Surgical engineering in cranio-maxillofacial surgery: A literature review

Journal of Healthcare Engineering

Volumn 3, Issue 1, 2012, Pages 53-86

  Olszewski, Raphael ^a  

^a CLINIQUES UNIVERSITAIRES SAINT LUC   (Belgium)

Author keywords

Craniofacial; Engineering; Maxillofacial; Review; Surgery

Indexed keywords

EID: 84864074467     PISSN: 20402295     EISSN: 20402309     Source Type: Journal    
DOI: 10.1260/2040-2295.3.1.53     Document Type: Review

References (294)

1. Kim H, Jürgens P, Weber S, Nolte LP, Reyes M. A new soft-tissue simulation strategy for craniomaxillofacial surgery using facial muscle template model. Prog Biophys Mol Biol. 2010; 103(2-3):284-291.
2. Barbarino GG, Jabareen M, Trzewik J, Nkengne A, Stamatas G, Mazza E. Development and validation of a three-dimensional finite element model of the face. J Biomech Eng. 2009; 131(4):041006.
3. Beldie L, Walker B, Lu Y, Richmond S, Middleton J. Finite element modelling of maxillofacial surgery and facial expressions-a preliminary study. Int J Med Robot. 2010; 6(4):422-430.
4. Wang D, Cheng L, Wang C, Qian Y, Pan X. Biomechanical analysis of rapid maxillary expansion in the UCLP patient. Med Eng Phys. 2009; 31(3):409-417.
5. Kober C, Stübinger S, Hellmich C, Sader R, Zeilhofer HF. Mandibular finite element simulation as a tool for trauma surgery. Int J Comput Dent. 2008; 11(3-4):175-181.
6. Korkmaz HH. Evaluation of different miniplates in fixation of fractured human mandible with the finite element method. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2007; 103(6):e1-13.
7. Lovald S, Baack B, Gaball C, Olson G, Hoard A. Biomechanical optimization of bone plates used in rigid fixation of mandibular symphysis fractures. J Oral Maxillofac Surg. 2010; 68(8):1833-1841.
8. Ji B, Wang C, Liu L, Long J, Tian W, Wang H. A biomechanical analysis of titanium miniplates used for treatment of mandibular symphyseal fractures with the finite element method. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2010; 109(3):e21-27.
9. Cox T, Kohn MW, Impelluso T. Computerized analysis of resorbable polymer plates and screws for the rigid fixation of mandibular angle fractures. J Oral Maxillofac Surg. 2003; 61(4):481-487, discussion 487-488.
10. Al-Sukhun J, Lindqvist C, Kontio R. Modelling of orbital deformation using finite-element analysis. J R Soc Interface. 2006; 3(7):255-262.
11. Luboz V, Chabanas M, Swider P, Payan Y. Orbital and maxillofacial computer aided surgery: patientspecific finite element models to predict surgical outcomes. Comput Methods Biomech Biomed Engin. 2005; 8(4):259-265.
12. Sutradhar A, Paulino GH, Miller MJ, Nguyen TH. Topological optimization for designing patientspecific large craniofacial segmental bone replacements. Proc Natl Acad Sci USA. 2010; 107(30):13222-13227.
13. Szucs A, Bujtár P, Sándor GK, Barabás J. Finite element analysis of the human mandible to assess the effect of removing an impacted third molar. J Can Dent Assoc. 2010; 76:a72.
14. van Staden RC, Guan H, Johnson NW, Loo YC, Meredith N. Step-wise analysis of the dental implant insertion process using the finite element technique. Clin Oral Implants Res. 2008; 19(3):303-313.
15. Huang HL, Fuh LJ, Ko CC, Hsu JT, Chen CC. Biomechanical effects of a maxillary implant in the augmented sinus: a three-dimensional finite element analysis. Int J Oral Maxillofac Implants. 2009; 24(3):455-462.
16. Remmler D, Olson L, Duke D, Ekstrom R, Matthews D, Ullrich CG. Presurgical finite element analysis from routine computed tomography studies for craniofacial distraction: II. An engineering prediction model for gradual correction of asymmetric skull deformities. Plast Reconstr Surg. 1998; 102(5):1395-1404.
17. Remmler D, Olson L, Ekstrom R, Duke D, Matamoros A, Matthews D, Ullrich CG. Pre-surgical CT/FEA for craniofacial distraction: I. Methodology, development, and validation of the cranial finite element model. Med Eng Phys. 1998; 20(8):607-619.
18. Veziroglu F, Yilmaz D. Biomechanical evaluation of the consolidation period of alveolar distraction osteogenesis with three-dimensional finite element analysis. Int J Oral Maxillofac Surg. 2008; 37(5):448-452.
19. Edwards SP. Computer-assisted craniomaxillofacial surgery. Oral Maxillofac Surg Clin North Am. 2010; 22(1):117-134. Review.
20. Meyer U, Stamm T, Meier N, Joos U. First experience with a public domain computer-aided surgical system. Br J Oral Maxillofac Surg. 2002; 40(2):96-104.
21. Altobelli DE, Kikinis R, Mulliken JB, Cline H, Lorensen W, Jolesz F. Computer-assisted threedimensional planning in craniofacial surgery. Plast Reconstr Surg. 1993; 92(4):576-585, discussion 586-587.
22. Vander Sloten J, Degryse K, Gobin R, Van der Perre G, Mommaerts MY. Interactive simulation of cranial surgery in a computer aided design environment. J Craniomaxillofac Surg. 1996; 24(2):122-129.
23. Jans G, Vander Sloten J, Gobin R, Van der Perre G, Van Audekercke R, Mommaerts M. Computeraided craniofacial surgical planning implemented in CAD software. Comput Aided Surg. 1999; 4(3):117-128.
24. Gladilin E, Ivanov A. Computational modelling and optimisation of soft tissue outcome in craniomaxillofacial surgery planning. Comput Methods Biomech Biomed Engin. 2009; 12(3):305-318.
25. Jayaratne YS, Zwahlen RA, Lo J, Tam SC, Cheung LK. Computer-aided maxillofacial surgery: an update. Surg Innov. 2010; 17(3):217-225. Review.
26. Erickson KL, Bell WH, Goldsmith DH. Analytical model surgery, in: Bell WH (ed). Modern practice in orthognathic and reconstructive surgery. Saunders, USA, 1992:154-216.
27. Boutault H, Cadenat H. Stratégie de la décision en chirurgie orthognathique. Rev Stomatol Chir Maxillofac. 1992; 93(1):287-297.
28. Vesse M. Que reste-t-il de l'examen clinique en chirurgie orthopédique des maxillaires en 1991? Rev Stomatol Chir Maxillofac. 1992; 93(1):13-19.
29. Rustemeyer J, Groddeck A, Zwerger S, Bremerich A. The accuracy of two-dimensional planning for routine orthognathic surgery. Br J Oral Maxillofac Surg. 2010; 48(4):271-275.
30. Gateno J, Forrest KK, Camp B. A comparison of three methods of face bow transfer recording: Implications for orthognathic surgery. J Oral Maxillofac Surg. 2001; 59(6):635-640.
31. Hohl TH. The use of an anatomic articulator in segmental orthognathic surgery. Am J Orthod. 1978; 73(4):428-442.
32. Ellis E III. Accuracy of model surgery: Evaluation of an old technique and introduction of a new one. J Oral Maxillofac Surg. 1990; 48(11):1161-1167.
33. Ellis E III. Bimaxillary surgery using an intermediate splint to position the maxilla. J Oral Maxillofac Surg. 1999; 57(1):53-56.
34. Lapp TH. Bimaxillary surgery without the use of an intermediate splint to position the maxilla. J Oral Maxillofac Surg. 1999; 57(1):57-60.
35. Bamber MA, Harris M. The role of the occlusal wafer in orthognathic surgery: a comparison of thick and thin intermediate osteotomy wafers. J Craniomaxillofac Surg. 1995; 23(6):396-400.
36. Delaire J. Pitfalls in the interpretation of cephalometric teleradiography. Rev Stomatol Chir Maxillofac. 1984; 85(3):176-185.
37. Da Silveira HL, Silveira HE. Reproducibility of cephalometric measurements made by three radiology clinics. Angle Orthod. 2006; 76(3):394-399.
38. Houston WJB, Maher RE, McElroy D, Sherriff M. Sources of error in measurements from cephalometric radiographs. Eur J Orthod. 1986; 8(3):149-151.
39. Ongkosuwito EM, Katsaros C, van 't Hof MA, Bodegom JC, Kuijpers-Jagtman AM. The reproducibility of cephalometric measurements: a comparison of analogue and digital methods. Eur J Orthod. 2002; 24(6):655-665.
40. Olszewski R, Reychler H. Limitations of orthognathic model surgery: theoretical and practical implications. Rev Stomatol Chir Maxillofac. 2004; 105(3):165-169.
41. Marko JV. Simple hinge and semiadjustable articulators in orthognathic surgery. Am J Orthod Dentofac Orthop. 1986; 90:37-44.
42. Nattestad A, Vedtofte P. Pitfalls in orthognathic model surgery. The significance of using different reference lines and points during model surgery and operation. Int J Oral Maxillofac Surg. 1994; 23(1):11-15.
43. Gil JN, Claus JPD, Manfro R, Lima SM Jr. Predictability of maxillary repositioning during bimaxillary surgery: accuracy of a new technique. Int J Oral Maxillofac Surg. 2007; 36(4):296-300.
44. Barbenel JC, Paul PE, Khambay BS, Walker FS, Moos KF, Ayoub AF. Errors in orthognathic surgery planning: the effect of inaccurate study model orientation. Int J Oral Maxillofac Surg. 2010; 39(11):1103-1108.
45. Popat H, Richmond S, Drage NA. New developments in: three-dimensional planning for orthognathic surgery. J Orthod. 2010; 37(2):62-71.
46. Xia JJ, Gateno J, Teichgraeber JF, Christensen AM, Lasky RE, Lemoine JJ, Liebschner MA. Accuracy of the computer-aided surgical simulation (CASS) system in the treatment of patients with complex craniomaxillofacial deformity: A pilot study. J Oral Maxillofac Surg. 2007; 65(2):248-254.
47. Gateno J, Xia J, Teichgraeber JF, Rosen A. A new technique for the creation of a computerized composite skull model. J Oral Maxillofac Surg. 2003; 61(2):222-227.
48. Z'Graggen M, Schiel HJ, Kunz C, Lambrecht JT. Three-dimensional cephalometry using individual skeletal laser technology models. Clin Anat. 2001; 14(4):258-268.
49. Swennen GR, Mollemans W, Schutyser F. Three-dimensional treatment planning of orthognathic surgery in the era of virtual imaging. J Oral Maxillofac Surg. 2009; 67(10):2080-2092.
50. Loh S, Yow M. Computer prediction of hard tissue profiles in orthognathic surgery. Int J Adult Orthodon Orthognath Surg. 2002; 17(4):342-347.
51. Tucker S, Cevidanes LH, Styner M, Kim H, Reyes M, Proffit W, Turvey T. Comparison of actual surgical outcomes and 3-dimensional surgical simulations. J Oral Maxillofac Surg. 2010; 68(10):2412-2421.
52. Calignano F, Vezzetti E. Soft tissue diagnosis in maxillofacial surgery: a preliminary study on threedimensional face geometrical features-based analysis. Aesthetic Plast Surg. 2010; 34(2):200-211.
53. Hajeer MY, Ayoub AF, Millett DT, Bock M, Siebert JP. Three-dimensional imaging in orthognathic surgery: the clinical application of a new method. Int J Adult Orthodon Orthognath Surg. 2002; 17(4):318-330.
54. Naftel AJ, Trenouth MJ. Stereo-assisted landmark detection for the analysis of changes in 3-D facial shape. Med Inform Internet Med. 2004; 29(2):137-155.
55. Ramieri GA, Spada MC, Nasi A, Tavolaccini A, Vezzetti E, Tornincasa S, Bianchi SD, Verzé L. Reconstruction of facial morphology from laser scanned data. Part I: reliability of the technique. Dentomaxillofac Radiol. 2006; 35(3):158-164.
56. Ayoub A, Garrahy A, Hood C, White J, Bock M, Siebert JP, Spencer R, Ray A. Validation of a visionbased, three-dimensional facial imaging system. Cleft Palate Craniofac J. 2003; 40(5):523-529.
57. Lübbers HT, Medinger L, Kruse A, Grätz KW, Matthews F. Precision and accuracy of the 3dMD photogrammetric system in craniomaxillofacial application. J Craniofac Surg. 2010; 21(3):763-767.
58. Khambay B, Nebel JC, Bowman J, Walker F, Hadley DM, Ayoub A. 3D stereophotogrammetric image superimposition onto 3D CT scan images: the future of orthognathic surgery. A pilot study. Int J Adult Orthodon Orthognath Surg. 2002; 17(4):331-341.
59. Mischkowski RA, Bongartz J, Giel D, Frey S, Thelen A, Hering P. Holographic face models as planning tool in maxillofacial surgery. Int J Comput Dent. 2004; 7(4):339-345.
60. Noguchi N, Tsuji M, Shigematsu M, Goto M. An orthognathic simulation system integrating teeth, jaw and face data using 3D cephalometry. Int J Oral Maxillofac Surg. 2007; 36(7):640-645.
61. Uechi J, Okayama M, Shibata T, Muguruma T, Hayashi K, Endo K, Mizoguchi I. A novel method for the 3-dimensional simulation of orthognathic surgery by using a multimodal image-fusion technique. Am J Orthod Dentofacial Orthop. 2006; 130(6):786-798.
62. Swennen GR, Mommaerts MY, Abeloos J, De Clercq C, Lamoral P, Neyt N, Casselman J, Schutyser F. A cone-beam CT based technique to augment the 3D virtual skull model with a detailed dental surface. Int J Oral Maxillofac Surg. 2009; 38(1):48-57.
63. Nadjmi N, Mollemans W, Daelemans A, Van Hemelen G, Schutyser F, Bergé S. Virtual occlusion in planning orthognathic surgical procedures. Int J Oral Maxillofac Surg. 2010; 39(5):457-462.
64. Schendel SA, Jacobson R. Three-dimensional imaging and computer simulation for office-based surgery. J Oral Maxillofac Surg. 2009; 67(10):2107-2114.
65. Westermark A, Zachow S, Eppley BL. Three-dimensional osteotomy planning in maxillofacial surgery including soft tissue prediction. J Craniofac Surg. 2005; 16(1):100-104.
66. Xia J, Ip HH, Samman N, Wong HT, Gateno J, Wang D, Yeung RW, Kot CS, Tideman H. Threedimensional virtual-reality surgical planning and soft-tissue prediction for orthognathic surgery. IEEE Trans Inf Technol Biome. 2001; 5(2):97-107.
67. Marchetti C, Bianchi A, Bassi M, Gori R, Lamberti C, Sarti A. Mathematical modeling and numerical simulation in maxillo-facial virtual surgery (VISU). J Craniofac Surg. 2006; 17(4):661-667, discussion 668.
68. Chang YB, Xia JJ, Gateno J, Xiong Z, Zhou X, Wong ST. An automatic and robust algorithm of reestablishment of digital dental occlusion. IEEE Trans Med Imaging. 2010; 29(9):1652-1663.
69. Fang JJ, Kuo TH. Modelling of mandibular movement. Comput Biol Med. 2008; 38(11-12):1152-1162.
70. Olszewski R, Villamil MB, Trevisan DG, Nedel LP, Freitas CM, Reychler H, Macq B. Towards an integrated system for planning and assisting maxillofacial orthognathic surgery. Comput Methods Programs Biomed. 2008; 91(1):13-21.
71. De Momi E, Chapuis J, Pappas I, Ferrigno G, Hallermann W, Schramm A, Caversaccio M. Automatic extraction of the mid-facial plane for cranio-maxillofacial surgery planning. Int J Oral Maxillofac Surg. 2006; 35(7):636-642.
72. Danesh G, Lippold C, Joos U, Meyer U. Technical and clinical assessment of the use of a new material-based splint in orthognathic surgery. Int J Oral Maxillofac Surg. 2006; 35(9):796-799.
73. Santler G. 3-D COSMOS: a new 3-D model based computerised operation simulation and navigation system. J Craniomaxillofac Surg. 2000; 28(5):287-293.
74. Reychler A. Notions d'orthopédie dento-maxillo-faciale, in Piette E, Reychler H (eds). Traité de pathologies buccale et maxillo-faciale. De Boeck, Belgium, 1990:1639-1724.
75. Tweed CH. Clinical orthodontics, Mosby, Saint Louis, 1960.
76. Sassouni V, Forrest A. Orthodontics in dental practice, Mosby, Saint Louis, 1971.
77. Bimler HP. Bimler therapy. Part 1. Bimler cephalometric analysis. J Clin Orthod. 1985; 19(7):501-523.
78. Lippold C, Danesh G, Meyer U, Hohoff A, Kelker M, Kleinheinz J. Potential and limitations of cephalometric analysis of maxillofacial bone movement in the case of LeFort III-distraction. J Orofac Orthop. 2005; 66(5):388-396.
79. Burstone CJ, James RR, Legan H, Murphy GA, Norton LA. Cephalometrics for orthognathic surgery. J Oral Surg. 1978; 36(4):269-276.
80. Delaire J. L'analyse architecturale et structurale cranio-faciale (de profil). Principes théoriques. Quelques exemples d'emploi en chirurgie maxillo-faciale. Rev Stomatol. 1978; 79(1):1-33.
81. Enlow DH. Handbook of facial growth, Saunders, Philadelphia, 1975.
82. Tsuji M, Nogushi N, Shigematsu M, Yamashita Y, Ihara K, Shikimori M, Goto M. A new navigation system based on cephalograms and dental casts for oral and maxillofacial surgery. Int J Oral Maxillofac Surg. 2006; 35(9):828-836.
83. Olszewski R, Cosnard G, Macq B, Mahy P, Reychler H. CT based cephalometric analysis: 3D cephalometric theoretical concept and software. Neuroradiology. 2006; 48(11):853-862.
84. Bettega G, Payan Y, Mollard B, Boyer A, Raphael B, Lavallee S. Asimulator for maxillofacial surgery integrating 3D cephalometry and orthodontia. Comput Aided Surg. 2000; 5(3):156-165.
85. Olszewski R, Tran Duy K, Raucent B, Reychler H, Nicolas V. Method and equipment for the simulation of the operation of maxillofacial surgery and transfer of this planning to the operating room. EU Patent n°2705051.
86. Treil J, Casteigt J, Borianne P, Madrid C, Jaeger M., de Bonnecaze P. L'équilibre architectural de la face: un concept céphalométrique 3D. Rev Stomatol Chir Maxillofac. 1999; 100(3):111-122.
87. Gateno J, Teichgraeben JF, Xia J. Method and apparatus for fabricating orthognathic surgical splints. Patent application publication US 2003/0065259 A1.
88. Wong B. Adjustable occlusal plane table and method of use for orthognathic set-ups. US Patent n° 4624639.
89. Glatt M. Accessory device for a dental articulator and method for use in fabrication of dental prosthetics. US patent n° 5795152.
90. Staples RC. Orthognathic surgery simulation instrument. US patent n° 6102698.
91. Wiechmann D, Ehmer U, Joos U, Dorr-Neudeck K. Le procédé de double socle calibré préfabriqué-KDMMS pour simulation et planification tridimensionnelle dans l'articulateur en chirurgie orthognathique. Rev Stomatol Chir Maxillofac. 1997; 98(2):91-95.
92. Theodossy T, Bamber MA. Model surgery with passive robot arm for orthognathic surgery planning. J Oral Maxillofac Surg. 2003; 61(11):1310-1317.
93. Hibi H, Sawaki Y, Ueda M. Three-dimensional model simulation in orthognathic surgery. Int J Adult Orthodon Orthognath Surg. 1997; 12(3):226-232.
94. Hassfeld S, Mühling J. Computer assisted oral and maxillofacial surgery-a review and an assessment of technology. Int J Oral Maxillofac Surg. 2001; 30(1):2-13.
95. Troulis MJ, Everett P, Seldin EB, Kikinis R, Kaban LB. Development of a three-dimensional treatment planning system based on computed tomographic data. Int J Oral Maxillofac Surg. 2002; 31(4):349-357.
96. Neumann P, Siebert D, Faulkner G, Krauss M, Schulz A, Lwowsky C, Tolxdorff T. Virtual 3D cutting for bone segment extraction in maxillofacial surgery planning. Stud Health Technol Inform. 1999; 62:235-241.
97. Xia J, Wang D, Samman N, Yeung RWK, Tideman H. Computer-assisted three dimensional surgical planning and simulation: 3D colour facial model generation. Int J Oral Maxillofac Surg. 2000; 29(4):2-10.
98. Xia J, Ip HS, Samman N, Wang, Kot CSB, Yeung RWK, Tideman H. Computer-assisted threedimensional surgical planning and simulation: 3D virtual osteotomy. Int J Oral Maxillofac Surg. 2000; 29(4):11-17.
99. Kau CH, Cronin AJ, Richmond S. A three-dimensional evaluation of postoperative swelling following orthognathic surgery at 6 months. Plast Reconstr Surg. 2007; 119(7):2192-2199.
100. Soncul M, Bamber MA. Evaluation of facial soft tissue changes with optical surface scan after surgical correction of Class III deformities. J Oral Maxillofac Surg. 2004; 62(11):1331-1340.
101. Day CJ, Robert T. Three-dimensional assessment of the facial soft tissue changes that occur postoperatively in orthognathic patients. World J Orthod. 2006; 7(1):15-26.
102. Harrison JA, Nixon MA, Fright WR, Snape L. Use of hand-held laser scanning in the assessment of facial swelling: a preliminary study. Br J Oral Maxillofac Surg. 2004; 42(1):8-17.
103. Swennen GRJ, Barth EL, Eulzer C, Schutyzer F. The use of a new 3D splint and double CT scan procedure to obtain an accurate anatomic virtual augmented model of the skull. Int J Oral Maxillofac Surg. 2007; 36(2):146-152.
104. Hassfeld S, Mühling J, Zoller J. Intraoperative navigation in oral and maxillofacial surgery. Int J Oral Maxillofac Surg. 1995; 24(1Pt2):111-119.
105. Marmulla R, Lüth T, Mühling J, Hassfeld S. Automated laser registration in image-guided surgery: evaluation of the correlation between laser scan resolution and navigation accuracy. Int J Oral Maxillofac Surg. 2004; 33(7):642-648.
106. Wagner A, Ploder O, Ensilidis G, Truppe M, Ewers R. Image-guided surgery. Int J Oral Maxillofac Surg. 1996; 25(2):147-151.
107. Marmulla R, Niederdellmann H. Contrôle de la précision de la position des segments osseux pendant la navigation chirurgicale. Rev Stomatol Chir Maxillofac. 1998; 99(4):184-187.
108. Shuhaiber JH. Augmented reality in surgery. Arch Surg. 2004; 139(2):170-174.
109. Cleary K, Nguyen C. State of art in surgical robotics: clinical application and technology challenges. Comput Aided Surg. 2001; 6(6):312-328.
110. Korb W, Marmulla R, Raczkowsky J, Mühling J, Hassfeld S. Robots in the operating theatre-chances and challenges. Int J Oral Maxillofac Surg. 2004; 33(8):721-732.
111. Fortin T, Bosson JL, Isidori M, Blanchet E. Effect of flapless surgery on pain experienced in implant placement using an image-guided system. Int J Oral Maxillofac Implants. 2006; 21(2):298-304.
112. Verstreken K, Van Cleynenbreugel J, Marchal G, Naert I, Suetens P, van Steenberghe D. Computerassisted planning of oral implant surgery: a three-dimensional approach. Int J Oral Maxillofac Implants. 1996; 11(6):806-808.
113. Ganz SD. Presurgical planning with CT-derived fabrication of surgical guides. J Oral Maxillofac Surg. 2005; 63(9Suppl2):59-71.
114. Parel SM, Triplett RG. Interactive imaging for implant planning placemcent, and prosthetic construction. J Oral Maxillofac Surg. 2004; 62(9Suppl2):41-47.
115. Rocci A, Martignoni M, Gottlow J. Immediate loading in the maxilla using flapless surgery, implants placed in predetermined positions, and prefabricated provisional restorations: a retrospective 3-year clinical study. Clin Implant Dent Relat Res. 2003; 5(Suppl1):29-36.
116. Spector L. Computer-aided dental implant planning. Dent Clin North Am. 2008; 52(4):761-775.
117. Engleke W, Capobianco M. Flapless sinus floor augmentation using endoscopy combined with CT scan-designed surgical templates: method and report of 6 consecutive cases. Int J Oral Maxillofac Implants. 2005; 20(6):891-897.
118. Chiarelli T, Lamma E, Sansoni T. A fully 3D work context for oral implant planning and simulation. Int J Comput Assist Radiol Surg. 2010; 5(1):57-67.
119. BouSerhal C, Jacobs R, Quirynen M, van Steenberghe D. Imaging technique selection for the preoperative planning of oral implants: a review of the literature. Clin Implant Dent Relat Res. 2002; 4(3):156-172.
120. Ito K, Gomi Y, Sato S, Arai Y, Shinoda K. Clinical application of a new compact CT system to assess 3D images for the preoperative treatment planning of implants in the posterior mandible. Acase report. Clin Oral Implants Res. 2001; 12(5):539-542.
121. Tardieu PB, Vrielinck L, Escolano E. Computer-assisted implant placement. A case report: treatement of the mandible. Int J Oral Maxillofac Implants. 2003; 18(4):599-604.
122. Yeh S, Monaco EA, Buhite RJ. Using transitional implants as fixation screws to stabilize a surgical template for accurate implant placement: a clinical report. J Prosthet Dent. 2005; 93(6):509-513.
123. Gaggl A, Schultes G, Santler G, Karcher H. Treatment planning for sinus lift augmentations through use of 3-dimensional milled models derived from computed tomography scans: a report of 3 cases. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 1998; 86(4):388-392.
124. Reychler H, Olszewski R. Intracerebral penetration of a zygomatic dental implant and consequent therapeutic dilemmas: case report. Int J Oral Maxillofac Implants. 2010; 25(2):416-418.
125. Vrielinck L, Politis C, Schepers S, Pauwels M, Naert I. Image-based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides. Preliminary results from a prospective clinical follow-up study. Int J Oral Maxillofac Surg. 2003; 32(1):7-14.
126. Rubio Serrano M, Albalat Estela S, Peñarrocha Diago M, Peñarrocha Diago M. Software applied to oral implantology: update. Med Oral Patol Oral Cir Bucal. 2008; 13(10):E661-665.
127. Dérand P, Hirsch JM. Virtual bending of mandibular reconstruction plates using a computer-aided design. J Oral Maxillofac Surg. 2009; 67(8):1640-1643.
128. Zhou LB, Shang HT, He LS, Bo B, Liu GC, Liu YP, Zhao JL. Accurate reconstruction of discontinuous mandible using a reverse engineering/computer-aided design/rapid prototyping technique: a preliminary clinical study. J Oral Maxillofac Surg. 2010; 68(9):2115-2121.
129. Toro C, Robiony M, Costa F, Zerman N, Politi M. Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction. Head Face Med. 2007; 15(3):5.
130. Santler G, Kärcher H, Ruda C. Indications and limitations of three-dimensional models in craniomaxillofacial surgery. J Craniomaxillofac Surg. 1998; 26(1):11-16.
131. Cheung LK, Wong MC, Wong LL. Refinement of facial reconstructive surgery by stereo-model planning. Ann R Australas Coll Dent Surg. 2002; 16:129-132.
132. Choi JY, Choi JH, Kim NK, Kim Y, Lee JK, Kim MK, Lee JH, Kim MJ. Analysis of errors in medical rapid prototyping models. Int J Oral Maxillofac Surg. 2002; 31(1):23-32.
133. Robiony M, Salvo I, Costa F, Zerman N, Bandera C, Filippi S, Felice M, Politi M. Accuracy of virtual reality and stereolithographic models in maxillo-facial surgical planning. J Craniofac Surg. 2008; 19(2): 482-489.
134. Chow LK, Cheung LK. The usefulness of stereomodels in maxillofacial surgical management. J Oral Maxillofac Surg. 2007; 65(11):2260-2268.
135. Sinn DP, Cillo JE Jr, Miles BA. Stereolithography for craniofacial surgery. J Craniofac Surg. 2006; 17(5):869-875.
136. Toso F, Zuiani C, Vergendo M, Salvo I, Robiony M, Politi M, Bazzocchi M. Usefulness of computed tomography in pre-surgical evaluation of maxillo-facial pathology with rapid prototyping and surgical pre-planning by virtual reality. Radiol Med. 2005; 110(5-6):665-675.
137. Silva DN, Gerhardt de Oliveira M, Meurer E, Meurer MI, Lopes da Silva JV, Santa-Bárbara A. Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction. J Craniomaxillofac Surg. 2008; 36(8):443-449.
138. Berry E, Brown JM, Connell M, Craven CM, Efford ND, Radjenovic A, Smith MA. Preliminary experience with medical applications of rapid prototyping by selective laser sintering. Med Eng Phys. 1997; 19(1):90-96.
139. Ibrahim D, Broilo TL, Heitz C, de Oliveira MG, de Oliveira HW, Nobre SM, Dos Santos Filho JH, Silva DN. Dimensional error of selective laser sintering, three-dimensional printing and PolyJet models in the reproduction of mandibular anatomy. J Craniomaxillofac Surg. 2009; 37(3):167-173.
140. Winder J, Bibb R. Medical rapid prototyping technologies: state of the art and current limitations for application in oral and maxillofacial surgery. J Oral Maxillofac Surg. 2005; 63(7): 1006-1015.
141. Cohen A, Laviv A, Berman P, Nashef R, Abu-Tair J. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2009; 108(5):661-666.
142. Schicho K, Figl M, Seemann R, Ewers R, lambrecht JT, Wagner A, Watzinger F, Baumann A, Kainberger F, Fruehwald J, Klug C. Accuracy of treatment planning based on stereolithography in computer assisted surgery. Med Phys. 2006; 33(9):3408-3459.
143. Bill JS, Reuther JF. Rapid prototyping in planning reconstructive surgery of the head and neck. Review and evaluation of indications in clinical use. Mund Kiefer Gesichtschir. 2004; 8(3):135-153.
144. Lin CC, Lo LJ, Lee MY, Wong HF, Chen YR. Craniofacial surgical simulation: application of threedimensional medical imaging and rapid prototyping models. Chang Gung Med J. 2001; 24(4): 229-238.
145. Lieger O, Richards R, Liu M, Lloyd T. Computer-assisted design and manufacture of implants in the late reconstruction of extensive orbital fractures. Arch Facial Plast Surg. 2010; 12(3):186-191.
146. Williams JV, Revington PJ. Novel use of an aerospace selective laser sintering machine for rapid prototyping of an orbital blowout fracture. Int J Oral Maxillofac Surg. 2010; 39(2):182-184.
147. Kozakiewicz M, Elgalal M, Loba P, Komuński P, Arkuszewski P, Broniarczyk-Loba A, Stefańczyk L. Clinical application of 3D pre-bent titanium implants for orbital floor fractures. J Craniomaxillofac Surg. 2009; 37(4): 229-234.
148. Sannomiya EK, Reis SA, Asaumi J, Silva JV, Barbara AS, Kishi K. Clinical and radiographic presentation and preparation of the prototyping model for pre-surgical planning in Apert's syndrome. Dentomaxillofac Radiol. 2006; 35(2): 119-124.
149. Asaumi J, Kawai N, Honda Y, Shigehara H, Wakasa T, Kishi K. Comparison of three-dimensional computed tomography with rapid prototype models in the management of coronoid hyperplasia. Dentomaxillofac Radiol. 2001; 30(6):330-335.
150. Bai S, Bo B, Bi Y, Wang B, Zhao J, Liu Y, Feng Z, Shang H, Zhao Y. CAD/CAM surface templates as an alternative to the intermediate wafer in orthognathic surgery. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2010; 110(5):e1-e7.
151. Mavili ME, Canter HI, Saglam-Aydinatay B, Kamaci S, Kocadereli I. Use of three-dimensional medical modeling methods for precise planning of orthognathic surgery. J Craniofac Surg. 2007; 18(4):740-747.
152. Wong TY, Fang JJ, Chung CH, Huang JS, Lee JW. Comparison of 2 methods of making surgical models for correction of facial asymmetry. J Oral Maxillofac Surg. 2005; 63(2):200-208.
153. Chen XY, Chen SL, Zhang X, Li JP, Deng W. Accuracy of intraoral vertical ramus osteotomy with a stereolithographic template. Ann Plast Surg. 2011; 66(1):88-91.
154. Nikzad S, Azari A, Ghassemzadeh A. Modified flapless dental implant surgery for planning treatment in a maxilla including sinus lift augmentation through use of virtual surgical planning and a 3-dimensional model. J Oral Maxillofac Surg. 2010; 68(9):2291-2298.
155. Robiony M. Distraction osteogenesis: a method to improve facial balance in asymmetric patients. J Craniofac Surg. 2010; 21(2):508-512.
156. Varol A, Basa S. The role of computer-aided 3D surgery and stereolithographic modelling for vector orientation in premaxillary and trans-sinusoidal maxillary distraction osteogenesis. Int J Med Robot. 200; 5(2):198-206.
157. Sannomiya EK, Silva JV, Brito AA, Saez DM, Angelieri F, Dalben Gda S. Surgical planning for resection of an ameloblastoma and reconstruction of the mandible using a selective laser sintering 3D biomodel. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2008; 106(1):e36-e40.
158. Yeung RW, Samman N, Cheung LK, Zhang C, Chow RL. Stereomodel-assisted fibula flap harvest and mandibular reconstruction. J Oral Maxillofac Surg. 2007; 65(6):1128-1134.
159. Singare S, Dichen L, Bingheng L, Yanpu L, Zhenyu G, Yaxiong L. Design and fabrication of custom mandible titanium tray based on rapid prototyping. Med Eng Phys. 2004; 26(8):671-676.
160. Roser SM, Ramachandra S, Blair H, Grist W, Carlson GW, Christensen AM, Weimer KA, Steed MB. The accuracy of virtual surgical planning in free fibula mandibular reconstruction: comparison of planned and final results. J Oral Maxillofac Surg. 2010; 68(11):2824-2832.
161. He Y, Zhu HG, Zhang ZY, He J, Sader R. Oral Three-dimensional model simulation and reconstruction of composite total maxillectomy defects with fibula osteomyocutaneous flap flow-through from radial forearm flap. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2009; 108(6):e6-e12.
162. Wu T, Engelhardt M, Fieten L, Popovic A, Radermacher K. Anatomically constrained deformation for design of cranial implant: methodology and validation. Med Image Comput Comput Assist Interv. 2006; 9(Pt 1):9-16.
163. Agner C, Dujovny M, Park H. Delayed minimally invasive cranioplasty. Minim Invasive Neurosurg. 2003; 46(3):186-190.
164. Fallahi B, Foroutan M, Motavalli S, Dujovny M, Limaye S. Computer-aided manufacturing of implants for the repair of large cranial defects: an improvement of the stereolithography technique. Neurol Res. 1999; 21(3):281-286.
165. Maravelakis E, David K, Antoniadis A, Manios A, Bilalis N, Papaharilaou Y. Reverse engineering techniques for cranioplasty: a case study. J Med Eng Technol. 2008; 32(2):115-121.
166. Chiarini L, Figurelli S, Pollastri G, Torcia E, Ferrari F, Albanese M, Nocini PF. Cranioplasty using acrylic material: a new technical procedure. J Craniomaxillofac Surg. 2004; 32(1):5-9.
167. Miyake H, Ohta T, Tanaka H. A new technique for cranioplasty with L-shaped titanium plates and combination ceramic implants composed of hydroxyapatite and tricalcium phosphate (Ceratite). Neurosurgery. 2000; 46(2):414-418.
168. Ekstrand K, Hirsch JM. Malignant tumors of the maxilla: virtual planning and real-time rehabilitation with custom-made R-zygoma fixtures and carbon-graphite fiber-reinforced polymer prosthesis. Clin Implant Dent Relat Res. 2008; 10(1):23-29.
169. Ciocca L, De Crescenzio F, Fantini M, Scotti R. Rehabilitation of the nose using CAD/CAM and rapid prototyping technology after ablative surgery of squamous cell carcinoma: a pilot clinical report. Int J Oral Maxillofac Implants. 2010; 25(4):808-812.
170. Zhang S, Liu X, Xu Y, Yang C, Undt G, Chen M, Haddad MS, Yun B. Application of rapid prototyping for temporomandibular joint reconstruction. J Oral Maxillofac Surg. 2011; 69(2):432-438.
171. Feiyun P, Wei L, Jun C, Xin X, Zhuojin S, Fengguo Y. Simultaneous correction of bilateral temporomandibular joint ankylosis with mandibular micrognathia using internal distraction osteogenesis and 3-dimensional craniomaxillofacial models. J Oral Maxillofac Surg. 2010; 68(3):571-577.
172. Nagy K, Mommaerts MY. Advanced s(t)imulator for cleft palate repair techniques. Cleft Palate Craniofac J. 2009; 46(1):1-5.
173. Kobayashi M, Nakajima T, Mori A, Tanaka D, Fujino T, Chiyokura H. Three-dimensional computer graphics for surgical procedure learning: Web three-dimensional application for cleft lip repair. Cleft Palate Craniofac J. 2006; 43(3):266-271.
174. Leser CP, Jepsen SA. A mandibular surgical training model. Gen Dent. 2008; 56(2):149-154.
175. Lambrecht JT, Berndt D, Christensen AM, Zehnder M. Haptic model fabrication for undergraduate and postgraduate teaching. Int J Oral Maxillofac Surg. 2010; 39(12):1226-1229.
176. Choi JY, Song KG, Baek SH. Virtual model surgery and wafer fabrication for orthognathic surgery, Int J Oral Maxillofac Surg. 2009; 38(12):1306-1310.
177. Gateno J, Xia JJ, Teichgraeber JF, Christensen AM, Lemoine JJ, Liebschner MA, Gliddon MJ, Briggs ME. Clinical feasibility of computer-aided surgical simulation (CASS) in the treatment of complex cranio-maxillofacial deformities. J Oral Maxillofac Surg. 2007; 65(4):728-734.
178. Metzger MC, Hohlweg-Majert B, Schwarz U, Teschner M, Hammer B, Schmelzeisen R. Manufacturing splints for orthognathic surgery using a three-dimensional printer. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2008; 105(2):e1-e7.
179. Olszewski R, Tranduy K, Reychler H. Innovative procedure for computer-assisted genioplasty: threedimensional cephalometry, rapid-prototyping model and surgical splint. Int J Oral Maxillofac Surg. 2010; 39(7):721-724.
180. Clijmans T, Mommaerts M, Gelaude F, Suetens P, Sloten JV. Skull reconstruction planning transfer to the operation room by thin metallic templates: clinical results. J Craniomaxillofac Surg. 2008; 36(2):66-74.
181. Liu XJ, Gui L, Mao C, Peng X, Yu GY. Applying computer techniques in maxillofacial reconstruction using a fibula flap: a messenger and an evaluation method. J Craniofac Surg. 2009; 20(2):372-377.
182. Leiggener C, Messo E, Thor A, Zeilhofer HF, Hirsch JM. A selective laser sintering guide for transferring a virtual plan to real time surgery in composite mandibular reconstruction with free fibula osseous flaps. Int J Oral Maxillofac Surg. 2009; 38(2):187-192.
183. Fortin T, Bosson JL, Coudert JL, Isidori M. Reliability of preoperative planning of an image-guided system for oral implant placement based on 3-dimensional images: an in vivo study. Int J Oral Maxillofac Implants. 2003; 18(6):886-893.
184. Sarment DP, Sukovic P, Clinthorne N. Accuracy of implant placement with a stereolithographic surgical guide. Int J Oral Maxillofac Implants. 2003; 18(4):571-577.
185. Arisan V, Karabuda ZC, Ozdemir T. Accuracy of two stereolithographic guide systems for computeraided implant placement: a computed tomography-based clinical comparative study. J Periodontol. 2010; 81(1):43-51.
186. Sammartino G, Della Valle A, Marenzi G, Gerbino S, Martorelli M, di Lauro AE, di Lauro F. Stereolithography in oral implantology: a comparison of surgical guides. Implant Dent. 2004; 13(2):133-139.
187. Teubner E, Rohner D, Deak A, Lorenzon A, Marinello CP. Navigated implant placement using a bone supported CT-guided surgical template. Case report. Schweiz Monatsschr Zahnmed. 2009; 119(12):1211-1234.
188. Jayme SJ, Muglia VA, de Oliveira RR, Novaes AB. Optimization in multi-implant placement for immediate loading in edentulous arches using a modified surgical template and prototyping: a case report. Int J Oral Maxillofac Implants. 2008; 23(4):759-762.
189. Arisan V, Karabuda CZ, Ozdemir T. Implant surgery using bone-and mucosa-supported stereolithographic guides in totally edentulous jaws: surgical and post-operative outcomes of computer-aided vs. standard techniques. Clin Oral Implants Res. 2010; 21(9):980-988.
190. Sohmura T, Kusumoto N, Otani T, Yamada S, Wakabayashi K, Yatani H. CAD/CAM fabrication and clinical application of surgical template and bone model in oral implant surgery. Clin Oral Implants Res. 2009; 20(1):87-93.
191. Nickenig HJ, Wichmann M, Hamel J, Schlegel KA, Eitner S. Evaluation of the difference in accuracy between implant placement by virtual planning data and surgical guide templates versus the conventional free-hand method-a combined in vivo-in vitro technique using cone-beam CT (Part II). J Craniomaxillofac Surg. 2010; 38(7):488-493.
192. Chen X, Yuan J, Wang C, Huang Y, Kang L. Modular preoperative planning software for computeraided oral implantology and the application of a novel stereolithographic template: a pilot study. Clin Implant Dent Relat Res. 2010; 12(3):181-193.
193. van Steenberghe D, Glauser R, Blombäck U, Andersson M, Schutyser F, Pettersson A, Wendelhag I. A computed tomographic scan-derived customized surgical template and fixed prosthesis for flapless surgery and immediate loading of implants in fully edentulous maxillae: a prospective multicenter study. Clin Implant Dent Relat Res. 2005; 7(Suppl 1):S111-S120.
194. Yong LT, Moy PK. Complications of computer-aided-design/computer-aided-machining-guided (NobelGuide) surgical implant placement: an evaluation of early clinical results. Clin Implant Dent Relat Res. 2008; 10(3):123-127.
195. De Santis D, Canton LC, Cucchi A, Zanotti G, Pistoia E, Nocini PF. Computer-assisted surgery in the lower jaw: double surgical guide for immediately loaded implants in postextractive sites-technical notes and a case report. J Oral Implantol. 2010; 36(1):61-68.
196. Mandelaris GA, Rosenfeld AL. Alternative applications of guided surgery: precise outlining of the lateral window in antral sinus bone grafting. J Oral Maxillofac Surg. 2009; 67(11 Suppl):23-30.
197. Fortin T, Isidori M, Bouchet H. Placement of posterior maxillary implants in partially edentulous patients with severe bone deficiency using CAD/CAM guidance to avoid sinus grafting: a clinical report of procedure. Int J Oral Maxillofac Implants. 2009; 24(1):96-102.
198. Zhang X, Chen SL, Zhang JM, Chen JL. Fabrication of a surgical template for orbital implant placement: a case report. Int J Oral Maxillofac Implants. 2010; 25(4):826-830.
199. Widmann G, Stoffner R, Bale R. Errors and error management in image-guided craniomaxillofacial surgery. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2009; 107(5):701-715. Review.
200. Heiland M, Habermann CR, Schmelzle R. Indications and limitations of intraoperative navigation in maxillofacial surgery. J Oral Maxillofac Surg. 2004: 62(9):1059-1063.
201. Brief J, Edinger D, Hassfeld S, Eggers G. Accuracy of image-guided implantology. Clin Oral Implants Res. 2005; 16(4):495-501.
202. Hoffmann J, Westendorff C, Schneider M, Reinert S. Accuracy assessment of image-guided implant surgery: an experimental study. Int J Oral Maxillofac Implants. 2005; 20(3):382-386.
203. Strong EB, Rafii A, Holhweg-Majert B, Fuller SC, Metzger MC. Comparison of 3 optical navigation systems for computer-aided maxillofacial surgery. Arch Otolaryngol Head Neck Surg. 2008; 134(10):1080-1084.
204. Wagner A, Schicho K, Birkfellner W, Figl M, Seemann R, König F, Kainberger F, Ewers R. Quantitative analysis of factors affecting intraoperative precision and stability of optoelectronic and electromagnetic tracking systems. Med Phys. 2002; 29(5):905-912.
205. Rosenow JM, Sootsman WK. Application accuracy of an electromagnetic field-based image-guided navigation system. Stereotact Funct Neurosurg. 2007; 85(2-3):75-81.
206. Atuegwu NC, Galloway RL. Volumetric characterization of the Aurora magnetic tracker system for image-guided transorbital endoscopic procedures. Phys Med Biol. 2008; 53(16):4355-4368.
207. Malthan D, Ehrlich G, Stallkamp J, Dammann F, Schwaderer E, Maassen MM. Automated registration of partially defective surfaces by local landmark identification. Comput Aided Surg. 2003; 8(6) 300-309.
208. Widmann G, Stoffner R, Schullian P, Widmann R, Keiler M, Zangerl A, Puelacher W, Bale RJ. Comparison of the accuracy of invasive and noninvasive registration methods for image-guided oral implant surgery. Int J Oral Maxillofac Implants. 2010; 25(3):491-498.
209. Luebbers HT, Messmer P, Obwegeser JA, Zwahlen RA, Kikinis R, Graetz KW, Matthews F. Comparison of different registration methods for surgical navigation in cranio-maxillofacial surgery. J Craniomaxillofac Surg. 2008; 36(2):109-116.
210. Eggers G, Mühling J, Marmulla R. Image-to-patient registration techniques in head surgery. Int J Oral Maxillofac Surg. 2006; 35(12):1081-1095. Review.
211. Lee JD, Huang CH, Wang ST, Lin CW, Lee ST. Fast-MICP for frameless image-guided surgery. Med Phys. 2010; 37(9):4551-4559.
212. Ewers R, Schicho K, Truppe M, Seeman R, Reichwein A, Figl M, Wagner A. Computer-aided navigation in dental implantology: 7 years of clinical experience. J Oral Maxillofac Surg. 2004; 62(3):329-334.
213. Nijmeh AD, Goodger NM, Hawkes D, Edwards PJ, McGurk M. Image-guided navigation in oral and maxillofacial surgery. Br J Oral Maxillofac Surg. 2005; 43(4):294-302.
214. Siessegger M, Schneider BT, Mischkowski RA, Lazar F, Krug B, Klepser B, Zoller JE. Use of imageguided navigation system in dental implant surgery in anatomically complex operation sites. J Craniomaxillofac Surg. 2001; 29(5):276-281.
215. Wanschitz F, Birkfellner W, Watzinger F, Schopper C, Patruta S, Kainberger F, Figl M, Kettenbach J, Bergmann H, Ewers R. Evaluation of accuracy of computer-aided intraoperative positioning of endosseous oral implants in the edentulous mandible. Clin Oral Implants Res. 2002; 13(1):59-64.
216. Wagner A, Wanschitz F, Birkfellner W, Zauza K, Klug C, Schicho K, Kainberger F, Czerny C, Bergmann H, Ewers R. Computer-aided placemcent of endosseous oral implants in patients after ablative tumour surgery: assessment of accuracy. Clin Oral Implants Res. 2003; 14(3):340-348.
217. Beumer HW, Puscas L. Computer modeling and navigation in maxillofacial surgery. Curr Opin Otolaryngol Head Neck Surg. 2009; 17(4):270-273. Review.
218. Tepper OM, Sorice S, Hershman GN, Saadeh P, Levine JP, Hirsch D. Use of virtual 3-dimensional surgery in post-traumatic craniomaxillofacial reconstruction. J Oral Maxillofac Surg. 2011; 69(3) 733-741.
219. Chen X, Lin Y, Wang C, Shen G, Zhang S, Wang X. A surgical navigation system for oral and maxillofacial surgery and its application in the treatment of old zygomatic fractures. Int J Med Robot. 2011; 7(1):42-50.
220. Ogino A, Onishi K, Maruyama Y. Intraoperative repositioning assessment using navigation system in zygomatic fracture. J Craniofac Surg. 2009; 20(4):1061-1065.
221. Yu H, Shen G, Wang X, Zhang S. Navigation-guided reduction and orbital floor reconstruction in the treatment of zygomatic-orbital-maxillary complex fractures. J Oral Maxillofac Surg. 2010; 68(1):28-34.
222. Collyer J. Stereotactic navigation in oral and maxillofacial surgery. Br J Oral Maxillofac Surg. 2010; 48(2):79-83. Review.
223. Bell RB, Markiewicz MR. Computer-assisted planning, stereolithographic modeling, and intraoperative navigation for complex orbital reconstruction: a descriptive study in a preliminary cohort. J Oral Maxillofac Surg. 2009; 67(12):2559-2570.
224. Tao X, Zhu F, Chen W, Zhu S. The application of virtual endoscopy with computed tomography in maxillofacial surgery. Chin Med J (Engl); 2003, 116(5):679-681.
225. Li WZ, Zhang MC, Li SP, Zhang LT, Huang Y. Application of computer-aided three-dimensional skull model with rapid prototyping technique in repair of zygomatico-orbito-maxillary complex fracture. Int J Med Robot. 2009; 5(2):158-163.
226. Klug C, Schicho K, Ploder O, Yerit K, Watzinger F, Ewers R, Baumann A, Wagner A. Point-to-point computer-assisted navigation for precise transfer of planned zygoma osteotomies from the stereolithographic model into reality. J Oral Maxillofac Surg. 2006; 64(3):550-559.
227. Pham AM, Rafii AA, Metzger MC, Jamali A, Strong EB. Computer modeling and intraoperative navigation in maxillofacial surgery. Otolaryngol Head Neck Surg. 2007; 137(4):624-631.
228. Beumer HW, Puscas L. Computer modeling and navigation in maxillofacial surgery. Curr Opin Otolaryngol Head Neck Surg. 2009; 17(4):270-273. Review.
229. Schramm A, Suarez-Cunqueiro MM, Rücker M, Kokemueller H, Bormann KH, Metzger MC, Gellrich NC. Computer-assisted therapy in orbital and mid-facial reconstructions. Int J Med Robot. 2009; 5(2):111-124. Review.
230. Schramm A, Suarez-Cunqueiro MM, Barth EL, Essig H, Bormann KH, Kokemueller H, Rücker M, Gellrich NC. Computer-assisted navigation in craniomaxillofacial tumors. J Craniofac Surg. 2008; 19(4):1067-1074.
231. Nijmeh AD, Goodger NM, Hawkes D, Edwards PJ, McGurk M. Image-guided navigation in oral and maxillofacial surgery. Br J Oral Maxillofac Surg. 2005; 43(4):294-302. Review.
232. Ewers R, Schicho K, Undt G, Wanschitz F, Truppe M, Seemann R, Wagner A. Basic research and 12 years of clinical experience in computer-assisted navigation technology: a review. Int J Oral Maxillofac Surg. 2005; 34(1):1-8. Review.
233. Bell RB. Computer planning and intraoperative navigation in cranio-maxillofacial surgery; Oral Maxillofac Surg Clin North Am. 2010; 22(1):135-156. Review;
234. Casap N, Wexler A, Eliashar R. Computerized navigation for surgery of the lower jaw: comparison of 2 navigation systems. J Oral Maxillofac Surg. 2008; 66(7):1467-1475.
235. Voss PJ, Leow AM, Schulze D, Metzger MC, Liebehenschel N, Schmelzeisen R. Navigation-guided resection with immediate functional reconstruction for high-grade malignant parotid tumour at skull base. Int J Oral Maxillofac Surg. 2009; 38(8):886-890.
236. Lübbers HT, Jacobsen C, Könü D, Matthews F, Grätz KW, Obwegeser JA. Surgical navigation in cranio-maxillofacial surgery: an evaluation on a child with a cranio-facio-orbital tumour. Br J Oral Maxillofac Surg. 2011; 49(7):532-537.
237. Feichtinger M, Aigner RM, Santler G, Kärcher H. Case report: fusion of positron emission tomography (PET) and computed tomography (CT) images for image-guided endoscopic navigation in maxillofacial surgery: clinical application of a new technique. J Craniomaxillofac Surg. 2007; 35(6-7):322-328.
238. Feichtinger M, Pau M, Zemann W, Aigner RM, Kärcher H. Intraoperative control of resection margins in advanced head and neck cancer using a 3D-navigation system based on PET/CT image fusion. J Craniomaxillofac Surg. 2010; 38(8):589-594.
239. Reisner LA, King BW, Klein MD, Auner GW, Pandya AK. A prototype biosensor-integrated imageguided surgery system. Int J Med Robot. 2007; 3:82-88.
240. Casap N, Tarazi E, Wexler A, Sonnenfeld U, Lustmann J. Intraoperative computerized navigation for flapless implant surgery and immediate loading in the edentulous mandible. Int J Oral Maxillofac Implants. 2005; 20(1):92-98.
241. Gaggl A, Schultes G. Assessment of accuracy of navigated implant placement in the maxilla. Int J Oral Maxillofac Implants. 2002; 17(2):263-270.
242. Ng FC, Ho KH, Wexler A. Computer-assisted navigational surgery enhances safety in dental implantology. Ann Acad Med Singapore. 2005; 34(5):383-388.
243. Randelzhofer P, de la Barrera JM, Spielberg M, Kurtz C, Strub JR. Three-dimensional navigation in oral implantology: a preliminary investigation. Int J Periodontics Restorative Dent. 2001; 21(6):617-626.
244. Miller RJ, Bier J. Surgical navigation in oral implantology. Implant Dent. 2006; 15(1):41-47.
245. Fortin T, Isidori M, Blanchet E, Perriat M, Bouchet H, Coudert JL. An image-guided system-drilled surgical template and trephine guide pin to make treatment of completely edentulous patients easier: a clinical report on immediate loading. Clin Implant Dent Relat Res. 2004; 6(2):111-119.
246. Casap N, Wexler A, Lustmann J. Image-guided navigation system for placing dental implants. Compend Contin Educ Dent. 2004; 25(10):783-784, 786, 788.
247. Wexler A, Tzadok S, Casap N. Computerized navigation surgery for the safe placement of palatal implants. Am J Orthod Dentofacial Orthop. 2007; 131(4 Suppl):S100-S105.
248. Verma SN, Schow SR, Stone BH, Triplett RG. Applications of surgical navigational systems for craniofacial bone-anchored implant placement. Int J Oral Maxillofac Implants. 2010; 25(3):582-588.
249. Xiaojun C, Ming Y, Yanping L, Yiqun W, Chengtao W. Image guided oral implantology and its application in the placement of zygoma implants. Comput Methods Programs Biomed. 2009; 93(2):162-173.
250. Xia JJ, Gateno J, Teichgraeber JF. A new paradigm for complex midface reconstruction: a reversed approach. J Oral Maxillofac Surg. 2009; 67(3):693-703.
251. Mazzoni S, Badiali G, Lancellotti L, Babbi L, Bianchi A, Marchetti C. Simulation-guided navigation: a new approach to improve intraoperative three-dimensional reproducibility during orthognathic surgery. J Craniofac Surg. 2010; 21(6):1698-1705.
252. Matsuo A, Kono M, Toyoda J, Nakai T, Tsuzuki M, Chiba H. Navigation surgery for Le Fort 1 osteotomy in a fibrous dysplasia patient. Odontology. 2010; 98(2):181-184.
253. Yu HB, Shen GF, Zhang SL, Wang XD, Wang CT, Lin YP. Navigation-guided gap arthroplasty in the treatment of temporomandibular joint ankylosis. Int J Oral Maxillofac Surg. 2009; 38(10):1030-1035.
254. Wagner A, Undt G, Watzinger F, Wanschitz F, Schicho K, Yerit K, Kermer C, Birkfellner W, Ewers R. Principles of computer-assisted arthroscopy of the temporomandibular joint with optoelectronic tracking technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2001; 92(1):30-37.
255. Belli E, Matteini C, D'Andrea GC, Mazzone N. Navigator system guided endoscopic intraoral approach for remodelling of mandibular condyle in Garré syndrome. J Craniofac Surg. 2007; 18(6):1410-1415.
256. Lübbers HT, Matthews F, Zemann W, Grätz KW, Obwegeser JA, Bredell M. Registration for computer-navigated surgery in edentulous patients: A problem-based decision concept. J Craniomaxillofac Surg. 2011; 39(6):453-458.
257. Hoppe H, Salb T, Raczkowsky J, Hassfeld S, Moctezuma JL, Wörn H, Dillmann R. Expanded reality in head surgery. Biomed Tech (Berl). 2002; 47(Suppl1Pt2):946-949.
258. Mischkowski RA, Zinser MJ, Kübler AC, Krug B, Seifert U, Zöller JE. Application of an augmented reality tool for maxillary positioning in orthognathic surgery-a feasibility study. J Craniomaxillofac Surg. 2006; 34(8):478-483.
259. Filipo R, Pichi B, Bertoli GA, De Seta E. Video-based system for intraoperative facial nerve monitoring: comparison with electromyography. Otol Neurotol. 2002; 23(4):594-597.
260. Poukens J, Haex J, Riediger D. The use of rapid prototyping in the preoperative planning of distraction osteogenesis of the cranio-maxillofacial skeleton. Comput Aided Surg. 2003; 8(3):146-154.
261. Mitsugi M, Ito O, Alcalde RE. Maxillary bone transportation in alveolar cleft-transport distraction osteogenesis for treatment of alveolar cleft repair. Br J Plast Surg. 2005; 58(5):619-625.
262. Cavaliere CM, Buchman SR. Mandibular distraction in the absence of an ascending ramus and condyle. J Craniofac Surg. 2002; 13(4):527-532.
263. Yamaji KE, Gateno J, Xia JJ, Teichgraeber JF. New internal Le Fort I distractor for the treatment of midface hypoplasia. J Craniofac Surg. 2004; 15(1):124-127.
264. Gaggl A, Schultes G, Santler G, Kärcher H. Three-dimensional planning of alveolar ridge distraction by means of distraction implants. Comput Aided Surg. 2000; 5(1):35-41.
265. Kanno T, Mitsugi M, Sukegawa S, Hosoe M, Furuki Y. Computer-simulated bi-directional alveolar distraction osteogenesis. Clin Oral Implants Res. 2008; 19(12):1211-1218.
266. Minoretti R, Triaca A, Antonini M, Merz B. Intra-oral multiaxis mandubular distraction osteogenesis. Clinical analysis of the first six years, in Bell Guerrero (eds). Distraction osteogenesis of the facial skeleton, BC Decker Ed, 2007:359-372.
267. Tharanon W, Sinn DP. Mandibular distraction osteogenesis with multidirectional extraoral distraction device in hemifacial microsomia patients: three-dimensional treatment planning, prediction tracings, and case outcomes. J Craniofac Surg. 1999; 10(3):202-213.
268. Dorfman DW, Ciminello FS, Wong GB. Craniofacial distractor applicator. J Craniofac Surg. 2009; 20(2):475-477.
269. Gateno J, Teichgraeber JF, Xia JJ. Three-dimensional surgical planning for maxillary and midface distraction osteogenesis, J Craniofac Surg. 2003; 14(6):833-839.
270. Yeshwant K, Seldin EB, Gateno J, Everett P, White CL, Kikinis R, Kaban LB, Troulis MJ. Analysis of skeletal movements in mandibular distraction osteogenesis. J Oral Maxillofac Surg. 2005; 63(3):335-340.
271. Robiony M, Salvo I, Costa F, Zerman N, Bazzocchi M, Toso F, Bandera C, Filippi S, Felice M, Politi M. Virtual reality surgical planning for maxillofacial distraction osteogenesis: the role of reverse engineering rapid prototyping and cooperative work. J Oral Maxillofac Surg. 2007; 65(6):1198-1208.
272. Kofod T, Pedersen TK, Nørholt SE, Jensen J. Stereolithographic models for simulation and transfer of vector in vertical distraction of the mandibular ramus: a technical note. J Craniofac Surg. 2005; 16(4):608-614.
273. Yamada A, Imai K, Nomachi T, Fujimoto T, Sakamoto H, Kitano S. Cranial distraction for plagiocephaly: quantitative morphologic analyses of cranium using three-dimensional computed tomography and a life-size model. J Craniofac Surg. 2005; 16(4):688-693.
274. Minami K, Mori Y, Tae-Geon K, Shimizu H, Ohtani M, Yura Y. Maxillary distraction osteogenesis in cleft lip and palate patients with skeletal anchorage. Cleft Palate Craniofac J. 2007; 44(2):137-141.
275. Whitman DH, Connaughton B. Model surgery prediction for mandibular midline distraction osteogenesis. Int J Oral Maxillofac Surg. 1999; 28(6):421-423.
276. Kofod T, Nørholt SE, Pedersen TK, Jensen J. Reliability of distraction vector transfer in unilateral vertical distraction of the mandibular ramus. J Craniofac Surg. 2005; 16(1):15-22.
277. Lübbers HT, Messmer P, Grätz KW, Ellis RE, Matthews F. Misjudgments at the mandibular angle: freehand versus computer-assisted screw positioning. J Craniofac Surg. 2010; 21(4):1012-1017.
278. Lübbers HT, Kruse A, Messmer P, Grätz KW, Obwegeser JA, Matthews F. Precise screw positioning at the mandibular angle: computer assisted versus template coded. J Craniofac Surg. 2011; 22(2):620-624.
279. Korb W, Engel D, Boesecke R, Eggers G, Kotrikova B, Marmulla R, Raczkowsky J, Wörn H, Mühling J, Hassfeld S. Development and first patient trial of a surgical robot for complex trajectory milling. Comput Aided Surg. 2003; 8(5):247-256.
280. Fortin T, Champleboux G, Bianchi S, Buatois H, Coudert JL. Precision of transfer of preoperative planning for oral implants based on cone-beam CT-scan images through a robotic drilling machine. Clin Oral Implants Res. 2002; 13(6):651-656.
281. Schermeier O, Lueth T, Glagau J, Szymanski D, Tita R, Hildebrand D, Klein M, Nelson K, Bier J. Automatic patient registration in computer assisted maxillofacial surgery. Stud Health Technol Inform. 2002; 85:461-467.
282. Klein M, Hein A, Lueth T, Bier J. Robot-assisted placement of craniofacial implants. Int J Oral Maxillofac Implants. 2003; 18(5):712-718.
283. O'Malley BW Jr, Weinstein GS, Snyder W, Hockstein NG. Transoral robotic surgery (TORS) for base of tongue neoplasms. Laryngoscope. 2006; 116(8):1465-1472.
284. Kane G, Eggers G, Boesecke R, Raczkowsky J, Wörn H, Marmulla R, Mühling J. System design of a hand-held mobile robot for craniotomy. Med Image Comput Comput Assist Interv. 2009; 12(Pt1):402-409.
285. Bast P, Popovic A, Wu T, Heger S, Engelhardt M, Lauer W, Radermacher K, Schmieder K. Robot-and computer-assisted craniotomy: resection planning, implant modelling and robot safety. Int J Med Robot. 2006; 2(2):168-178.
286. Eggers G, Wirtz C, Korb W, Engel D, Schorr O, Kotrikova B, Raczkowsky J, Wörn H, Mühling J, Hassfeld S, Marmulla R. Robot-assisted craniotomy. Minim Invasive Neurosurg. 2005; 48(3):154-158.
287. Chen CT, Adriane K. Endoscopic resection of a mandibular body and condylar osteoma. Minim Invasive Ther Allied Technol. 2008; 17(5):323-325.
288. Mommaerts MY. Endoscopically assisted sagittal split osteotomy for mandibular lengthening: technical note and initial experience. J Craniomaxillofac Surg. 2010; 38(2):108-112.
289. Strong EB. Endoscopic repair of anterior table frontal sinus fractures. Facial Plast Surg. 2009; 25(1):43-48.
290. Lauer G, Pradel W, Schneider M, Eckelt U. A new 3-dimensional plate for transoral endoscopicassisted osteosynthesis of condylar neck fractures. J Oral Maxillofac Surg. 2007; 65(5):964-971.
291. Schmelzeisen R, Cienfuegos-Monroy R, Schön R, Chen CT, Cunningham L Jr, Goldhahn S. Patient benefit from endoscopically assisted fixation of condylar neck fractures-a randomized controlled trial. J Oral Maxillofac Surg. 2009; 67(1):147-158.
292. Nahlieli O, Moshonov J, Zagury A, Michaeli E, Casap N. Endoscopic approach to dental implantology. J Oral Maxillofac Surg. 2011; 69(1):186-191.
293. Turner MD. Sialoendoscopy and salivary gland sparing surgery. Oral Maxillofac Surg Clin North Am. 2009; 21(3):323-329.
294. Olszewski R, Tran Duy K, Raucent B, Hebda A, Reychler H. Communicating a clinical problem to the engineers: towards a common methodology. Int J Oral Maxillofac Surg. 2008; 37(3):269-274.