Vibration energy harvesting using piezoelectric circular diaphragm array. In: Applications of ferroelectrics (ISAF/PFM), 2011 international symposium on and 2011 international symposium on piezoresponse force microscopy and nanoscale phenomena in polar materials. 2011.
114. [114] Ericka M, Vasic D, Costa F, Poulin G, Tliba S. Energy harvesting from vibration using a piezoelectric membrane. In: J de Phys IV (Proceedings). EDP Sciences. 2005.
115. [115] Minazara, E., Vasic, D., Costa, F., Poulin, G., piezoelectric diaphragm for vibration energy harvesting. Ultrasonics 44:Supplement (2006), Se699–Se703.
116. [116] Clark, W., Mo, C., Piezoelectric energy harvesting for bio MEMS applications. Priya, S., Inman, D., (eds.) Energy harvesting technologies, 2009, Springer, US, 405–430.
117. [117] Sodano, H.A., Park, G., Inman, D.J., An investigation into the performance of macro-fiber composites for sensing and structural vibration applications. Mech Syst Signal Process 18:3 (2004), 683–697.
118. [118] Rezaeisaray, M., Gowini, M.E., Sameoto, D., Raboud, D., Moussa, W., Low frequency piezoelectric energy harvesting at multi vibration mode shapes. Sens Actuators A: Phys 228 (2015), 104–111.
119. [119] Wang, D.A., Chang, K.H., Electromagnetic energy harvesting from flow induced vibration. Microelectron J 41:6 (2010), 356–364.
120. [120] Purcell, E.M., Morin, D.J., Electricity and magnetism. 2013, Cambridge University Press, Cambridge.
121. [121] Wang, D.-A., Chiu, C.-Y., Pham, H.-T., Electromagnetic energy harvesting from vibrations induced by Kármán vortex street. Mechatronics 22:6 (2012), 746–756.
122. [122] Sardini, E., Serpelloni, M., An efficient electromagnetic power harvesting device for low-frequency applications. Sens Actuators A: Phys 172:2 (2011), 475–482.
123. [123] Owens, B.A.M., Mann, B.P., Linear and nonlinear electromagnetic coupling models in vibration-based energy harvesting. J Sound Vib 331:4 (2012), 922–937.
124. [124] Saha, C.R., O'Donnell, T., Wang, N., McCloskey, P., Electromagnetic generator for harvesting energy from human motion. Sens Actuators A: Phys 147:1 (2008), 248–253.
125. [125] Mann, B.P., Sims, N.D., Energy harvesting from the nonlinear oscillations of magnetic levitation. J Sound Vib 319:1–2 (2009), 515–530.
126. [126] Lee C, Stamp D, Kapania NR, Mur-Miranda JO. Harvesting Vibration Energy Using Nonlinear Oscillations of an Electromagnetic Inductor. 2010.
127. [127] Berdy, D.F., Valentino, D.J., Peroulis, D., Kinetic energy harvesting from human walking and running using a magnetic levitation energy harvester. Sens Actuators A: Phys 222 (2015), 262–271.
128. [128] Bouendeu, E., Greiner, A., Smith, P.J., Korvink, J.G., A low-cost electromagnetic generator for vibration energy harvesting. Sens J IEEE 11:1 (2011), 107–113.
129. [129] Arroyo, E., Badel, A., Electromagnetic vibration energy harvesting device optimization by synchronous energy extraction. Sens Actuators A: Phys 171:2 (2011), 266–273.
130. [130] Dayal, R., Dwari, S., Parsa, L., A new design for vibration-based electromagnetic energy harvesting systems using coil inductance of microgenerator. Ind Appl, IEEE Trans on 47:2 (2011), 820–830.
131. [131] Arroyo, E., Badel, A., Formosa, F., Energy harvesting from ambient vibrations: electromagnetic device and synchronous extraction circuit. J Intell Mater Syst Struct, 2013.
132. [132] Bin, Y., Chengkuo, L., Wenfeng, X., Jin, X., Johnny Han, H., Rama Krishna, K., et al. Electromagnetic energy harvesting from vibrations of multiple frequencies. J Micromech Microeng, 19(3), 2009, 035001.
133. [133] Chae, S.H., Ju, S., Choi, Y., Jun, S., Park, S.M., Lee, S., et al. Electromagnetic vibration energy harvester using springless proof mass and ferrofluid as a lubricant. J Phys: Conf Ser, 476(1), 2013, 012013.
134. [134] Asai, T., Araki, Y., Ikago, K., Energy harvesting potential of tuned inertial mass electromagnetic transducers. Mech Syst Signal Process 84:Part A (2017), 659–672.
135. [135] Tashiro, R., Kabei, N., Katayama, K., Ishizuka, Y., Tsuboi, F., Tsuchiya, K., Development of an electrostatic generator that harnesses the motion of a living body. Use of a resonant phenomenon. JSME Int J Ser C Mech Syst Mach Elem Manuf 43:4 (2000), 916–922.
136. [136] Tashiro, R., Kabei, N., Katayama, K., Tsuboi, E., Tsuchiya, K., Development of an electrostatic generator for a cardiac pacemaker that harnesses the ventricular wall motion. J Artif Organs 5:4 (2002), 0239–0245.
137. [137] Bartsch U, Trautmann A, Ruther P, Gaspar J, Paul O. Electrostatic transducers for micro energy harvesting based on SOI technology. in: Solid-state sensors, actuators and microsystems conference, 2007. TRANSDUCERS 2007. International. 2007.
138. [138] Despesse G, Jager T, Jean-Jacques C, Léger J-M, Vassilev, A, Basrour S, et al. Fabrication and characterization of high damping electrostatic micro devices for vibration energy scavenging. Proceedings design, test, integration and packaging of MEMS and MOEMS. 2005. p. 386–90.
139. [139] Ma, W., Rufer, L., Zohar, Y., Wong, M., Ieee, Design and implementation of an integrated floating-gate electrostatic power micro-generator. Transducers'05 digest of technical papers, 1 and 2, 2005, Ieee, New York, 299–302.
140. [140] Naruse, Y., Matsubara, N., Mabuchi, K., Izumi, M., Suzuki, S., Electrostatic micro power generation from low-frequency vibration such as human motion. J Micromech Microeng, 19(9), 2009, 094002.
141. [141] Yuji, S., Daigo, M., Masato, E., Makoto, H., A MEMS electret generator with electrostatic levitation for vibration-driven energy-harvesting applications. J Micromech Microeng, 20(10), 2010, 104002.
142. [142] Sterken, T., Fiorini, P., Baert, K., Borghs, G., Puers, R., Novel design and fabrication of a MEMS electrostatic vibration scavenger. Proc Power, 2004, 18–21.
143. [143] Lallart, M., Pruvost, S., Guyomar, D., Electrostatic energy harvesting enhancement using variable equivalent permittivity. Phys Lett A 375:45 (2011), 3921–3924.
144. [144] Wang, F., Hansen, O., Electrostatic energy harvesting device with out-of-the-plane gap closing scheme. Sens Actuators A: Phys 211 (2014), 131–137.
145. [145] Kubba, A.E., Behroozi, M., Olatunbosun, O.A., Anthony, C., Jiang, K., Modeling of strain energy harvesting in pneumatic tires using piezoelectric transducer. Tire Sci Technol 42:1 (2014), 16–34.
146. [146] Singh, K.B., Bedekar, V., Taheri, S., Priya, S., Piezoelectric vibration energy harvesting system with an adaptive frequency tuning mechanism for intelligent tires. Mechatronics 22:7 (2012), 970–988.
147. [147] Li, P., Zuo, L., Assessment of vehicle performances with energy-harvesting shock absorbers. SAE Int J Passeng Cars - Mech Syst 6:1 (2013), 18–27.
148. [148] Zuo, L., Zhang, P.-S., Energy harvesting, ride comfort, and road handling of regenerative vehicle suspensions. J Vib Acoust, 135(1), 2013 [11002].
149. [149] Zhongjie, L., Lei, Z., Jian, K., George, L., Energy-harvesting shock absorber with a mechanical motion rectifier. Smart Mater Struct, 22(2), 2013, 025008.
150. [150] Zhongjie, L., Lei, Z., Luhrs, G., Liangjun, L., Yi-Xian, Q., Electromagnetic energy-harvesting shock absorbers: design, modeling, and road tests. Veh Technol, IEEE Trans on 62:3 (2013), 1065–1074.
151. [151] Xiao, H., Wang, X., John, S., A dimensionless analysis of a 2DOF piezoelectric vibration energy harvester. Mech Syst Signal Process 58–59 (2015), 355–375.
152. [152] Xiao, H., Wang, X., John, S., A multi-degree of freedom piezoelectric vibration energy harvester with piezoelectric elements inserted between two nearby oscillators. Mech Syst Signal Process 68–69 (2016), 138–154.
153. [153] Harne, R.L., Development and testing of a dynamic absorber with corrugated piezoelectric spring for vibration control and energy harvesting applications. Mech Syst Signal Process 36:2 (2013), 604–617.
154. [154] Zhou, S., Cao, J., Erturk, A., Lin, J., Enhanced broadband piezoelectric energy harvesting using rotatable magnets. Appl Phys Lett, 102(17), 2013, 173901.
155. [155] Zhou, S., Cao, J., Inman, D.J., Lin, J., Liu, S., Wang, Z., Broadband tristable energy harvester: modeling and experiment verification. Appl Energy 133 (2014), 33–39.
156. [156] Zhou, S., Cao, J., Lin, J., Wang, Z., Exploitation of a tristable nonlinear oscillator for improving broadband vibration energy harvesting. Eur Phys J Appl Phys, 67, 2014, 30902.
157. [157] Cao, J., Wang, W., Zhou, S., Inman, D.J., Lin, J., Nonlinear time-varying potential bistable energy harvesting from human motion. Appl Phys Lett, 107(14), 2015, 143904.
158. [158] Cao, J., Zhou, S., Inman, D., Chen, Y., Chaos in the fractionally damped broadband piezoelectric energy generator. Nonlinear Dyn 80:4 (2015), 1705–1719.
159. [159] Shengxi, Z., Junyi, C., Wei, W., Shengsheng, L., Jing, L., Modeling and experimental verification of doubly nonlinear magnet-coupled piezoelectric energy harvesting from ambient vibration. Smart Mater Struct, 24(5), 2015, 055008.
160. [160] Zhou, S., Cao, J., Inman, D.J., Liu, S., Wang, W., Lin, J., Impact-induced high-energy orbits of nonlinear energy harvesters. Appl Phys Lett, 106(9), 2015, 093901.
161. [161] Lan, C., Qin, W., Enhancing ability of harvesting energy from random vibration by decreasing the potential barrier of bistable harvester. Mech Syst Signal Process 85 (2017), 71–81.
162. [162] Tang, L., Yang, Y., A nonlinear piezoelectric energy harvester with magnetic oscillator. Appl Phys Lett, 101(9), 2012, 094102.
163. [163] Vocca, H., Neri, I., Travasso, F., Gammaitoni, L., Kinetic energy harvesting with bistable oscillators. Appl Energy 97 (2012), 771–776.
164. [164] Cohen, N., Bucher, I., Feldman, M., Slow-fast response decomposition of a bi-stable energy harvester. Mech Syst Signal Process 31 (2012), 29–39.
165. [165] Wu, H., Tang, L., Yang, Y., Soh, C.K., Development of a broadband nonlinear two-degree-of-freedom piezoelectric energy harvester. J Intell Mater Syst Struct, 2014.
166. [166] Andò, B., Baglio, S., Bulsara, A.R., Marletta, V., A bistable buckled beam based approach for vibrational energy harvesting. Sens Actuators A: Phys 211 (2014), 153–161.
167. [167] Arrieta, A.F., Delpero, T., Bergamini, A.E., Ermanni, P., Broadband vibration energy harvesting based on cantilevered piezoelectric bi-stable composites. Appl Phys Lett, 102(17), 2013, 173904.
168. [168] Arrieta, A.F., Hagedorn, P., Erturk, A., Inman, D.J., A piezoelectric bistable plate for nonlinear broadband energy harvesting. Appl Phys Lett, 97(10), 2010, 104102.
169. [169] Ma, T.-W., Zhang, H., Xu, N.-S., A novel parametrically excited non-linear energy harvester. Mech Syst Signal Process 28 (2012), 323–332.
170. [170] Xiaoya, Z., Shiqiao, G., Haipeng, L., Yanwei, G., Effects of introducing nonlinear components for a random excited hybrid energy harvester. Smart Mater Struct, 26(1), 2017, 015008.
171. [171] White, N.M., Glynne-Jones, P., Beeby, S.P., A novel thick-film piezoelectric micro-generator. Smart Mater Struct, 10(4), 2001, 850.
172. [172] Tao, K., Miao, J., Lye, S.W., Hu, X., Sandwich-structured two-dimensional MEMS electret power generator for low-level ambient vibrational energy harvesting. Sens Actuators A: Phys 228 (2015), 95–103.
173. [173] Muralt, P., Marzencki, M., Belgacem, B., Calame, F., Basrour, S., Vibration energy harvesting with PZT micro device. Procedia Chem 1:1 (2009), 1191–1194.
174. [174] Lee, B.S., Lin, S.C., Wu, W.J., Wang, X.Y., Chang, P.Z., Lee, C.K., Piezoelectric MEMS generators fabricated with an aerosol deposition PZT thin film. J Micromech Microeng, 19(6), 2009, 065014.
175. [175] Jeon, Y.B., Sood, R., Jeong, Jh, Kim, S.G., MEMS power generator with transverse mode thin film PZT. Sens Actuators A: Phys 122:1 (2005), 16–22.
176. [176] Reilly, E.K., Wright, P.K., Modeling, fabrication and stress compensation of an epitaxial thin film piezoelectric microscale energy scavenging device. J Micromech Microeng, 19(9), 2009, 095014.
177. [177] Chen, G., Meng, Q., Fu, H., Bao, J., Development and experiments of a micro piezoelectric vibration energy storage device. Mech Syst Signal Process 40:1 (2013), 377–384.
178. [178] Morimoto, K., Kanno, I., Wasa, K., Kotera, H., High-efficiency piezoelectric energy harvesters of c-axis-oriented epitaxial PZT films transferred onto stainless steel cantilevers. Sens Actuators A: Phys 163:1 (2010), 428–432.
179. [179] Wu, X., Lee, D.-W., Magnetic coupling between folded cantilevers for high-efficiency broadband energy harvesting. Sens Actuators A: Phys 234 (2015), 17–22.
180. [180] Bai, X., Wen, Y., Li, P., Yang, J., Peng, X., Yue, X., Multi-modal vibration energy harvesting utilizing spiral cantilever with magnetic coupling. Sens Actuators A: Phys 209 (2014), 78–86.
181. [181] Torres, E.O., Rincon-Mora, G.A., Electrostatic energy-harvesting and battery-charging CMOS system prototype. Circuits Syst I: Regul Pap IEEE Trans on 56:9 (2009), 1938–1948.
182. [182] Miyazaki M, Tanaka H, Ono G, Nagano T, Ohkubo N, Kawahara T, et al. Electric-energy generation using variable-capacitive resonator for power-free LSI: efficiency analysis and fundamental experiment. In: Low power electronics and design, 2003. ISLPED '03. Proceedings of the 2003 international symposium on. 2003.
183. [183] Tsutsumino T, Suzuki Y, Kasagi N, Sakane Y. Seismic power generator using high-performance polymer electret. In: Micro electro mechanical systems. 2006. MEMS 2006 Istanbul. 19th IEEE international conference on. 2006.
184. [184] Feenstra, J., Granstrom, J., Sodano, H., Energy harvesting through a backpack employing a mechanically amplified piezoelectric stack. Mech Syst Signal Process 22:3 (2008), 721–734.
185. [185] Xie, L., Cai, M., Increased energy harvesting and reduced accelerative load for backpacks via frequency tuning. Mech Syst Signal Process 58–59 (2015), 399–415.
186. [186] Romero-Ramirez, E., Energy harvesting from body motion using rotational micro-generation. 2010, Michigan Technological University, Michigan.
187. [187] Mitcheson, P.D., Yeatman, E.M., Rao, G.K., Holmes, A.S., Green, T.C., Energy harvesting From human and machine motion for wireless electronic devices. Proc IEEE 96:9 (2008), 1457–1486.
188. [188] Zahid Kausar, A.S.M., Reza, A.W., Saleh, M.U., Ramiah, H., Energizing wireless sensor networks by energy harvesting systems: scopes, challenges and approaches. Renew Sustain Energy Rev 38 (2014), 973–989.
189. [189] Li, Q., Naing, V., Donelan, J.M., Development of a biomechanical energy harvester. J Neuroeng Rehabil 6:1 (2009), 1–12.
190. [190] Gilbert, J.M., Balouchi, F., Comparison of energy harvesting systems for wireless sensor networks. Int J Autom Comput 5:4 (2008), 334–347.
191. [191] Kawamoto, Y., Suda, Y., Inoue, H., Kondo, T., Electro-mechanical suspension system considering energy consumption and vehicle manoeuvre. Veh Syst Dyn 46:Suppl.1 (2008), S1053–S1063.
192. [192] Goldner RB, Zerigian P, Hull JR. A preliminary study of energy recovery in vehicles by using regenerative magnetic shock absorbers. SAE International. 2001.
193. [193] Nelson CA, Platt SR,Albrecht D, Kamarajugadda V, Fateh M. Power Harvesting for Railroad Track Health Monitoring Using Piezoelectric and Inductive Devices. 2008.
194. [194] Wang JJ, Penamalli GP, Lei Z. Electromagnetic energy harvesting from train induced railway track vibrations. In: Mechatronics and embedded systems and applications (MESA) IEEE/ASME international conference on. 2012.
195. [195] Pourghodrat A, Nelson CA, Hansen SE, Kamarajugadda V, Platt SR. Power harvesting systems design for railroad safety. Pro Inst Mech Eng Part F: J Rail Rapid Transit. 2013.
196. [196] Ung C, Moss SD, Vandewater LA, Galea SC, Chiu WK, Crew G. Energy harvesting from heavy haul railcar vibrations. In: Intelligent sensors, sensor networks and information processing IEEE proceedings of the eighth international conference on. 2013.
197. [197] Rostami, A.B., Armandei, M., Renewable energy harvesting by vortex-induced motions: review and benchmarking of technologies. Renew Sustain Energy Rev 70 (2017), 193–214.
198. [198] Steven, R.A., Henry, A.S., A review of power harvesting using piezoelectric materials (2003–2006). Smart Mater Struct, 16(3), 2007, R1.
199. [199] Lei, W., Yuan, F.G., Vibration energy harvesting by magnetostrictive material. Smart Mater Struct, 17(4), 2008, 045009.
200. [200] Lee, C.S., Joo, J., Han, S., Lee, J.H., Koh, S.K., Poly (vinylidene fluoride) transducers with highly conducting poly (3,4-ethylenedioxythiophene) electrodes. Synth Met 152:1–3 (2005), 49–52.
201. [201] Morita, T., Miniature piezoelectric motors. Sens Actuators A: Phys 103:3 (2003), 291–300.
202. [202] de Araujo, M.V.V., Nicoletti, R., Electromagnetic harvester for lateral vibration in rotating machines. Mech Syst Signal Process 52–53 (2015), 685–699.
203. [203] Wang L. Vibration Energy Harvesting by Magnetostrictive Material for Powering Wireless sensors. 2007. [ProQuest].
204. [204] Jing, Xingjian, Lang, Ziqiang, Frequency domain analysis and design of nonlinear systems based on volterra series expansion. 2015, Springer International Publishing, Switzerland.