Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts

International Journal of Refractory Metals and Hard Materials

Volumn 27, Issue 4, 2009, Pages 754-763

  Gaitonde, V N ^a   Karnik, S R ^a   Figueira, Luis ^b   Paulo Davim, J ^b  

^a KLE TECHNOLOGICAL UNIVERSITY   (India)

^b UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

AISI D2 cold work tool steel; Ceramic inserts; Hard turning; Machinability; Response surface methodology

Indexed keywords

AISI D2 COLD WORK TOOL STEEL; CERAMIC INSERTS; CUTTING FORCES; DEPTH OF CUTS; FULL FACTORIAL DESIGNS; GRINDING PROCESS; HARD TURNING; HIGH PRECISION; INCREASED PRODUCTIVITIES; MACHINING FORCES; MACHINING TIME; MATERIAL PROPERTIES; PARAMETRIC ANALYSIS; PROCESSING COSTS; REDUCED POWER CONSUMPTION; RESPONSE SURFACE METHODOLOGY; SECOND ORDERS; SURFACE QUALITIES; TOOL WEARS;

CERAMIC CUTTING TOOLS; CERAMIC MATERIALS; CHROMIUM; CUTTING; CUTTING TOOLS; GRINDING (COMMINUTION); GRINDING (MACHINING); SURFACE PROPERTIES; SURFACE ROUGHNESS; TURNING;

TOOL STEEL;

EID: 64049104389     PISSN: 02634368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijrmhm.2008.12.007     Document Type: Article

References (38)

1. Konig W., Berktold A., and Koch K.F. Turning versus grinding-a comparison of surface integrity aspects and attainable accuracies. Ann CIRP 42 1 (1993) 39-43
2. Tonshoff H.K., Arendt C., and Ben Amor R. Cutting of hardened steel. Ann CIRP 49 2 (2000) 547-566
3. Tonshoff H.K., Wobker H.G., and Brandt D. Tool wear and surface integrity in hard turning. Prod Eng 3 1 (1996) 19-24
4. Tonshoff H.K., Wobker H.G., and Brandt D. Hard turning-Influence on the workpiece properties. Trans NAMRI/SME 23 (1995) 215-220
5. Zou J.M., Anderson M., and Stahl J.E. Identification of cutting errors in precision hard turning process. J Mater Process Tech 153-154 (2004) 746-750
6. Rech J., and Moisan A. Surface Integrity in finish hard turning of case hardened steels. Int J Mach Tool Manuf 43 (2003) 543-550
7. Destefani J. Technology key to mold making success. Manuf Eng 133 4 (2004) 59-64
8. Elbestawi M.A., Chen L., Becze C.E., and EI-Wardany T.I. High-speed milling of dies and molds in their hardened state. Ann CIRP 46 1 (1997) 57-62
9. Byrne G., Dornfeld D., and Denkena B. Advancing cutting technology. Ann CIRP 52 2 (2003) 483-507
10. Klocke F., Brinskmeier E., and Weinert K. Capability profile of hard cutting and grinding processes. Ann CIRP 54 2 (2005) 557-580
11. Guo Y.B., and Sahni J.A. Comparative study of hard turned and cylindrically ground white layers. Int J Mach Tool Manuf 44 (2004) 135-145
12. Huang Y., and Liang S.Y. Cutting forces modeling considering the effect of tool thermal property-application to CBN hard turning. Int J Mach Tool Manuf 43 (2003) 307-315
13. Chou Y.K., and Evans C.J. Tool wear mechanism in continuous cutting of hardened tool steels. Wear 212 (1997) 59-65
14. Chou Y.K., Evans C.J., and Barash M.M. Experimental investigation on CBN turning of hardened AISI 52100 steel. J Mater Process Tech 124 (2002) 274-283
15. Thiele J.D., and Melkote S.N. Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel. J Mater Process Tech 94 (1999) 216-226
16. Thiele J.D., Melkote S.N., Peascoe R.A., and Watkins T.R. Effect of cutting edge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 steel. ASME J Manuf Scien Eng 122 (2000) 642-649
17. Ozel T., Hsu T.-.K., and Zeren E. Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel. Int J Adv Manuf Tech 25 3-4 (2000) 262-269
18. Poulachon G., Bandyopadhyay B.P., Jawahir I.S., Pheulpin S., and Seguin E. The influence of the microstructure of hardened tool steel workpiece on the wear of PCBN cutting tools. Int J Mach Tool Manuf 43 (2003) 139-144
19. EI-Wardany T.I., Kishawy H.A., and Elbestawi M.A. Surface integrity of die material in high-speed hard machining, Part 1, Micro graphical analysis. ASME J Manuf Scien Eng 122 4 (2000) 620-631
20. EI-Wardany T.I., Kishawy H.A., and Elbestawi M.A. Surface integrity of die material in high-speed hard machining, Part 2, Micro hardness variations and residual stresses. ASME J Manuf Scien Eng 122 4 (2000) 632-641
21. Kishawy H.A., and Elbestawi M.A. Tool wear and surface integrity during high-speed turning hardened steel with polycrystalline cubic boron nitride tools. J Eng Manuf 215 (2001) 755-767
22. Chou Y.K., and Song H. Tool nose radius effects on finish turning. J Mater Process Tech 148 (2004) 259-268
23. Benga G.C., and Abrao A.M. Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools. J Mater Process Tech 143-144 (2003) 237-241
24. Kumar A.S., Durai R., and Sornakumar T. Machinability of hardened steel using alumina based ceramic cutting tools. Int J Ref Met Hard Mat 21 (2003) 109-117
25. Lima J.G., Avila R.F., Abrao A.M., Faustino M., and Davim J.P. Hard turning AISI 4340 high strength low alloy steel and AISI D2 cold work steel. J Mater Process Tech 169 (2005) 388-395
26. Grzesik W., and Wanat T. Comparative assessment of surface roughness produced by hard machining with mixed ceramic tools including 2D and 3D analysis. J Mater Process Tech 169 (2005) 364-371
27. Grzesik W., and Wanat T. Hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts. Int J Mach Tool Manuf 46 (2006) 1988-1995
28. Klocke F., and Kratz H. Advanced tool edge geometry for high precision hard turning. Ann CIRP 54 1 (2005) 47-50
29. Grzesik W. Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools. Wear 265 (2008) 327-335
30. Schwach D.W., and Guo Y.B. Feasibility of producing optimal surface integrity by process design in hard turning. Mat Scien Eng 395 (2005) 116-123
31. Pavel R., Marinescu I., Deis M., and Pillar J. Effect of tool wear on surface finish for a case of continuous and interrupted hard turning. J Mater Process Tech 170 (2005) 341-349
32. Diniz A.E., and Oliveira A.J. Hard turning of interrupted surfaces using CBN tools. J Mater Process Tech 195 (2008) 275-281
33. Ozel T., and Karpat Y. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. Int J Mach Tool Manuf 4 (2005) 467-479
34. Quiza R., Figueira L., and Davim J.P. Comparing statistical models and artificial networks on predicting the tool wear in hard machining D2 AISI steel. Int J Adv Manuf Tech 37 (2008) 641-648
35. Davim J.P., and Figueira L. Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques. Mat Des 28 (2007) 1186-1191
36. Ozel T., Karpat Y., Figueira L., and Davim J.P. Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts. J Mater Process Tech 189 (2007) 192-198
37. Davim J.P., and Figueira L. Comparative evaluation of conventional and wiper ceramic tools on cutting forces, surface roughness and tool wear in hard turning AISI D2 steel. J Eng Manuf. 221 (2007) 625-633
38. Montgomery D.C. Design and analysis of experiments (1997), John Wiley, New York