Dimensional error of selective laser sintering, three-dimensional printing and PolyJet™ models in the reproduction of mandibular anatomy

Journal of Cranio-Maxillofacial Surgery

Volumn 37, Issue 3, 2009, Pages 167-173

  Ibrahim, Danilo ^a   Broilo, Tiago Leonardo ^a   Heitz, Claiton ^a   de Oliveira, Marília Gerhardt ^a   de Oliveira, Helena Willhelm ^a   Nobre, Stella Maris Wanderlei ^a   dos Santos Filho, José Henrique Gomes ^a   Silva, Daniela Nascimento ^a  

^a PONTIFICAL CATHOLIC UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

Author keywords

craniofacial abnormalities; Helical Computed Tomography; mandible; maxillofacial surgery; oral surgery; skeleton

Indexed keywords

ANALYTIC METHOD; ANALYTICAL ERROR; ANATOMY; ARTICLE; COMPARATIVE STUDY; COMPUTER PROGRAM; DIAGNOSTIC ACCURACY; ELECTRONICS; INTERMETHOD COMPARISON; MANDIBLE; MEASUREMENT; POLYJET MODEL; SELECTIVE LASER SINTERING; SPIRAL COMPUTER ASSISTED TOMOGRAPHY; THREE DIMENSIONAL PRINTING;

ANATOMY, CROSS-SECTIONAL; CEPHALOMETRY; COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; HUMANS; IMAGING, THREE-DIMENSIONAL; LASERS; MANDIBLE; MODELS, ANATOMIC; ORAL SURGICAL PROCEDURES; PATIENT CARE PLANNING; PROSTHESIS DESIGN; STATISTICS, NONPARAMETRIC; TOMOGRAPHY, SPIRAL COMPUTED;

EID: 61549113133     PISSN: 10105182     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jcms.2008.10.008     Document Type: Article

References (35)

1. ARTIS. Prototipagem rápida (2006). http://www.artis.com.br/prototipagem/proto002.html
2. Asaumi J., Kawai N., Honda Y., Shigehara H., Wakasa T., and Kishi K. Comparison of three-dimensional computed tomography with rapid prototype models in the management of coronoid hyperplasia. Dentomaxillofac Radiol 30 (2001) 330-335
3. Ashley S. Rapid prototyping systems. Mech Eng 113 (1991) 34-43
4. Barker T.M., Earwaker W.J.S., and Lisle D.A. Accuracy of stereolithographic models of human anatomy. Australas Radiol 38 (1994) 106-111
5. Berry E., Brown J.M., Connell M., Craven C.M., Efford N.D., Radjenovic A., and Smith M.A. Preliminary experience with medical applications of rapid prototyping by selective laser sintering. Med Eng Phys 19 (1997) 90-96
6. Bill J.S., Reuther J.F., Dittmann W., Kübler N., Meier J.L., Pistner H., and Wittenberg G. Stereolithography in oral and maxillofacial operation planning. Int J Oral Maxillofac Surg 24 (1995) 98-103
7. Bushong S.C. Radiologic science for technologists: physics, biology and protection. 6th edition (1997), Mosby, St. Louis
8. Centro Tecnológico da Indústria de Moldes, Ferramentas Especiais e Plásticos (CENTIMFE) (2006). www.centimfe.com/centimfe/pt
9. Chang P.S., Parker T.H., Patrick Jr. C.W., and Miller M.J. The accuracy of stereolithography in planning craniofacial bone replacement. J Craniofac Surg 14 (2003) 164-170
10. Chiarini L., Figurelli S., Pollastri G., Torcia E., Ferrari F., Albanese M., and Nocini P.F. Cranioplasty using acrylic material: a new technical procedure. J Craniomaxillofac Surg 32 (2004) 5-9
11. Choi J.Y., Choi J.H., Kim N.K., Kim Y., Lee J.K., Kim M.K., Lee J.H., and Kim M.J. Analysis of errors in medical rapid prototyping models. Int J Oral Maxillofac Surg 31 (2002) 23-32
12. D'Urso P.S., Atkinson R.L., Lanigan M.W., Earwaker W.J., Bruce I.J., Holmes A., Barker T.M., Effeney D.J., and Thompson R.G. Stereolithographic (SL) biomodelling in craniofacial surgery. Br J Plast Surg 51 (1998) 522-530
13. D'Urso P.S., Earwaker W.J., Barker T.M., Redmond M.J., Thompson R.G., Effeney D.J., and Tomlinson F.H. Custom cranioplasty using stereolithography and acrylic. Br J Plast Surg 53 (2000) 200-204
14. Faber J., Berto P.M., and Quaresma M. Rapid prototyping as a tool for diagnosis and treatment planning for maxillary canine impaction. Am J Orthod Dentofacial Orthop 129 (2006) 583-589
15. Hemmy D.C., and Tessier P.L. CT of dry skulls with craniofacial deformities: accuracy of the three-dimensional reconstruction. Radiology 157 (1985) 113-116
16. Mazzonetto R., Moreira R.W., Moraes M., Albergaria Barbosa J.R., Passeri L.A., and Spagnoli D.B. Uso de modelos estereolitográficos em cirurgia bucomaxilofacial. Rev Assoc Paul Cir Dent 56 (2002) 115-118
17. Melican M.C., Zimmerman M.C., Dhillon M.S., Ponnambalam A.R., Curodeau A., and Parsons J.R. Three-dimensional printing and porous metallic surfaces: a new orthopedic application. J Biomed Mater Res 55 (2001) 194-202
18. Meurer E. As tecnologias CAD-CAM em cirurgia e traumatologia bucomaxilofacial (2002), Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre [dissertation]
19. Meurer E., Oliveira M.G., Meurer M.I., Silva J.V., Bárbara A.S., and Heitz C. Biomodelos de prototipagem rápida em CTBMF. Rev Bras Cir Period 1 (2003) 172-180
20. Meurer M.I., Nobre L.F.S., Meurer E., Silva J.V.L., Barbara A.S., Oliveira M.G., Silva D.N., and Santos A.B. A critical review on acquisition and manipulation of CT images of the maxillofacial area for rapid prototyping. Second International Conference on Advanced Research in Virtual and Rapid Prototyping, 2005, Leiria, Portugal. Virtual Modelling and Rapid Manufacturing - Advanced Research in Virtual and Rapid Prototyping (2005), Taylor & Francis, A.A. Balkema Publishers, Leiden, The Netherlands
21. Motta V., and Wagner M. Bioestatística (2003), EDUCS/Robe, Caxias do Sul/São Paulo
22. Paeng J.Y., Lee J.H., Lee J.H., and Kim M.J. Condyle as the point of rotation for 3-D planning of distraction osteogenesis for hemifacial microsomia. J Craniomaxillofac Surg 35 (2007) 91-102
23. Parks E.T. Computed tomography applications for dentistry. Dent Clin North Am 44 (2000) 371-394
24. Poukens J.M., Haex J.K., Verdonck H., and Riediger D. Study on the accuracy of stereolithographic surgical guides in dental implantology. Phidias 8 (2002) 8-9
25. Romans L.E. Introduction to computed tomography (1995), Williams & Wilkins, Philadelphia
26. Rotaru H., Baciut M., Stan H., Bran S., Chezan H., Iosif A., Tomescu M., Kim S.G., Rotaru A., and Baciut G. Silicone rubber mould cast polyethylmethacrylate-hydroxyapatite plate used for repairing a large skull defect. J Craniomaxillofac Surg 34 (2006) 242-246
27. Sachs E. Dimensional control in 3D printing: a solid freeform fabrication process. In: Sachs E. (Ed). MIT materials processing center. Precision in shape, process control, structure and properties (1998). http://web.mit.edu/mpc/www/Events/Materials
28. Sachs E., Cima M., Bredt J., Curodeau A., and Fan T. CAD-casting: direct fabrication of ceramic shells and cores by three dimensional printing. Manuf Rev 5 (1992) 117-126
29. Sachs E., Cima M., Williams P., Brancazio D., and Cornie J. Three dimensional printing: rapid tooling and prototypes directly from a CAD model. J Eng Ind 114 (1992) 481-188
30. Santler G., Kärcher H., and Ruda C. Indications and limitations of three-dimensional models in cranio-maxillofacial surgery. J Craniomaxillofac Surg 26 (1998) 11-16
31. Sarment D.P., Sukovic P., and Clinthorne N. Accuracy of implant placement with a stereolithographic surgical guide. Int J Oral Maxillofac Implants 18 (2003) 571-577
32. Silva D.N., Gerhardt de Oliveira M., Meurer E., Meurer M.I., Lopes da Silva J.V., and Santa-Bárbara A. Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction. J Craniomaxillofac Surg 36 (2008) 443-449
33. Tang Y., Loh H.T., Fuh J.Y.H., Wong Y.S., Lu L., Ning Y., and Wang X. Accuracy analysis and improvement for direct laser sintering (2004). http://dspace.mit.edu/bitstream/1721.1/3898/2/IMST001.pdf
34. Waitzman A.A., Posnick J.C., Armstrong D.C., and Pron G.E. Craniofacial skeletal measurements based on computed tomography: part I. Accuracy and reproducibility. Cleft Palate Craniofac J 29 (1992) 112-117
35. Winder J., and Bibb R. Medical rapid prototyping technologies: state of the art and current limitations for applications in oral and maxillofacial surgery. J Oral Maxillofac Surg 63 (2005) 1006-1015