Effect of tool flank wear on the heat transfer, thermal damage and cutting mechanics in finish hard tuning

CIRP Annals - Manufacturing Technology

Volumn 48, Issue 1, 1999, Pages 53-58

  Wang, J Y ^a   Liu, C R ^a   Wang, K K ^b  

^a PURDUE UNIVERSITY   (United States)

^b Department of Molecular Biology and Genetics   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY CONDITIONS; CUTTING; GREEN'S FUNCTION; HEAT TRANSFER; INTERFACES (MATERIALS); MATHEMATICAL MODELS; SHEAR STRESS; TEMPERATURE; THERMAL EFFECTS; WEAR OF MATERIALS;

CHIP FORMATION; CUTTING MECHANICS; HARD TUNING; ORTHOGONAL HARD TURNING; THERMAL DAMAGE; TOOL FLANK WEAR;

TURNING;

EID: 0032684617     PISSN: 00078506     EISSN: None     Source Type: None    
DOI: 10.1016/S0007-8506(07)63130-8     Document Type: Article

References (25)

1. Liu, C., 1973, An Investigation of the Surface Condition in a Steel Component Machined by Chip Removal Process, Ph.D. Thesis, Purdue University, West Lafayette.
2. Liu, C. R. and Barash, M. M., 1976, The Mechanical State of the Sublayer of a Surface Generated by Chip-Removal Process, Part 2: Cutting with a Tool with Flank Wear. Journal of Engineering for Industry, 1203-1208.
3. Matsumoto, Y., Barash, M. M. and Liu, C. R., 1984, Residual Stress in the Machined Surface of Hardened Steel, High Speed Removal: Theory, Research and Practice, ASME Bound Volume, 192-204.
4. König, W. Berktold, A. and Koch, K. F., 1993, Turning Versus Grinding - A Comparison of Surface Integrity Aspects and Attainable Accuracies. Annals of the CIRP, 42(I):39-43.
5. Tonshoff, H. K., Brandt, D. and Wobker, H. G., 1995a, Potential and Limitation of Hard Turning. In 1st International Machining and Grinding Conference, Dearborn, Michigan, 965-978.
6. Tonshoff, H. K., Wobker, H. G. and Brandt, D., 1995b, Tribological Aspects of Hard Turning with Ceramic Tools, Journal of the Society of Tribologists and Lubrication Engineers, 51(2):163-168.
7. Zorev, N. N., 1966, Metal Cutting Mechanics. Pergamon Press, New York.
8. Chao, B. T. and Trigger, K. J., 1958, Temperature Distribution at Tool-Chip and Tool-work Interface in Metal Cutting. Transactions of the ASME, 311-320.
9. Boothroyd, G., Eagle, J. M. and Chisholm, A. W. J., 1967, Effect of Tool Flank Wear on the Temperature Generated during Metal Cutting, Proceedings of the MTDR, 667-680.
10. Muraka, P. D., Barrow, G. and Hinduj'a, S., 1979, Influence of the Process Variables on the Temperature Distribution in Orthogonal Machining using the Finite Element Method. International Journal of Mechanic Science, 21:445-456.
11. Lin Z. C. and Pan, W. C., 1993, A Thermoelastic-Plastic Large Deformation Model for Orthogonal Cutting with Tool Flank Wear - Part 1: Computation Procedures. International Journal of Mechanical Science, 35(10):829-840.
12. Li, X., Kopalinsky, E. M., and Oxley, P. L. B., 1995, A Numerical Method for Determining Temperature Distributions in Machining with Coolant Part 1: Modeling the Process. Proc. Inst. Mech. Engrs., 209:33-43.
13. Harris, A. G., 1981, An Investigation to Derive a Method of Predicting the Contribution of Tool Flank Wear to Tool Forces in Orthogonal Machining. Report, IE, UNSW.
14. Beck, J. V., Cole, K. D., Hajj]-Sheikh, A. and LitkouhiB., 1992, Heat Conduction Using Green's Function, Hemisphere.
15. Wang, J. Y. and Liu, C. R., 1998. On the Forces and Temperatures due to Flank Wear in Hard Turning. Manufacturing Science and Engineering, ASME MED, Vol. 8.
16. Leone., W. C., 1954. Distribution of Shear-zone Heat in Metal Cutting, Transactions of the ASME, 121-125.
17. Loewen, E. G. and Shaw, M. C., 1954, On the Analysis of Cutting-tool Temperatures, Transactions of ASME, 217-231.
18. Komanduri, R., 1982, Some Clarifications on the Mechanics of Chip Formation when Machining Titanium Alloys, Wear, 76, 15-34.
19. Jaeger, J. C., 1942, Moving Sources of Heat and the Temperature at Sliding Contacts. J. Proc. Roy. Soc., 76:203-224, New South Wales.
20. Wang J. Y. and Liu, C. R., 1998, A New Concept for Decoupling the Cutting Forces due to Flank Wear and Chip Formation in Hard Turning. Journal of Machining Science and Technology, Vol. 2, No. 1., pp. 77-90.
21. Nakayama, K., 1974, The Formation of Saw-toothed Chip in Metal Cutting, Proceedings of the International Conference on Production Engineering, 572-577, Tokyo.
22. Nakayama, K., Aral, M. and Kanda, T., 1988, Machining Characteristics of Hard Materials. Annals of the CIRP, 37(I):89-92.
23. Shaw, M. C. and Vyas, A., 1993, Chip Formation in the Machining of Hardened Steel. Annals of the CIRP, 41(I):29-33.
24. Liu C. R. and Mittal, S., 1995, Single-step Superfinishing Using Hard Machining Resulting in Superior Surface Integrity. Journal of Manufacturing Systems, 14(2):129-133.
25. Liu, C. R. and Mittal, S., 1996, Single-step Superfinish Hard Machining: Feasibility and Feasible Cutting Conditions. Robotics 6 Computer-Integrated Manufacturing, 12(I):15-27.