Residual stresses, surface roughness, and tool wear in hard turning: A comprehensive review

Materials and Manufacturing Processes

Volumn 27, Issue 6, 2012, Pages 583-598

  Saini, Sanjeev ^a   Ahuja, Inderpreet Singh ^b   Sharma, Vishal S ^c  

^a DAV INSTITUTE OF ENGINEERING AND TECHNOLOGY   (India)

^b PUNJABI UNIVERSITY   (India)

^c DR B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Hard turning; Residual stress; Surface integrity; Surface roughness; Tool wear

Indexed keywords

COMPREHENSIVE ANALYSIS; CUTTING PARAMETERS; HARD TURNING; HARD TURNING PROCESS; MANUFACTURING INDUSTRIES; SURFACE INTEGRITY; TOOL WEAR;

RESIDUAL STRESSES; STRESS CONCENTRATION; SURFACE ROUGHNESS; TURNING;

WEAR OF MATERIALS;

EID: 84861065638     PISSN: 10426914     EISSN: 15322475     Source Type: Journal    
DOI: 10.1080/10426914.2011.585505     Document Type: Review

References (100)

1. Huddle, D. New hard turning tools and techniques offer a cost-effective alternative to grinding. Tooling and Production Magazine 2001, 80, 96-103.
2. Konig, W.; Berktold, A.; Koch, K.F. Turning versus grinding: a comparison of surface integrity aspects and attainable accuracies. Ann. CIRP 1993, 42, 39-43. (Pubitemid 23679093)
3. Field, M.; Kahles, J. Review of surface integrity of machined components. Ann. CIRP 1971, 20 (2), 153-163.
4. Jang, D.Y.; Liou, J.H.; Watkins, J.R.; Kozaczek, K.J.; Hubbard, C.R. Characterization of surface integrity in machined austenitic stainless steel. Manufacturing Science and Engineering, MED 1995, 3 (1), 399-413.
5. Griffiths, B.J. Manufacturing Surface Technology, Surface Integrity and Functional Performance; Manufacturing Engineering Modular Series; Penton Press: New York, 2001.
6. Mittal, A.; Mehta, M. Surface finish prediction models for fine turning. International Journal of Production Research 1988, 26 (12), 1861-1876.
7. Basu, A.; Mohan, B.; Chandra, T. Development of a model to predict surface roughness during machining of high-strength low alloy (HSLA) steels. Transactions of Mechanical Engineering-IEAust. 1993, 18 (3), 183-188.
8. Miller, J.C.; Sutherland, J.W.; DeVor, R.E. Surface roughness characteristics for turning 380 and 390 aluminum casting alloys. NAMRC Proc. 1995, 282-288.
9. Grzesik, W. A revised model for predicting surface roughness in turning. Wear 1996, 194, 143-148. (Pubitemid 126378529)
10. Guo, Y.B.; Li, W.; Jawahir, I.S.; Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys: A state-of-the-art research review and analysis. Machining Science and Technology. 2009, 34, 437-470.
11. Jacobson,M. Surface integrity of hard-turnedM50 steel. Proc. Inst. Mech. Eng., Part B: J. Eng.Manuf. 2002, 216 (1), 47-54.
12. Brinksmeier, E.; Cammett, J.; Leskovar, P.; Peters, J.; Tonshoff, H.K. Residual stresses-Measurements and causes in machining processes. Ann. CIRP 1982, 31, 491-510. (Pubitemid 13564887)
13. Mittal, S.; Liu, C.R. A method of modelling residual stresses in super finish hard turning. Wear 1998, 218, 21-33. (Pubitemid 128717572)
14. Liu, C.R.; Mittal, S. Optimal pre-stressing the surface of a component by superfinish hard turning for maximum fatigue life in rolling contact. Wear 1998, 219, 128-140. (Pubitemid 29122861)
15. Matsumoto, Y.; Hashimoto, F.; Lahoti, G. Surface integrity generated by precision hard turning. Ann. CIRP 1999, 48, 59-62.
16. Thiele, J.D.; Melkote, S.N.; Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel. J. Mater. Process. Technol. 1999, 94, 216-226. (Pubitemid 32080211)
17. Arunachalam, M.; Mannan, M.A.; Spowage, A.C. Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools. International Journal of Machine Tools and Manufacture 2004, 44, 1481-1491.
18. Arunachalam, R.M.; Mannan, M.A.; Spowage, A.C. Residual stress and Surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools. International Journal of Machine Tools and Manufacture 2004, 44, 879-887.
19. Sharman,A.R.C.;Hughes, J.I.;Ridgway,K.An analysis of the residual stresses generated in Inconel 718 when turning. Journal of Materials Processing Technology 2006, 173, 359-367.
20. Axinte, D.A.; Andrews, P.; Li, W.; Gindy, N.; Withers, P.J. Turning of advanced Ni based alloys obtained via powder metallurgy route. Annals of the CIRP 2006, 55 (1), 117-120. (Pubitemid 44578375)
21. Chevrier, P.; Tidu, A.; Bolle, B.; Ccezard, P.; Tinnes, J.P. Investigation of surface integrity in high speed end milling of a low alloyed steel. International Journal of Machine Tools and Manufacture 2003, 43, 1135-1142.
22. Ulutan, D.; Alaca, B.E.; Lazoglu, I. Analytical modeling of Residual stresses in machining. Journal of Materials Processing Technology 2007, 183, 77-87. (Pubitemid 46195171)
23. Ö zel, T.; Zeren, E. Finite element modeling the influence of edge roundness on the stress and temperature fields induced by high-speed machining. International Journal of Advanced Manufacturing Technology 2007, 35, 255-267.
24. Hua, J.; Shivpuri, R.; Cheng, X.; Bedekar, V.; Matsumoto, Y.; Hashimoto, F.;. Watkins, T.R. Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry. Materials Science and Engineering 2005, 394, 238-248. (Pubitemid 40595014)
25. Hua, D.; Umbrello, R.; Shivpuri, R. Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface Residual stress in the hard turning of bearing steel. Journal of Materials Processing Technology 2006, 171, 180-187. (Pubitemid 43052667)
26. Mantle, A.L.; Aspinwall, D.K. Surface integrity of a high speed milled gamma titanium aluminide. Journal of Materials Processing Technology 2001, 118, 143-150. (Pubitemid 33147977)
27. Griffiths, B.J. White layer formations at machined surface and their relationship to white layer formations at worn surfaces. J. Tribol. 1985, 107, 165-171. (Pubitemid 15488557)
28. Grifiths, B.J. Mechanisms of white layer generation with reference to machining and deformation processes. J. Tribol. 1987, 109, 525-530.
29. Bothroyd, G.; Knight, W.A. Fundamentals of Machining and Machine Tools. Marcel Dekker: New York, 1989.
30. Kopac, J.; Bahor, M.; Sokovic, M. Optimal machining parameters for achieving the desired surface roughness in fine turning of cold pre-formed steel workpieces. International Journal of Machine Tools and Manufacture 2002, 42, 707-716. (Pubitemid 34295687)
31. Chou, Y.K.; Song, H. Tool nose radius effects on finish hard turning. Journal of Materials Processing Technology 2004, 148, 259-268.
32. Noordin, M.Y.; Venkatesh, V.C.; Sharif, S.; Elting, S.; Abdullah, A. Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology 2004, 145, 46-58.
33. Grzesik, W.; Wanat, T. Surface finish generated in hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts. International Journal of Machine Tools and Manufacture 2006, 46, 1988-1995. (Pubitemid 44442817)
34. Thamizhmanii, S.; Saparudin, S.; Hasan, S. Analyses of surface roughness by turning process using Taguchi method. Journal of Achievements In Materials And Manufacturing Engineering 2006, 20 (1), 503-506.
35. Singh, D.; Rao, P.V. A surface roughness prediction model for hard turning process. Int. J. Adv Manuf. Technology 2007, 32, 1115-1124. (Pubitemid 46645790)
36. Lalwani, D.L.; Mehta, N.K.; Jain, P.K. Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN 250 steel. Journal ofMaterials Processing Technology 2008, 206, 167-179.
37. Davima, P.J.; Gaitondeb, V.N.; Karnikc, S.R. Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN Models. Journal of Materials Processing Technology 2008, 205, 16-23.
38. Jayant, A.; Kumar, V. Prediction of surface roughness in CNC turning operation using Taguchi design of experiments. Journal of the Institution of Engineers (India) 2008, 88, 19-25.
39. Sharma, V.S.; Dhiman, S.; Sehgal, R.; Sharma, S.K. Estimation of cutting forces and surface roughness for hard turning using neural networks. J. Intell. Manuf. 2008, 473-483.
40. Cakir, M.C.; Ensarioglu, C.; Demirayak, I. Mathematical modeling of surface roughness for evaluating the effects of cutting parameters and coating material. Journal of Materials Processing Technology 2009, 209, 102-109.
41. Ramesh, S.; Karunamoorthy, L.; Palanikumar, K. Surface roughness analysis in machining of titanium alloy. Materials and Manufacturing Processes 2008, 23 (2), 174-181.
42. Kahraman, F. The use of response surface methodology for prediction and analysis of surface roughness of AISI 4140 steel. MTAEC, 2009, 43 (5), 267-270.
43. Prasad, M.V.R.D.; Janardhana, G.R.; Rao, D.H. Experimental investigation to study the influence of process parameters in dry machining. Journal of Engineering and Applied Sciences 2009, 4 (3), 91-94.
44. Suhail, H.; Ismail, N.; Wong, S.V.; Abdul Jalil, N.A. Optimization of cutting parameters based on surface roughness and assistance of workpiece surface temperature in turning process. American J. Engineering and Applied Sciences 2010, 3 (1), 102-108.
45. Chavoshi, S.Z.; Tajdari, M. Surface roughness modelling in hard turning operation of AISI 4140 using CBN cutting tool. Int. J. Mater. form 2010, (3), 233-239.
46. M'Saoubia, R.; Outeirob, J.C.; Changeuxa, B.; Lebruna, J.L.; Moraao Diasb, A. Residual stress analysis in orthogonal machining ofstandard and resulfurized AISI 316L steels. Journal of Materials Processing Technology 1999, 96, 225-233.
47. El-Axir, M.H. A method of modeling residual stress distribution in turning for different materials. International Journal of Machine Tools and Manufacture 2002, 42, 1055-1063. (Pubitemid 34771996)
48. Rech, J.; Moisan, A. Surface integrity in finish hard turning of case-hardened steels. International Journal of Machine Tools and Manufacture 2003, 43, 543-550.
49. Dahlman, P.; Gunnberg, F.; Jacobson, M. The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning. Journal of Materials Processing Technology 2004, 147, 181-184.
50. Liu, M.; Takagi, J.; Tsukuda, A. Effect of tool nose radius and tool wear on residual stress distribution in hard turning of bearing steel. Journal of Materials Processing Technology 2004, 150, 234-241.
51. Capello, E. Residual stresses in turning Part I: Influence of process parameters. Journal of Materials Processing Technology 2005, 160, 221-228. (Pubitemid 40245647)
52. Hua, J.; Umbrello, D.; Shivpuri, R. Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface Residual stress in the hard turning of bearing steel. Journal of Materials Processing Technology 2006, 171, 180-187. (Pubitemid 43052667)
53. Umbrello, D.; Ambrogioa, G.; Filice, L.; Shivpuri, R. An ANN approach for predicting subsurface residual stresses and the desired cutting conditions during hard turning. Journal of Materials Processing Technology 2007, 189, 143-152. (Pubitemid 46529192)
54. Batalha, G.F.; Delijaicov, S.; Aguiar, J.B.; Bordinassi, E.C.; Stipkovic Filho, M. Residual stresses modeling in hard turning and its correlation with the cutting forces. Journal of Achievements in Materials and Manufacturing Engineering 2007, 24 (1), 350-356.
55. Ulutan, D.; Erdem, A.B.; Lazoglu, I. Analytical modelling of residual stresses in machining. Journal of Materials Processing Technology 2007, 183, 77-87. (Pubitemid 46195171)
56. Outeiro, J.C.; Pina, J.C.; M'Saoubi, R.; Pusavec, F.; Jawahir, I.S. Analysis of residual stresses induced by dry turning of difficult-to-machine materials. CIRP Annals-Manufacturing Technology 2008, 57, 77-80.
57. Zhang, X.; Gao, E.; Liub, R.C. Optimization of process parameter of residual stresses for hard turned surfaces. Journal of Materials Processing Technology 2009, 209, 4286-4291.
58. Jaharah, A.G.; Wahid, S.W.; Hassan, C.H.; Nuawi M.Z.; Mohd, N.; Rahman, A. The effect of uncoated carbide tool geometries in turning AISI 1045 using finite element analysis. European Journal of Scientific Research 2009, 28 (2), 271-277.
59. Rizzuti S.; Umbrello, D.; Filice, L.; Settineri, L. Finite element analysis of residual stresses in machinings. Int. J. Mater. Form 2010, 3 (1), 431-434.
60. Caruso, S.; Outeiro, J.C.; Umbrello, D.; Saoubi, R. Modeling and experimental validation of the surface residual stresses induced by hard machining of AISI H13 tool steel. Int. J. Mater. Form 2010, 3 (1), 515-518.
61. Mittal, S.; Lid, C.R. A method of modeling residual stresses in superfinish hard turning. Wear 1998, 218, 21-33. (Pubitemid 128717572)
62. Noyan, I.C.; Cohen, J.B. The nature of residual stress and its measurement. Sagamore Army Material Research Conference Proceedings 1981, 28 (1).
63. Liu, C.R.; Barash, C.M. Variable governing patterns of mechanical residual stress in a machined surface. ASME J. Eng. Ind. 1982, 104, 257-264.
64. Thiele, J.D.; Melkote, S.N.; Peascoe, R.A.; Watkins, T.R. Effect of cutting-edge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 steel. J. Manufacturing Science and Engineering 2000, 122 (4), 642-649.
65. Huafuh, K.; Chih-Fu, W. A residual-stress model for the milling of aluminum alloy (2014-T6). J. Material Processing Technology 1995, 51 (1-4), 87-105.
66. El-Axir, M.H.; Bailey, J.A.; El-Khabeery, M.M. Effects of selected cutting parameters on fatigue life, maximum residual stress, and surface roughness: Part-I Unlubricated conditions. In Second Assiut University Int. Conf. Mech. Eng. Advanced Tech. for Industrial Production, Egypt, March 2-4, 1999; 306-318.
67. El-Axir, M.H.; Bailey, J.A.; El-Khabeery, M.M. Effects of selected cutting parameters on fatigue life, maximum residual stress, and surface roughness: Part-II Lubricated conditions. In Second Assiut University Int. Conf. Mech. Eng. Advanced Tech. for Industrial Production, March 2-4, 1999; 319-327.
68. Lin, Z.C.; Lin, Y.Y.; Liu, C.R. Effect of thermal load and mechanical load on the residual stress of a machined workpiece. Int. J. Mech. Sci. 1991, 33 (4), 263-278. (Pubitemid 21681296)
69. Elkhabeery, M.M.; Fattoh, M. Residual stress distribution caused by milling. Int. J. Mach. Tools Manufact. 1989, 29 (3), 391.
70. Endres, W.J.; Kountanya, R.K. The effects of corner radius and edge radius on tool flank wear. Journal of Manufacturing Processes 2002, 4 (2), 89-96. (Pubitemid 37112861)
71. Yen, Y.-C.; Jain, A.; Altan, T. A finite element analysis of orthogonal machining using different tool edge geometries. Journal of Materials Processing Technology 2004, 146, 72-81.
72. Bosheh, S.S.; Mativenga, P.T. White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling. International Journal of Machine Tools and Manufacture 2006, 46, 225-233. (Pubitemid 41563986)
73. Sharma, V.S.; Sharma, S.K.; Sharma, A.K. Cutting tool wear estimation for turning. J. Intell. Manuf. 2008, 19 (1), 99-108. (Pubitemid 351270146)
74. Singh, H. Optimizing tool life of carbide inserts for turned parts using Taguchi's design of experiments approach. In Proceedings of the International Multi-Conference of Engineers and Computer Scientists, Vol. II, Hong Kong, March 21, 2009.
75. Thamizhmanii, S; Hasan, S. Investigating flank wear and cutting force on hard steels by CBN cutting tool by turning. In Proceedings of the World Congress on Engineering, Vol. III, London, UK, July 2-4, 2008.
76. Quiza, R.; Figueira, L.; Davim, J.P. Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel. Int. J. Adv. Manufacturing Technology 2008, 37, 641-648. (Pubitemid 351601452)
77. Sahin, Y. Comparison of tool life between ceramic and cubic boron nitride (CBN) cutting tools when machining hardened steels. Journal of Materials Processing Technology 2009, 209, 3478-3489.
78. Attanasio, A.; Ceretti, E.; Fiorentino, A.; Cappellinia, C.; Giardinib, C. Investigation and FEM-based simulation of tool wear in turning operations with uncoated carbide tools. Wear 2010, 269, 344-350.
79. Arunachalam, R.M.; Mannan, M.A.; Spowage, A.C. Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools. International Journal of Machine Tools and Manufacture 2004, 44, 879-887.
80. Gunnberg, F.; Escursell, M.; Jacobson, M. The influence of cutting parameters on Residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel. Journal of Materials Processing Technology 2006, 174, 82-90.
81. Huang, Y.; Liang, S.Y. Modelling of CBN tool crater wear in finish hard turning. Int. J. Adv. Manuf. Technol. 2004, 24, 632-639.
82. Ö zel, Y.; Karpat, Y.; Figueira, L.; Davimb, P.J. Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts. Journal of Materials Processing Technology 2007, 189, 192-198. (Pubitemid 46529196)
83. Tamizharasan, T.; Selvaraj, T.; Noorul, H.A. Analysis of tool wear and surface finish in hard turning. Int. J. Adv. Manuf. Technol. 2006, 28, 671-679.
84. Ö zel, T.; Karpat, Y. Predictive modeling of Surface roughness and tool wear in hard turning using regression and neural networks. International Journal of Machine Tools and Manufacture 2005, 45, 467-479. (Pubitemid 40142539)
85. Thamizhmanii, S.; Kamarudin, K.; Rahim, E.A.; Saparudin, H.A.S. Optimizing surface roughness and flank wear on hard turning process using Taguchi parameter design. In Proceedings of the World Congress on Engineering, Vol. II, London, UK, 2007.
86. Grzesik, W. Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools. Wear 2008, 265, 327-335.
87. Noordin, M.Y.; Affandi, M.Z.; Hendriko, D.K. Hard turning of cold work tool steel using wiper ceramic tool. Journal Mekanikal 2008, 25, 92-105.
88. Kamely, M.A.; Noordin, M.Y.; Ourdjini, A.; Venkatesh, V.C.; Razali, M.M. Alternative low cost cutting tools for hard turning of AISI D2. Journal of Advanced Manufacturing Technology 2008, 2 (2), 29-37.
89. Gusri, A.I.; Che, H.; Jaharah, C.H.; Yanuar, A.G.; Yasir, B.; Nagi, A. Application of Taguchi method in optimizingturning parameters of titanium alloy. Seminar on Engineering Mathematics, 2008.
90. Aneiro, F.M.; Coelho, R.T.; Brandão, L.C. Turning hardened steel using coated carbide at high cutting speeds. J. the Braz. Soc. of Mech. Sci. and Eng. 2008, 30(2), 104-109.
91. Noordin, M.Y.; Affandi, M.Z.; Hendriko, D.K. Hard turning of cold work tool steel using wiper ceramic tool. Journal Mekanikal 2008, 25, 92-105.
92. Yallesea, M.A.; Kamel, C.; Nassereddine, Z.; Lakhdar, B.; Rigalc, J.-F. Hard machining of hardened bearing steel using cubic boron nitride tool. Journal of Materials Processing Technology 2009, 209, 1092-1104.
93. Gaitonde, V.N.; Karnik, S.R.; Luis, F.; Davim, J.P. Analysis of machinability during hard turning of cold work tool steel (Type: AISI D2). Materials and Manufacturing Processes 2009, 24 (12), 1373-1382.
94. Dawson, T.G.; Kurfess, T.R. Tool life, wear rates, and surface quality in hard turning. Transactions of the North American Research Institute 2001, 29, 175-182.
95. Pavel, R.; Sinram, K.; Combs, D.; Deis, M.; Marinescu, I. Surface quality and tool wear in interrupted hard turning of 1137 steel shafts. In Proceedings of International Conference on Precision Engineering 2003-2004, Singapore, March 2004.
96. Chen, L.; El-Wardany, T.; Nasr, M.; Elbestawi, M.A. Effects of edge preparation and feed when hard turning a hot work die steel with polycrystalline Cubic Boron Nitride tools. Annals of the CIRP 2006, 55 (1), 88-92.
97. Uhlmann, Reimers, E.W.; Byrne, F.; Klaus, M. Analysis of tool wear and residual stress of CVD diamond coated cemented carbide tools in the machining of aluminium silicon alloys. Prod. Eng. Res. Devel. 2010, 4, 203-209.
98. Chou, Y.K.; Evans, C.J. Tool wear mechanism in continuous cutting of hardened tool steels. Wear 1997, 212, 59-65. (Pubitemid 127408314)
99. Chou, Y.K. Hard turning of M50 steel with different microstructures in continuous and intermittent cutting. Wear 2003, 255, 1388-1394. (Pubitemid 36990859)
100. ISO. Tool Life Testing with Single-Point Turning Tools. ISO Standard 3685:1993(E), 1993.