On the role of nonlinearities in vibratory energy harvesting: A critical review and discussion

Applied Mechanics Reviews

Volumn 66, Issue 4, 2014, Pages

  Daqaq, Mohammed F ^a   Masana, Ravindra ^a   Erturk, Alper ^b   Quinn, D Dane ^c  

^a AMRL   (United States)

^b GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^c The University of Akron   (United States)

Author keywords

bistable; energy harvesting; low frequency; monostable; nonlinear; piecewise linear

Indexed keywords

BANDWIDTH; PIECEWISE LINEAR TECHNIQUES;

BISTABLES; LOW FREQUENCY; MONOSTABLE; NONLINEAR; PIECEWISE LINEAR;

ENERGY HARVESTING;

EID: 84899825755     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4026278     Document Type: Review

References (119)

1. Gregori, S., Li, Y., Li, H., Liu, J., and Maloberti, F., 2004, "2.45 GHz Power and Data Transmission for a Low-Power Autonomous Sensors Platform," International Symposium on Low Power Electronics and Design, ISLPED 04, pp. 269-273.
2. Kim, J. W., Takao, H., Sawada, K., and Ishida, M., 2007, "Integrated Inductors for RF Transmitters in CMOS/MEMS Smart Microsensor Systems," Sensors, 7, pp. 1387-1398.
3. Bracke, W., Merken, P., Puers, R., and Van Hoof, C., 2007, "Generic Architectures and Design Methods for Autonomous Sensors," Sens. Actuators A, 135, pp. 881-888.
4. Baerta, K., Gyselinckxa, B., Torfsa, T., Leonova, V., Yazicioglua, F., Brebelsa, S., Donnaya, S., Vanfleterena, J., Beyna, E., and Van Hoof, C., 2006, "Technologies for Highly Miniaturized Autonomous Sensor Networks," Microelectron. J., 37, pp. 1563-1568.
5. Paradiso, J. A., and Starner, T., 2005, "Energy Scavenging for Mobile and Wireless Electronics," IEEE Pervas. Comput., 4, pp. 18-27.
6. Sodano, H., Inman, D. J., and Park, G., 2004, "A Review of Power Harvesting From Vibration Using Piezoelectric Materials," Shock Vib. Dig., 36, pp. 197-205.
7. Sodano, H., Inman, D. J., and Park, G., 2005, "Generation and Storage of Electricity From Power Harvesting Devices," J. Intell. Mater. Syst. Struct., 16, pp. 67-75.
8. Roundy, S., 2005, "On the Effectiveness of Vibration-Based Energy Harvesting," J. Intell. Mater. Struct., 16, pp. 809-823.
9. Sanders, R. S., and Lee, M. T., 1995, "Implantable Pacemakers," Proc. IEEE, 84, pp. 480-486.
10. Karami, M. A., and Inman, D. J., 2012, "Powering Pacemakers From Heartbeat Vibrations Using Linear and Nonlinear Energy Harvesters," Appl. Phys. Lett., 100(4), p. 042901.
11. Capel, I. D., Dorrell, H. M., Spencer, E. P., and Davis, M. W., 2003, "The Amelioration of the Suffering Associated With Spinal Cord Injury With Subperception Transcranial Electrical Stimulation," Spinal Cord, 41, pp. 109-117.
12. Renzenbrink, G., and Jzerman, M. J., 2004, "Percutaneous Neuromuscular Electrical Stimulation for Treating Shoulder Pain in Chronic Hemiplegia. Effects on Shoulder Pain and Quality of Life," Clin. Rehab, 18, pp. 359-365.
13. Iskos, D., Lurie, K., Sakaguchi, S., and Benditt, D., 1997, "Termination of Implantable Pacemaker Therapy: Experience in Five Patients," Ann. Intern. Med., 126, pp. 787-790.
14. Wardhana, K., and Hadipriono, F., 2003, "Analysis of Recent Bridge Failures in the United States," J. Perform. Construct. Facil., 17, pp. 144-150.
15. Elvin, N., Lajnef, N., and Elvin, A., 2006, "Feasibility of Structural Monitoring With Vibration Powered Sensors," Smart Mater. Struct., 15, pp. 977-986.
16. Galchev, T. V., McCullagh, J., Peterson, R. L., and Najafi, K., 2011, "Harvesting Traffic-Induced Vibrations for Structural Health Monitoring of Bridges," J. Micromech. Microeng., 21(10), p. 104005.
17. Johnson, J. B., 1928, "Thermal Agitation of Electricity in Conductors," Phys. Rev., 32, pp. 97-109.
18. Yu, P., Yuan, Y., and Xu, J., 2002, "Study of Double Hopf Bifurcation and Chaos for an Oscillator With Time-Delayed Feedback," Commun. Nonlinear Sci. Numer. Simul., 7, p. 69.
19. Chau, H. L., and Wise, K. D., 1987, "Noise Due to Brownian Motion in Ultrasensitive Solid-State Pressure Sensors," IEEE Trans. Electron Devices, 34, pp. 859-865.
20. Roundy, S., and Zhang, Y., 2005, "Toward Self-Tuning Adaptive Vibration-Based Micro-Generators," Smart Materials, Nano- and Micro-Smart Systems, Sydney, Australia.
21. Wu, W., Chen, Y., Lee, B., He, J., and Peng, Y., 2006, "Tunable Resonant Frequency Power Harvesting Devices," Proceedings of Smart Structures and Materials Conference, SPIE, San Diego, CA, p. 61690A.
22. Challa, V., Prasad, M., Shi, Y., and Fisher, F., 2008, "A Vibration Energy Harvesting Device With Bidirectional Resonance Frequency Tunability," Smart Mater. Struct., 75, pp. 1-10.
23. Shahruz, S. M., 2006, "Design of Mechanical Band-Pass Filters for Energy Scavenging," J. Sound Vib., 292, pp. 987-998.
24. Shahruz, S. M., 2006, "Limits of Performance of Mechanical Band-Pass Filters Used in Energy Harvesting," J. Sound Vib., 294, pp. 449-461.
25. Baker, J., Roundy, S., and Wright, P., 2005, "Alternative GeOmetries for Increasing Power Density in Vibration Energy Scavenging for Wireless Sensors," Proceedings of the Third International Energy Conversion Conference, San Francisco, CA, pp. 959-970.
26. Rastegar, J., Pereira, C., and Nguyen, H. L., 2006, "Piezoelectric- Based Power Sources for Harvesting Energy From Platforms With Low Frequency Vibrations," Proceedings of Smart Structures and Materials Conference, SPIE, San Diego, CA, p. 617101.
27. Nayfeh, A. H., 1973, Perturbation Methods, Wiley Interscience, New York.
28. Triplett, A., and Quinn, D. D., 2009, "The Effect of Non-linear Piezoelectric Coupling on Vibration-Based Energy Harvesting," J. Intell. Mater. Syst. Struct., 20(16), pp. 1959-1967.
29. Mann, B. P., and Sims, N. D., 2008, "Energy Harvesting From the Nonlinear Oscillations of Magnetic Levitation," J. Sound Vib., 319, pp. 515-530.
30. Gammaitoni, L., Neri, I., and Vocca, H., 2009, "Nonlinear Oscillators for Vibration Energy Harvesting," Appl. Phys. Lett., (16), p. 164102.
31. Wickenheiser, A. M., and Garcia, E., 2010, "Broadband Vibration-Based Energy Harvesting Improvement Through Frequency Up-Conversion by Magnetic Rectfication," Smart Mater. Struct., 19(6), p. 065020.
32. Masana, R., and Daqaq, M. F., 2011, "Electromechanical Modeling and Nonlinear Analysis of Axially Loaded Energy Harvesters," ASME J. Vib. Acoust., 133(1), p. 011007.
33. Mann, B. P., Barton, D. A. W., and Owen, B., 2012, "Uncertainty in Performance for Linear and Nonlinear Energy Harvesting Strategies," J. Intell. Mater. Syst. Struct., 23, pp. 1451-1460.
34. Erturk, A., and Inman, D., 2008, "A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters," ASME J. Vib. Acoust., 130, p. 041002.
35. Stanton, S. C., Erturk, A., Mann, B. P., Dowell, E. H., and Inman, D. J., 2012, "Nonlinear Nonconservative Behavior and Modeling of Piezoelectric Energy Harvesters Including Proof Mass Effects," J. Intell. Mater. Syst. Struct., 23, pp. 183-199.
36. Daqaq, M. F., 2012, "On Intentional Introduction of Stiffness Nonlinearities for Energy Harvesting Under White Gaussian Excitations," Nonlinear Dyn., 69, pp. 1063-1079.
37. Hu, Y., Xue, H., Yang, J., and Jiang, Q., 2006, "Nonlinear Behavior of a Piezoelectric Power Harvester Near Resonance," IEEE Trans. Ultrason., Ferroelectr. Freq. Control, 53(7), pp. 1387-1391.
38. Elvin, N., and Elvin, A., 2012, "Large Deflection Effects in Flexible Energy Harvesters," J. Intell. Mater. Syst. Struct., 23, pp. 1475-1484.
39. Stanton, S. C., Erturk, A., Mann, B. P., and Inman, D. J., 2010, "Nonlinear Piezoelectricity in Electroelastic Energy Harvesters: Modeling and Experimental Identification," J. Appl. Phys., 108(7), p. 074903.
40. Karami, M. A., and Inman, D. J., 2011, "Equivalent Damping and Frequency Change for Linear and Nonlinear Hybrid Vibrational Energy Harvesting Systems," J. Sound Vibr., 330(23), pp. 5583-5597.
41. Nayfeh, A. H., and Mook, D. T., 1979, Nonlinear Oscillations, Wiley-Interscience, New York.
42. Strogatz, S. H., 1994, Nonlinear Dynamics and Chaos: With Applications to Physics, Biology, Chemistry, and Engineering (Studies in Nonlinearity), Perseus, Cambridge, UK.
43. Szemplinska-Stupnicka, W., 2003, Chaos, Bifurcations and Fractals Around Us, World Scientific, Singapore.
44. Beeby, S. P., Torah, R. N., Tudor, M. J., Glynne-Jones, P., O'Donnell, T., Saha, C. R., and Roy, S., 2007, "A Micro Electromagnetic Generator for Vibration Energy Harvesting," J. Micromech. Microeng., 17(7), p. 1257.
45. Quinn, D., Vakakis, D., Alexander, F., and Bergman, L. A., 2007, "Vibration-Based Energy Harvesting With Essential Nonlinearities," 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007, pp. 779-786.
46. Burrow, S. G., and Clare, L. R., 2007, "A Resonant Generator With Non-Linear Compliance for Energy Harvesting in High Vibrational Environments," IEEE International Electric Machines Drives Conference, 2007, IEMDC'07, Vol. 1, pp. 715-720.
47. Barton, D. A.W., Burrow, S. G., and Clare, L. R., 2010, "Energy Harvesting From Vibrations With a Nonlinear Oscillator," ASME J. Vib. Acoust., 132(2), p. 021009.
48. Stanton, S. C., McGehee, C. C., and Mann, B. P., 2010, "Nonlinear Dynamics for Broadband Energy Harvesting: Investigation of a Bistable Piezoelectric Inertial Generator," Phys. D, 239, pp. 640-653.
49. Sebald, G., Kuwano, H., Guyomar, D., and Ducharne, B., 2011, "Experimental Duffing Oscillator for Broadband Piezoelectric Energy Harvesting," Smart Mater. and Struct., 20(10), p. 102001.
50. Marinkovic, B., and Koser, H., 2009, "Smart Sand-A Wide Bandwidth Vibration Energy Harvesting Platform," Appl. Phys. Lett., 94(10), p. 103505.
51. Tvedt, L. G. W., Nguyen, D. S., and Halvorsen, E., 2010, "Nonlinear Behavior of an Electrostatic Energy Harvester Under Wide- and Narrowband Excitation," J. Microelectromech. Syst., 19(2), pp. 305-316.
52. Miki, D., Honzumi, M., Suzuki, Y., and Kasagi, N., 2010, "Large-Amplitude MEMS Electret Generator With Nonlinear Springs," 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS), pp. 176-179.
53. Nguyen, D. S., Halvorsen, E., Jensen, G. U., and Vogl, A., 2010, "Fabrication and Characterization of a Wideband MEMS Energy Harvester Utilizing Nonlinear Springs," J. Micromech. Microeng., 20(12), p. 125009.
54. Quinn, D. D., Triplett, A. L., Vakakis, A. F., and Bergman, L. A., 2011, "Energy Harvesting From Impulsive Loads Using Intentional Essential Nonlinearities," ASME J. Vib. Acoust., 133(1), p. 011004.
55. Quinn, D. D., Triplett, A. L., Bergman, L. A., and Vakakis, A. F., 2011, "Comparing Linear and Essentially Nonlinear Vibration-Based Energy Harvesting," ASME J. Vib. Acoust., 133(1), p. 011001.
56. Sebald, G., Kuwano, H., Guyomar, D., and Ducharne, B., 2011, "Simulation of a Duffing Oscillator for Broadband Piezoelectric Energy Harvesting," Smart Mater. Struct., 20(7), p. 075022.
57. Gammaitoni, L., Cottone, F., Neri, I., and Vocca, H., 2009, "Noise Harvesting," AIP Conf. Proc., 1129(1), pp. 651-654.
58. Daqaq, M. F., 2010, "Response of Uni-Modal Duffing Type Harvesters to Random Forced Excitations," J. Sound Vibr., 329, pp. 3621-3631.
59. Daqaq, M. F., 2011, "Transduction of a Bistable Inductive Generator Driven by White and Exponentially Correlated Gaussian Noise," J. Sound Vibr., 330(11), pp. 2554-2564.
60. Halvorsen, E., 2013, "Fundamental Issues in Nonlinear Wide-Band Vibration Energy Harvesting," Phys. Rev. E, 87, p. 042129.
61. Green, P. L., Worden, K., Atalla, K., and Sims, N. D., 2012, "The Benefits of Duffing-Type Nonlinearities and Electrical Optimisation of a Mono-stable Energy Harvester Under White Gaussian Excitations," J. Sound Vibr., 331, pp. 4504-4517.
62. He, Q., and Daqaq, M. F., 2013, "Load Optimization of a Nonlinear Mono-Stable Duffing-Type Harvester Operating in a White Noise Environment," Proceedings of the ASME 2013 International Design Engineering Technical Conference and Computers and Information in Engineering Conference, IDETC/CIE 2013, Portland, OR.
63. Nguyen, S. D., and Halvorsen, E., 2011, "Nonlinear Springs for Bandwidth-Tolerant Vibration Energy Harvesting," J. Microelectromech. Syst., 20(6), pp. 1225-1227.
64. Lee, C., Stamp, D., Kapania, N. R., and Mur Miranda, J. O., 2010, "Harvesting Vibration Energy Using Nonlinear Oscillations of An Electromagnetic Inductor," Proceedings of the 2010 SPIE Conference on Smart Structures/NDE, San Diego, CA.
65. Daqaq, M. F., Stabler, C., Qaroush, Y., and Seuaciuc-Osório, T., 2009, "Investigation of Power Harvesting via Parametric Excitations," J. Intell. Mater. Syst. Struct., 20(5), pp. 545-557.
66. Abdelkefi, A., Nayfeh, A., and Hajj, M., 2012, "Global Nonlinear Distributed-Parameter Model of Parametrically Excited Piezoelectric Energy Harvesters," Nonlinear Dyn., 67, pp. 1147-1160.
67. Ma, T., Xu, N., and Zhang, H., 2010, "A Nonlinear Method for Harvesting Mechanical Energy From Vibrations," Proceedings of the 12th Biennial International Conference on Engineering, Construction, and Operations in Challenging Environments and Fourth NASA/ARO/ASCE Workshop on Granular Materials in Lunar and Martian Exploration, Honolulu, HI, March 14-17.
68. Daqaq, M. F., and Bode, D., 2011, "Exploring the Parametric Amplification Phenomenon for Energy Harvesting," Proc. Inst. Mech. Eng., Part I, 225(4), pp. 456-466.
69. McInnes, C., Gorman, D., and Cartmell, M., 2008, "Enhanced Vibrational Energy Harvesting Using Nonlinear Stochastic Resonance," J. Sound Vibr., 318, pp. 655-662.
70. Benzi, R., Parisi, G., Sutera, A., and Vulpiani, A., 1982, "Stochastic Resonance in Climatic Change," Tellus, 34(1), pp. 10-16.
71. Longtin, A., 1993, "Stochastic Resonance in Neuron Models," J. Stat. Phys., 70(1), pp. 309-327.
72. Gammaitoni, L., Marchesoni, F., Menichella-Saetta, E., and Santucci, S., 1989, "Stochastic Resonance in Bistable Systems," Phys. Rev. Lett., 62(4), pp. 349-352.
73. Gammaitoni, L., Hänggi, P., Jung, P., and Marchesoni, F., 1998, "Stochastic Resonance," Rev. Mod. Phys., 70, pp. 223-287.
74. Badzey, R. L., and Mohanty, P., 2005, "Coherent Signal Amplification in Bistable Nanomechanical Oscillators by Stochastic Resonance," Nature, 437(7061), pp. 995-998.
75. Cottone, F., Vocca, H., and Gammaitoni, L., 2009, "Nonlinear Energy Harvesting," Phys. Rev. Lett., 102, p. 080601.
76. Erturk, A., Hoffmann, J., and Inman, D. J., 2009, "A Piezomagnetoelastic Structure for Broadband Vibration Energy Harvesting," Appl. Phys. Lett., 94(25), p. 254102.
77. Moon, F. C., and Holmes, P. J., 1979, "A Magnetoelastic Strange Attractor," J. Sound Vibr., 65, pp. 275-296.
78. Masana, R., and Daqaq, M. F., 2009, "Relative Performance of a Vibratory Energy Harvester in Mono- and Bi-stable Potentials," J. Sound Vibr., 330(24), pp. 6036-6052.
79. Sneller, A. J., Cette, P., and Mann, B. P., 2011, "Experimental Investigation of a Post-buckled Piezoelectric Beam With An Attached Central Mass Used to Harvest Energy," Proc. Inst. Mech. Eng., Part I, 225(4), pp. 497-509.
80. Friswell, M., Ali, S. F., Bilgen, O., Adhikari, S., Lees, A., and Litak, G., 2012, "Nonlinear Piezoelectric Vibration Energy Harvesting From a Vertical Cantilever Beam With Tip Mass," J. Intell. Mater. Syst. Struct., 23(13), pp. 1505-1521.
81. Arietta, A. F., Hagedorn, P., Erturk, A., and Inman, D. J., 2010, "A Piezoelectric Bistable Plate for Nonlinear Broadband Energy Harvesting," Appl. Phys. Lett., 97(10), p. 104102.
82. Hyer, M. W., 1981, "Some Observations on the Curved Shape of Thin Unsymmetric Laminates," J. Compos. Mater., 15(2), pp. 175-194.
83. Mann, B. P., and Owens, B. A., 2010, "Investigations of a Nonlinear Energy Harvester With a Bistable Potential Well," J. Sound Vibr., 329, pp. 1215-1226.
84. Ando, B., Baglio, S., Trigona, C., Dumas, N., Latorre, L., and Nouet, P., 2010, "Nonlinear Mechanism in MEMS Devices for Energy Harvesting Applications," J. Micromech. Microeng., 20(12), p. 125020.
85. Nguyen, S. D., Halvorsen, E., and Paprotny, I., 2013, "Bistable Springs for Wideband Microelectromechanical Energy Harvesters," Appl. Phys. Lett., 102(2), p. 023904.
86. Masana, R., and Daqaq, M. F., 2012, "Energy Harvesting in the Superharmonic Frequency Region of a Twin-well Oscillator," J. Appl. Phys., 111(4), p. 044501.
87. Ferrari, M., Bau, M., Guizzetti, M., and Ferrari, V., 2011, "A Single-Magnet Nonlinear Piezoelectric Converter for Enhanced Energy Harvesting From Random Vibrations," Sens. Actuators A, 172(1), pp. 287-292.
88. Ferrari, M., Ferrari, V., Guizzetti, M., Ando, B., Baglio, S., and Trigona, C., 2010, "Improved Energy Harvesting From Wideband Vibrations by Nonlinear Piezoelectric Converters," Sens. Actuators A, 162(2), pp. 425-431.
89. Litak, G., Friswell, M. I., and Adhikari, S., 2010, " Magnetopiezoelastic Energy Harvesting Driven by Random Excitations," Appl. Phys. Lett., 96(21), p. 214103.
90. Lin, J., Lee, B., and Alphenaar, B., 2010, "The Magnetic Coupling of a Piezoelectric Cantilever for Enhanced Energy Harvesting Efficiency," Smart Mater. Struct., 19(4), p. 045012.
91. Cammarano, A., Burrow, S. G., and Barton, D. A. W., 2011, "Modelling and Experimental Characterization of an Energy Harvester With Bi-Stable Compliance Characteristics," Proc. Inst. Mech. Eng., Part I, 225(4), pp. 475-484.
92. Ali, S. F., Adhikari, S., Friswell, M. I., and Narayanan, S., 2011, "The Analysis of Piezomagnetoelastic Energy Harvesters Under Broadband Random Excitations," J. Appl. Phys., 109(7), p. 074904.
93. Erturk, A., and Inman, D. J., 2011, "Broadband Piezoelectric Power Generation on High-Energy Orbits of The Bistable Duffing Oscillator With Electromechanical Coupling," J. Sound Vibr., 330(10), pp. 2339-2353.
94. Erturk, A., and Inman, D. J., 2011, Piezoelectric Energy Harvesting, Wiley-Interscience, New York.
95. Stanton, S., Owen, B., and Mann, B., 2012, "Harmonic Balance Analysis of the Bistable Piezoelectric Inertial Generator," J. Sound Vibr., 331, pp. 3617-3627.
96. Stanton, S., Mann, B., and Owen, B., 2012, "Melnikov Theoretic Methods for Characterizing the Dynamics of a Bistable Piezoelectric Inertial Generator in Complex Spectral Environments," Phys. D, 241, pp. 711-720.
97. Harne, R. L., Thota, M., and Wang, K. W., 2013, "Concise and High-Fidelity Predictive Criteria for Maximizing Performance and Robustness of Bistable Energy Harvesters," Appl. Phys. Lett., 102, p. 053903.
98. Khovanova, N. A., and Khovanov, I. A., 2011, "The Role of Excitations Statistic and Nonlinearity in Energy Harvesting From Random Impulsive Excitations," Appl. Phys. Lett., 99(14), p. 144101.
99. Neri, I., Travasso, F., Vocca, H., and Gammaitoni, L., 2011, "Nonlinear Noise Harvesters for Nanosensors," Nano Commun. Netw., 2(4), pp. 230-234.
100. Litak, G., Borowiec, M., Friswell, M. I., and Adhikari, S., 2011, "Energy Harvesting in a Magnetopiezoelastic System Driven by Random Excitations With Uniform and Gaussian Distributions," J. Theor. Appl. Mech., 49, pp. 757-764.
101. Zhao, S., and Erturk, A., 2013, "On the Stochastic Excitation of Monostable and Bistable Electroelastic Power Generators: Relative Advantages and Tradeoffs in a Physical System," J. Appl. Phys., 102, p. 103902.
102. Masana, R., and Daqaq, M. F., "Performance of a Duffing-Type Harvester in a Stochastic Environment," J. Sound Vibr. (submitted).
103. Green, P. L., Papatheou, E., and Sims, N. D., 2013, "Energy Harvesting From Human Motion and Bridge Vibrations: An Evaluation of Current Nonlinear Energy Harvesting Solutions," J. Intell. Mater. Syst. Struct., 24, pp. 1494-1505.
104. Soliman, M., Abdel-Rahman, E. M., El-Saadany, E. F., and Mansour, R. R., 2008, "A Wideband Vibration-Based Energy Harvester," J. Micromech. Microeng., 18, p. 115021.
105. Soliman, M., Abdel-Rahman, E. M., El-Saadany, E. F., and Mansour, R. R., 2009, "A Design Procedure for Wideband Micropower Generators," J. Microelectromech. Syst., 18, pp. 1288-1299.
106. Hoffmann, D., Folkmer, B., and Manoli, Y., 2009, "Fabrication, Characterization and Modelling of Electrostatic Micro-Generators," J. Micromech. Microeng., 19, p. 094001.
107. Le, C. P., Halvorsen, E., Srasen, O., and Yeatman, E. M., 2012, "Microscale Electrostatic Energy Harvester Using Internal Impacts," J. Intell. Mater. Syst. Struct., 23(13), pp. 1409-1421.
108. Blystad, L. C. J., and Halvorsen, E., 2012, "A Piezoelectric Energy Harvester With a Mechanical End Stop on One Side," Microsyst. Technol., 17(4), pp. 259-262.
109. Liu, H., Tay, C. J., Quan, C., Kobayashi, T., and Lee, C., 2011, "Piezoelectric MEMS Energy Harvester for Low-Frequency Vibrations With Wideband Operation Range and Steadily Increased Output Power," J. Microelectromech. Syst., 20(5), pp. 1131-1142.
110. Sousa, V. C. de M. Anicezio, M., De Marqui, Jr., C., and Erturk, A., 2011, "Enhanced Aeroelastic Energy Harvesting by Exploiting Combined Nonlinearities: Theory and Experiment," Smart Mater. Struct., 20(9), p. 094007.
111. du Toit, N., and Wardle, B., 2007, "Experimental Verification of Models for Microfabricated Piezoelectric Energy Harvesters," AIAA J., 45, pp. 1126-1137.
112. Stanton, S. C., Erturk, A., Mann, B. P., and Inman, D. J., 2010, "Resonant Manifestation of Intrinsic Nonlinearity Within Electroelastic Micropower Generators," Appl. Phys. Lett., 97(25), p. 254101.
113. Owens, B. A. M., and Mann, B. P., 2012, "Linear and Nonlinear Electromagnetic Coupling Models in Vibration-Based Energy Harvesting," J. Sound Vibr., 331(4), pp. 922-937.
114. Crawley, E. F., and Anderson, E. H., 1990, "Detailed Models of Piezoceramic Actuation of Beams," J. Intell. Mater. Syst. Struct., 1, pp. 4-25.
115. Renno, J. M., Daqaq, M. F., and Inman, D. J., 2009, "On the Optimal Energy Harvesting From a Vibration Source," J. Sound Vibr., 320(1-2), pp. 386-405.
116. Anton, S. R., Erturk, A., and Inman, D. J., 2012, "Bending Strength of Piezoelectric Ceramics and Single Crystals for Multifunctional Load-Bearing Applications," IEEE Trans. Ultrason., Ferroelectr., Freq. Control, 59, pp. 1085-1092.
117. Abdelkefi, A., Nayfeh, A., and Hajj, M., 2012, "Effects of Nonlinear Piezoelectric Coupling on Energy Harvesters Under Direct Excitation," Nonlinear Dyn., 67, pp. 1221-1232.
118. Harne, R. L., Thota, M., and Wang, K. W., 2013, "Steady-State Dynamics of a Two Degree-of-Freedom Bistable Oscillator for Energy Harvesting," Proceedings of the 2013 SPIE Conference on Smart Structures/NDE, San Diego, CA.
119. Oueini, S. S., Chin, C.-M., and Nayfeh, A. H., 1999, "Dynamics of a Cubic Nonlinear Vibration Absorber," Nonlinear Dyn., 20, pp. 283-295.