Microstructure-level model for the prediction of tool failure in WC-Co cutting tool materials

Journal of Manufacturing Science and Engineering

Volumn 128, Issue 3, 2006, Pages 739-748

  Park, Sunghyuk ^a   Kapoor, Shiv G ^a   DeVor, Richard E ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COBALT ALLOYS; COMPUTER SIMULATION; FINITE ELEMENT METHOD; FRACTURE; MATHEMATICAL MODELS; METAL CUTTING; MICROSTRUCTURE;

CHIPPING; FEEDRATE; TOOL FAILURE; WC-CO CUTTING;

MACHINE DESIGN;

EID: 33746928433     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2194233     Document Type: Article

References (34)

1. Loladze, T. N., 1975, "Nature of Brittle Failure of Cutting Tool," CIRP Ann., 24(1), pp. 13-16.
2. Uehara, K., and Kanda, Y., 1977, "On the Chipping Phenomena of Carbide Cutting Tools," CIRP Ann., 25(1), pp. 11-16.
3. Williams, W. S., 1964, "Influence of Temperature, Strain Rate, Surface Condition, and Composition on the Plasticity of Transition-Metal Carbide Crystals," J. Appl. Phys., 35(4), pp. 1329-1338.
4. Lee, I. C., and Sakuma, T., 1997, "High-Temperature Tensile Ductility in WC-Co Cemented Carbides," Metall. Mater. Trans. A, 28A, pp. 1843-1847.
5. Pandey, P. C., Bhatia, S. M., and Shan, H. S., 1979, " Thermomechanical Failure of Cemented Carbide Tools in Intermittent Cutting," CIRP Ann., 28(1), pp. 13-17.
6. Chandrasekaran, H., 1985, "Thermal Fatigue Studies on Tool Carbides and Its Relevance of Milling Cutters," CIRP Ann., 34(1), pp. 125-128.
7. Liu, B., Zhang, Y., and Ouyang, S., 2000, "Study on the Relation between Structural Parameters and Fracture Strength of WC-Co Cemented Carbides," Mater. Chem. Phys., 62, pp. 35-43.
8. Gurland, J., 1984, "Application of Quantitative Microscopy to Cemented Carbides," ASTM STP, 839, ASTM Philadelphia, PA, pp. 65-84.
9. Tlusty, J., and Masood, Z., 1978, "Chipping and Breakage of Carbide Tools," ASME J. Eng. Ind., 100, pp. 403-412.
10. Sampath, W. S., Lee, Y. M., and Shaw, M. C., 1984, "Tool Fracture Probability under Steady State Cutting Conditions," ASME J. Eng. Ind., 106, pp. 161-167.
11. Wu, H., and Mayer, J. E., Jr., 1979, "An Analysis of Thermal Cracking of Carbide Tools in Intermittent Cutting," ASME J. Eng. Ind., 101, pp. 159-164.
12. Hirao, M., Murata, R., and Takeyama, H., 1977, "Microscopic Stress Analysis of Sintered Carbide," CIRP Ann., 25(1), pp. 27-31.
13. Fischmeister, H. F., Schmauder, S., and Sigl, L. S., 1988, "Finite Element Modelling of Crack Propagation in WC-Co Hard Metals," Mater. Sci. Eng., A, 105/106, pp. 305-311.
14. Sigl, L. S., and Fischmeister, H. F., 1988, "On the Fracture Toughness of Cemented Carbides," Acta Metall., 36(4), pp. 887-897.
15. Chuzhoy, L., DeVor, R. E., Kapoor, S. G., and Bammann, D. J., 2002, "Microstructure-Level Modeling of Ductile Iron Machining," ASME J. Manuf. Sci. Eng., 124, pp. 162-169.
16. Park, S., Kapoor, S. G., and DeVor, R. E., 2004, "Mechanistic Cutting Process Calibration Via Microstructure-Level Finite Element Simulation Model," ASME J. Manuf. Sci. Eng., 126(4), pp. 706-709.
17. Betteridge, W., 1979, "The Properties of Metallic Cobalt," Prog. Mater. Sci., 24(2), pp. 51-142.
18. Engineering Properties of Selected Ceramic Materials, 1966, American Ceramic Society, J. F. Lynch, C. G. Ruderer, and W. H. Duckworth, eds., American Chemical Society.
19. Munro, R. G., 1997, "Material Properties of a Sintered α-SiC," J. Phys. Chem. Ref. Data, 26(5), pp. 1195-1203.
20. Ng, E., El-Wardany, T. I., Cumitrescu, M., and Elbestawi, M., 2002, "Physics Based Simulation of High Speed Machining," in Proceedings of the 5th CIRP International Workshop on Modeling of Machining Operations, May 2002, Purdue University, West Lafayette, IN, pp. 1-19.
21. Özel, T., and Altan, T., 1998, "Modeling of High Speed Machining Processes for Predicting Tool Forces, Stresses and Temperatures Using FEM Simulations," in Proceedings of the CIRP International Workshop on Modeling of Machining Operations, May 19, 1998, Atlanta, GA, pp. 225-234.
22. Warren, R., 1978, "Measurement of the Fracture Properties of Brittle Solids by Hertzian Indentation," Acta Metall., 26, pp. 1756-1769.
23. Griffith, A. A., 1921, "The Phenomena of Rupture and Flow in Solids," Philos. Trans. R. Soc. London, Ser. A, 221, pp. 163-198.
24. Dixon, G., and Wright, N., 1989, "Creep Deformation of WC-Co Alloys," Int. J. Refract. Met. Hard Mater., 8, pp. 55-60.
25. Rice, J. R., and Tracey, D. M., 1969, "On the Ductile Enlargement of Voids in Triaxial Stress Fields," J. Mech. Phys. Solids, 17(3), pp. 201-217.
26. Marini, B., Mudry, F., and Pineau, A., 1985, "Experimental Study of Cavity Growth in Ductile Rupture," Eng. Fract. Mech., 22(6), pp. 989-996.
27. Santhanam, A. T., and Tierney, P., 1989, "Cemented Carbides, " Metals Handbook, 9th ed., ASM International, Vol. 16, pp. 71-89.
28. Warren, R., 1976, "Determination of the Interfacial Energy Fatio in Two-Phase Systems by Measurement of Interphase Contact," Metallography, 9, pp. 183-191.
29. Chermant, J. L., and Osterstock, F., 1976, "Fracture Toughness and Fracture of WC-Co Composites," J. Mater. Sci., 11, 1939-1951.
30. Suresh, S., Shih, C. F., Morrone, A., and O'Dowd, N. P., 1990, "Mixed-Mode Fracture Toughness of Ceramic Materials," J. Am. Ceram. Soc., 73(5), pp. 1257-1267.
31. Eftis, J., and Subramonia, N., 1978, "The Inclined Crack under Biaxial Load," Eng. Fract. Mech., 10, pp. 43-67.
32. Torres, Y., Anglada, M., and Lianes, L., 2001, "Fatigue Mechanics of WC-Co Cemented Carbides," Int. J. Refract. Met. Hard Mater., 19, pp. 341-348.
33. Exner, H. E., Sigl, L., Fripan, M., and Pompe, O., 2001, "Fractography of Critical and Subcritical Cracks in Hard Materials," Int. J. Refract. Met. Hard Mater., 19, pp. 329-334.
34. Godse, R., and Gurland, J., 1988, "Applicability of the Critical Strain Fracture Criterion to WC-Co Hard Metals," Mater. Sci. Eng., A, 105/106, pp. 331-336.