High moisture strength of cassava starch/polyvinyl alcohol-compatible blends for the packaging and agricultural sectors

Journal of Polymer Research

Volumn 22, Issue 10, 2015, Pages

  Guimarães, Mario ^a   Botaro, Vagner Roberto ^b   Novack, Kátia Monteiro ^c   Teixeira, Fábio Gomes ^d   Tonoli, Gustavo Henrique Denzin ^e  

^a CENTRO FEDERAL DE EDUCAÇÃO TECNOLÓGICA DE MINAS GERAIS   (Brazil)

^b FEDERAL UNIVERSITY OF SÃO CARLOS   (Brazil)

^c FEDERAL UNIVERSITY OF OURO PRETO   (Brazil)

^d INSTITUTO DE TECNOLOGIA DE ALIMENTOS   (Brazil)

^e FEDERAL UNIVERSITY OF LAVRAS   (Brazil)

Author keywords

Agricultural sector; Biodegradable polymers; Blends; Plastic packages

Indexed keywords

AGRICULTURE; BIODEGRADABLE POLYMERS; BIOFILMS; BLENDING; PLANTS (BOTANY); STARCH;

AGRICULTURAL SECTOR; GOOD COMPATIBILITY; PLASTIC PACKAGES; POLY (VINYL ALCOHOL) (PVA); POLYMER CONCENTRATIONS; POLYMERIC MIXTURES; STRUCTURAL AND MORPHOLOGICAL PROPERTIES; WATER VAPOR PERMEABILITY;

POLYMER BLENDS;

EID: 84942026269     PISSN: 10229760     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10965-015-0834-z     Document Type: Article

References (118)

1. Mohanty AK, Misra M, Hinrichsen G (2000) Biofibers, biodegradable polymers and biocomposites: An overview. Macromol Mater Eng 276–277:1–24
2. Yu L, Dean K, Li L (2006) Polymer blends and composites from renewable resources. Prog Polym Sci 31:576–602
3. Ray SS, Bousmina M (2005) Biodegradable polymers and their silicate nanocomposites: In greening the 21st century materials world. Prog Mater Sci 50:962–1079
4. Voet D, Voet JG, Pratt CW (2006) Fundamentos de Bioquímica, 3rd edn. Artes Médicas, Porto Alegre
5. Liu Z (2005) Edible films and coatings from starches. In: Han JH (ed) Innovations in food packaging. Elsevier Academic Press, Oxford, pp 318–337
6. Thunwall M, Kuthanova V, Boldizar A, Rigdahl M (2008) Film blowing ofthermoplastic starch. Carbohydr Polym 71:583–590
7. Taghizadeh A, Favis BD (2012) Effect of High Molecular Weight Plasticizer sonthe Gelatinization of Starch under Static and Shear Conditions. Carbohydr Polym 92:1799–1808
8. Muller CMO, Yamashita F, Laurindo JB (2008) Evaluation of the effects glycerol and sorbitol concentration and water activity on the water barrier properties of cassava starch films through a solubility approach. Cabohydr Polym 72:82–87
9. Brannock GR, Barlow JW, Paul DR (1991) Blends of Styrene/Maleic Anhydride Copolymers with Polymethacrylates. J Polym Sci Polym Phys 29:413–429
10. Ning W, Jiugao Y, Xiaofei M, Ying W (2007) The influence of citric acid on the properties of thermoplastics starch/linear low-sdensity polyethylene blends. Carbohydr Polym 67:446–453
11. Ning W, Jiugao Y, Xiaofei M, Chunmei H (2009) Properties of extruded glycerol and formamide-plasticized corn starch. J Thermoplast Compos 22:273–291
12. Cassagnau P, Bounor-Legaré V, Fenouilloy F (2007) Reactive of thermoplastic polymers: review of the fundamental aspect. Int Polym Process 22:218–258
13. Khan MA, Bhattacharia SK, Kader MA, Bahari K (2006) Preparation and characterization of ultra violet (UV) radiation cured bio-degradable films of sago starch/PVA blend. Carbohydr Polym 63:500–506
14. Guimarães JL, Wypych F, Saul CK, Ramos LP, Satyanarayana KG (2010) Studies of the processing and characterization of corn starch and its composites with banana and sugarcane fibers from Brazil. Carbohydr Polym 80:130–138
15. Mondragan M, Arroyo K, Romero-Garcia J (2008) Biocomposites of thermoplastic starch with surfactant. Carbohydr Polym 74:201–208
16. Prachayawarakorn J, Ruttanabus P, Boonsom P (2011) Effect of cotton fiber contents and lengths on properties of thermoplastic starch composites prepared from rice and waxy rice starches. J Polym Environ 19:274–282
17. Fang JM, Fowler PA, Escrig C, Gonzalez R, Costa JA, Chamudis L (2005) Development of biodegradable laminate films derived from naturally occuring carbohydrate polymers. Carbohydr Polym 60:39–42
18. Hernadez-Muñoz P, López-Rubio A, Lagarón JM, Gavara R (2004) Formaldehyde cross-link of gliadin films: effects on mechanical and water barrier properties. Biomacromolecules 5:415–421
19. Orliac O, Rovilly A, Silvestre F, Rigal L (2002) Effects of additives on the mechanical properties, hydrophobicity and water uptake of thermo-moulded films produced from sunflower protein isolate. Polymer 43:5417–5425
20. Ciesla K, Salmieris S, Lacro M, Le Tien C (2004) Gamma irradiation influence on physical properties of milk proteins. Radiat Phys Chem 71:95–99
21. Micardi V, Belamri R, Morel M, Guilbert S (2000) Properties of chemically and Physically treated whet gluten films. J Agric Food Chem 48:2948–2953
22. Espert A (2005) Strategies for improving mechanical properties of polypropylene/cellulose composites. In: Fibre and Polymer Technology. The Royal Institute os Technology: Stockholm
23. Shirai MA, Grossmann NVE, Mali S, Yamashita F, Garcia PS, Muller CMO (2013) Development of biodegradable flexible films of starch and poly (lactic acid) plasticized with adipate or citrate esters. Carbohydr Polym 92:19–22
24. Nobrega MM, Olivato JB, Muller CMO, Yamashita F (2013) Addition of satured fatty acids in biodegradable films: effect on the crystalinity and viscoelastic characteristics. J Polym Environ 21:166–171
25. Bocchini S, Battegazzore D, Frache A (2010) Poly (butylensuccinate-co-adipate) thermoplastic starch nanocomposite blends. Carbohydr Polym 82:802–808
26. Reis KC, Pereira J, Smith AC, Carvalho CWP, Wellner N, Yakimets I (2008) Characterization of polyhidroxibutirate-hidroxyvalerate (PHB-HV) maize starch blend films. J Food Eng 89:361–369
27. Godbole S, Gote S, Latckar M, Chakrabarti T (2003) Preparation and characterization of biodegradable poly-3-hydroxybutirate-starch blend films. Bioresour Technol 86:33–37
28. Rosa DS, Guedes CGF, Pedroso AG, Calil MR (2004) The influence of starch gelatinization on the rheological, termal and morphological properties of poly (S-capralactone) with corn starch blends. Mater Sci Eng C 24:663–667
29. Chen Y, Cao X, Chang PR, Huneault MA (2008) Comparative study on the films of poly (vinyl alcohol)/pea starch nanocrystals and poly (vinyl alcohol)/native pea starch. Carbohydr Polym 73:8–17
30. Sin LT, Rahman WAWA, Rahmat AR, Mokhtar M (2011) Determination of thermal stability and activation energy of polyvinyl alcohol–cassava starch blends. Carbohydr Polym 83:303–305
31. Rahat AR, Rahman WAWA, Sin LT, Yussuf AA (2009) Approaches to improve compatibility of starch filled polymer system: a review. Mater Sci Eng C 29:2370–2377
32. Ishihara M (2002) Photo-crosslinkable chitosan hydrogel as a wound dressing and a biological adhesive. Trends Glycosci Glycotechnol 14:331–341
33. Marques AP, Reis RL, Hunt JA (2002) The biocompatibility of novel starch-based polymers and composites: in vitro studies. Biomaterials 23:1471–1478
34. Paul DR, Newman S (1978) Polymers Blends, vol 1. Academic Press Inc, New York
35. Kalambur S, Rizvi S (2006) An overview of starch-based plastic blends from reactive extrusion. J Plast Film Sheet 22:39–58
36. Wurzburg OB (1989) Cross-linking starches. In: Wurzburg OB Modified starches: properties and uses. CRC Press, Florida, pp 41–53
37. Boobio FO, Bobbio PA (1985) Capítulo I: Carboidratos, In: Introdução à Química de Alimentos, Fundação Cargil, Ed. XV, 306 p
38. American Society for Testing and Materials (2000) Standard Test Methods for Tensile Properties of Thin Plastic Sheeting. ASTM D882, Philadelphia
39. Choi WS, Han JH (2001) Physical and mechanical properties os pea-protein-based edible films. J Food Sci 66:319–322
40. Kampeerapappun P, Aht-Ong D, Pentrakoon D, Srikulkit K (2007) Preparation of cassava starch/montmorillonite composite film. Carbohydr Polym 67:155–163
41. Bilbao-Sainz C, Bras J, Williams T, Sénechal T, Orts W (2011) HPMC reinforced with different cellulose nano-particles. Carbohydr Polym 86:1549–1557
42. Park S, Zhao Y (2004) Incorporation of a high concentration of mineral or vitamin into chitosan-based films. J Agric Food Chem 52:1933–1939
43. Bourtoon T, Chinnan MS (2008) Preparation and properties of rice starch/chitosan blend biodegradable film. LWT Food Sci Technol 41:1633–1641
44. Tetens VO (1930) Uber einige meteorologische. Begriffe. Z-Geophys 6:297–309
45. Gontard N, Duchez C, Cuq J, Guilbert S (1994) Edible composite films of wheat gluten and lipids: water vapour permeability and other physical properties. Int J Food Sci Technol 29:39–50. doi:10.1111/j.1365-2621.1994.tb02045.x
46. Muscat D, Adhikari B, Chudhary DS (2012) Comparative study of film forming behavior of low and high amylose starches using glycerol and xylitol platicizers. J Food Eng 109:189–201
47. Rindlav A, Hulleman SHD, Gatenholm P (1997) Formation of starch filμs with varying crystallinity. Carbohydr Polym 34:25–30
48. Zullo R, Iannace S (2009) The effects of different starch sources and plasticizers on film blowing of thermoplastic starch; correlation among process, elongational properties and macromolecular. Carbohydr Polym 77:376–383
49. Fang JM, Fowler PA, Tomkinson J, Hill CAS (2002) The preparation and characterization of a series of chemically modified potato starches. Carbohydr Polym 47:245–252
50. Jayasekara R, Harding I, Bowater I, Chrystie GBY, Lonergan GT (2004) Preparation, surface modification and characterization of solution cast starch PVA blended films. Polym Test 23:17–27
51. Elizondo NJ (2007) Propriedades mecânicas e de barreira, solubilidade e microestrutura de filmes de farinha de amaranto modificada com epicloridrina ou misturada com poli (vinil álcool). 2007, 133p. Dissertação (Mestrado em Engenharia de Alimentos) – Faculdade de Engenharia de Alimentos, UNICAMP, Campinas, São Paulo
52. Zhang L, Wang Y, Liu H, Yu L, Liu X, Chen L, Zhang N (2013) Developing hydroxypropyl methylcelluose/hydroxypropyl starch blends for use as capsule materials. Carbohydr Polym 98:73–79
53. Prasad P, Guru GS, Shivakumar HR, Rai KS (2008) Miscibility, thermal, and mechanical studies of hydroxypropyl methylcellulose/pullulan blends. J Appl Polym Sci 110:444–452
54. Celanese (2002) Celvol poly (vinyl alcohol): A versatile high-performance polymer. Disponível em: http://www.docstoc.com/docs/142379523/Celvol%C2%AE-Polyvinyl-Alcohol-A-Versatile-High-Performance-Polymer. Acesso em out. 2014. Celanese Chemicals
55. Aoi K, Seki T, Okada M, Sato H, Shin-Ichi M, Ohtani H, Tsuge S, Shiogai Y (2000) Synthesis of a movel N-selective ester functionalized chitin derivative and water-soluble carboxyethylchitin. Macromol Chem Phys 201:1701–1708
56. Mya M, Iwamoto R, Mima S (1984) FT-IR study of intermolecular interactions in polymer blends. J Polym Sci Polym Phys Ed 22:1149–1151
57. Heliodoro VFM (2013) Estudo das propriedades físico-químicas de filmes de amido e blendas amido/látex: propriedades térmicas e de transporte de vapor de vapor de água. 2013, 85p. Dissertação (Mestrado em Química) – Instituto de Química, UFU, Uberlândia, Minas Gerais
58. Sudhammani SR, Prasad MS, Sankar KU (2003) DSC and FTIR studies on gellan an Polyvinyl alcohol (PVA) blend films. Food Hydrocoll 17:245–250
59. Barbani N, Bertoni F, Ciardelli G, Cristalinni C, Silvestri D, Coluccio ML, Giusti P (2005) Bioartificial materials baased on blends of dextran and poly (vinyl alcohol-co-acrylic acid). Eur Polym J 41:3004–3010
60. Srinivasa PC, Ramesh MN, Kumar KR, Tharanathan RN (2003) Properties and sorption studies of chitosan-polyvinyl alcohol blend films. Carbohydr Polym 53:431–438
61. Ramaraj B (2006) Modified poly (vinyl alcohol) and coconut shell powder composite films: Physico-mechanical, thermal properties, and swelling studies. Polym-Plast Technol 45:1227–1231
62. Teixeira EM, Curvelo AAS, Correa AC, Marconcini JM, Glenn GM, Mattoso LHC (2012) Properties of thermoplastic starch from cassava bagasse and cassava starch and their blends with poly (lactic acid). Ind Crop Prod 37:61–68
63. Sreekumar PA, Mamdouh AA, De SK (2012) Studies on compatibility of biodegradable starch/polyvinyl alcohol blends. Polym Eng Sci 52:2167–2172
64. Cyras VP, Manfredi LB, Ton-That MT, Vázquez A (2008) Physical and mechanical properties of thermoplastic starch/montmorillonite nanocomposites films. Carbohydr Polym 73:55–63
65. Almasi H, Ghanbarzadeh B, Entezami AA (2010) Physicochemical properties of starch-CMC-nanoclay biodegradable films. Int J Biol Macromol 46:1–5
66. Lawton JW (1996) Effect of starch type on the preperties of starch containing film. Carbohydr Polym 29:203–208
67. Sin LT, Rahman WAWA, Rahmat AR, Morad NA, Salleh MSS (2010) A study of specific heat capacity functions of polyvinyl alcohol-cassava starch blends. Int J Thermophys 31:525–534
68. Follain N, Joly C, Dole P, Bliard C (2005) Properties of starch based blends. Part 2. Influence of poly vinyl alcohol addition and photocrosslinking on starch based materials mechanical properties. Carbohydr Polym 60:185–192
69. Azahari NA, Othman N, Ismail H (2011) Biodegradation Studies of Polyvinyl Alcohol/Corn Starch Blend Films in Solid and Solution Media. J Phys Sci 22:15–31
70. Zhang Y, Han JH (2006) Mechanical and thermal characteristics of pea starch films plasticized with monosaccharides and polyols. J Food Sci 71:109–118
71. Parvin F, Rahman A, Islan JMM, Khan MA, Saadat AHM (2010) Preparation and characterization of starch/PVA blend for biodegradable packaging material. Adv Mater Res 123–125:351–354
72. Averous L (2004) Biodegradable multiphase systems based on plasticized starch – Part C: Polymers reviews. J Macromol Sci 44:231–274
73. Auras R, Harte B, Selke S (2004) An overview of polylactides as packaging materials. Macormol Biosci 4:835–864
74. Sobral PJA (2000) Influência da espessura de biofilmes feitos a base de proteínas miofibrilares sobre suas propriedades funcionais. Pesq Agrop Brasileira 35:1251–1259
75. Ayuk JE, Mathew AP, Oksman K (2009) The Effect of Plasticizer and Cellulose Nanowhisker Content on the Dispersion and Properties of Cellulose Acetate Butyrate Nanocomposites. J Appl Polym Sci 114:2723–2730
76. Garg S, Jana AK (2011) Characterization and evaluation of acylated starch with different acyl groups and degrees of substitution. Carbohydr Polym 83:1623–1630
77. Elomaa M, Asplund T, Soininen P, Laatikainen R, Peltonec S, Hyyarinen SL, Urtti A (2004) Determination of the degree of substitution of acetylated starch by hydrolysis, 1H NMR and TGA/IR. Carbohydr Polym 57:261–267
78. Xu YX, Dzenis Y, Hanna MA (2005) Water solubility, thermal characteristics and biodegradability of extruded starch acetate foams. Ind Crop Prod 21:361–368
79. Galdeano MC, Grossmann MVE, Mali S, Bello-Perez LA, Garcia MA, Zamudio-Flores PB (2009) Effects of production process and plasticizers on stability of films and sheets of oat starch. Mater Sci Eng C 29:492–498
80. Luo X, Li J, Lin X (2012) Effect of gelatinization and additives on morphology and thermal behavior of corn starch/PVA blend films. Carbohydr Polym 90:1595–1600
81. Shi QF, Chen C, Gao L, Jiao L, Xu HY, Guo WH (2011) Physical and degradation properties of binary or ternary blends composed of poly (lactic acid), thermoplastic starch and GMA grafted POE. Polym Degrad Stab 96:175–182
82. Liu XX, Yu L, Liu HS, Chen L, Li L (2008) In situ thermal decomposition of starch with constant moisture in a sealed system. Polym Degrad Stab 93:260–262
83. Gaspar M, Benko Z, Dogossy G, Reczey K, Czigany T (2005) Reducing water absorption in compostable starch-based plastics. Polym Degrad Stab 90:563–569
84. Sakanaka LS (2007) Confecção Filmes biodegradáveis por extrusão de blendas de amido termoplástico e polibutileno succinato co-adipato (PBSA). Tese de doutorado (Doutorado em Ciência de alimentos) – Universidade Estadual de Londrina. Londrina
85. Sarantópoulos CGL, Oliveira LM, Padula M, Coltro L, Alves RMV, Garcia EEC (2002) Embalagens Plásticas Flexíveis – Principais Polímeros e Avaliação de Propriedades. CETEA/ITAL, Campinas
86. Chen H (1995) Functional properties and applications of edible films made of milk proteins. J Dairy Sci 78:2563–2583
87. Mali S, Grossmann MVE, García MA, Martino MN, Zaritzky NE (2004) Barrier, mechanical an optical properties of plasticized yam starch films. Carbohydr Polym 56:129–135
88. Chandra R, Rustgi R (1998) Biodegradable polymers. Prog Polym Sci 23:1273–1335
89. Ortega-Toro R, Jimenez A, Talens P, Chiralt A (2014) Films de almidón termoplástico. Influência de la incorporacion de hidroxipropil-metil-celulosa y acido cítrico. Rev Bio Agro 12:134–141
90. Funke U, Bergthaller W, Lindhauer MG (1998) Processing and characterization of biodegradable products based on starch. Polym Degrad Stab 59:293–296
91. Limpan N, Prodpran T, Benjakul S, Prasarpran S (2012) Influences of degree of hydrolysis and molecular weight of poly (vinyl alcohol) (PVA) on properties of fish myofibrillar protein/PVA blend films. Food Hydrocoll 29:226–233
92. Cuq B, Gontard N, Guilbert S (1998) Proteins as agricultural polymers for packaging production. Cereal Chem 75:1–9
93. American Society for Testing and Materials, Standard (2000) Test Methods for Water Vapor Transmission of Materials. ASTM E96, Philadelphia
94. Mao LJ, Imam S, Gordon S, Cinelli P, Chiellini E (2000) Extruded cornstarch–glycerol–polyvinyl alcohol blends: Mechanical properties, morphology and biodegradability. J Polym Environ 8:205–211
95. Hagenmaier RD, Shaw PE (1990) Moisture permeability of edible films made with fatty acid and (hydroxypropyl) methylcellulose. J Agric Food Chem 38:1799–1803
96. Butler BL, Vergano PJ, Testin RF, Bunn JM, Wiles JL (1996) Mechanical and barrier properties of edible chitosan films as affected by composition and storage. J Food Sci 61:953 e–955
97. Copeland L, Blazek J, Salman J, Tang MC (2009) Form and functionality of starch. Food Hydrocoll 23:1527–1534
98. Brandelero RPH (2010) Filmes biodegradáveis de amido e poli (butileno adipato cotereftalato) (PBAT) adicionados de surfactante e óleo de soja. 2010.Tese (Doutorado em Ciências de Alimentos) - Universidade Estadual de Londrina. Londrina, PR
99. Canevarolo Junior SV (2006) Ciência dos Polímeros: um texto básico para Tecnólogos e Engenheiros, 2nd edn. ArtLiber Editora, São Paulo, 275p
100. Park HJ, Chinnan MS (1995) Gas and water vapor barrier properties of edible films from protein and cellulosic materials. J Food Eng 25:497–507
101. Schwartzberg HG (1986) Modeling of gas vapor transport through hydrophilic films. In: Mathlouthi M (ed) Food packaging and preservation. Elservier Science Publishing Co., New York, pp 115–135
102. Su JF, Huang Z, Zhao YH, Yuan XY, Wang XY, Li M (2010) Moisture sorption and water vapor permeability of soy protein isolate/poly (vinyl alcohol)/glycerol blend films. Ind Crop Prod 31:266–276
103. Dang KM, Yoksan R (2015) Development of thermoplastic starch blown film by incorporating plasticized chitosan. Carbohydr Polym 115:575–581
104. Moreira FKV (2010) Desenvolvimento de nanocompósitos poliméricos biodegradáveis a partir de pectina, amido e nanofibras de celulose. Dissertação (Mestrado em Ciência e Engenharia de Materiais) – Porgrama de Pós-Graduação em Ciência e Engenharia de Materiais. Universidade Federal de São Carlos – Ufscar, São Paulo, SP
105. Averou F, Bouquillon N (2004) Biocomposites based on plasticized starch: thermal and mechanical behaviors. Carbohydr Polym 56:111–122
106. Laboulfie F, Hemati M, Lamure A, Diguet S (2013) Effect of the plasticizer on permeability, mechanical resistance and thermal behavior of composite coating films. Powder Technol 238:14–19
107. Petersen K, Nielsen PV, Olsen MB (2001) Physical and mechanical properties of biobased materials: starch, polylactate and polyhydroxybutyrate. Starch-Starke 53:356–361
108. Stuchell YM, Krochta JM (1994) Enzymatic treatments and termal effects on edible soy protein films. J Food Sci 59:1322–1337
109. Mchugh TH, Krochta JM (1994) Sorbitol-vs glycerol-plasticized whey protein edible films: integrated oxygen permeability and tensile property evaluation. J Agric Food Chem 42:841–845
110. Miller KS, Krochta JM (1997) Oxygen and aroma barrier properties of edible films: a review. Food Sci Technol 8:228–237
111. Chiumarelli M, Hubinger MD (2012) Stability, solubility, mechanical and barrier properties of cassava starch – Carnauba wax edible coatings to preserve fresh-cut apples. Food Hydrocoll 28:59–67
112. Mehyar GF, Han JH (2004) Physical and mechanical properties of high amylose rice and pea starch films as affected by relative humidity. J Food Sci 69:449–454
113. Exama A, Arul J, Lencki RW, Lee LZ, Toupin C (1993) Suitability of plastics films for modified atmosphere packing of fruits and vegetables. J Food Sci 58:1365–1370
114. Duncan TV (2011) Applications of nanotechnology in food packaging and food safety: barrier materials, antimicrobials and sensors. J Colloid Interface Sci 363:1–24. doi:10.1016/j.jcis.2011.07.017
115. Halley P, Rutgers R, Coombs S, Kettels J, Gralton J, Christie G, Jenkins M, Beh H, Griffin K, Jayasekara R, Lonergan G (2001) Developing biodegradable much films from starch-based polymers. Starch-Starke 53:362–367
116. Bilck AP, Grossmann MVE, Yamashita F (2010) Biodegradable mulch films for strawberry production. Polym Test 29:471–476
117. Silva PL (2010) Desenvolvimento de blendas de amido de inhame modificado com quitosana e PVA. Dissertação (Mestrado em Química) – Programa de Pós-Graduação em Química – Universidade Federal do Ceará, Fortaleza, CE
118. Sarantópoulos CIGL, Oliveira ML, Canavesi E (2001) Requisitos de conservação de alimentos em embalagens flexíveis. CETEA/ITAL, Campinas, 215p