Progress in synthetic polymers based on natural amino acids

Journal of Macromolecular Science, Part A: Pure and Applied Chemistry

Volumn 48, Issue 8, 2011, Pages 644-679

  Mallakpour, Shadpour ^a   Dinari, Mohammad ^a  

^a ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

amino acids; biodegradable and biocompatible polymers; green chemistry conception; optically active materials

Indexed keywords

AMINO ACID RESIDUES; BIOCOMPATIBLE POLYMER; BUILDING BLOCKES; CATALYTIC FUNCTIONS; ELECTRON TRANSFER; GREEN CHEMISTRY CONCEPTION; HIGH MELTING POINT; INFORMATION TRANSFERS; LINEAR SEQUENCE; LIVING SYSTEMS; LOW MOLECULAR WEIGHT; NATURAL AMINO ACIDS; NATURALLY OCCURRING; NON-COVALENT INTERACTION; OPTICALLY ACTIVE COMPOUNDS; OPTICALLY ACTIVE MATERIALS; OPTICALLY ACTIVE SUBSTANCES; RESULTING MATERIALS; SYNTHETIC COMPOUNDS; SYNTHETIC MACROMOLECULES; SYNTHETIC POLYMERS; TUNABLE MATERIALS;

AMINO ACIDS; BIOCOMPATIBILITY; BIODEGRADATION; FUNCTIONAL GROUPS; GROWTH (MATERIALS); HYBRID SYSTEMS; MACROMOLECULES; MATERIALS PROPERTIES; NATURAL POLYMERS; ORGANIC SOLVENTS; PROTEINS; STEREOCHEMISTRY;

POLYMERS;

EID: 79960681276     PISSN: 10601325     EISSN: 15205738     Source Type: Journal    
DOI: 10.1080/15226514.2011.586289     Document Type: Article

References (320)

1. Wagner, I., andMusso, H. (1983) Angew. Chem. Int. Ed. Engl., 22, 816.
2. Easton, C.J. (1997) Chem. Rev., 97, 53.
3. Hey, D.H. and John, D.I., Eds. (1973) Amino acids, peptides and related compounds. Butterworths: London.
4. Wong, J.Y. and Bronzino, J.D.,Eds. (2007) Biomaterials,CRCPress, Taylor and Francis Group.
5. Lindblad, M., Liu, Y., Albertsson, A.C., Ranucci, E., and Karlsson, S. (2002) Advances in Polymer Science, Vol. 157, Degradable Aliphatic Polyesters, Springer-Verlage: Berlin, Heidelberg, p. 139-61.
6. Bi, H.P., Zhao, L., Liang, Y.M., and Li, C.J. (2009) Angew. Chem. Int. Ed. 48, 792.
7. Ottenheijm, H.C.J., and Herscheid, J.D.M. (1986) Chem. Rev., 86, 697.
8. Maruoka, K., and Ooi, T. (2003) Chem. Rev., 103, 3013.
9. Clapes, P., and Infante, M.R. (2002) Biocatal. Biotransform., 20, 215.
10. Martinez, V., Sanchez, L., Busquets, M.A., Infante, M.R., Vinardell, M.P., and Mitjans, M. (2007) Amino Acids, 33, 459.
11. Xia, J., Qian, J., and Nnanna, I.A. (1996) J. Agric. Food Chem., 44, 975.
12. Silva, B.F.B., Marques, E.F., and Olsson, U. (2008) Langmuir, 24, 10746.
13. Trabocchi, A., Scarpi, D., and Guarna, A. (2008) Amino Acids, 1, 34.
14. Oldfield, E. (2002) Annu. Rev. Phys. Chem., 53, 349.
15. Wathier, M., Johnson, C.S., Kim, T., and Grinstaff, M.W. (2006) Bioconjugate Chem., 17, 873.
16. Gigante, A., Chillemi, C., Bevilacqua, C., Greco, F., Bisaccia, F., and Tamburro, A.M. (2003) J. Mater. Sci. Mater. Med., 14, 717.
17. Pilkington-Miksa, M.A., Writer, M.J., Sarkar, S., Meng, Q. H., Barker, S.E., Shamlou, P.A., Hailes, H.C., Hart, S.L., and Tabor, A.B. (2007) Bioconjugate. Chem., 218, 1800.
18. Tosi, G., Costantino, L., Rivasi, F., Ruozi, B., Leo, E., Vergoni, A.V., Tacchi, R., Bertolini, A., Vandelli, M.A., and Forni, F. (2007) J. Control. Rel., 122, 1.
19. Brown, M.D.,Gray, A.I., Tetley, L., Santovena, A., Rene, J., Schatzlein, A.G., and Uchegbu, I. F. (2003) J. Control. Rel., 93, 193.
20. Billot, J.P., Douy, A., and Gallot, B. (1977) Makromol. Chem. 178, 1641.
21. Klok, H.A., and Lecommandoux, S. (2001) Adv. Mater., 13, 1217.
22. Breedveld, V., Nowak, A.P., Sato, J., Deming, T.J., and Pine, D. J. (2004) Macromolecules, 37, 3943.
23. Aiba, S., Minoura, N., Fujiwara, Y., Yamada, S., and Nakagawa, T. (1985) Biomaterials, 6, 290.
24. Kopecek, J. (1984) Biomaterials, 5, 19.
25. Spatola, A.F. (1983) Peptide backbone modifications. In chemistry and biochemistry of amino acids, peptides, and proteins. Weinstein, B., Ed.; Marcel Dekker: New York, p. 268-357.
26. Kumaki, T., Sisido, M., and Imanishi, Y. (1985) J. Biomed. Mater. Res., 19, 785.
27. Goodman, I., and Rhys, J.A. (1965) Polyesters. Elsevier: NewYork, Vol. I.
28. Metselaar, G.A., Hans, P.J.H.M., Nolte, R.J.M., Cornelissen, J.J.L.M., and Rowan, A.E. (2007) Chem. Eur. J., 13, 950.
29. Kros, A., Jesse, W., Metselaar, G.A., and Cornelissen, J.J.L.M. (2005) Angew. Chem. Int. Ed., 44, 4349.
30. Hill, D.J., Mio, M.J., Prince, R.B., Hughes, T.S., and Moore, J.S. (2001) Chem Rev., 101, 3893.
31. Amass, W., Amass, A., and Tighe, B. (1998) Polym. Int., 47, 89.
32. Ikada, Y., and Tsuji, H. (2000) Macromol. Rapid. Commun., 21, 117.
33. Painter, T.J. (1998) Carbohydr. Polym., 36, 335.
34. Audic, J.L., Fourcade, F., and Chaufer, B. (2007) Thermodynamics, solubility and environmental issues. Biodegradable material obtained from renewable resource. Letcher TM. (Editor). Chapter 20, p. 369-82.
35. Hench, L.L., and Ethridge, E.C. (1982) Biomaterials-an interfacial approach, in: A. Noordergraaf (Ed.), Biophysics and Bioengineering Series, Academic Press: New York.
36. Lyman,D.J. (1983)Polymers in medicine-An overview, E. Chiellini, P. Giusti (Eds.), Polymers in medicine. Biomedical and pharmacological applications, Plenum Press: New York, p. 215-18.
37. Anderson, J.M., Spilizewski, K.L.,Hiltner, A. (1985) Poly-a amino acids as biomedical polymers, in: D. F.Williams (Ed.), Biocompatibility of Tissue Analogs, CRC Press: Boca Raton, FL, Vol. 1, p. 67-88.
38. Bourke, S.L., and Kohn, J. (2003) Adv. Drug Delivery Rev., 55, 447.
39. Lescure, F., Gurny, R., Doelker, E., Pelaprat, M.L., Bichon, D., and Anderson, M. (1989) J. Biomed. Mater. Res., 23, 1299.
40. Fasman, G.D. (1987) Biopolymers, 26, S59.
41. Kemnitzer, J., and Kohn, J. (1997) Degradable polymers derived from the amino acid L-tyrosine, in: Domb, A.J.,Kost, J.,Wiseman, D.M.(Eds.), Drug targeting and delivery,Handbook of biodegradable polymers, Vol. 7, Harwood Academic: Amsterdam, p. 251.
42. Mancera, M., Roffe, I., Al-Kass, S.J., Rivas, M., and Galbis, J.A. (2003) Macromolecules, 36, 1089.
43. Okamura, A., Hirai, T., Tanihara, M., and Yamaoka, T. (2002) Polymer, 43, 3549.
44. Varela, O., and Orgueira, H.A. (1999) Adv. Carbohydr. Chem. Biochem., 55, 137.
45. Kiely, D.E., Chen, L., and Lin, T.H. (2000) J. Polym. Sci. Part A: Polym. Chem., 38, 594.
46. Garcia-Martin, M.G., Perez,R., Benito, E., andGalbis, J.A. (2001) Carbohydr. Res., 333, 95.
47. Puiggali, J., and Munoz-Guerra, S. (1986) Macromolecules, 19, 1119.
48. Obst, M., and Steinbuchel, A. (2004) Biomacromol., 5, 1166.
49. Bailey,W.J., Okamoto, Y., Kuo,W., and Narita, T. (1976) Proceeding 3rd International Biodegradation Symposium, Applied Scienc: London, p. 765.
50. Arvanitoyannis, I., Psomiadou, E., andYamamoto,N. (1995) Polymer, 36, 2957.
51. Katsarava, R., Kharadze, D., Kimerashvili, L., Medzmariashvili, N., Goguadze, T., and Tsilanadze, G. (1993) Makromol. Chem., 194, 143.
52. Wang, L., Wang, Y., and Cao, D. (2009) J. Macromol. Sci. Part A: Pure Appl. Chem., 46, 312.
53. Gachard, I., Bechaouch, S., Coutin, B., and Sekiguchi, H. (1997) Polym. Bull., 38, 427.
54. Mallakpour, S., and Kolahdoozan, M. (2006) Iran Polym. J., 15, 307.
55. Mallakpour, S.E., Hajipour, A.R., and Vahabi, R. (2001) Iran Polym. J., 10, 321.
56. Mallakpour, S., and Rafiemanzelat, F. (2005) Eur. Polym. J., 41, 2945.
57. Mallakpour, S., and Khani, M. (2007) Polym. Bull., 59, 587.
58. Mallakpour, S.E., Hajipour, A.R., and Roohipour-fard, R. (2000) Eur. Polym. J., 36, 2455.
59. Mallakpour, S., Hajipour, A.R., and Shahmohammadi, M.H. (2003) J. Appl. Polym. Sci., 89, 116.
60. Mallakpour, S.E., Hajipour, A.R., and Habibi, S. (2001) J. Appl. Polym. Sci., 80, 1312.
61. Mallakpour, S.E., Hajipour, A.R., and Habibi, S. (2001) Polym. Int., 50, 331.
62. Mallakpour, S.E., Hajipour, A.R., and Habibi, S. (2001) Eur. Polym. J., 37, 2435.
63. Mallakpour, S., and Shahmohammadi,M.H. (2004) J.Appl.Polym. Sci., 92, 951.
64. Mallakpour, S., and Shahmohammadi, M.H. (2005) Iran Polym. J., 14, 473.
65. Mallakpour, S.E., Hajipour, A.R., and Zamanlou, M.R. (2002) Eur. Polym. J., 38, 475.
66. Mallakpour, S.E., Hajipour, A.R., and Faghihi, K. (2001) Eur. Polym. J., 37, 119.
67. Mallakpour, S.E., Hajipour, A.R., and Zamanlou, M.R. (2001) J. Polym. Sci. Part A: Polym. Chem., 39, 177.
68. Mallakpour, S.E., Dabbagh, A.H., and Faghihi, K. (2000) Iran Polym. J., 9, 41.
69. Mallakpour, S., and Kowsari, E. (2006) Polym. Bull., 57, 169.
70. Mallakpour, S.E., Hajipour, A.R., and Khoee, S. (1999) Polym. Int., 48, 1133.
71. Mallakpour, S., and Moghadam, E. (2006) Polym. Bull. 56, 339.
72. Mallakpour, S.E., Hajipour,A.R., and Khoee, S. (2002) Eur.Polym. J., 38, 2011.
73. Monte, D., Galia,M., and Serra, A. (1997) J. Appl. Polym. Sci., 61, 2179.
74. Mallakpour, S., and Kowsari, E. (2004) J. Appl. Polym. Sci., 93, 2218.
75. Mallakpour, S.E., Hajipour, A.R., and Zamanlou, M.R. (2003) J. Polym. Sci. Part A: Polym. Chem., 41, 1077.
76. Mallakpour, S., and Kowsari, E. (2005) Polym. Adv. Technol., 16, 732.
77. Mallakpour, S., and Zamanlou, M.R. (2004) J. Appl. Polym. Sci., 91, 3281.
78. Mallakpour, S., and Kowsari, E. (2005) Iran Polym. J., 14, 81.
79. Kirk-Othmer, A. (1980) Encyclopedia of Chemical Technology, 3rd ed. John Wiley: New York 12, p. 692.
80. Faghihi, K., Zamani, K., and Mallakpour, S.E. (2002) Iran Polym. J., 11, 339.
81. Faghihi, K., Zamani, K., and Mallakpour, S.E. (2004) Iran Polym. J., 13, 93.
82. Faghihi, K., Zamani, K., Mirsamie, A., and Mallakpour, S.E. (2004) J. Appl. Polym. Sci., 91, 516.
83. Mallakpour, S., and Kowsari, E. (2005) Polym. Bull., 54, 147.
84. Mallakpour, S., and Kowsari, E. (2005) J. Polym. Sci. Part A: Polym. Chem., 43, 6545.
85. Mallakpour, S., and Kowsari, E. (2005) J. Appl. Polym. Sci., 96, 435.
86. Mallakpour, S., and Kowsari, E. (2006) J. Appl. Polym. Sci., 99, 1038.
87. Mallakpour, S., and Kowsari E.,(2006) Polym. Eng. Sci., 46, 558.
88. Mallakpour, S., and Rafiemanzelat, F. (2004) J. Appl. Polym. Sci., 93, 1647.
89. Mallakpour, S.E., Hajipour, A.R., and Vahabi, R. (2002) J. Appl. Polym. Sci., 84, 35.
90. Mallakpour, S., and Kolahdoozan, M. (2007) J. Appl. Polym. Sci., 104, 1248.
91. Mallakpour, S., and Kowsari, E. (2005) Polym. Bull., 53, 169.
92. Mallakpour, S., and Kowsari, E. (2003) J. Appl. Polym. Sci., 41, 3974.
93. Mallakpour, S., and Kowsari, E. (2004) J. Appl. Polym. Sci., 91, 2992.
94. Mallakpour, S., and Kowsari, E. (2005) Polym. Adv. Technol., 16, 466.
95. Mallakpour, S.E., Hajipour, A.R., Faghihi, K., Foroughifar, N., and Bagheri, J. (2001) J. Appl. Polym. Sci., 80, 2416.
96. Mallakpour, S., and Rafiemanzelat, F. (2005) React. Funct. Polym., 62, 153.
97. Mallakpour, S., and Rafiemanzelat, F. (2005) J. Appl. Polym. Sci., 98, 1781.
98. Mallakpour, S., and Rafiemanzelat, F. (2006) Iran Polym. J., 15, 79.
99. Mallakpour, S., and Rafiemanzelat, F. (2005) Iran Polym. J., 14, 909.
100. Mallakpour, S., and Rafiemanzelat, F. (2005) Iran Polym. J., 14, 169.
101. Mallakpour, S., Esteki, M., Rafiemanzelat, F., and Khayamian, T. (2007) Iran Polym. J., 16, 21.
102. Mallakpour, S., and Rafiemanzelat, F. (2007) Polym. Bull., 58, 339.
103. Mallakpour, S., Khani, M., and Rafiemanzelat, F. (2008) J. Appl. Polym. Sci., 108, 2975.
104. Mallakpour, S., and Khoee, S. (2004) J. Appl. Polym. Sci., 91, 2288.
105. Shastri, V.R., Hildgen, P.P., Langer, R.,Najajrah, Y., Ringe, I., and Domb, A.J. (1997) Other polyesters. Handbook of biodegradable polymers. CRC Press Taylor and FrancisGroup. Chapter 7. p. 1-16.
106. Bechaouch S., Coutin B., and Sekiguchi, H. (1996) Macromol. Chem. Phys., 197, 1661.
107. Pascual, S., Gachard, I., Coutin, B., and Sekiguchi, H. (2001) Macromol. Chem. Phys., 202, 873.
108. Armelin, E., Rodriguez-Galan, A., and Puigalli, J. (2001) Polymer, 42, 7923.
109. Paredes, N., Rodriguez-Galan, A., and Puigalli, J. (1998) J. Polym. Sci. Part A: Polym. Chem., 36, 1271.
110. Paredes, N., Casas,M.T., Puigalli, J., and Lotz, B. (1999) J. Polym. Sci. Part A: Polym. Chem., 37, 2511.
111. Paredes, N., Rodriguez-Galan, A., Puigalli, J., and Peraire, C. (1998) J. Appl. Polym. Sci., 69, 1537.
112. Rodriguez-Galan, A., Pelfort, M., Aceituno, J.E., and Puigalli, J. (1999) J. Appl. Polym. Sci., 74, 2312.
113. Suarez, N., Brocchini, S., and Kohn, J. (1998) Biomaterials, 19, 2347.
114. Jin, S., Mungara, P.M., Gonsalves, K.E. (1997) J. Polym. Sci. Part A: Polym. Chem., 35, 499.
115. Deng,X.,Yao, J.,Yuan, M.,Li, X., and Xiong,C. (2000) Macromol. Chem. Phys., 201, 2371.
116. Feng, Y., Klee, D., Keul, H., and Hocker, H. (2000) Macromol. Chem. Phys., 201, 2670.
117. Kihara, N., Makabe, K., and Endo, T. (1996) J. Polym. Sci. Part A: Polym. Chem., 34, 1819.
118. Fan, Y., Kobayashi, M., and Kise, H. (2002) J. Polym. Sci. Part A: Polym. Chem., 40, 385.
119. Fan, Y., Kobayashi, M., and Kise, H. (2001) J. Polym. Sci. Part A: Polym. Chem., 39, 1318.
120. Rodriguez-Gala, A., Pelfort, N.M., Aceituno, J.E., and Puiggali, J. (1999) J. Appl. Polym. Sci., 74, 2312.
121. Saotome,Y., Tashiro, M.,Miyazawa, T., and Endo, T. (1991) Chem. Lett., 20, 153.
122. Paredes, N., Rodriguez-Galan, A., Puiggali, J. (1996) Polymer, 31, 4175.
123. Paredes, N., Casas,M.T., Puiggali, J., and Lotz, B. (1999) J. Polym. Sci. Part B: Polym. Phys., 37, 2521.
124. Nagata, M. (1999) Macromol. Chem. Phys., 200, 2059.
125. Rodriguez-Galan, A., Fuentes, L. andPuiggalim, J. (2000) Polymer, 41, 5967.
126. Morgan, P.W. (1965) Condensation polymers: by interfacial and solution methods, Interscience: New York.
127. Asin, L., Armelin, E., Montani, J., Rodriguez-Galan, A., and Puiggali, J. (2001) J. Polym. Sci. Part A: Polym. Chem., 39, 4283.
128. Paredes, N., Rodriguez-Galan, A., Puiggali, J., and Peraire, C. (1998) J. Appl. Polym. Sci., 69, 1537.
129. Paredes, N., Rodriguez-Galan, A., and Puiggali, J. (1998) J. Polym. Sci. Part A: Polym. Chem., 36, 1271.
130. Puiggali, J., and Subirana, J.A. (2005) J. Peptide Sci., 11, 247.
131. Tsitlanadze, G., Machaidze, M.1., Kviria, T., Djavakhishvili1, N., Chu, C.C., and Katsarav, R. (2004) J. Biomater. Sci. Polymer Ed., 15, 1.
132. Koyama, E., Sanda, F., and Endo, T. (1997) J. Polym. Sci. Part A: Polym. Chem., 35, 2925.
133. Koyama, E., Sanda, F., and Endo, T. (1998) Macromolecules, 31, 1495.
134. Orikasa, Y., Nambu, Y.and Endo, T. (1992) Polym. Prepr. Jpn., 41, 2228.
135. Mallakpour, S.E., Hajipour, A.R., and Habibi, S. (2002) J. Appl. Polym. Sci., 86, 2211.
136. Mallakpour, S., and Habibi, S. (2003) Eur. Polym. J., 39, 1823.
137. Mallakpour, S.E., Hajipour, A.R., and Khoee, S. (2000) J. Appl. Polym. Sci., 77, 3003.
138. Mallakpour, S., and Kowsari, E. (2006) Polym. Adv. Technol., 17, 174.
139. Mallakpour, S., andMoghaddam, E. (2006) Iran Polym. J., 15, 547.
140. Mallakpour, S., and Kowsari, E. (2005) Polym. Adv. Technol., 16, 795.
141. Mallakpour, S.E., Hajipour, A.R., and Habibi, S. (2002) J. Appl. Polym. Sci., 85, 315.
142. Mallakpour, S.E., Hajipour, A.R., and Zamanlou, M.R. (2000) Polym. Int., 49, 1383.
143. Mallakpour, S., Tirgir, F., and Sabzalian, M.R. (2011) J. Polym. Res., 18, 373.
144. Mallakpour, S., and Asadi, P. (2010) Colloid. Polym. Sci., 288, 341.
145. Mallakpour, S., Asadi, P., and Sabzalian, M.R. (2011) AminoAcids, DOI: 10.1007/500726-010-0799-5.
146. Mallakpour, S., and Shahmohammadi, M. H. (2004) Polym. Int., 53, 184.
147. Nagai, A., Ishikawa, J., Kudo, H., and Endo, T. (2004) J. Polym. Sci. Part A: Polym. Chem., 42, 1143.
148. Mallakpour, S., Tirgir, F., and Sabzalian, M.R. (2010) J. Polym. Environ., 18, 685.
149. Tang, G., and He, B. (2006) J. Appl. Polym. Sci., 102, 46.
150. Feng, Y., Klee, D., and Hocker, H. (2002) J. Appl. Polym. Sci., 86, 2916.
151. Ait-Haddou, H., Leeder, S.M., and Gagni, M.R. (2004) Inorg. Chim. Acta., 357, 3854.
152. Nah, J. W., Yu, L., Han, S., Ahn, C. H., and Kim, S. W. (2002) J. Control. Rel., 78, 273.
153. Sinaga, A.,Hatton,T.A., andTam, K.C. (2007) Biomacromolecules, 8, 2801.
154. Kricheldorf, H.R., and Penczek, S, Eds. (1990) Models of biopolymers by ring-opening polymerization. CRC Press: Florida, FL; Chapter 1.
155. Deng, X., Liu, Y., and Yuanm, M. (2002) Eur. Polym. J., 38, 1435.
156. Liu, Y., Yuan, M., and Deng, X. (2003) Eur. Polym. J., 39, 977.
157. Zick, Y., Grunberger, G., Rees-Jones, R.W., and Comi, R.J. (1985) Eur. J. Biochem., 148, 177.
158. Cho, I., Kim, J.B., and Jung, H.J. (2003) Polymer, 44, 5497.
159. Sinaga, A., Ravi, P., Hatton, T.A., and Tam, K.C.,(2007) J. Polym. Sci. Part A: Polym. Chem., 45, 2646.
160. Yu, C., and Kohn, J. (1999) Biomaterials, 20, 253.
161. Yu, C., Mielewczyk, S.S., Breslauer, K.J., and Kohn, J. (1999) Biomaterials, 20, 265.
162. Ertel, S.I., and Kohn, J. (1994) J. Biomed. Mater. Res., 28, 919.
163. Mezo G., Remenyi, J., Kajtarb, J., Barnac, K., Gaalc, D., and Hudecz, F. (2000) J. Control. Rel., 63, 81.
164. Clegg, J.A., Hudecz, F., Pimm, M.V., and Baldwin, R.W. (1990) Bioconjugate, Chem., 2, 425.
165. Hudecz, F., Kurucz, I., Lanyi, A., Gaal, D., Kovacs, A.L., Mezo, U.G., Rajnavolgyi, E., and Szekerke, M. (1990) J. Control. Rel., 219, 231.
166. Torma, V., Gyenes1, T., Szakacs, Z., Noszal, B., Nemethy, A., and Zrinyi, M. (2007) Polym. Bull., 59, 311.
167. Padmaja, T., Lele, B.S., Deshpande, M.C., and Kulkarni, M. G. (2002) J. Appl. Polym. Sci., 85, 2108.
168. Bae, Y., and Kataoka, K. (2009) Adv. Drug Delivery Rev., 61, 768.
169. Kopecek, J., and Yang, J. (2009) Acta Biomaterialia, 5, 805.
170. Hartwig, S., and Hecht, S. (2010) Macromolecules, 43, 242.
171. Mori, H., and Okabayashi, S. (2009) React. Funct. Polym., 69, 441.
172. Klok, H.A. (2009) Macromolecules, 42, 7990.
173. Masuda, T. (2007) J. Polym. Sci. Part A: Polym. Chem., 45, 165.
174. Lam, J.W.Y., and Tang, B.Z. (2005) Acc. Chem. Res., 38, 745.
175. Yashima, E., and Maeda, K. (2008) Macromolecules, 41, 3.
176. Maeda, K., Goto, H., and Yashima, E. (2001) Macromolecules, 34, 1160.
177. Yashima, E., Maeda, K., and Nishimura, T. (2004) Chem. Eur. J., 10, 42.
178. Sanda, F., and Endo, T. (1999) Macromol. Chem. Phys., 200, 2651.
179. Gao, G., Sanda, F., and Masuda, T. (2003) Macromolecules, 36, 3938.
180. Sanda, F., Araki, H., and Masuda, T. (2004) Macromolecules, 37, 8510.
181. Zhao, H., Sanda, F.and Masuda, T. (2004) Macromolecules, 37, 8893.
182. Zhao, H., Sanda, F., and Masuda, T. (2004) Macromolecules, 37, 8888.
183. Sanda, F., GaoG.and Masuda, T. (2004) Macromol. Biosci., 4, 570.
184. Cheuk, K.K.L., Lam, J.W. Y., Chen, J., Lai, L.M., and Tang, B.Z. (2003) Macromolecules, 36, 5947.
185. Sakurai, S., Okoshi,K.,Kumaki, J., andYashima, E. (2006) Angew. Chem. Int. Ed., 45, 1245.
186. Li, B.S., Kang, S.Z., Cheuk, K.K.L., Wan, L.J., Ling, L., Bai, C., and Tang, B. Z. (2004) Langmuir, 20, 7598.
187. Li, B.S., Kang, K.L.L., Chen, J., Xiao, X., Bai, C., and Tang, B.Z. (2003) Macromolecules, 36, 77.
188. Kang, K.L.L., Lam, J.W.Y., Lai, L.M., Dong, Y., and Tang, B.Z. (2003) Macromolecules, 36, 9752.
189. Sanda, F., Terada, K., andMasuda, T. (2005) Macromolecules, 38, 8149.
190. Qu, J., Suzuki, Y., Shiotsuki,M., Sanda, F., andMasuda, T. (2007) Polymer, 48, 6491.
191. Gao, G., Sanda, F., and Masuda, T. (2003) Macromolecules, 36, 3932.
192. Qu, J., Sanda, F., and Masuda, T. (2009) Eur. Polym. J., 45, 448.
193. Zhao, H., Sanda, F., and Masuda, T. (2007) J. Polym. Sci. Part A: Polym. Chem., 45, 253.
194. Erwin, A.R., Sanda, F., and Masuda, T. (2004) Polym. Bull., 52, 93.
195. Erwin, A.R., Sanda, F., and Masuda, T. (2006) J. Polym. Sci. Part A: Polym. Chem., 44, 810.
196. Griffiths, J. (1972) Chem, Soc, Rev., 1, 481.
197. Natansohn, A. Ed (1999) Macromolecular Symposia (azobenzenecontaining materials); Wiley-VCH: Weinheim, 139.
198. Natansohn, A., and Rochon, P. Eds,(1997) Azobenzene-containing polymers: digital and holographic storage; ACS Symposium Series 672; American Chemical Society: Washington, DC, p. 236.
199. Sanda, F., Teraura T., andMasuda, T. (2004) J. Polym. Sci. Part A: Polym. Chem., 42, 4641.
200. Sanda, F., Kawano, T., and Masuda, T. (2005) Polym. Bull., 55, 341.
201. Nomura, R., Tabei, J., and Masuda, T. (2001) J. Am. Chem. Soc., 123, 8430.
202. Sanda, F., Araki, H.and Masuda, T. (2005) Chem. Lett., 34, 1642.
203. Kudo, H., Sanda, F., and Endo, T. (1999) Macromolecules, 32, 8370.
204. Zhao, H., Sanda, F., and Masuda, T. (2007) J. Polym. Sci. Part A: Polym. Chem., 45, 1691.
205. Lai, L.M., Lam, J.W.Y., and Tang, B.Z. (2006) J. Polym. Sci. Part A: Polym. Chem., 44, 2117.
206. Chan, K.H.Y., Lam, J.W.Y.,Wong, K.M.C., Tang, B. Z., and Yam, V.W.W. (2009) Chem. Eur. J., 15, 2328.
207. Chen, R., Khormaee, S., Eccleston, M.E., and Slater, N.K.H. (2009) Biomaterials, 30, 1954.
208. Chen, R., Eccleston, M.E., Yue Z., and Slater, N.K.H. (2009) J. Mater. Chem., 19, 4217.
209. Mallakpour, S., and Dinari, M. (2008) Polym. Adv. Technol., 19, 1334.
210. Mallakpour, S., and Taghavi, M. (2008) Eur. Polym. J., 44, 87.
211. Mallakpour, S., and Sepehri, S. (2008) Desig. Monom. Polym., 11, 535.
212. Mallakpour, S., and Dinari, M. (2009) J. Appl. Polym. Sci., 112, 244.
213. Mallakpour, S., and Sepehri, S. (2008) React. Funct. Polym., 68, 1459.
214. Mallakpour, S., and Taghavi, M. (2008) J. Appl. Polym. Sci., 109, 3603.
215. Mallakpour, S., and Seyedjamali, H. (2008) Eur.Polym. J., 44, 3615.
216. Mallakpour, S., and Kolahdoozan,M. (2008) React. Func. Polym., 68, 91.
217. Mallakpour, S., and Kolahdoozan, M. (2008) Iran Polym. J., 531, 17.
218. Mallakpour, S., and Rafiee, Z. (2008) Polym. Degrad. Stab., 93, 753.
219. Mallakpour, S., and Meratian, S. (2009) J. Appl. Polym. Sci., 111, 1209.
220. Mallakpour, S., and Seyedjamali, H. (2009) Polym, Bull., 62, 605.
221. Mallakpour, S., and Taghavi, M. (2009) React. Funct. Polym., 69, 206.
222. Mallakpour, S., and Rafiee, Z. (2009) Reac. Funct. Polym., 69, 252.
223. Mallakpour, S., and Taghavi, M. (2008) Polymer, 49, 3239.
224. Mallakpour, S., and Dinari, M. (2009) Polym. Bull., 63, 623.
225. Mallakpour, S., and Rafiee, Z. (2008) Polymer, 49, 3007.
226. Mallakpour, S., and Rafiee, Z. (2009) Macromol. Res., 17, 901.
227. Mallakpour, S., and Dinari, M. (2010) Macromol. Res., 18, 129.
228. Mallakpour, S., and Dinari, M. (2010) Desig. Monom. Polym., 13, 51.
229. Snell C.R., and Fasman, G.D. (1973) Biochemistry, 12, 1017.
230. Sridhara, S., Ananthanarayanan, V.S., Taylor, G.T., and Scheraga, H.A. (1977) Biopolymers, 16, 2565.
231. Padmanabhan, S., Marqusee, S., Ridgeway, T., Laue, T.M., and Baldwin, R.L. (1990) Nature, 344, 268.
232. Chakrabartty, A., Doig, A.J., and Baldwin, R.L. (1993) Proc. Natl. Acad. Sci. USA, 90, 11332.
233. Snell, C.R., and Fasman, G.D. (1972) Biopolymers, 11, 1723.
234. Chou, P.Y., Wells, M., and Fasman, G.D. (1972) Biochemistry, 11, 3028.
235. Alter, J.E., Taylor, G.T., and Scheraga, H.A. (1972) Macromolecules, 5, 739.
236. Shoji, A., Ozaki, T., Fujito, T., Deguchi, K., and Ando, I. (1987) Macromolecules, 20, 2441.
237. Lavigne, P., Tancrede, P., Lamarche, F., and Max, J.J. (1988) Langmuir, 8, 1992.
238. Kuroyanagi, Y., Aoki, N., Nakakita, N., Ishihara, S., Chang, C.H., and Shioya, N. (1990) Nessho, 16, 59.
239. Banfi, S., Colonna, S., Molinari, H., Julia, S., and Guixer, J. (1984) Tetrahedron, 140, 5207.
240. Sanda, F., Nakamura, M., Endo, T., Takata, T., and Handa, H. (1994) Macromolecules, 27, 7928.
241. Sanda, F., Abe, T., and Endo, T. (1997) J. Polym. Sci. Part A: Polym. Chem., 35, 2619.
242. Feng, L., Hu, J., Liu, Z., Zhao, F., and Liu, G. (2007) Polymer, 48, 3616.
243. Nishihara, K., Suzuoka, A., and Sakota, N. (1973) J. Polym. Sci. Polym. Chem. Ed., 11, 2315.
244. Nishihara, K., and Sakota, N. (1973) J. Polym. Sci. Polym. Chem. Ed., 11, 3171.
245. Morcellet-Sauvage, J., Morcellet, M., and Loucheux, C. (1981) Makromol. Chem., 182, 949.
246. Morcellet, J., Loucheux, C.and Daoust, H. (1982) Macromolecules, 15, 890.
247. Lekchiri, A., Morcellet, J., and Morcellet, M. (1987) Macromolecules, 20, 49.
248. Methenitis, C., Morcellet, J., and Morcellet, M. (1987) Eur. Polym. J., 23, 287.
249. Methenitis, C., Morcellet, J., Pneumatikakis,G., and Morcellet, M. (1994) Macromolecules, 27, 1455.
250. Bush, S. M., and North, M. (1996) Polymer, 37, 4649.
251. Murata, H., Sanda, F., and Endo, T. (1996) Macromolecules, 29, 5535.
252. Murata, H., Sanda, F., and Endo, T. (1997) Macromolecules, 30, 2902.
253. Sanda, F., Ogawa, F.and Endo, T. (1998) Polymer, 39, 5543.
254. Vortisch, V., Kroneck, P., and Hemmerich, P. (1976) J. Am. Chem. Soc., 98, 2821.
255. Gregus, Z., Stein, A.F.,Varga, F., and Klassen,C.D. (1992) Toxicol. Appl. Pharmacol., 114, 88.
256. Shukla, J.S., and Singh, K. (1979) J. Polym. Sci. Polym. Ed., 17, 531.
257. Sato, T., Terada,K.,Yamauchi, J., and Okaya, T. (1993) Makromol. Chem., 194, 163.
258. Okaya, T., Kikuchi, K., and Mori, Y. (1997) Macromol. Chem. Phys., 198, 2027.
259. Keillor, J.W., Neverov, A.A., and Brown, R.S. (1994) J. Am. Chem. Soc., 116, 4669.
260. Wulff,G., Zabrocki, K., and Hohn, J. (1978) Angew. Chem. Int. Ed. Engl., 17, 535.
261. Wulff, G., and Schulze, I. (1978) Angew. Chem. Int. Ed. Engl., 17, 537.
262. Yamguchi, K., Kato, T., Hirao, A., and Nakahama, S. (1981) Makromol. Chem. Rapid. Commun., 2, 595.
263. Kihara, N., Kannno, C., and Fukutomi, T. (1997) J. Polym. Sci. Part A: Polym. Chem., 35, 1443.
264. Erickson, B.W., and Merrifield, R.B. (1972) J. Am. Chem. Soc., 94, 5456.
265. Alberico, F., Grandas, A., Pota, A., Pedroso, E., and Giralt, E. (1987) Synthesis, 3, 271.
266. Kudo, H., Sanda, F., and Endo, T. (1999) Macromol. Chem. Phys., 200, 1232.
267. Uhrich, K.E., Cannizzaro, S.M., Langer, R.S., and Shakesheff, K.M. (1999) Chem. Rev., 99, 3181.
268. Dang, W., Daviau, T., Ying, P., Zhao, Y., Nowotnik, D., Clow, C. S., Tyler, B., and Brem, H. (1996) J. Control. Rel., 42, 83.
269. Uhrich, K.E.,Thomas,T.T.,Laurencin,C.T., andLanger, R. (1997) J. Appl. Polym. Sci., 63, 1401.
270. Uhrich, K.E.,Larrier,D.R., Laurencin,C.T., and Langer,R. (1996) J. Polym. Sci. Part A: Polym. Chem., 34, 1261.
271. Uhrich, K.E., and Subr, V. (2004) Adv. Drug. Delivery Rev., 56, 1023.
272. Domb, A.J, Amselem, S, Shah, J, Maniar, M. (1992) Poly(anhydrides): Synthesis and characterization, Advances in Polymer Science: Peppas, N.A. and Langer, R. (Ed.), Springer-Verlag, p. 93.
273. Laurencin,C.T., Ibim, S.E.M.,Langer, R. (1995)Poly(anhydrides). Biomedical applications of synthetic biodegradable polymers. Hollinger, J.O. (Ed.) CRC Press: Boca Raton, p. 59.
274. Leong, K.V.V., Domb, R. (1989) Poly(anhydrides). Encyclopedia of Polymer Science and Engineering, 2nd ed., Wiley and Son: New York.
275. Dumb, A.J. (1990) Biomatmals, 11, 686.
276. Hartmann, M., and Schultz, V. (1989) Macroml. Chem., 190, 2133.
277. Staubli, A., Ron, E., and Langer, R. (1990) J. Am. Chem. Soc., 112, 4419.
278. Staubli, A., Mathiowitz, E., Lucarelli, M., Langer, R. (1991) Macromolecules, 24, 2283.
279. Domb, A.J., Kost, J. and Wiseman, D.M. Edit. (1997) Polyanhydrides. Handbook of biodegradable polymers. Chapter 8. CRC Press, Taylor and Francis Group, p. 1-16.
280. Zhang, Z.Q., Su, X.M., He, H.P.and Qu, F.Q. (2004) J. Polym. Sci. Part A: Polym. Chem., 42, 4311.
281. Ibim, S.E.M., Uhrich, K.E., Attawia, M., Shastri, V.R., El-Amin, S.F., Bronson, R.L., and Laurencin, C.T. (1998) J. Biomed. Mater. Res., 43, 374.
282. Cheng, G., Aponte, M. A., and Ramirez, C. A. (2004) Polymer, 45, 3157.
283. Mallakpour, S., and Kolahdoozan, M. (2007) Eur. Polym. J., 43, 3344.
284. Mallakpour, S., and Seyedjamali, H. (2008) Amino Acids, 34, 531.
285. Mallakpour, S., and Rafiee, Z. (2007) Polymer J., 39, 1185.
286. Mallakpour, S., and Sepehri, S. (2008) J. Appl. Polym. Sci., 110, 2942.
287. Mallakpour, S., and Tirgir, F. (2009) e-Polymers, 108, 1.
288. Vandorpe J., Schacht E., Dejardin S., and Lemmouchi, Y. (1997) Biodegradable polyphosphazenes for biomedical application, Handbook of Biodegradable Polymers, CRC Press, Taylor and Francis Group, Chapter 9.
289. Allcock, H. R. (2003) Chemistry and Applications of Polyphosphazenes. Wiley-Interscience: Hoboken, NJ.
290. Allcock, H.R., Pucher, S. R., and Scopelianos, A.G. (1994) Macromolecules, 27, 1071.
291. Crommen, J., Vandorpe, J., and Schacht, E. (1993) J. Control. Rel., 24, 167.
292. Allcock, H.R.,Fuller,T.J.,Mack,D.P.,Matsuinura, K., and Smiltz, K.M. (1977) Macromolecules, 10, 824.
293. Allcock, H.R., Pucher, S.R., and Scopelianos, A. G. (1994) Biomateriales, 15, 563.
294. Crommen, J.H.L., Schacht, E.H.and Mense, E.H.G. (1992) Biomateriales, 13, 511.
295. Crommen, J.H.L., Schacht, E.H., and Mense, E.H.G. (1992) Biomateriales, 13, 601.
296. Crommen, J.H.L., Vandorpe, E.H.J., and Schacht, E.H. (1993) J. Control. Rel., 24, 167.
297. Ruiz, E.M., Ramirez, C.A., Aponte, M.A., and Barbosa-Canovas, G.V. (1993) Biomatmials, 14, 491.
298. Goeclemoed, J.H., and de Groot, K. (1988) Makromol. Chem. Macromol. Symp., 19, 341.
299. Allcock, H.R., Austin, P.E., and Neenan, T.X. (1982) Macromolecules, 15, 689.
300. Allcock, H.R., Neenan, T.X., and Kossa, V.C. (1982) Macromolecules, 15, 6693.
301. Allcock, H.R., Pucher, S.R., and Scopelianos, A.G. (1994) Biomaterials, 15, 563.
302. Goeclemoed, J., de Groot, K., Claessen, A.M.E., and Scheper, R.J. (1991) J. Control. Rel., 17, 235.
303. Laurencin, C.T., Koh, H.J., Xeenan, T.X., UIcock, H.R., and Langer, R. (1987) J. Biomed. Mater. Res., 21, 1231.
304. Higuchi, T. (1963) J. Pharm. Sci., 52, 1145.
305. Caliceti, P., Lora, S.,Marsilio, F., Guiotto, A., and Veronese, F.M. (1994) Farmaco, 49, 69.
306. Grolleman, C.W.J., de Visser, A.C., Wolke, J.G.C., Klein, C.P.A., der Groot, H., and Timmerma, H. (1986) J. Control. Rel., 4, 133.
307. Allcock, H.R., and Fuller, T.J. (1980) Macromolecules, 13, 1338.
308. Allcock, H.R., Singh, A., Ambrosio, A.M.A., and Laredo, W.R. (2003) Biomacromolecules, 4, 1646.
309. Krogman, N.R., Weikel A.L., Nguyen N.Q., Nair L.S., Laurencin C.T., and Allcock, H. R. (2008) Macromolecules, 41, 7824.
310. Biagini, S.C.G., Coles, M.P., Gibson, V.C., Giles, M.R., Marshall, E.L., and North, M. (1998) Polymer, 39, 1007.
311. Kiessling, L.L., and Owen, R.M. (2003) In Handbook of Metathesis; Grubbs, R.H., Ed; Wiley-VCH: Weinheim, Chapter 3, p. 3.
312. Sutthasupa, S., Terada, K., Sanda, F., and Masuda, T. (2006) J. Polym. Sci., Part A: Polym. Chem., 44, 5337.
313. Sutthasupa, S., Sanda, F., andMasuda, T. (2008) Macromol. Chem. Phys., 209, 930.
314. Sutthasupa, S., Sanda, F., andMasuda, T. (2009) Macromolecules, 42, 1519.
315. Maynard, H.D., Okada, S.Y., and Grubbs, R.H,(2000) Macromolecules, 33, 6239.
316. Maynard, H.D., Okada, S.Y., and Grubbs, R.H. (2001) J. Am. Chem. Soc., 123, 1275.
317. Coles, M.P., Gibson, V.C., Mazzariol, L., North, M., Teasdale, W.G.,Williams,C.M., and Zamuner,D. (1994) J. Chem. Soc.Chem. Commun., 2505.
318. Biagini, S.C.G.,Davies, R.G.,Gibson, V.C.,Giles, M.R.,Marshall, E.L., and North, M. (2001) Polymer, 42, 6669.
319. Biagini, S.C.G., Davies, R.G., Gibson, V.C., Giles, M.R., Marshall, E.L., North,M., and Robson, D.A. (1999) Chem. Commun., 235.
320. Biagini, S.C.G.,Davies, R.G.,Gibson, V.C.,Giles, M.R.,Marshall, E.L., and North, M. (2008) J. Polym. Sci. Part A: Polym. Chem., 46, 7985.