CBN tool wear in hard turning: A survey on research progresses

International Journal of Advanced Manufacturing Technology

Volumn 35, Issue 5-6, 2007, Pages 443-453

  Huang, Yong ^a   Chou, Y Kevin ^b   Liang, Steven Y ^c  

^a AMRL   (United States)

^b University of Alabama   (United States)

^c GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

CBN; Hard turning; Wear mechanism; Wear pattern; Wear rate

Indexed keywords

BORON NITRIDE; GRINDING (MACHINING); POLYCRYSTALLINE MATERIALS; PROCESS CONTROL; TURNING; WEAR OF MATERIALS;

HARD TURNING; SUPERHARD MATERIALS; TRIBOCHEMICAL INTERACTIONS; WEAR PATTERNS; WEAR RATES;

MACHINE TOOLS;

EID: 36148964096     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-006-0737-6     Document Type: Article

References (68)

1. König W, Hochschule T, Komanduri R, Schenectady D, Tönshoff HK (1984) Machining of hard materials. Annal CIRP 33(2):417-427
2. König W, Neises A (1993) Wear mechanisms of ultrahard, non-metallic cutting materials. Wear 162-164:12-21
3. Tönshoff HK, Arendt C, Amor RB (2000) Cutting of hardened steel. Annal CIRP 49(2):547-566
4. National Institute of Standards and Technology, Advanced Technology Program (2004) Enabling technologies for lean manufacturing of hardened steel applications, http://jazz.nist.gov/atpcf/prjbriefs/prjbrief.cfm?ProjectNumber= 00-00-4143. Cited February 2004
5. Heath PJ (1986) Properties and uses of AMBORITE. Ind Diamond Rev 46:120-127
6. Heath PJ (1984) Ultra hard materials. Met Mater 3:105-117
7. Sumitomo Electric Carbide (2001) Sumitomo PCD and CBN Technical presentation, Sumitomo Electric Carbide, New York
8. Moore DF (1975) Principles and application of tribology. Pergamon, Oxford
9. Shaw MC (1984) Metal cutting principles. Oxford University Press, Oxford
10. Turley DM (1974) A scanning electron microscopy study of attrition wear in tungsten carbide pin reamers. Wear 77:259-266
11. Suh NP (1986) Tribophysics. Prentice-Hall, Englewood Cliffs, NJ
12. Gahr KZ (1987) Microstructure and wear of materials. Elsevier, NY
13. North B (1989) Indexable metal cutting inserts. Factors influencing machining and their controls, proceedings of an international conference and workshop, Cincinnati, Ohio, 12-14 September 1989, pp 33-42
14. Chou YK, Evans CJ (1997) Tool wear mechanism in continuous cutting of hardened tool steels. Wear 212:59-65
15. Takatsu S, Shimoda H, Otani K (1983) Effect of CBN content on the cutting performance of polycrystalline CBN tools. Int J Refract Hard Mat 2(4):175-178
16. Hodgson T, Trendler PHH (1981) Turning hardened tool steels with cubic boron nitride inserts. Annals CIRP 30(1):63-66
17. Kishawy HA, Elbestawi MA (1999) Effects of process parameters on material side flow during hard turning. Inter J Mach Tools Manuf 39:1017-1030
18. Chryssolouris G (1982) Turning of hardened steels using CBN tools. J Appl Metalwork 2(2):100-106
19. Tönshoff HK (1995) Hard turning: influences on the workpiece properties. Trans NAMRI/SME 23:215-220
20. Abrao AM, Wise MLH, Aspinwall DK (1995) Tool life and workpiece surface integrity evaluations when machining hardened AISI 52100 steels with conventional ceramic and PCBN tool materials. SME Tech Pap MR95-159:1-9
21. Dewes RC, Aspinwall DK (1996) The use of high speed machining for the manufacture of hardened steel dies. Trans NAMRI/SME 24:21-26
22. Bhaumik SK, Divakar C, Singh AK (1995) Machining Ti-6Al-4V alloy with a WBN-CBN composite tool. Mater Des 16(4):221-226
23. Dawson T (2002) Machining hardened steel with polycrystalline cubic boron nitride cutting tools. PhD Thesis, Georgia Institute of Technology, Atlanta, GA
24. Huang Y (2002) Predictive modeling of tool wear rate with application to CBN hard turning. PhD Thesis, Georgia Institute of Technology, Atlanta, GA
25. Narukati N, Yamane Y (1979) Tool wear and cutting temperature of CBN tools in machining of hardened steels. Annal CIRP 28(1):23-28
26. Davies MA, Chou Y, Evans CJ (1996) On chip morphology, tool wear and cutting mechanics in finish hard turning. Annal CIRP 45(1):77-82
27. Poulachon G, Moisan A, Jawahir IS (2001) Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools. Wear 250:576-586
28. Bhattacharyya SK, Aspinwall D (1982) The application of polycrystalline tooling. Mach Hard Mater SME:95-103
29. Dearnley PA, Grearson AN (1986) Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI318. Mater Sci Technol 2:47-58
30. Kramer BM (1986) A comprehensive tool wear model. Annal CIRP 35(1):67-70
31. Zimmermann M, Lahres M, Viens DV, Laube BL (1997) Investigations of the wear of cubic boron nitride cutting tools using auger electron spectroscopy and X-ray analysis by EPMA. Wear 209:241-246
32. Rai G (1993) The metallurgy of CBN and its wear in high speed machining of ferrous materials. Machining of advanced materials, Proceeding of the International Conference on Machining of Advanced Materials, Gaithersburg, MD, 20-22 July 1993, pp 501-514
33. Eda H, Kishi K, Hashimoto H (1980) Wear resistance and cutting ability of a newly developed cutting tools. Cutting tool materials, Proceedings of an International Conference, American Society for Metals, Ft. Mitchell, KY, 15-17 September 1980, pp 265-280
34. Hooper RM, Shakib JI, Brookes CA (1988) Microstructure and wear of TiC-Cubic BN tools. Mater Sci Eng A105/106:429-433
35. Klimenko SA, Mukovoz YA, Lyashko VA, Ogorodnik VV, Vashchenko AN (1988) Wear on cubic boron nitride tools. Soviet J Superhard Mater 10(2):53-57
36. Klimenko SA, Mukovoz YA, Lyashko VA, Vashchenko AN, Ogorodnik VV (1992) On the wear mechanisms of cubic boron nitride base cutting tool. Wear 157:1-7
37. Klimenko SA, Mukovoz YA, Vashchenko AN, Ivas'kevich YV (1993) Contact interaction between polycrystalline CBN cutting tools and a workpiece material. J Superhard Mater 15(3):39-41
38. Klimenko SA (1995) Kinetics of tool wear in turning martensitic steels. J Superhard Mater 17(2):62-65
39. Chou Y (1994) Wear mechanism of cubic boron nitride tools in precision turning of hardened steels. PhD Thesis, Purdue University, West Lafayette, IN
40. Barry J, Byrne G (2001) Cutting tool wear in the machining of hardened steel, part 2: cubic boron nitride cutting tool wear. Wear 247:152-160
41. Sista PS, Swain SO, Chandrasekar S, Farris TN (1997) Tool wear characteristics of CBN tools in the finish machining of tool steels. Manuf Sci Technol ASME MED 6(2):161-168
42. Chou YK, Evans CJ, Barash MM (2002) Experimental investigation on CBN turning of hardened AISI 52100 steel. J Mater Process Technol 124:274-283
43. Chou Y, Barash MM (1995) Review on hard turning and CBN cutting tools. SME Tech Pap MR95-214:1-12
44. Chou YK, Evans CJ (1999) Cubic boron nitride tool wear in interrupted hard cutting. Wear 225:234-245
45. Nakayama K, Arai M, Kanda T (1988) Machining characteristics of hard materials. Annal CIRP 37(1):89-92
46. Hitchiner MP, Wilks J (1987) Some remarks on the chemical wear of diamond and cubic BN during turning and grinding. Wear 114:327-338
47. Hooper RM, Parry A, Shakib JI, Brookes CA (1989) Mechanical properties, microstructure and wear of DBC50. Ind Diamond Rev 49:170-173
48. König W, Iding M, Link R (1990) Fine turning and drilling hardened steels. Ind Diamond Rev 50:79-85
49. Huang Y, Liang SY (2003) Cutting forces modeling considering the effect of tool thermal property-application to CBN hard turning. Int J Mach Tools Manuf 43(3):307-315
50. Varadarajan AS, Philip PK, Ramamoorthy B (2002) Investigation of hard turning with minimal cutting fluid application and its comparison with dry and wet turning. Int J Mach Tools Manuf 42:193-200
51. Rabinowicz E, Dunn LA, Russell PG (1961) A study of abrasive wear under three-body conditions. Wear 4:345-355
52. Archard JF (1953) Contact and rubbing of flat surfaces. J App Phy 24:981-988
53. Shaw MC, Dirke SO (1956) On the wear of cutting tools. Microtechnic 10(4):187-193
54. Kannatey-Asibu E Jr (1985) A transport-diffusion equation in metal cutting and its application to analysis of the rate of flank wear. ASME J Eng Ind 107:81-89
55. Loladze TN (1981) Of the theory of diffusion wear. Annal CIRP 30(1):71-76
56. Usui E, Shirakashi T, Kitagawa T (1978) Analytical prediction of three-dimensional cutting process, part 3: cutting temperature and crater wear of carbide tool. J Eng Ind 100:236-243
57. Kramer BM, Judd PK (1985) Computational design of wear coating. J Vac Sci Technol A3(6):2439-2444
58. Kramer BM (1986) Predicted wear resistances of binary carbide coatings. J Vac Sci Technol A4(6):2870-2873
59. Huang Y, Liang SY (2004) Modeling of CBN tool flank wear progression in finish hard turning. ASME J Manuf Sci Eng 126(1):98-106
60. Huang Y, Liang SY (2004) Modeling of CBN tool crater wear in finish hard turning. Int J Adv Manuf Technol 24(9-10):632-639
61. Huang Y, Dawson TG (2005) Tool crater wear depth modeling in CBN hard turning. Wear 258(9):1455-1461
62. Huang Y, Liang, SY (2005) Modeling of cutting forces under hard turning condition considering tool wear effect. ASME J Manuf Sci Eng 127(2):262-270
63. Waldorf DJ (1996) Shearing, ploughing and wear in orthogonal machining. PhD Thesis, Uinv. of Illinois at Urbana-Champaign, IL
64. Huang Y, Liang, SY (2003) Modeling of cutting temperature distribution under the tool flank wear effect. Proc Instn Mech Engrs, Part C. J Mech Eng Sci 217(11):1195-1208
65. Huang Y, Liang SY (2003) Cutting forces modeling considering the effect of tool thermal property-application to CBN hard turning. Int J Mach Tools Manuf 43(3):307-315
66. Li X (1997) Development of a predictive model for stress distributions at the tool-chip interface in machining. J Mater Process Technol 63:169-174
67. Oxley PLB (1989) Mechanics of machining, an analytical approach to assessing machinability, Ellis Horwood, West Sussex, England
68. Astakhov VP (2004) The assessment of cutting tool wear. Int J Mach Tools Manuf 44:637-647