Analysis of tool wear and surface finish in hard turning

International Journal of Advanced Manufacturing Technology

Volumn 28, Issue 7-8, 2006, Pages 671-679

  Tamizharasan, T ^a   Selvaraj, T ^a   Haq, A Noorul ^a  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

DOE; Hard turning; Material removal rate; Signal to noise ratio; Tool life; Validation

Indexed keywords

ECONOMICS; GRINDING WHEELS; LATHES; NITRIDES; POLYCRYSTALLINE MATERIALS; SIGNAL TO NOISE RATIO; SURFACE ROUGHNESS; TURNING;

DOE; HARD TURNING; MATERIAL REMOVAL RATE; TOOL LIFE; VALIDATION;

WEAR OF MATERIALS;

EID: 33645566059     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-004-2411-1     Document Type: Article

References (38)

1. Pavel R et al (2001) Surface quality and tool wear in interrupted hard turning of 1137 steel shafts. Dana company, MIME Department, Advanced Technoplogy Resource Group. Technical Resource Park, Ottawa Lake, MI 49267, pp 1-6
2. Chou YK et al (2002) Experimental investigation on CBN turning of hardened AISI 52100 steel. J Mater Process Technol 124:274-283
3. Konig W et al (1993) Turning versus grinding - A comparison of surface integrity aspects and attainable accuracies. Ann CIRP 42:39-13
4. Abrao AM, Aspinwall DK (1996) The surface integrity of turned and ground hardened bearing steel. Wear 196:279-284
5. Saroka DP (2000) Hard turning and machine tools. Brochure of Elmira. New York
6. Griffiths BJ (1987) Mechanism of white layer generation with reference to machining processes and deformation processes. ASME J Tribology 42:145-152
7. Dawson TG. Kurfees TR (2000) An investigation of tool wear and surface quality in hard turning. In: Transactions of 28th annual North American Manufacturing Research Institution of SME, University of Kentucky, Lexington. May 24-26, pp 215-220
8. Tonshoff HK, Wobker HG, Brandt D (1995) Hard turning influence on the workpiece properties. Trans NAMRI/SME 23:215-220
9. Zhao H, Barber GC, Zou Q (2002) A study of flank wear in orthogonal cutting with internal cooling. Wear 253:957-962
10. Feng C-X (2001) An experimental study of the impact of turning parameters on surface roughness. In: Proceedings of the International Conference on Industrial Engineering Research, Bradley university, USA, Institute of Industrial Engineers, Norcross, GA. March 27-28, pp 1-11
11. Chou Y, Evans CJ (1996) Microstructural effects in precision hard turning. ASME J Manuf 4:237-242
12. Takastu S, Shtmoda H, Otani K (1983) Effects of CBN content on the performance of PCBN tools. Int J Refractory Hard Mater 12:175-178
13. Konig W, Komanduri R, Tonstoff HK, Ackershott G (1984) Machining of hard materials. Ann CIRP 33(2 ):417-427
14. Negishi H, Aoki A, Sata T (1980) Study of tool failure of carbide tools in interrupted cutting. Ann CIRP 29:57-60
15. Dewes RC, Aspinwall DK (1996) The use of high speed machining for the manufacture of hardened steel dies. Trans NAMRI/SME 24:21-26
16. Chou YK, Chris J, Evans (1999) Cubic boron nitride tool wear in interrupted hard turning. Wear 225:234-245
17. Bhattacharyya A (2000) Metal cutting - theory and practice. New Central Book Agencies Private Limited, Calcutta, India
18. Huddle D (2001) New hard turning tools and techniques offer a cost effective alternative to grinding. Tooling Prod Magazine 80:96-103. Advanced Materials Carbohy, Inc., 6001 cochran head, Suite 104 Solon, Nelson Publishers, July 1997
19. Huang Y, Eiang SY, George W (2003) Cutting forces modeling considering the effects of tool thermal properties applicable to CBN hard turning. Int J Mach Tool Manuf 3:1-15
20. Moylan SP, Kornpella S, Chandrasekar S, Farns TN (2003) A new approach for studying mechanical properties of thin surface layers affected by manufacturing processes. ASME J Manuf Sci Eng 125:310-315
21. Brinksmeier E, Brockhiff T (1999) White layers in machining steels. In: Proceedings of Second International Conference on high Speed machining. Recherche publications, Darmstadt, Germany, March 10-11, pp 7-13
22. Konig W, Klinger M, Link R (1990) Machining hard materials with geometrically defined cutting edges. Ann CIRP 39(1):61-64
23. Bendell T (1998) Taguchi methods, In: Proceedings of the 1998 European conference on Taguchi Method, Elsevier, Amsterdam
24. Ghani JA, Chaudhoury IA, Hassan HH (2004) Application of Taguchi method in the optimization of end milling parameters. J Mater Process Technol 145:84-92
25. Tekiner Z (2004) An experimental study on the examination of spring-back of sheet metals with several thicknesses and properties in bending dies. J Mater Process Technol 145:109-117
26. Liu CR, Mittal S (1998) Optimal prestressed surface of a component by super finish hard turning for maximum fatigue life in rolling contact. Wear 219:128-140
27. Kopac J, Bahor M, Sokovic M (2002) Optimal machining parameters for achieving the desired surface roughness in fine turning of cold preformed steel work pieces. Int J Mach Tools Manuf 42: 707-796
28. Tonshoff HK, Wobker HG, Brandt D (1996) Tool wear and surface integrity in hard turning. Prod Eng 3(1): 19-24
29. Auschner W (1997) Stone super finishing of hard turned surfaces. Machining Technol Association SME 8(3): 1-05
30. Thiele JD, Melkote SN (1999) Effects of edge geometry and workpiece hardness on surface generation in finish machining of AISI 52100 steel. J Mater Process Technol 94:216-226
31. Matsumoto Y, Narutaki N (1996) Tool-workpiece interaction in precision hard turning. Riner Points 8(4): 14-16
32. Thiele JD (1998) An investigation of surface generation mechanisms for finish hard turning of AIS152100 steel. Master's Thesis, Georgia Institute of Technology
33. Matsumoto Y, Barash MM (1987) Review on cutting technology of hard materials. In: Proceedings of Sixth International Conference on Production Engineering, Japan, pp 116-122
34. Ekstedt T (1987) Challenge of hard turning. Carbide Tool J 19:21-24
35. Bossom PK (1990) Finish machining of hard ferrous workpieces. Ind Diamond Rev 50(540):228-232
36. Barry J, Byrne G (2001) Cutting tool wear in the machining of hardened steels', part II. Wear 247:139-151
37. Chen JC, Huang LH, Ean AX, Eee S (1999) Analysis of an effective sensing location for an in-process surface recognition system in turning operations. J Ind Technol 15(3): 1-6
38. Davies MA. Chou YK, Evans CJ (1996) Onchip morphology, tool wear and cutting mechanics in finish hard turning. Ann CIRP 45(1): 77-82