Marginal adaptation of zirconium dioxide copings: Influence of the CAD/CAM system and the finish line design

Journal of Prosthetic Dentistry

Volumn 112, Issue 2, 2014, Pages 155-162

  Euán, Raúl ^a   Figueras Álvarez, Oscar ^a   Cabratosa Termes, Josep ^a   Oliver Parra, Rogelio ^b  

^a UNIVERSIDAD AUTÓNOMA DE NUEVO LEÓN   (Mexico)

^b UNIVERSIDAD AUTÓNOMA DE TAMAULIPAS   (Mexico)

Author keywords

[No Author keywords available]

Indexed keywords

DENTAL MATERIAL; ZIRCONIUM; ZIRCONIUM OXIDE;

CHEMISTRY; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; DENTAL IMPRESSION; DENTAL PROCEDURE; DENTAL SURGERY; DENTAL TECHNOLOGY; ENDODONTICS; HUMAN; MATERIALS TESTING; PROCEDURES; SURFACE PROPERTY; TOOTH CROWN; TOOTH PROSTHESIS;

COMPUTER-AIDED DESIGN; CROWNS; DENTAL IMPRESSION TECHNIQUE; DENTAL MARGINAL ADAPTATION; DENTAL MATERIALS; DENTAL MODELS; DENTAL PROSTHESIS DESIGN; HUMANS; MATERIALS TESTING; SURFACE PROPERTIES; TECHNOLOGY, DENTAL; TOOTH PREPARATION, PROSTHODONTIC; ZIRCONIUM;

EID: 84905216595     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.prosdent.2013.10.012     Document Type: Article

References (56)

1. M. Abbate, A. Tjan, and W. Fox Comparison of the marginal fit of various ceramic crown systems J Prosthet Dent 61 1989 527 531
2. I.S. Yeo, J.H. Yang, and J.B. Lee In vitro marginal fit of three all-ceramic crown systems J Prosthet Dent 90 2003 459 464
3. W. Att, F. Komine, T. Gerds, and J.R. Strub Marginal adaptation of three different zirconium dioxide three-unit fixed dental prostheses J Prosthet Dent 101 2009 239 247
4. A.F. Quintas, F. Oliveira, and M.A. Bottino Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines, and luting agents: an in vitro evaluation J Prosthet Dent 92 2004 250 257
5. P. Limkangwalmongkol, E. Kee, G.J. Chiche, and M.B. Blatz Comparison of marginal fit between all-porcelain margin versus alumina-supported margin on Procera alumina crowns J Prosthodont 18 2009 162 166
6. P. Coli, and S. Karlsson Fit of a new pressure-sintered zirconium dioxide coping Int J Prosthodont 17 2004 59 64
7. R. Euán, O. Figueras-Álvarez, J. Cabratosa-Termes, M. Brufau-de Barbera, and S. Gomes-Azevedo Comparison of the marginal adaptation of zirconium dioxide crowns in preparations with two different finish lines J Prosthodont 21 2012 291 295
8. J.R. Holmes, S.C. Bayne, G.A. Holland, and W.D. Sulik Considerations in measurement of marginal fit J Prosthet Dent 62 1989 405 408
9. D.A. Felton, B.E. Kanoy, S.C. Bayne, and G.P. Wirthman Effect of in vivo crown margin discrepancies on periodontal health J Prosthet Dent 65 1991 357 364
10. J.A. Sorensen A rationale for comparison of plaque-retaining properties of crown systems J Prosthet Dent 62 1989 264 269
11. S.E. Sorensen, I.B. Larsen, and K.D. Jörgensen Gingival and alveolar bone reaction to marginal fit of subgingival crown margins Scand J Dent Res 94 1986 109 114
12. P.L. Block Restorative margins and periodontal health: a new look at an old perspective J Prosthet Dent 57 1987 683 689
13. G. Byrne, C.J. Goodacre, R. Dykema, and B.K. Moore Casting accuracy of high-palladium alloys J Prosthet Dent 55 1986 297 301
14. J.Z. Syu, G. Byrne, L.W. Laub, and M.F. Land Influence of finish-line geometry on the fit of crowns Int J Prosthodont 6 1993 25 30
15. U.C. Belser, M.I. MacEntee, and W.A. Richter Fit of three porcelain-fused-to-metal marginal designs in vivo: a scanning electron microscope study J Prosthet Dent 53 1985 24 29
16. P.L. Tan, D.G. Gratton, A.M. Diaz-Arnold, and D.C. Holmes An in vitro comparison of vertical marginal gaps of CAD/CAM titanium and conventional cast restorations J Prosthodont 17 2008 378 383
17. L.H. Lofstrom, and M.M. Barakat Scanning electron microscopic evaluation of clinically cemented cast gold restorations J Prosthet Dent 61 1989 664 669
18. J.W. McLean, and J.A. von Fraunhofer The estimation of cement film thickness by an in vivo technique Br Dent J 131 1971 107 111
19. T. Nakamura, N. Dei, T. Kojima, and K. Wakabayashi Marginal and internal fit of CEREC 3 CAD/CAM all-ceramic crowns Int J Prosthodont 16 2003 244 248
20. P. Coli, and S. Karlsson Precision of a CAD/CAM technique for the production of zirconium dioxide copings Int J Prosthodont 17 2004 577 580
21. Ö. Karataşli, P. Kursoǧlu, N. Çapa, and E. Kazazoǧlu Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systems Dent Mater J 30 2011 97 102
22. J.R. Pereira, K.Y. Murata, A.L. do Valle, J.S. Ghizoni, and F.K. Shiratori Linear dimensional changes in plaster die models using different elastomeric materials Braz Oral Res 24 2010 336 341
23. B.J. Kenyon, M.S. Hagge, C. Leknius, W.C. Daniels, and S.T. Weed Dimensional accuracy of 7 die materials J Prosthodont 14 2005 25 31
24. M.R. Zakira, W.M. Johnson, M.H. Reisbick, and W.V. Campagni The effects of a liquid dispersing agent and a microcrystalline additive on the physical properties of type IV gypsum J Prosthet Dent 60 1988 630 637
25. T.J. Lindquist, C.M. Stanford, and E. Konx Influence of surface hardener on gypsum abrasion resistance and water sorption J Prosthet Dent 90 2003 441 446
26. D.C.N. Chan, A.K.-H. Chung, J. Haines, E.H.-T. Yau, and C.-C. Kuo The accuracy of optical scanning: influence of convergence and die preparation Oper Dent 36 2011 486 491
27. T.F. Alghazzawi, P.R. Liu, and M.E. Essig The effect of different fabrication steps on the marginal adaptation of two types of glass-infiltrated ceramic crown copings fabricated by CAD/CAM technology J Prosthodont 21 2012 167 172
28. S. Rinke, D. Fornefett, N. Gersdorff, Katharina Lange, and M. Roediger Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings Dent Mater J 31 2012 601 609
29. E.A. McLaren All-ceramic alternatives to conventional metal-ceramic restorations Compend Contin Educ Dent 19 1998 307 308
30. J.B. Da Costa, F. Pelogia, B. Hagedorn, and J.L. Ferracane Evaluation of different methods of optical impression making on the marginal gap of onlays created with CEREC3D Oper Dent 35 2010 324 329
31. F. Spear, and J. Holloway Which all-ceramic system is optimal for anterior esthetics? J Am Dent Assoc 139 2008 19S 24S
32. F. Sulaiman, J. Chai, L.M. Jameson, and W.T. Wozniaki A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns Int J Prosthodont 10 1997 478 484
33. P. Schaerer, T. Sato, and A. Wohlwend A comparison of the marginal fit of three cast ceramic crown systems J Prosthet Dent 59 1988 534 542
34. T.A. Hamza, H.A. Ezzat, M.M. El-Hossary, H.A. Katamish, T.E. Shokry, and S.F. Rosenstiel Accuracy of ceramic restorations made with two CAD/CAM systems J Prosthet Dent 109 2013 83 87
35. M. ∅ilo, N.R. Gjerdet, and H.M. Tvinnereim The firing procedure influences properties of a zirconia core ceramic Dent Mater 24 2008 471 475
36. E.A. McLaren, and D.A. Terry CAD/CAM systems, materials and clinical guidelines for all-ceramic crowns and fixed partial dentures Compend Contin Educ Dent 23 2002 637 654
37. O. Schaefer, H. Kuepper, G.A. Thompson, G. Cachovan, A.F. Hefti, and A. Guentsch Effect of CNC-milling on the marginal and internal fit of dental ceramics: a pilot study Dent Mater 29 2013 851 858
38. C. Grenade, A. Mainjot, and A. Vanheusden Fit of single tooth zirconia copings: comparison between various manufacturing processes J Prosthet Dent 105 2011 249 255
39. L. Biscaro, R. Bonfiglioli, M. Soattin, and P. Vigolo An in vivo evaluation of fit of zirconium-oxide based ceramic single crowns, generated with two CAD/CAM systems, in comparison to metal ceramic single crowns J Prosthodont 22 2013 36 41
40. J. Abduo, K. Lyons, and M. Swain Fit of zirconia fixed partial denture: a systematic review J Oral Rehabil 37 2010 866 876
41. G. Bornemann, S. Lemelson, and R. Luthardt Innovative method for the analysis of the internal 3D fitting accuracy of Cerec-3 crowns Int J Comput Dent 5 2002 177 182
42. F. Bauer, J. Schweiger, and D. Edelhoff Digital dentistry: an overview of recent developments for CAD/CAM generated restorations Br Dent J 204 2008 505 511
43. T. Miyazaki, Y. Hotta, J. Kunii, S. Kuriyama, and Y. Tamaki A review of CAD/CAM: current status and future perspectives from 20 years of experience Dent Mater J 28 2009 44 56
44. A. Syrek, G. Reich, D. Ranftl, C.H. Klein, B. Gerny, and J. Brodesser Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling J Dent 38 2010 553 559
45. M.J. Suárez, P. González de Villaumbrosia, G. Pradíes, and J.F.L. Lozano Comparison of the marginal fit of Procera AllCeram crowns with two finish lines Int J Prosthodont 16 2003 229 232
46. E.F. Tsitrou, S.E. Northeast, and R. van Noort Evaluation of the marginal fit of three margin designs of resin composite crowns using CAD/CAM J Dent 35 2007 68 73
47. S. Reich, A. Petschelt, and U. Lohbauer The effect of finish line preparation and layer thickness on the failure load and fractography of ZrO2 copings J Prosthet Dent 99 2008 369 376
48. M.N. Aboushelib Fatigue and fracture resistance of zirconia crowns prepared with different finish line designs J Prosthodont 21 2012 22 27
49. J.R. Gavelis, J.D. Morency, E.D. Riley, and R.B. Sozio The effect of various finish line preparations on the marginal seal and occlusal seat of full crown preparations J Prosthet Dent 45 1981 138 145
50. L. Cho, J. Choi, Y. Yi, and C.J. Park Effect of finish line variants on marginal accuracy and fracture strength of ceramic optimized polymer/fiber-reinforced composite crowns J Prosthet Dent 91 2004 554 560
51. R.O. Assunção, M. Özcan, C.A. Pavanelli, L. Buso, G.H. Leão, and S.M. Araújo et al. Marginal and internal discrepancies related to margin design of ceramic fabricated by a CAD/CAM system J Prosthodont 21 2012 94 100
52. M. Comlekoglu, M. Dundar, M. Özcan, M. Gungor, B. Gokce, and C. Artunc Influence of cervical finish line type on the marginal adaptation of zirconia ceramic crowns Oper Dent 34 2009 586 592
53. K. Richter-Snapp, S.A. Aquilano, C.W. Svare, and K.A. Turner Change in marginal fit as related to margin design, alloy type, and porcelain proximity in porcelain-fused-to-metal restorations J Prosthet Dent 60 1988 435 439
54. G. Byrne Influence of finish-line form on crown cementation Int J Prosthodont 5 1992 137 144
55. J.H. Akbar, C.S. Petrie, M.P. Walker, K. Williams, and J.D. Eick Marginal adaptation of Cerec 3 CAD/CAM composite crowns using two different finish line preparation designs J Prosthodont 15 2006 155 163
56. F. Komine, T. Iwai, K. Kobayashi, and H. Matsumara Marginal and internal adaptation of zirconium dioxide ceramic copings and crowns with different finish line designs Dent Mater J 26 2007 659 664