Comparison of tool life between ceramic and cubic boron nitride (CBN) cutting tools when machining hardened steels

Journal of Materials Processing Technology

Volumn 209, Issue 7, 2009, Pages 3478-3489

  Sahin, Y ^a  

^a GAZI UNIVERSITY   (Turkey)

Author keywords

Cutting tool; Hardness; Optimal parameter; Orthogonal design; Tool life; Turning

Indexed keywords

ANALYSIS OF VARIANCE (ANOVA); BORON; BORON NITRIDE; CERAMIC CUTTING TOOLS; CERAMIC MATERIALS; CUBIC BORON NITRIDE; HARDENING; HARDNESS; METAL WORKING TOOLS; OPTIMIZATION; REGRESSION ANALYSIS; SIGNAL TO NOISE RATIO; TAGUCHI METHODS; TURNING;

BEARING STEELS; CBN CUTTING TOOLS; CONFIDENCE LEVELS; CUBIC BORON NITRIDES (C-BN); CUTTING PARAMETERS; CUTTING SPEED; CUTTING TIME; DOMINANT FACTORS; EXPONENTIAL MODELS; FEED RATES; FIRST ORDERS; FIRST-ORDER MODELS; HARDENED STEELS; INDEPENDENT VARIABLES; OPTIMAL CUTTING PARAMETERS; OPTIMAL PARAMETER; OPTIMAL TESTING; ORTHOGONAL DESIGN; PREDICTION CAPABILITIES; S/N RATIOS; SECOND-ORDER REGRESSION MODELS; SIGNAL-TO-NOISE RATIOS; TOOL LIFE;

CUTTING TOOLS;

EID: 62949100279     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2008.08.016     Document Type: Article

References (50)

1. Al-Ahmari A.M.A. Predictive machinability models for a selected hard material in turning operations. J. Mater. Process. Technol. 190 (2007) 305-311
2. Arsecularatne J.A., Zhang L.C., and Montross C. Wear and tool life of tungsten carbide. PCBN and PCD cutting tools. Int. J. Mach. Tools Manuf. 46 (2006) 482-491
3. Avila R.F., and Abrao A. The effect of cutting fluids on the machining of hardened AISI 4340 steel. J. Mater. Process. Technol. 119 (2001) 21-26
4. Barry J., and Byrne G. Cutting tool wear in the machining of hardened steels. Part I. Cubic boron nitride cutting tool wear. Wear 247 (2001) 139-151
5. Benga G.C., and Abrao A.M. Turning of hardened 100Cr6 bearing steel with ceramic and PCBN tools. J. Mater. Process. Technol. 143/144 (2003) 237-241
6. Che Haron C.H., Ginting A., and Goh J.H. Wear of coated and uncoated carbides in turning tool steel. J. Mater. Process. Technol. 116 (2001) 49-54
7. Cheng T.-C., and Hong H. Comparison of the tool life of tungsten carbide coated by multi-layer TiCN and TiAlCN for end mills using the Taguchi method. J. Mater. Process. Technol. 123 (2003) 1-4
8. Chou Y.K., Evans C.J., and Barash M.M. Experimental investigation on CBN turning of hardened AISI 52100 steel. J. Mater. Process. Technol. 124 (2002) 274-283
9. Chou Y.K., and Song H. Tool nose radius effects on finish hard turning. J. Mater. Process. Technol. 148 (2004) 259-268
10. Choudry S.K., and Bartarya G. Role of temperature and surface finish in predicting tool wear using neural network and design of experiments. Int. J. Mach. Tools Manuf. 43 (2003) 747-753
11. Davim J.P., and Figueira L. Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques. J. Mater. Des. 28 (2006) 1186-1191
12. Davim J.P. A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments. J. Mater. Process. Technol. 116 (2001) 305-308
13. Davim, J.P., Gaitonde, V.N., Karnik, S.R., in press. Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models. J. Mater. Process. Technol.
14. Diniz A.E., and Oliveria A.J. Hard turning of interrupted surfaces using CBN tools. J. Mater. Process. Technol. 195 (2008) 275-281
15. Feng X., and Wang X. Development of empirical models for surface roughness prediction in finish turning. Int. J. Adv. Manuf. Technol. 20 (2002) 348-356
16. Grzesik W., and Wanat T. Surface finish generated in hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts. J. Mach. Tools Manuf. 46 (2006) 1988-1995
17. Hua J., Shivpuri H., Cheng X., Bedehar V., Matsumoto Y., Hashimoto Y., and Watkins T.R. The effect of feed rate, workpiece hardness and cutting edge on the residual stress. Mater. Sci. Eng. A 394 (2005) 238-248
18. Huang Y., and Dawson T.G. Tool crater wear depth of modelling in CBN hard turning. Wear 258 (2005) 1455-1461
19. Jang D.Y., and Hsiao Y.T. Use of ceramic tools in hard turning of hardened AISI M2 steel. Tribol. Trans. 43 (2000) 641-646
20. Jindal P.C., Santhanam A.T., Schleinkofer U., and Shuster A.F. Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning. Int. J. Recfrac. Met. Hard Mater. 17 (1999) 163-170
21. Kishawy H.A., and Elbestawri M.A. Tool wear and surface integrity during high speed turning of hardened steel with cubic boron nitride tool. J. Eng. Manuf. 215 (2001) 755-767
22. Ko{horn}pac J., Bahor M., and Sokovic M. Optimal machining parameters for achieving the desired surface roughness in fine turning cold pre-formed steel work processing. Int. J. Mach. Tools Manuf. 42 (2002) 707-716
23. Khrais S.K., and Lin Y.J. Wear performance and tool performance of TiAl PVD coated inserts during machining of AISI 4140 steel. Wear 262 (2006) 64-69
24. Kumar A.S., Durai A.R., and Sornakumar T. Machinability of hardened steel using alumina based ceramic cutting tools. Int. J. Refrac. Met. Hard Mater. 21 (2003) 109-117
25. Kumar A.S., Durai A.R., and Sornakumar T. Wear behavior of alumina based ceramic cutting tools on machining stainless steel and EN24 steel. Tribol. Int. 39 (2006) 191-197
26. Lim C.Y.H., Lau S., and Lim C. Work materials and effectiveness of coated tool. Surf. Coat. Technol. 146/147 (2001) 298-304
27. Lima J.G., Avila R.F., Abrao A.M., Faustin M., and Davim J.P. Hard turning: AISI 4340 high strength alloy steel and AISI D2 cold work tool steel. J. Mater. Process. Technol. 169 (2005) 388-395
28. Luo S.Y., Liao Y.S., and Tsai Y.Y. Wear behaviour of CBN cutting tools when turning AISI 4340 hardened alloy steel. J. Mater. Process. Technol. 88 (1999) 114-121
29. Montogomery D.C. Design and Analysis of Experiments. 4th ed. (2001), Wiley, New York
30. M'Saoubi R., and Chandrasekaran H. Investigation of the effects of tool micro-geometry and coating on tool temperature during orthogonal turning of quenched and tempered steel. J. Mach. Tools Manuf. 44 (2004) 213-224
31. Ozel T., and Karpat Y. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. Int. J. Mach. Tools Manuf. 45 (2005) 467-479
32. Ozel T., and Nadgir A. Prediction of flank wear by using back propagation neural network modelling when cutting hardened H-13 steel with chamfered and honed CBN tools. Int. J. Mach. Tools Manuf. 42 (2002) 287-297
33. Pawade R.S., Joshi S.S., and Brahmankar B.K. Effect of machining parameters and cutting edge geometry on surface integrity of high speed turned Inconel 718. J. Mach. Tools Manuf. 48 (2008) 15-28
34. Poulachon G., Moisan A., and Jawahir I.S. Tool wear mechanisms in hard turning with PCBN tools. Wear 250 (2001) 576-586
35. Poulachon G., Bandyopadhyay B.P., Jawahir I.S., Pheulpin S., and Seguin E. Wear behavior of CBN tools while turning various hardened steels. Wear 256 (2004) 302-312
36. Poulachon G., Albert A., Schluraff M., and Jawahir I.S. An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning. Int. J. Mach. Tools Manuf. 45 (2005) 211-218
37. Risbood K.A., Dixit U.S., and Sahasrabudhe A.D. Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process. J. Mater. Process. Technol. 132 (2003) 203-214
38. Sahin Y. Metal Cutting Prenciples vol. 2 (2001), Nobel Publication & Distribution, Ankara, Turkey (Turkish)
39. Sahin, Y., 2006. Machinability of AISI 1050, 4140 and E52100 steel's by different cutting tools and development of statistical models. Research Report of Gazi University, TEF 07/2003-38 Number Coded Project, Ankara, Turkey.
40. Sahin Y., and Motorcu A.R. Prediction of surface roughness in the machining the carbon steels by cutting tools. In: Ghosh S., Lee J.K., and Castro J.C. (Eds). AIP Conf.Proc.712, Proceedings of 8th International Conference on Numerical Methods in Industrial Forming Applications. Ohio State University, OH, USA (2004) 1414-1422
41. Sahin Y., and Motorcu A.R. Surface roughness model in machining hardened steel with cubic boron nitride cutting tools. Int. J. Refrac. Met. Hard Mater. 26 (2008) 84-90
42. Sahin Y., and Motorcu A.R. The tool life models for ceramic cutting tools in terms of the Taguchi method when turning hardened steels. In: Akkok M., Erdem A., Engin Ki{dotless}li{dotless}c S., Konuksever E.I., and Tonuk E. (Eds). Proceedings of 13th Int. Conf.on Mach. Des. &Prod. UMTIK2008. Middle East Technical University (METU), Istanbul/Turkey (2008) 613-627
43. Sahin Y., and Motorcu A.R. A model for surface roughness in turning AISI 4140 steel using coated carbide cutting tools. In: Akkok M., Erdem A., Engin Ki{dotless}li{dotless}c S., Konuksever E.I., and Tonuk E. (Eds). Proceedings of 11th International Conference on Mach. Des. & Prod. UMTIK2004. Middle East Technical University (METU), Antalya/Turkey (2004) 269-284
44. Sahin Y., and Sur G. The effects of various multilayer ceramic coatings on the wear of carbide cutting tools when machining metal matrix composites. Surf. Coat. Technol. 199 (2005) 112-117
45. Sick B. On-line and indirect tool wear monitoring in turning with artificial neural networks: a review of more than a decade of research. Mech. Syst. Sig. Process. 16 (2002) 487-546
46. Scheffer C., Kratz H., Heyns P., and Klocke F. Development of a tool wear monitoring system for hard turning. Int. J. Mach. Tools Manuf. 43 (2003) 973-985
47. Thiele J.D., Melkote S.N., Reascoe R.A., and Watkins T.R. Effects of cutting edge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 steel. ASME J. Manuf. Sci. Eng. 122 (2000) 467-479
48. 3/Ti(C,N) composite ceramic tool materials. J. Mat. Eng. Perf. 10 1 (2001) 102-107
49. Yang W.H., and Tarng Y.S. Design optimization of cutting parameters for turning operations based on the Taguchi method. J. Mater. Process. Technol. 84 (1998) 123-129
50. Yen Y.C., Jain A., and Altan T. A finite-element analysis of orthogonal machining using different tool edge geometries. J. Mater. Process. Technol. 146 (2004) 72-81