Marginal and Internal Discrepancies Related to Margin Design of Ceramic Crowns Fabricated by a CAD/CAM System

Journal of Prosthodontics

Volumn 21, Issue 2, 2012, Pages 94-100

  Souza, Rodrigo Othávio Assunção ^a   Özcan, Mutlu ^b   Pavanelli, Carlos Augusto ^c   Buso, Leonardo ^c   Lombardo, Geraldo Henrique Leão ^c   Michida, Silvia Masae Araújo ^c   Mesquita, Alfredo Mikail Melo ^d   Bottino, Marco Antonio ^d  

^a FEDERAL UNIVERSITY OF PARAÍBA   (Brazil)

^b UNIVERSITY OF ZURICH   (Switzerland)

^c SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^d PAULISTA UNIVERSITY   (Brazil)

Author keywords

CAD CAM system; Internal discrepancy; Marginal discrepancy

Indexed keywords

ANALYSIS OF VARIANCE; ARTICLE; COMPUTER AIDED DESIGN; DENTAL IMPRESSION; DENTAL PROCEDURE; DENTAL SURGERY; ENDODONTICS; HISTOLOGY; HUMAN; NONPARAMETRIC TEST; PROSTHESIS; TOOTH CROWN; TOOTH PROSTHESIS;

ANALYSIS OF VARIANCE; COMPUTER-AIDED DESIGN; CROWNS; DENTAL IMPRESSION TECHNIQUE; DENTAL MARGINAL ADAPTATION; DENTAL MODELS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; HUMANS; PROSTHESIS FITTING; REPLICA TECHNIQUES; STATISTICS, NONPARAMETRIC; TOOTH PREPARATION, PROSTHODONTIC;

EID: 84857795655     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2011.00793.x     Document Type: Article

References (48)

1. Heymann HD, Bayne SC, Sturdevant JR, et al: The clinical performance of CAD/CAM-generated ceramics inlays. A four year study. J Am Dent Assoc 1996;127:1171-1181.
2. Bindl A, Mörmann WH: Survival rate of mono-ceramic and ceramic-core CAD/CAM-generated anterior crowns over 2-5 years. Eur J Oral Sci 2004;112:197-204.
3. Kurbad A, Reichel K: Multicolored ceramic blocks as an esthetic solution for anterior restorations. Int J Comput Dent 2006;9:69-82.
4. Mörmann WH: The evolution of the CEREC system. J Am Dent Assoc 2006;137:7-13.
5. Qualtrough AJE, Piddock V: Dental ceramics: what's new? Dent Update 2002;29:25-33.
6. Hung SH, Hung KS, Eidk JD, et al: Marginal fit of porcelain-fused-to-metal ad two types of ceramic crown. J Prosthet Dent 1990;63:26-31.
7. Lim CC, Ironside JG: Grit basting and marginal accuracy of two ceramic veneer systems- A pilot study. J Prosthet Dent 1997;77:359-364.
8. Kokubo Y, Nagayama Y, Tsumita M, et al: Clinical marginal and internal gaps of In-Ceram crowns fabricated using the GN-I system. J Oral Rehabil 2005;32:753-758.
9. Chan C, Weber H: Plaque retention on the teeth restored with full-ceramic crowns: a comparative study. J Prosthet Dent 1986;56:666-671.
10. Knoernschild KL, Campbell SD: Periodontal tissue responses after insertion of artificial crowns and fixed partial dentures. J Prosthet Dent 2000;84:492-498.
11. Löe H: Reactions of marginal periodontal tissues to restorative procedures. Int Dent J 1968;18:759-778.
12. Ørstavik D, Ørstavik J: In vitro attachment of Streptococcus sanguis to dental crown and bridge cements. J Oral Rehabil 1976;3:139-144.
13. Faucher RR, Nicholls JI: Distortion related to margin design in porcelain-fused-to-metal restorations. J Prosthet Dent 1980;43:149-155.
14. Felton DA, Kanoy BE, Bayne SC, et al: Effect of in vivo crown margin discrepancies on periodontal health. J Prosthet Dent 1991;65:357-364.
15. Alkumru H, Hullah WR, Marquis PM, et al: Factors affecting the fit of porcelain jacket crowns. Br Dental J 1988;164:39-43.
16. Tuntiprawon M, Wilson PR: The effect of cement thickness on the fracture strength of all- ceramic crowns. Aust Dent J 1995;40:17-21.
17. Holmes JR, Bayne SC, Holland GA, et al: Considerations in measurement of marginal fit. J Prosthet Dent 1989;62:405-408.
18. Kelly JR, Davis SH, Campbell SD: Nondestructive, three-dimensional internal fit mapping of fixed prostheses. J Prosthet Dent 1989;61:368-373.
19. Boening KW, Wolf BH, Schmidt AE, et al: Clinical fit of Procera allceramic crowns. J Prosthet Dent 2000;84:419-424.
20. Tinschert J, Natt G, Mautsch W, et al: Marginal fit of alumina and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent 2001;26:367-374.
21. Lui JL: The effect of firing shrinkage on the marginal fit of porcelain jacket crowns. Br Dent J 1980;15:43-45.
22. Rinke S, Hüls A, Jahn L: Marginal accuracy and fracture strength of conventional and copy- milled all-ceramic crowns. Int J Prosthodont 1995;8:303-310.
23. Groten M, Axmann D, Pröbster L, et al: Determination of the minimum number of marginal gap measurements required for practical in vitro testing. J Prosthet Dent 2000;83:40-49.
24. Groten M, Girthofer S, Pröbster L: Marginal fit consistency of copy-milled all-ceramic crowns during fabrication by light and scanning electron microscopy analysis in vitro. J Oral Rehabil 1997;24:871-881.
25. Quintas AF, Oliveira F, Bottino MA: Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines and luting agents: An in vitro evaluation. J Prosthet Dent 2004;92:250-257.
26. Oyagüe R Castillo de, Sánchez-Jorge MI, et al: Influence of CAM vs. CAD/CAM scanning methods and finish line of tooth preparation in the vertical misfit of zirconia bridge structures. Am J Dent 2009;22:79-83.
27. Tao J, Han D: The effect of finish line curvature on marginal fit of all-ceramic CAD/CAM crowns and metal-ceramic crowns. Quintessence Int 2009;40:745-752.
28. Beuer F, Aggstaller H, Richter J, et al: Influence of preparation angle on marginal and internal fit of CAD/CAM-fabricated zirconia crown copings. Quintessence Int 2009;40:243-250.
29. Beschnidt SM, Strub JR: Evaluation of the marginal accuracy of different all-ceramic crown system after simulation in the artificial mouth. J Oral Rehabil 1999;26:582-593.
30. Pröbster L, Geis-Gerstorfer, Kirchner E, et al: In vitro evaluation of glass-ceramic restorative material. J Oral Rehabil 1997;24:636-645.
31. Gu X, Kern M: Marginal discrepancies and leakage of all-ceramic crowns: influence of luting agents and aging conditions. Int J Prosthodont 2003;16:109-116.
32. Pera P, Gilodi S, Bassi F, et al: In vitro marginal adaptation porcelain ceramic crowns. J Prosthet Dent 1994;72:585-590.
33. Lin MT, Sy-Muñoz J, Muñoz CA: The effect of tooth preparation form on the fit of Procera copings. Int J Prosthodont 1998;11:580-590.
34. Balkaya MC, Cinar A, Pamuk S: Influence of firing cycles on the distortion of 3 all-ceramic crown systems. J Prosthet Dent 2005;93:346-355.
35. Kohorst P, Brinkmann H, Dittmer MP, et al: Influence of the veneering process on the marginal fit of zirconia fixed dental prostheses. J Oral Rehabil 2010;37:283-291.
36. Tsitrou EA, Northeast SE, Noort R van: Evaluation of the marginal fit of the three margin designs of resin composite crowns using CAD/CAM. J Dent 2007;35:68-73.
37. Christensen GJ: Marginal fit of gold inlay casting. J Prosthet Dent 1966;16:297-305.
38. McLean JW, Fraunhofer JA von: The estimation of cement film thickness by an in vivo technique. Br Dent J 1971;131:107-111.
39. Andersson M, Carlsson L, Persson M, et al: Accuracy of machine milling and spark erosion with a CAD/CAM system. J Prosthet Dent 1996;76:187-193.
40. Bindl A, Windisch S, Mörmann WH: Full-ceramic CAD/CAM anterior crowns and copings. Int J Computer Dent 1999;2:97-111.
41. Mou S, Chai T, Wang J, et al: Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns. J Prosthet Dent 2002;87:248-255.
42. Nakamura T, Dei N, Kojima T, et al: Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns. Int J Prosthodont 2003;16:244-248.
43. Mörmann WH, Bindl A, Lüthy H, et al: Effects of preparation and luting systems on all-ceramic computer-generated crowns. Int J Prosthodont 1998;11:333-339.
44. Zohairy AA El, Gee A De, Mohsen MM, et al: Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater 2003;19:575-583.
45. Attia A, Abdelaziz KM, Freitag S, et al: Fracture load of composite resin and feldspathic ceramic CAD/CAM crowns. J Prosthet Dent 2006;95:117-123.
46. Bindl A, Mörmann WH: Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations. J Oral Rehabil 2005;32:441-447.
47. Sorensen JA, Munksgaard EC: Interfacial gaps of resin cemented ceramic inlays. Eur J Oral Sci 1995;103:116-120.
48. Molin MK, Karlsson SL, Kristiansen MS: Influence of film thickness on joint bend strength of a ceramic/resin composite joint. Dent Mater 1996;12:245-249.