Marginal adaptation of three different zirconium dioxide three-unit fixed dental prostheses

Journal of Prosthetic Dentistry

Volumn 101, Issue 4, 2009, Pages 239-247

  Att, Wael ^a   Komine, Futoshi ^b   Gerds, Thomas ^c   Strub, Jörg Rudolf ^a  

^a UNIVERSITY OF FREIBURG   (Germany)

^b NIHON UNIVERSITY   (Japan)

^c UNIVERSITY OF COPENHAGEN   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOY; TITANIUM; ZIRCONIUM; ZIRCONIUM OXIDE;

ANALYSIS OF VARIANCE; ARTICLE; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; DENTAL CARE; DENTAL SURGERY; DENTURE; ENDODONTICS; HUMAN; MANDIBLE; METHODOLOGY; PROSTHESIS; TOOTH CROWN; TOOTH PROSTHESIS;

ANALYSIS OF VARIANCE; COMPUTER-AIDED DESIGN; CROWNS; DENTAL ABUTMENTS; DENTAL MODELS; DENTAL PORCELAIN; DENTAL RESTORATION FAILURE; DENTAL RESTORATION, PERMANENT; DENTAL STRESS ANALYSIS; DENTURE DESIGN; DENTURE, PARTIAL, FIXED, RESIN-BONDED; HUMANS; MANDIBLE; MARGINAL ADAPTATION (DENTISTRY); METAL CERAMIC ALLOYS; PROSTHESIS FITTING; TITANIUM; ZIRCONIUM;

EID: 62849105654     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(09)60047-0     Document Type: Article

References (45)

1. Raigrodski A.J. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 92 (2004) 557-562
2. Conrad H.J., Seong W.J., and Pesun I.J. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent 98 (2007) 389-404
3. Raigrodski A.J. Contemporary all-ceramic fixed partial dentures: a review. Dent Clin North Am 48 (2004) viii 531-44.
4. Vult von Steyern P., Jönsson O., and Nilner K. Five-year evaluation of posterior all-ceramic three-unit (In-Ceram) FPDs. Int J Prosthodont 14 (2001) 379-384
5. Pröbster L. Survival rate of In-Ceram restorations. Int J Prosthodont 6 (1993) 259-263
6. Sorensen J.A., Kang S.K., Torres T.J., and Knode H. In-Ceram fixed partial dentures: three-year clinical trial results. J Calif Dent Assoc 26 (1998) 207-214
7. Kern M. Clinical long-term survival of two-retainer and single-retainer all-ceramic resin-bonded fixed partial dentures. Quintessence Int 36 (2005) 141-147
8. Mehl A., and Hickel R. Current state of development and perspectives of machine-based production methods for dental restorations. Int J Comput Dent 2 (1999) 9-35
9. Christel P., Meunier A., Heller M., Torre J.P., and Peille C.N. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 23 (1989) 45-61
10. Piconi C., and Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 20 (1999) 1-25
11. Guazzato M., Albakry M., Ringer S.P., and Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 20 (2004) 449-456
12. Vult von Steyern P. All-ceramic fixed partial dentures. Studies on aluminum oxide- and zirconium dioxide-based ceramic systems. Swed Dent J Suppl (2005) 1-69
13. Vult von Steyern P., Carlson P., and Nilner K. All-ceramic fixed partial dentures designed according to the DC-Zirkon technique. A 2-year clinical study. J Oral Rehabil 32 (2005) 180-187
14. Sailer I., Fehér A., Filser F., Gauckler L.J., Lüthy H., and Hämmerle C.H. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont 20 (2007) 383-388
15. Sorensen J.A. A standardized method for determination of crown margin fidelity. J Prosthet Dent 64 (1990) 18-24
16. Felton D.A., Kanoy B.E., Bayne S.C., and Wirthman G.P. Effect of in vivo crown margin discrepancies on periodontal health. J Prosthet Dent 65 (1991) 357-364
17. Knoernschild K.L., and Campbell S.D. Periodontal tissue responses after insertion of artificial crowns and fixed partial dentures. J Prosthet Dent 84 (2000) 492-498
18. Gardner F.M. Margins of complete crowns-literature review. J Prosthet Dent 48 (1982) 396-400
19. Tuntiprawon M., and Wilson P.R. The effect of cement thickness on the fracture strength of all-ceramic crowns. Aust Dent J 40 (1995) 17-21
20. McLean J.W., and von Fraunhofer J.A. The estimation of cement film thickness by an in vivo technique. Br Dent J 131 (1971) 107-111
21. Fransson B., Oilo G., and Gjeitanger R. The fit of metal-ceramic crowns, a clinical study. Dent Mater 1 (1985) 197-199
22. Tinschert J., Natt G., Mautsch W., Spiekermann H., and Anusavice K.J. Marginal fit of alumina- and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent 26 (2001) 367-374
23. Kokubo Y., Ohkubo C., Tsumita M., Miyashita A., Vult von Steyern P., and Fukushima S. Clinical marginal and internal gaps of Procera AllCeram crowns. J Oral Rehabil 32 (2005) 526-530
24. Quintas A.F., Oliveira F., and Bottino M.A. Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines, and luting agents: an in vitro evaluation. J Prosthet Dent 92 (2004) 250-257
25. Andersson M., Carlsson L., Persson M., and Bergman B. Accuracy of machine milling and spark erosion with a CAD/CAM system. J Prosthet Dent 76 (1996) 187-193
26. Persson M., Andersson M., and Bergman B. The accuracy of a high-precision digitizer for CAD/CAM of crowns. J Prosthet Dent 74 (1995) 223-229
27. Bindl A., and Mörmann W.H. Fit of all-ceramic posterior fixed partial denture frameworks in vitro. Int J Periodontics Restorative Dent 27 (2007) 567-575
28. Witkowski S., Komine F., and Gerds T. Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques. J Prosthet Dent 96 (2006) 47-52
29. Molin M.K., Karlsson S.L., and Kristiansen M.S. Influence of film thickness on joint bend strength of a ceramic/resin composite joint. Dent Mater 12 (1996) 245-249
30. Tsukada G., Tanaka T., Kajihara T., Torii M., and Inoue K. Film thickness and fluidity of various luting cements determined using a trial indentation meter. Dent Mater 22 (2006) 183-188
31. Holmes J.R., Bayne S.C., Holland G.A., and Sulik W.D. Considerations in measurement of marginal fit. J Prosthet Dent 62 (1989) 405-408
32. May K.B., Russell M.M., Razzoog M.E., and Lang B.R. Precision of fit: the Procera AllCeram crown. J Prosthet Dent 80 (1998) 394-404
33. Wolfart S., Wegner S.M., Al-Halabi A., and Kern M. Clinical evaluation of marginal fit of a new experimental all-ceramic system before and after cementation. Int J Prosthodont 16 (2003) 587-592
34. Stappert C.F., Dai M., Chitmongkolsuk S., Gerds T., and Strub J.R. Marginal adaptation of three-unit fixed partial dentures constructed from pressed ceramic systems. Br Dent J 196 (2004) 766-770
35. Reich S., Wichmann M., Nkenke E., and Proeschel P. Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci 113 (2005) 174-179
36. Strub J.R., Rekow E.D., and Witkowski S. Computer-aided design and fabrication of dental restorations: current systems and future possibilities. J Am Dent Assoc 137 (2006) 1289-1296
37. Att W., Stamouli K., Gerds T., and Strub J.R. Fracture resistance of different zirconium dioxide three-unit all-ceramic fixed partial dentures. Acta Odontol Scand 65 (2007) 14-21
38. Att W., Grigoriadou M., and Strub J.R. ZrO2 three-unit fixed partial dentures: comparison of failure load before and after exposure to a mastication simulator. J Oral Rehabil 34 (2007) 282-290
39. Komine F., Gerds T., Witkowski S., and Strub J.R. Influence of framework configuration on the marginal adaptation of zirconium dioxide ceramic anterior four-unit frameworks. Acta Odontol Scand 63 (2005) 361-366
40. Kern M., Strub J.R., and Lü X.Y. Wear of composite resin veneering materials in a dual-axis chewing simulator. J Oral Rehabil 26 (1999) 372-378
41. Blatz M.B., Sadan A., and Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 89 (2003) 268-274
42. DeLong R., and Douglas W.H. Development of an artificial oral environment for the testing of dental restoratives: bi-axial force and movement control. J Dent Res 62 (1983) 32-36
43. Wassell R.W., McCabe J.F., and Walls A.W. A two-body frictional wear test. J Dent Res 73 (1994) 1546-1553
44. De Boever J.A., McCall Jr. W.D., Holden S., and Ash Jr. M.M. Functional occlusal forces: an investigation by telemetry. J Prosthet Dent 40 (1978) 326-333
45. Groten M., Axmann D., Pröbster L., and Weber H. Determination of the minimum number of marginal gap measurements required for practical in-vitro testing. J Prosthet Dent 83 (2000) 40-49