A review of dental CAD/CAM: Current status and future perspectives from 20 years of experience

Dental Materials Journal

Volumn 28, Issue 1, 2009, Pages 44-56

  Miyazaki, Takashi ^a   Hotta, Yasuhiro ^a   Kunii, Jun ^a   Kuriyama, Soichi ^a   Tamaki, Yukimichi ^a  

^a SHOWA UNIVERSITY SCHOOL OF DENTISTRY   (Japan)

Author keywords

CAD CAM; Crowns and fixed partial dentures; Digitizing; Network; Zirconia

Indexed keywords

COMPUTER AIDED DESIGN; DENTAL SURGERY; DENTAL TECHNOLOGY; DENTURE; EQUIPMENT DESIGN; FORECASTING; HUMAN; LABORATORY; REVIEW; TOOTH CROWN; TOOTH PROSTHESIS;

COMPUTER-AIDED DESIGN; CROWNS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION, PERMANENT; DENTURE DESIGN; DENTURE, PARTIAL, FIXED; EQUIPMENT DESIGN; FORECASTING; HUMANS; LABORATORIES, DENTAL; TECHNOLOGY, DENTAL;

EID: 63449088303     PISSN: 02874547     EISSN: None     Source Type: Journal    
DOI: 10.4012/dmj.28.44     Document Type: Review

References (65)

1. Raigrodski AJ, Chiche GL. The safety and efficiency of anterior ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2001; 86: 520-525
2. Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: A review of the literature. J Prosthet Den 2004; 92: 557-562
3. Mormann WH, Brandestini M, Lutz F, Barbakow F. Chair side computer-aided direct ceramic inlays. Quintessence Int 1989; 20: 329-339
4. Duret F, Preston JD. CAD/CAM imaging in dentistry. Curr Opin Dent 1991; 1: 150-154
5. Rekow ED. Dental CAD/CAM systems: what is the state of the art? J Am Dent Assoc 1991; 122: 43-48
6. Van der Zel JM. Ceramic-fused-to-metal restorations with a new CAD/CAM system. Quintessence Int 1993; 24: 769-778
7. Andersson M, Oden A. A new all-ceramic crown: a dense-sintered, high purity alumina coping with porcelain. Acta Odontol Scand 1993; 51: 59-64
8. Andersson M, Carlsson L, Persson M, Bergmann B. Accuracy of machine milling and spark erosion with a CAD/CAM system. J Prosthet Dent 1996; 76: 187-193
9. Aoki H, Fujita T, Nishina T. CAD system and NC construction for the automation of dental laboratory. The Jounal of Dental Technology 1986; 14: 1495-1526
10. Tsutsumi S, Fukuda S, Tani Y. 3-D image measurements of teeth and alveolar ridge. JDR 1989; 68(Sp.): 924
11. Kimura H, Sohmura T, Watanabe T. Threedimensional shape measurement of teeth (part 1) Measurement by meanns of high precision laser displacement meter. J J Dent Mater 1988; 7: 552-557
12. Kimura H, Kawanaka M, Watanbe T, Takahashi J, An H, Omura K. An approach to dental CAD/CAM (part 1) Measurement of coronal figure. J J Dent Mater 1988; 7: 413-418
13. Hikita K, Uchiyama Y. Studies on three dimensional measurement and restoration of tooth crown form by CAD/CAM. J Jpn Prosthondont Soc 1989; 33(S82): 142
14. Persson M, Andersson M, Bergman B. The accuracy of a high-precision digitizer for CAD/CAM crowns. J Prosthet Dent 1995; 74: 223-229
15. Kobayashi Y, Lee G, Hotta Y, Fujiwara N, Miyazaki T. Measuring accuracy of the shoulder of the crown abutment by using the experimentally developed laser digitizer, J Showa Univ Dent Soc 1999; 19: 158-162
16. Kobayashi Y, Lee G, Hotta Y, Fujiwara N, Miyazaki T. The effect of proximal teeth on the digitizing accuracy of the shoulder margin of the crown abutment by a laser digitizer equipped in an experimentally developed CAD/CAM device. J Showa Univ Dent Soc 2000; 20: 158-164
17. Reiss B, Walther W. Clinical long-term results and 10-year Kaplan-Meier analysis of Cerec restorations. Int J Comput Dent 2000; 3: 9-23
18. Nakamura T, Dei N, Kojima T, Wakabayashi K. Marginal and internal fit of Cerec 3 CAD/CAM allceramic crowns. Inter J Prosthodontics 2003; 16: 244-248
19. Effrosyni A, Tsitrou E, Northeast S, van Noort R. Evaluation of the marginal fit of three margin designs of resin composite crowns using CAD/CAM. J Dent 2007; 35: 68-73
20. Miyazaki T, Hotta Y, Suzuki E, Miyaji T, Takahashi H, Furuya R, Kawawa T. An Approach to the dental CAD/CAM using the electric discharge machining (Part 1) Measurement of coronal figure, computer graphics, and CAD procedure. J Showa Univ Dent Soc 1991; 11: 65-69
21. Miyazaki T, Kitamura M, Inamoti T, Suzuki E, Miyaji T, Takahashi H, Furuya R, Kawawa T. An approach to the dental CAD/CAM using the electric discharge machining (Part2) development of the three dimensional multi functional NC machine and the machining properties by the ram type EDM in diionized water. J Showa Univ Dent Soc 1991; 11: 70-77
22. Miyazaki T, Hotta Y, Kitamura M, Suzuki E, Miyaji T, Takahashi H, Furuya R, Kawawa T. An approach to the dental CAD/CAM using the electric discharge machining (Part 3) An approach to the fabrication of electrode for the ram type electric discharge machining using the NC milling technique. J Showa Univ Dent Soc 1991; 11: 78-83
23. Miyazaki T, Kitamura M, Inamoti T, Suzuki E, Miyaji T, Takahashi H, Furuya R, Kawawa T. An approach to the dental CAD/CAM using the Electric discharge machining (Part 4) Fabrication of male and female of the telescope denture by the NC wire type electric discharge machining. J Showa Univ Dent Soc 1991; 11: 84-88
24. Hotta Y. Fabrication of titanium copings using the CAD/CAM process. J J Dent Mat Dev 1992; 11: 169-178
25. Hotta Y, Miyazaki T, Lee G, Kobayashi Y. Accuracy of the ceramic crown fabricated by the newly developed CAD/CAM system,. J Showa Univ Dent Soc 1996; 16: 230-234
26. Kobayashi Y, Miyazaki T, Hotta Y, Lee G. Development of New Fabrication system of inlays by laser digitized copy milling techniques. J Showa Univ Dent Soc 1996; 16: 235-239
27. Hotta Y, Miyazaki T, Warita K, Kawawa T. Automatic fabrication of ceramic crowns using a newly developed dental CAD/CAM system. J J Esthe Dent 1998: 10: 69-75
28. Kobayashi Y. The effect of digitizing conditions on the accuracy of ceramic crowns fabricated by using the second version of the experimentally developed dental CAD/CAM machine. J Showa Univ Dent Soc 2000; 20: 165-172
29. Miyazaki T, Hotta Y, Kobayashi Y, Lee G, Furuya A, Kawawa T. Characteristics of dental CAD/CAM system "Decsy" and clinical application. QDT 2000; 25: 34-41
30. Hotta Y, Ozawa A, Kobayashi Y, Miyazaki T. Development of a dental CAD/CAM system fabricating dental prostheses. J Showa Univ Dent Soc 2001; 21: 86-91
31. Hotta Y, Miyazaki T, Fujiwara T, Tomita S, Shinya A, Sugai Y, Ogura H. Durability of tungsten carbide burs for the fabrication of titanium crowns using dental CAD/CAM. DMJ 2004; 23: 190-196
32. Tomita S, Shinya A, Gomi H, Matsuda T, Katagiri S, Shinya A, SuzukiI H, Yara A, Ogura H, Hotta Y, Miyazaki T, Sakamoto Y. Machining accuracy of CAD/CAM ceramic crowns fabricated with Repeated machining using the same diamond bur. DMJ 2005; 24: 123-133
33. Lucas LC, Lemons JE. Biodegradation of restorative metallic systems. Adv Dent Res 1992; 6: 32-37
34. Sorensen LA, Knode H, Torres TJ. In-ceram allceramic bridge technology. Quintessence Dent Technol 1992; 15: 41-46
35. Sorensen JA, Kang SK, Torren TJ, Knode H. In-Ceram fixed partial dentures:three-year clinical trial results. J Calif Dent Assoc 1998; 26: 207-214
36. Sorensen JA, Cruz M, Mito WT, Raffeiner O, Meredith HR, Foser HP. A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic. Pract Periodontics Aethet Dent 1999; 11: 95-106
37. Tinschert J, Zwez D, Marx R, Anusavice KJ. Structual reliability of alumina-, feldspar-, leucite, mica-and zirconia-based ceramics. J Dent 2000; 28: 529-535
38. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 2001; 14: 231-238
39. Vult von Steyern P, Jonsson O, Nilner K. Five year evaluation of posterior all-ceramic three-unit (In-Ceram) FPDs. Int J Prosthodont 2001; 14: 379-384
40. Olsson KG, Furst B, Andersson B, Carlsson GE. A long-term retrospective and clinical follow-up study of In-Ceram Alumina FPDs. Int I Prosthodont 2003; 16: 150-156
41. Suarez MJ, Lozano JF, Paz Salido M, Martinez F. Three-year clinical evaluation of In-Ceram Zirconia posterior FPDs. Int J Prosthodont 2004; 17: 35-38
42. Esquivel-Upshaw JF, Anusavice KJ, Young H, Jones J, Gibbs C. Clinical performance of Lithia disilicatebased core ceramic for three-unit posterior FPDs. Int J Prosthodont 2004; 17: 469-475
43. Oden A, Andersson M, Krystek-Ondracek I, Magnusson D. Five-year clinical evaluation of Procera AllCeram crowns. J Prosthet Dent 1998; 80: 450-456
44. Christel P, Meunier A, Heller M, Torre JP, Peille CN. Mechanical properties and short-term in -vitvo evaluation of yttrium-oxide-partially-stabilized zirconia. J Biomed Mater Res 1989; 23: 45-61
45. Filser F, Kocher P, Weibe F, Luthy H, ScharerP, Gauckler LJ. Reliability and strength of all-ceramic dental restorations fabricated by direct ceramic machining (DCM). Int J Comput Dent 2001; 4: 89-106
46. Besimo CE, Spielmann HP, Rohner HP. Computerassisted generation of all-ceramic crowns and fixed partial dentures. Int J Comput Dent 2001; 4: 43-62
47. Suttor D, Bunke K, Hoescheler S, Hauptmann H, Hertlein G. LAVA-the system for all-ceramic ZrO2 crowns and bridge frameworks. Int J Comput Dent 2001; 4: 195-206
48. Sorensen JA. The Lava system for CAD/CAM production of high-strength precision fixed prosthodontics. QDT 2003; 26: 57-67
49. Piwowarczyk A, Ottl P, Lauer H-C. Kuretzky T. A clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava TM. J Prosthodont 2005; 14: 39-45
50. th International Symposium on Ceramics in Medicine Bioceramics 10, Paris, France. Amsterdam: Elsevier; 1997. p.437-440
51. Luthardt RG, Holzhuter MS, Rudolph H, Herold V, Walter MH. CAD/CAM-machining effects on Y-TZP zirconia. Dental Materials 2004; 20: 655-662
52. Pittayachawan P, McDonald A, Petrie A, Knowles J. The biaxial flexural strength and fatigue property of Lava Y-TZP dental ceramic. Dental Materials 2007; 23: 1018-1029
53. Kunii J, Hotta Y, Miyazaki T. Effect of sintering on the marginal and internal fits of CAD/CAM fabricated zirconia frameworks. DMJ 2007 accepted.
54. Tinschert J, Natt G, Mautsch W, Spiekermann H, Anusavice KJ. Marginal fit of Alumina and Zirconia-Based Produced by a CAD/CAM System. Oper Dent 2001; 26: 367-374.
55. Coli P, Karlsson S. Fit of a New Pressure-Sintered Zirconium Dioxide Coping. Int J Prosthodont 2004; 17: 59-64.
56. Reich S, Wichmann M, Nkenke E, Proeschel P. Clinical fit of all-ceramic three-unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci 2005; 113: 174-179.
57. Kelly JR, Tesk JK, Sorensen JA. Failure of allceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res 1995; 74: 1253-1258
58. Oh W, Gotzen N, Anusavice KJ. Influence of connector design on fracture probability of ceramic fixed-partial dentures. J Dent Res 2002; 81: 623-627
59. Oh WS, Anusavice KJ. Effect of connector design on fracture resistance of all-ceramic fixed partial dentures. J Prosthet Dent 2002; 87: 536-542
60. Guazzato M, Proos K, Quach L, Swain MV. Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials 2004; 25: 5045-52
61. Luthy H, Filser F, Loeffel O, Schumacher M, Gauckler LJ, Hammerle CHF. Strength and reliability of four-unit all-ceramic posterior bridges. Dental Materials 2005; 21: 930-937
62. Williams RJ, Bibb R, Eggber D, Collis J. Use od CAD/CAM technology to fabricate a removable partial denture framework. J Prosthet Dent 2006; 96: 96-99
63. Shimakura M, Nagata T, Takeuchi M, Nemoto T. Retentive force of pure titanium konus telescope crowns fabricated using CAD/CAM system. DMJ 2008; 27: 211-215
64. Nikzad S, Azari A. A novel stereolithographic surgical guide template for planning treatment involving a mandibular dental implant. J Oral Maxillofac Surg 2008; 66: 1446-1454
65. Tee-Khib N, Cheng AC, Lee H, Wee AG, Leong EW. The management of a completely edentulous patient using simultaneous maxillary and mandibular CAD/CAM-guided immediately loaded definitive implantsupported prostheses: a clinical report. J Prosthet Dent 2008; 99: 416-420