Investigation of thermal and viscoelastic properties of polymers relevant to hot melt extrusion - II: Cellulosic polymers

Journal of Excipients and Food Chemicals

Volumn 5, Issue 1, 2014, Pages 46-55

  Meena, Anuprabha ^a   Parikh, Tapan ^a   Gupta, Simerdeep Singh ^a   Serajuddin, Abu T M ^a  

^a ST JOHN'S UNIVERSITY   (United States)

Author keywords

Cellulose; Hot melt extrusion; HPMC; HPMC AS; HPMCP; Polymers; Rheology; Thermal properties; Viscosity

Indexed keywords

CELLULOSE; ETHYL CELLULOSE; HYDROXYPROPYLMETHYLCELLULOSE; METHYLCELLULOSE; POLYMER;

ARTICLE; CHEMICAL STRUCTURE; DEGRADATION; DIFFERENTIAL SCANNING CALORIMETRY; DRUG MANUFACTURE; FLOW KINETICS; FLOW MEASUREMENT; GLASS TRANSITION TEMPERATURE; HOT MELT EXTRUSION; HYDROGEN BOND; MOLECULAR WEIGHT; THERMOGRAVIMETRY; VISCOELASTICITY; X RAY POWDER DIFFRACTION;

EID: 84897947924     PISSN: None     EISSN: 21502668     Source Type: Journal    
DOI: None     Document Type: Article

References (37)

1. Serajuddin ATM. Solid dispersion of poorly watersoluble drugs: Early promises, subsequent problems, and recent breakthroughs. J Pharm Sci, 88(10): 1058-66, 1999.
2. Crowley MM, Zhang F, Repka MA, Thumma S, Upadhye SB, Kumar Battu S, McGinity JW, Martin C. Pharmaceutical applications of hot-melt extrusion: Part I. Drug Dev Ind Pharm, 33(9): 909-926, 2007.
3. Hülsmann S, Backensfeld T, Keitel S, Bodmeier R. Melt extrusion - an alternative method for enhancing the dissolution rate of 17β-estradiol hemihydrate. Eur J Pharm Biopharm, 49(3): 237-242, 2000.
4. Madan S, Madan S. Hot melt extrusion and its pharmaceutical applications. Asian J Pharm Sci, 7(2): 123-33, 2012.
5. Repka MA, Kumar Battu S, Upadhye SB, Thumma S, Crowley MM, Zhang F, Martin C, McGinity JW. Pharmaceutical Applications of Hot-Melt Extrusion: Part II. Drug Dev Ind Pharm, 33(10): 1043-1057, 2007.
6. Kowalski J, Kalb O, Joshi YM, Serajuddin ATM. Application of melt granulation technology to enhance stability of a moisture sensitive immediate-release drug product. Int J Pharm, 381(1): 56-61, 2009.
7. Lakshman JP, Kowalski J, Vasanthavada M, Tong WQ, Joshi YM, Serajuddin ATM. Application of melt granulation technology to enhance tabletting properties of poorly compactible high-dose drugs. J Pharm Sci, 100(4): 1553-65, 2011.
8. Vasanthavada M, Wang Y, Haefele T, Lakshman JP, Mone M, Tong WQ, Joshi YM, Serajuddin ATM. Application of melt granulation technology using twinscrew extruder in development of high-dose modifiedrelease tablet formulation. J Pharm Sci, 100(5): 1923-34
9. Hancock BC, Zografi G. Characteristics and significance of the amorphous state in pharmaceutical systems. J Pharm Sci, 86(1): 1-12, 1997.
10. Alonzo DE, Gao Y, Zhou D, Mo H, Zhang GGZ, Taylor LS. Dissolution and precipitation behavior of amorphous solid dispersions. J Pharm Sci, 100(8): 3316-31, 2011.
11. Terinte N, Ibbett R, Schuster KC. Overview on native cellulose and microcrystalline cellulose I structure studied by X-ray diffraction (WAXD): Comparison between measurement techniques. Lenzinger Berichte, 89: 118-31, 2011.
12. α from synchrotron x-ray and neutron fiber diffraction. J Am Chem Soc, 125(47):14300-14306, 2003.
13. Liu H, Zhang L, Takaragi A, Miyamoto T. Effect of substituent distribution on water solubility of Omethylcellulose. Cellulose, 4(4): 321-7, 1997.
14. Konno H, Taylor LS. Influence of different polymers on the crystallization tendency of molecularly dispersed amorphous felodipine. J Pharm Sci, 95(12): 2692-2705, 2006.
15. Teja SB, Patil SP, Shete G, Patel S, Bansal AK. Drugexcipient behavior in polymer amorphous solid dispersions. J Excip Food Chem, 4(3):70-94, 2014.
16. Marques-Marinho FD, Vianna-Soares CD. Cellulose and its derivatives use in the pharmaceutical compounding practice. Cellulose - Medical, pharmaceutical and electronic applications. InTech, 2013.
17. Coppens KA, Hall MJ, Koblinski, BD, Larsen PS, Read MD, Shrestha, U. Controlled release of amorphous solid dispersion utilizing hot melt extrusion. The Dow Chemicals Co., Form No. 198-02206, 2009.
18. Rambali B, Verreck G, Baert L, Massart DL. Itraconazole formulation studies of the melt-extrusion process with mixture design. Drug Dev Ind Pharm, 29(6): 641-52, 2003.
19. Coppens K, Hall MJ, Larsen P, Mitchell S, Read MD, Shrestha U. Hot melt extrusion: Effect of polymer selection and processing on drug dissolution. The Dow Chemicals Co. Form No. 198-02136-0805AB, 2005.
20. Prodduturi S, Urman KL, Otaigbe JU, Repka MA. Stabilization of hot-melt extrusion formulations containing solid solutions using polymer blends. AAPS PharmSciTech, 8(2): E152-E161, 2007.
21. Verreck G, Six K, Mooter GV den, Baert L, Peeters J, Brewster ME. Characterization of solid dispersions of itraconazole and hydroxypropylmethylcellulose prepared by melt extrusion-part I. Int J Pharm, 251(1-2): 165-174, 2003.
22. Suzuki H, Sunada H. Influence of water-soluble polymers on the dissolution of nifedipine solid dispersions with combined carriers. Chem Pharm Bull (Tokyo), 46(3): 482-7, 1998.
23. Tanno F, Nishiyama Y, Kokubo H, Obara S. Evaluation of Hypromellose acetate succinate (HPMCAS) as a carrier in solid dispersions. Drug Dev Ind Pharm, 30(1): 9-17, 2004.
24. Dong Z, Chatterji A, Sandhu H, Choi DS, Chokshi H, Shah N. Evaluation of solid state properties of solid dispersions prepared by hot-melt extrusion and solvent co-precipitation. Int J Pharm, 355(1-2): 141-9, 2008.
25. Dong Z, Choi D. Hydroxypropyl Methylcellulose acetate succinate: Potential drug-excipient incompatibility. AAPS PharmSciTech, 9(3): 991-7, 2008.
26. Li L, Lowringer M, Marota M, Mao Y, Mowery M. Hot melt extrusion using cellulosic polymers: Thermal degradation chemistry of polymers and potential implications to formulation development. NJ, USA, 2010.
27. Sarode AL, Obara S, Tanno FK, Sandhu H, Iyer R, Shah N. Stability assessment of hypromellose acetate succinate (HPMCAS) for application in hot melt extrusion (HME). Carbohyd Polym, 101(0): 146-153, 2014.
28. Crowley MM, Schroeder B, Fredersdorf A, Obara S, Talarico M, Kucera S. Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion. Int J Pharm, 269(2): 509-22, 2004.
29. Gupta SS, Meena A, Parikh T, Serajuddin ATM. Investigation of thermal and viscoelastic properties of polymers relevant to hot melt extrusion, I. Polyvinyl based polymers. J Excip Food Chem, 5(1):32-45, 2014.
30. Filho GR, de Assunção RMN, Vieira JG, Meireles C da S, Cerqueira DA, Barud H da S. Characterization of methylcellulose produced from sugar cane bagasse cellulose: Crystallinity and thermal properties. Polym Degrad Stabil, 92(2): 205-210, 2007.
31. Espinoza-Herrera N, Pedroza-Islas R, San Martín- Martinez E, Cruz-Orea A, Tomás S. Thermal, mechanical and microstructures properties of cellulose derivatives films: A comparative study. Food Biophys, 6(1): 106-14, 2011.
32. Simon GP, Safari Ardi M, Goodwin AA, Zipper MD, Andrews SR, Shinton S, Williams G, Galop M, Trimmer M. Molecular mobility of substituted poly(p-phenylenes) characterized by a range of polymer relaxation techniques. J Polym Sci Part B Polym Phys, 36(9):1465-1481, 1998.
33. Kararli TT, Hurlbut JB, Needham TE. Glass-rubber transitions of cellulosic polymers by dynamic mechanical analysis. J Pharm Sci, 79(9): 845-8, 1990.
34. Coppens KA, Hall MJ, Mitchell SA, Read MD. Hypromellose, ethylcellulose, and polyethylene oxide use in hot melt extrusion. The Dow Chemicals Co., Form No. 198-02150, 2006.
35. Gómez-Carracedo A, Alvarez-Lorenzo C, Gómez- Amoza JL, Concheiro A. Chemical structure and glass transition temperature of non-ionic cellulose ethers. J Therm Anal Calorim, 73(2): 587-96, 2003.
36. Perfetti G, Alphazan T, Wildeboer WJ, Meesters GMH. Thermo-physical characterization of Pharmacoat® 603, Pharmacoat® 615 and Mowiol® 4-98. J Therm Anal Calorim, 109(1): 203-15, 2011.
37. Ghosh I, Snyder J, Vippagunta R, Alvine M, Vakil R, Tong WQ, Vippagunta S. Comparison of HPMC based polymers performance as carriers for manufacture of solid dispersions using the melt extruder. Int J Pharm, 419(1-2): 12-9, 2011.