State of the art in hard turning

International Journal of Machine Tools and Manufacture

Volumn 53, Issue 1, 2012, Pages 1-14

  Bartarya, Gaurav ^a   Choudhury, S K ^b  

^a HARCOURT BUTLER TECHNOLOGICAL INSTITUTE   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

Author keywords

Hard turning; Machining; Tool wear; White layer

Indexed keywords

GRINDING (MACHINING); MACHINING; TURNING;

CUTTING EDGE GEOMETRY; CUTTING PARAMETERS; FINISH HARD TURNING; HARD TURNING; PROCESS EFFICIENCY; PROCESS PERFORMANCE; TOOL WEAR; WHITE LAYER;

CUTTING TOOLS;

EID: 83555174450     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2011.08.019     Document Type: Review

References (99)

1. D. Huddle New Hard Turning Tools and Techniques Offer a cost-effective Alternative to Grinding 2001 Tooling and Production Magazine
2. 〈http://www.mmsonline.com/articles/hard-turning-might-not-be-as- hard-as-you-think.aspx〉.
3. W. Grezesik, and T. Wanat Surface finish generated in HT of quenched alloy steel parts using conventional and wiper ceramic inserts International Journal of Machine Tools and Manufacture 46 2006 1988 1995 (Pubitemid 44442817)
4. Vincent Dessoly, Shreyes N. Melkote, and Christophe Lescalier Modeling and verification of cutting tool temperature in rotary tool turning of hardened steels International Journal of Machine Tools and Manufacture 44 2004 1463 1470
5. Abhijeet S. More, Wenping Jiang, W.D. Brown, and Ajay P. Malshe Tool wear and machining performance of cBNTiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel Journal of Materials Processing Technology 180 2006 253 262 (Pubitemid 44301859)
6. Z. Zurecki, R. Ghosh, J.H. Frey, Investigation of white layer formed in conventional and cryogenic hard turning of steel, in: Proceedings of ICEME03, ASME International. Mechanical Engineering Congress and Exposition, Washington D.C., November 1621, 2003.
7. A. Noorul Haq, and T. Tamizharasan Investigation of the effects of cooling in hard turning operations International Journal of Advanced Manufacturing Technology 30 2006 808 816 (Pubitemid 44569026)
8. M.A. Yallese, K. Chaoui, N. Zeghib, L. Boulanouar, and J. Rigal Hard machining of hardened bearing steel using cubic boron nitride tool Journal of Material Processing Technology 209 2009 1092 1104
9. W. Grzesik, J. Rech, and T. Wanat Surface finish on hardened bearing steel parts produced by superhard and abrasive tools International Journal of Machine Tools and Manufacture 47 2007 255 262 (Pubitemid 44738480)
10. V. Bana, B. Karpuschewski, J. Kundŕak, and A.M. Hoogstrate Thermal distortions in the machining of small bores Journal of Materials Processing Technology 191 2007 335 338 (Pubitemid 46873959)
11. Anselmo Eduardo Diniz, and Adilson Jośe de Oliveira Hard turning of interrupted surfaces using CBN tool Journal of Materials Processing Technology 195 2008 275 281 (Pubitemid 350186228)
12. J. Rech, and A. Moisan Surface integrity in finish hard turning of case-hardened steels International Journal of Machine Tools and Manufacture 43 2003 543 550
13. W. Grezesik Influence of tool wear on surface roughness in HT using differently shaped ceramic tools Wear 265 2008 327 335
14. A. Ebrahimi, and M.M. Moshksar Evaluation of machinability in turning of microalloyed and quenched-tempered steels: tool wear, statistical analysis, chip morphology Journal of Material Processing Technology 209 2009 910 921
15. J.M. Zhou, M. Andersson, and J.E. Stahl The monitoring of flank wear on the CBN tool in the hard turning process International Journal of Advanced Manufacturing Technology 22 2003 697 702
16. Jeffrey D. Thiele, and Shreyes N. Melkote Effect of cutting edge geometry and workpiece hardness on surface generation in finish hard turning of AISI 52100 steel Journal of Materials Processing Technology 94 1999 216 226 (Pubitemid 32080211)
17. Y. Karpat, and T. Ozel 3D FEA of HT, investigation of PCBN cutting tool micro geometry effect Transactions of NAMRI/SME 35 2007 1 8
18. T. Ozel, Y. Karpat, and A. Srivastava Hard turning with variable micro geometry PCBN tool CIRP Annals - Manufacturing Technology 57 2008 73 76
19. H.A. Kishawy, and J. Wilcox Tool wear and chip formation during HT with self propelled rotary tools International Journal of Machine Tools and Manufacture 43 2003 433 439
20. Tugrul Ozel, Yigit Karpat, Lus Figueira, and J.Paulo Davim Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts Journal of Materials Processing Technology 189 2007 192 198 (Pubitemid 46529196)
21. Noordin Mohd. Yusof, Affandi M. Zainal, Hendriko, and Denni Kurniawan Hard Turning of cold work tool steel using wiper ceramic tool Jurnal Mekanikal 25 2008 92 105
22. Gustavo de Siqueira Galoppi, Marco Stipkovic Filho, and Gilmar Ferreira Batalha Hard turning of tempered DIN100Cr6 steel with coated and no coated CBN inserts Journal of Materials Processing Technology 179 2006 146 153 (Pubitemid 44293348)
23. V.N. Gaitonde, S.R. Karnik, Luis Figueira, and J.Paulo Davim Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts International Journal of Refractory Metals and Hard Materials 27 2009 754 763
24. B. Denkena, D. Boehnke, and R. Meyer Reduction of wear induced surface zone effects during hard turning by means of new tool geometries Production Engineering Research and Development 2 2008 123 132
25. Hakan Thoors, H. Chandrasekaran, and Patrik Olund Study of some active wear mechanisms in a titanium-based cermet when machining steels Wear 162164 1993 l 11
26. M.Y. Noordin, V.C. Venkatesh, and S. Sharif Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools Journal of Materials Processing Technology 185 2007 83 90 (Pubitemid 46283382)
27. J. Paulo Davim, and Lús Figueira Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques Materials and Design 28 2007 1186 1191 (Pubitemid 44817469)
28. 3TiCN mixed ceramic tool Materials and Design 28 2007 1618 1622 (Pubitemid 44849249)
29. W. Grzesik, and Z. Zalisz Wear phenomenon in hard steel machining using ceramic tools Tribology International 41 2008 802 812
30. T.I.E.1. Wardany, and M.A. Elbestawi Prediction of Tool Failure Rate in Turning Hardened Steels International Journal of Advanced Manufacturing Technology 13 1997 1 16 (Pubitemid 127549044)
31. Cora Lahiff, Seamus Gordon, and Pat Phelan PCBN tool wear modes and mechanisms in finish hard turning Robotics and Computer-Integrated Manufacturing 23 2007 638 644 (Pubitemid 47241317)
32. H.M. Lin, Y.S. Liao, and C.C. Wei Wear behavior in turning high hardness alloy steel by CBN tool Wear 264 2008 679 684 (Pubitemid 351178758)
33. J.P. Costes, Y. Guillet, G. Poulachon, and M. Dessoly Tool-life and wear mechanisms of CBN tools in machining of Inconel 718 International Journal of Machine Tools and Manufacture 47 2007 1081 1087 (Pubitemid 46420760)
34. Sunghyuk Park, Shiv G. Kapoor, and Richard E. DeVor Microstructure-level model for the prediction of tool failure in WCCo cutting tool materials Journal of Manufacturing Science and Engineering, Transactions of the ASME 128 2006 739 748 (Pubitemid 44196741)
35. Ty.G. Dawson and Thomas R. KurfessDr., Wear Trends of PCBN Cutting Tools in Hard Turning, 〈www.mit.edu/∼cforest/project-gt/Dawson-Metz-Paper. pdf〉.
36. Yong Huang, Y. Kevin Chou, and Steven Y. Liang CBN tool wear in hard turning: a survey on research progresses International Journal of Advanced Manufacturing Technology 35 2007 443 453 (Pubitemid 350103386)
37. Yong Huang, and Steven Y. Liang Modeling of CBN tool flank wear progression in finish hard turning Transactions of the ASME, Journal of Manufacturing Science and Engineering 126 2004 98 106
38. G. Poulachon, A. Moisan, and I.S. Jawahir Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools Wear 250 2001 576 586 (Pubitemid 33053083)
39. Jing Shi, and C. Richard Liu The influence of material models on finite element simulation of machining Journal of Manufacturing Science and Engineering, Transactions of the ASME 126 2004 849 857 (Pubitemid 40337187)
40. G. Poulachon, B.P. bandopadhyay, I.S. Jawahir, Sebastien Pheulpin, and Emmanuel Seguin The influence of microstructure of hardened tool steel workpiece on the wear of PCBN cutting tool International Journal of Machine Tools and Manufacture 43 2003 139 144 (Pubitemid 35385293)
41. T. Tamizharasan, T. Selvaraj, and A. Noorul Haq Analysis of tool wear and surface finish in hard turning International Journal Advanced Manufacturing Technology 28 2006 671 679
42. Penalva Arizmendi, and Diaz Fernandez Effect of tool wear on roughness in hard turning Annals of CIRP 51 1 2002 57 60
43. Mehdi Remadna, and Jean Francois Rigal Evolution during time of tool wear and cutting forces in the case of hard turning with CBN inserts Journal of Materials Processing Technology 178 2006 67 75 (Pubitemid 44163113)
44. Y. Sahin Comparison of tool life between ceramic and cubic boron nitride (CBN) cutting tools when machining hardened steels Journal of Materials Processing Technology 2008 10.1016/j.jmatprotec.2008.08.016
45. W.F. Sales, L.A. Costa, S.C. Santos, A.E. Diniz, J. Bonney, and E.O. Ezugwu Performance of coated, cemented carbide, mixed-ceramic and PCBNH tools when turning W320 steel International Journal of Advanced Manufacturing Technology 41 2009 660 669
46. Farouk Mahfoudi, Gautier List, Alain Molinari, Abdelhadi Moufki, and Lakhdar Boulanouar High speed turning for hard material with PCBN inserts: tool wear analysis International Journal of Machining and Machinability of Materials 3 1/2 2008 62 79 (Pubitemid 351459348)
47. E.O. Ezugwu, R.B. Da Silva, J. Bonney, and A.R. Machado Evaluation of the performance of CBN tools when turning Ti6Al4V alloy with high pressure coolant supplies International Journal of Machine Tools and Manufacture 45 2005 1009 1014 (Pubitemid 40339660)
48. Y. Huang, and S.Y. Liang Modeling of cutting forces under hard turning conditions considering tool wear effect Transactions of the ASME, Journal of Manufacturing Science and Engineering 127 2005 262 270 (Pubitemid 40718379)
49. B. Fnides, H. Aouici, and M.A. Yallese Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic MECHANIKA Nr.2 70 2008 73 78 ISSN:13921207
50. Khaider Bouacha, Mohamed Athmane Yallese, Tarek Mabrouki, and Jean-François Rigal Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool International Journal of Refractory Metals and Hard Materials 28 2010 349 361
51. Hong Yan, J. Hua, and R. Shivpuri Numerical simulation of finish hard turning for AISI H13 die steel Science and Technology of Advanced Materials 6 2005 540 547 (Pubitemid 41261440)
52. D.I. Lalwani, N.K. Mehta, and P.K. Jain Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel Journal of Materials Processing Technology 206 2008 167 179
53. D. Umbrello, S. Rizzuti, J.C. Outeiro, R. Shivpuri, and R. MSaoubi Hardness-based flow stress for numerical simulation of hard machining AISI H13 tool steel Journal of Materials Processing Technology 199 2008 64 73
54. J.Y. Wang, and C.R. Liu The effect of tool flank wear on the heat transfer, thermal damage and cutting mechanics in finish hard tuning Annals of the ClRP 48 7 1999 53 58
55. Y.Kevin Chou, and Chris J. Evans White layers and thermal modeling of hard turned surfaces International Journal of Machine Tools and Manufacture 39 1999 1863 1881 (Pubitemid 30508629)
56. Y.B. Guo, and C.R. Liu 3D FEA modeling of hard turning Journal of Manufacturing Science and Engineering 124 2002 189 199 (Pubitemid 35202606)
57. Y. Huang, and S.Y. Liang Cutting forces modeling considering the effect of tool thermal property - application to CBN hard turning International Journal of Machine Tools and Manufacture 43 2003 307 315
58. Yong Huang, and Steven Y. Liang Force modelling in shallow cuts with large negative rake angle and large nose radius tools - application to hard turning International Journal of Advanced Manufacturing Technology 22 2003 626 632
59. Y.Kevin Chou, and Hui Song Thermal modeling for white layer predictions in finish hard turning International Journal of Machine Tools and Manufacture 45 2005 481 495 (Pubitemid 40142540)
60. T. Mabrouki, and J.-F. Rigal A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning Journal of Materials Processing Technology 176 2006 214 221 (Pubitemid 43841802)
61. Li Qian, and Mohammad Robiul Hossan Effect on cutting force in turning hardened tool steels with cubic boron nitride inserts Journal of Materials Processing Technology 191 2007 274 278 (Pubitemid 46873967)
62. X.J. Ren, Q.X. Yang, R.D. James, and L. Wang Cutting temperatures in hard turning chromium hardfacings with PCBN tooling Journal of Materials Processing Technology 147 2004 38 44
63. Jing Shi, and C. Richard Liu The Influence of material models on finite element simulation of machining, Journal of Manufacturing Science and Engineering Transactions of the ASME 126 2004 849 857 (Pubitemid 40337187)
64. S.S. Bosheh, and P.T. Mativenga White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling International Journal of Machine Tools and Manufacture 46 2006 225 233 (Pubitemid 41563986)
65. A. Ramesh, S.N. Melkote, L.F. Allard, L. Riester, and T.R. Watkins Analysis of white layers formed in hard turning of AISI 52100 steel Materials Science and Engineering A 390 2005 88 97 (Pubitemid 40014587)
66. Y.B. Guo, and J. Sahni A comparative study of hard turned and cylindrically ground white layers International Journal of Machine Tools and Manufacture 44 2004 135 145
67. Y.B. Guo, and S.C. Ammula Real-time acoustic emission monitoring for surface damage in hard machining International Journal of Machine Tools and Manufacture 45 2005 1622 1627 (Pubitemid 41203359)
68. G. Poulachon, A. Albert, M. Schluraff, and I.S. Jawahir An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning International Journal of Machine Tools and Manufacture 45 2005 211 218
69. Dale W. Schwach, and Y.B. Guo Feasibility of producing optimal surface integrity by process design in hard turning Materials Science and Engineering A 395 2005 116 123 (Pubitemid 40334967)
70. Anand Ramesh, and Shreyes N. Melkote Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel International Journal of Machine Tools and Manufacture 48 2008 402 414
71. Sangil Han, Shreyes N. Melkote, Michael S. Haluska, and Thomas R. Watkins White layer formation due to phase transformation in orthogonal machining of AISI 1045 annealed steel Materials Science and Engineering A 488 2008 195 204 (Pubitemid 351712699)
72. A. Aramcharoen, and P.T. Mativenga White layer formation and hardening effects in hard turning of H13 tool steel with CrTiAlN and CrTiAlN/MoST-coated carbide tools International Journal of Advanced Manufacturing Technology 36 2008 650 657
73. S. Ranganath, C. Guo, and P. Hegde A finite element modeling approach to predicting white layer formation in nickel superalloys CIRP Annals - Manufacturing Technology 58 2009 77 80
74. D. Umbrello, and L. Filice Improving surface integrity in orthogonal machining of hardened AISI 52100 steel by modeling white and dark layers formation CIRP Annals - Manufacturing Technology 58 2009 73 76
75. A.W. Warren, and Y.B. Guo Characteristics of residual stress profiles in hard turned versus ground surfaces with and without a white layer Journal of Manufacturing Science and Engineering 131 2009 041004-(1-10)
76. Y.B. Guo, S. Anurag, and I.S. Jawahir A novel hybrid predictive model and validation of unique hook-shaped residual stress profiles in hard turning CIRP Annals - Manufacturing Technology 58 2009 81 84
77. Dale W. Schwach, and Y.B. Guo A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue International Journal of Fatigue 28 2006 1838 1844 (Pubitemid 44344314)
78. Y.B. Guo, A.W. Warren, and F. Hashimoto The basic relationships between residual stress, white layer, and fatigue life of hard turned and ground surfaces in rolling contact CIRP Journal of Manufacturing Science and Technology 2 2010 129 134
79. Y. Matsumoto, F. Hashimoto, and G. Lahoti Surface Integrity Generated by Precision Hard Turning Annals of the CIRP - Manufacturing Technology 48 7 1999 59 62
80. Fredrik Gunnberg, Marcel Escursell, and Michael Jacobson The influence of cutting parameters on residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel Journal of Materials Processing Technology 174 2006 82 90
81. Ataollah Javidi, Ulfried Rieger, and Wilfried Eichlseder The effect of machining on the surface integrity and fatigue life International Journal of Fatigue 30 2008 2050 2055
82. D. Umbrello, G. Ambrogio, L. Filice, and R. Shivpuri A hybrid finite element methodartificial neural network approach for predicting residual stresses and the optimal cutting conditions during hard turning of AISI 52100 bearing steel Materials and Design 29 4 2008 873 883 (Pubitemid 351227244)
83. D. Umbrello, J.C. Outeiro, R. MSaoubi, A.D. Jayal, and I.S. Jawahir A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steel CIRP Annals - Manufacturing Technology 59 2010 113 116
84. Wenping Jiang, Abhijeet S. More, W.D. Brown, and Ajay P. Malshe A cBN-TiN composite coating for carbide inserts: coating characterization and its applications for finish hard turning Surface and Coatings Technology 201 2006 2443 2449 (Pubitemid 44742929)
85. Stephen Smith, Shreyes N. Melkote, Edgar Lara-Curzio, Thomas R. Watkins, Larry Allard, and Laura Riester Effect of surface integrity of hard turned AISI 52100 steel on fatigue performance Materials Science and Engineering A 459 2007 337 346 (Pubitemid 46586118)
86. R.A. Waikar, and Y.B. Guo A comprehensive characterization of 3D surface topography induced by hard turning vs. grinding Journal of Materials Processing Technology 197 13 2008 189 199 (Pubitemid 350251147)
87. X.L. Liu, D.H. Wen, Z.J. Li, L. Xiao, and F.G. Yan Experimental study on hard turning hardened GCr15 steel with PCBN tool Journal of Material Processing Technology 129 2002 217 221
88. D. Umbrello, G. Ambrogio, L. Filice, and R. Shivpuri An ANN approach for predicting subsurface residual stresses and the desired cutting conditions during hard turning Journal of Materials Processing Technology 189 2007 143 152 (Pubitemid 46529192)
89. S. Kaewkuekool, V. Laemlaksakul, C. Rachavong, The study of influent in surface quality of hard turning, in: Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management, Singapore, 24 December, 2007, pp. 729732.
90. Singh Dilbag, and P.V. Rao Performance improvement of hard turning with solid lubricants International Journal of Advanced Manufacturing Technology 38 2008 529 535
91. C. Bruni, A. Forcellese, F. Gabrielli, and M. Simoncini Hard turning of an alloy steel on a machine tool with a polymer concrete bed Journal of Materials Processing Technology 202 2008 493 499 (Pubitemid 351615576)
92. A.S. Varadarajan, P.K. Philip, and B. Ramamoorthy Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning International Journal of Machine Tools and Manufacture 42 2002 193 200 (Pubitemid 33018901)
93. C.H.R. Vikram Kumar, and B. Ramamoorthy Performance of coated tools during hard turning under minimum fluid application Journal of Materials Processing Technology 185 2007 210 216 (Pubitemid 46283405)
94. A.E. Diniz, J.R. Ferreira, and F.T. Filho Influence of refrigeration/lubrication condition on SAE 52100 hardened steel turning at several cutting speeds International Journal of Machine Tools and Manufacture 43 2003 317 326
95. H.E.O. Sung Jung Environmentally conscious hard turning of cemented carbide materials on the basis of micro-cutting in SEM (2nd report): stress turning with three kinds of cutting tools Journal of Mechanical Science and Technology 23 2009 1959 1966
96. J.M. Zhou, M. Andersson, and J.E. Ståhl Identification of cutting errors in precision hard turning process Journal of Materials Processing Technology 153154 2004 746 750
97. J. Kundrak, B. Karpuschewski, K. Gyani, and V. Bana Accuracy of hard turning Journal of Materials Processing Technology 202 2008 328 338 (Pubitemid 351615567)
98. B. Fnides, M.A. Yallese, and H. Aouic Hard turning of hot work steel AISI H11: evaluation of cutting pressures, resulting force and temperature, ISSN 13921207 MECHANIKA 4 72 2008 59 63
99. Michael P. Vogler, Shiv G. Kapoor, and Richard E. DeVor On the modeling and analysis of machining performance in micro-endmilling, part ii: cutting force prediction Transactions of the ASME, Journal of Manufacturing Science and Engineering 126 2004 695 705 (Pubitemid 40329876)