Protocols for the optimal design of multi-functional cellular structures: From hypersonics to micro-architected materials

Journal of the American Ceramic Society

Volumn 94, Issue SUPPL. 1, 2011, Pages s15-s34

  Valdevit, Lorenzo ^a   Jacobsen, Alan J ^b   Greer, Julia R ^c   Carter, William B ^b  

^a University of California at Irvine   (United States)

^b Hughes Aircraft Co   (United States)

^c California Institute of Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

HYPERSONIC VEHICLES; NANOTECHNOLOGY; OPTIMAL SYSTEMS; STOCHASTIC SYSTEMS;

CELLULAR STRUCTURE; GEOMETRY OPTIMIZATION; MACROSCOPIC DIMENSIONS; MULTI-FUNCTIONAL STRUCTURES; OPTIMIZATION STRATEGY; PERFORMANCE BENEFITS; PERIODIC CELLULAR MATERIALS; SPECIFIC STIFFNESS AND STRENGTHS;

STRUCTURAL DESIGN;

EID: 79960022958     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2011.04599.x     Document Type: Article

References (160)

1. L. J. Gibson, and, M. F. Ashby, Cellular Solids: Structure and Properties. Cambridge University Press, Cambridge, UK, 1999.
2. M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson, and, H. N. G. Wadley, Metal Foams: A Design Guide. Butterworth-Heinemann, Oxford, UK, 2000.
3. T. J. Lu, L. Valdevit, and, A. G. Evans, " Active Cooling by Metallic Sandwich Structures With Periodic Cores," Prog. Mater. Sci., 50 [ 7 ] 789-815 (2005). (Pubitemid 40819674)
4. A. G. Evans, J. W. Hutchinson, N. A. Fleck, M. F. Ashby, and, H. N. G. Wadley, " The Topological Design of Multifunctional Cellular Metals," Prog. Mater. Sci., 46 [ 3-4 ] 309-27 (2001).
5. H. N. G. Wadley, " Cellular Metals Manufacturing," Adv. Eng. Mater., 4 [ 10 ] 726-33 (2002).
6. H. N. G. Wadley, N. A. Fleck, and, A. G. Evans, " Fabrication and Structural Performance of Periodic Cellular Metal Sandwich Structures," Compos. Sci. Technol., 63 [ 16 ] 2331-43 (2003). (Pubitemid 37365657)
7. H. Bart-Smith, A. F. Bastawros, D. R. Mumm, A. G. Evans, D. J. Sypeck, and, H. N. G. Wadley, " Compressive Deformation and Yielding Mechanisms in Cellular Al Alloys Determined Using X-ray Tomography and Surface Strain Mapping," Acta Mater., 46 [ 10 ] 3583-92 (1998). (Pubitemid 128427555)
8. H. Bart-Smith, J. W. Hutchinson, and, A. G. Evans, " Measurement and Analysis of the Structural Performance of Cellular Metal Sandwich Construction," Int. J. Mech. Sci., 43 [ 8 ] 1945-63 (2001). (Pubitemid 32544292)
9. A. F. Bastawros, H. Bart-Smith, and, A. G. Evans, " Experimental Analysis of Deformation Mechanisms in a Closed-Cell Aluminum Alloy Foam," J. Mech. Phys. Solids, 48 [ 2 ] 301-22 (2000). (Pubitemid 30541867)
10. H. Bart-Smith, J. W. Hutchinson, N. A. Fleck, and, A. G. Evans, " Influence of Imperfections on the Performance of Metal Foam Core Sandwich Panels," Int. J. Solids Struct., 39 [ 19 ] 4999-5012 (2002). (Pubitemid 35151393)
11. N. Wicks, and, J. W. Hutchinson, " Optimal Truss Plates," Int. J. Solids Struct., 38 [ 30-31 ] 5165-83 (2001). (Pubitemid 32575724)
12. L. Valdevit, J. W. Hutchinson, and, A. G. Evans, " Structurally Optimized Sandwich Panels With Prismatic Cores," Int. J. Solids Struct., 41 [ 18-19 ] 5105-24 (2004).
13. L. Valdevit, Z. Wei, C. Mercer, F. W. Zok, and, A. G. Evans, " Structural Performance of Near-Optimal Sandwich Panels With Corrugated Cores," Int. J. Solids Struct., 43 [ 16 ] 4888-905 (2006). (Pubitemid 43866732)
14. N. Wicks, and, J. W. Hutchinson, " Performance of Sandwich Plates With Truss Cores," Mech. Mater., 36 [ 8 ] 739-51 (2004).
15. F. W. Zok, H. Rathbun, M. He, E. Ferri, C. Mercer, R. M. McMeeking, and, A. G. Evans, " Structural Performance of Metallic Sandwich Panels With Square Honeycomb Cores," Philos. Mag., 85 [ 26-27 ] 3207-34 (2005). (Pubitemid 43203879)
16. F. W. Zok, H. J. Rathbun, Z. Wei, and, A. G. Evans, " Design of Metallic Textile Core Sandwich Panels," Int. J. Solids Struct., 40 [ 21 ] 5707-22 (2003). (Pubitemid 37111320)
17. F. W. Zok, S. A. Waltner, Z. Wei, H. J. Rathbun, R. M. McMeeking, and, A. G. Evans, " A protocol for Characterizing the Structural Performance of Metallic Sandwich Panels: Application to Pyramidal Truss Cores," Int. J. Solids Struct., 41 [ 22-23 ] 6249-71 (2004).
18. L. Valdevit, A. Pantano, H. A. Stone, and, A. G. Evans, " Optimal Active Cooling Performance of Metallic Sandwich Panels With Prismatic Cores," Int. J. Heat Mass Transfer, 49 [ 21-22 ] 3819-30 (2006). (Pubitemid 44093525)
19. L. Valdevit, N. Vermaak, F. W. Zok, and, A. G. Evans, " A Materials Selection Protocol for Lightweight Actively Cooled Panels," J. Appl. Mech., 75, 061022 (2008).
20. N. Vermaak, L. Valdevit, and, A. G. Evans, " Influence of Configuration on Materials Selection for Actively Cooled Combustors," J. Propul. Power, 26 [ 2 ] 295-302 (2010).
21. N. Vermaak, L. Valdevit, and, A. G. Evans, " Materials Property Profiles for Actively Cooled Panels: An Illustration for Scramjet Applications," Metall. Mater. Trans. A., 40A [ 4 ] 877-90 (2009).
22. C. S. Roper, " Multiobjective Optimization for Design of Multifunctional Sandwich Panel Heat Pipes With Micro-Architected Truss Cores," Int. J. Heat Fluid Flow, 32, 239-48 (2011).
23. H. J. Rathbun, D. D. Radford, Z. Xue, M. Y. He, J. Yang, V. Deshpande, N. A. Fleck, J. W. Hutchinson, F. W. Zok, and, A. G. Evans, " Performance of Metallic Honeycomb-Core Sandwich Beams Under Shock Loading," Int. J. Solids Struct., 43 [ 6 ] 1746-63 (2006). (Pubitemid 43152347)
24. M. T. Tilbrook, V. S. Deshpande, and, N. A. Fleck, " The Impulsive Response of Sandwich Beams: Analytical and Numerical Investigation of Regimes of Behaviour," J. Mech. Phys. Solids, 54 [ 11 ] 2242-80 (2006). (Pubitemid 44556727)
25. H. N. G. Wadley, K. P. Dharmasena, M. Y. He, R. M. McMeeking, A. G. Evans, T. Bui-Thanh, and, R. Radovitzky, " An active Concept for Limiting Injuries Caused by Air Blasts," Int. J. Impact Eng., 37 [ 3 ] 317-23 (2010).
26. Z. Y. Xue, and, J. W. Hutchinson, " Crush Dynamics of Square Honeycomb Sandwich Cores," Int. J. Numer. Meth. Eng., 65 [ 13 ] 2221-45 (2006).
27. L. H. Han, T. J. Lu, and, A. G. Evans, " Optimal Design of a Novel High Authority SMA Actuator," Mech. Adv. Mater. Struct., 12 [ 3 ] 217-27 (2005). (Pubitemid 41673167)
28. R. G. Hutchinson, N. Wicks, A. G. Evans, N. A. Fleck, and, J. W. Hutchinson, " Kagorne Plate Structures for Actuation," Int. J. Solids Struct., 40 [ 25 ] 6969-80 (2003).
29. T. J. Lu, J. W. Hutchinson, and, A. G. Evans, " Optimal Design of a Flexural Actuator," J. Mech. Phys. Solids, 49 [ 9 ] 2071-93 (2001). (Pubitemid 32768104)
30. S. Lucato, J. Wang, P. Maxwell, R. M. McMeeking, and, A. G. Evans, " Design and Demonstration of a High Authority Shape Morphing Structure," Int. J. Solids Struct., 41 [ 13 ] 3521-43 (2004). (Pubitemid 38571165)
31. N. Wicks, and, J. W. Hutchinson, " Sandwich Plates Actuated by a Kagome Planar Truss," J. Appl. Mech.-Trans. Asme, 71 [ 5 ] 652-62 (2004). (Pubitemid 40122559)
32. W. D. Macdonald, and, T. W. Eagar, " Transient Liquid-Phase Bonding," Annu. Rev. Mater. Sci, 22, 23-46 (1992).
33. Wall-Colmonoy Corporation. Available at
34. D. T. Queheillalt, and, H. N. G. Wadley, " Titanium alloy Lattice Truss Structures," Mater. Des., 30 [ 6 ] 1966-75 (2009).
35. S. J. Johnson, B. Tryon, and, T. M. Pollock, " Post-Fabrication Vapor Phase Strengthening of Nickel-Based Sheet Alloys for Thermostructural Panels," Acta Mater., 56 [ 17 ] 4577-84 (2008).
36. S. W. Godfrey, " Optimal Design of Orthotropic Fiber-Composite Corrugated-Core Sandwich Panels Under Axial Compression"; MS Thesis, Mechanical and Aerospace Engineering, University of California, Irvine, (2010).
37. B. P. Russell, V. S. Deshpande, and, H. N. G. Wadley, " Quasi-Static Deformation and Failure Modes of Composite Square Honeycombs," J. Mech. Mater. Struct., 3 [ 7 ] 1315-40 (2008).
38. A. P. Mouritz, and, B. N. Cox, " A Mechanistic Interpretation of the Comparative In-Plane Mechanical Properties of 3D Woven, Stitched and Pinned Composites," Compos. Part A-Appl. S., 41 [ 6 ] 709-28 (2001).
39. V. S. Deshpande, N. A. Fleck, and, M. F. Ashby, " Effective Properties of the Octet-Truss Lattice Material," J. Mech. Phys. Solids, 49 [ 8 ] 1747-69 (2001). (Pubitemid 32645564)
40. N. Vermaak, " Thermostructural Design Tools for Hypersonic Vehicles," Ph.D. Thesis, Materials Department, University of California, Santa Barbara, 2010.
41. D. Queheillalt, and, H. Wadley, " Cellular Metal Lattices With Hollow Trusses," Acta Mater., 53 [ 2 ] 303-13 (2005).
42. Q. Li, E. Y. Chen, D. R. Bice, and, D. C. Dunand, " Mechanical Properties of Cast Ti-6Al-2Sn-4Zr-2Mo Lattice Block Structures," Adv. Eng. Mater., 10 [ 10 ] 939-42 (2008).
43. F. P. W. Melchels, J. Feijen, and, D. W. Grijpma, " A Review on Stereolithography and its Applications in Biomedical Engineering," Biomaterials, 31 [ 24 ] 6121-30 (2010).
44. H.-B. Sun, and, S. Kawata, " Two-Photon Photopolymerization and 3D Lithographic Microfabrication," pp. 169-273 in NMR, 3D Analysis, Photopolymerization, Vol. 190. Edited by, N. Fatkullin,. Springer, Berlin, Germany, 2004.
45. A. J. Jacobsen, W. Barvosa-Carter, and, S. Nutt, " Micro-Scale Truss Structures Formed From Self-Propagating Photopolymer Waveguides," Adv. Mater., 19 [ 22 ] 3892-6 (2007). (Pubitemid 350190433)
46. A. J. Jacobsen, J. A. Kolodziejska, R. Doty, K. D. Fink, C. Zhou, C. S. Roper, and, W. B. Carter, " Interconnected Self-Propagating Photopolymer Waveguides: An Alternative to Stereolithography for Rapid Formation of Lattice-Based Open-Cellular Materials " in Twenty First Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference, University of Texas, Austin (2010).
47. J. Banhart, " Manufacture, Characterisation and Application of Cellular Metals and Metal Foams," Prog. Mater. Sci., 46, 559-632 (2001). (Pubitemid 32876889)
48. M. Scheffler, and, P. Colombo, " Cellular Ceramics: Structure, Manufacturing, Properties and Applications. WILEY, Weinheim, 2005.
49. A. G. Evans, M. Y. He, V. S. Deshpande, J. W. Hutchinson, A. J. Jacobsen, and, W. B. Carter, " Concepts for Enhanced Energy Absorption Using Hollow Micro-Lattices," Int. J. Impact Eng., 37 [ 9 ] 947-59 (2010).
50. A. J. Jacobsen, S. Mahoney, W. B. Carter, and, S. Nutt, " Vitreous Carbon Micro-Lattice Structures," Carbon, 49 [ 3 ] 1025-32 (2011).
51. V. S. Deshpande, and, N. A. Fleck, " Collapse of Truss Core Sandwich Beams in 3-Point Bending," Int. J. Solids Struct., 38 [ 36-37 ] 6275-305 (2001). (Pubitemid 32782163)
52. H. G. Allen, and, P. S. Bulson, " Background to Buckling." McGraw-Hill, London, 1980.
53. M. R. Begley, and, J. W. Hutchinson, " The Mechanics of Size-Dependent Indentation," J. Mech. Phys. Solids, 46 [ 10 ] 2049-68 (1998). (Pubitemid 128428668)
54. N. A. Fleck, G. M. Muller, M. F. Ashby, and, J. W. Hutchinson, " Strain Gradient Plasticity-Theory and Experiment," Acta Metall. Mater., 42 [ 2 ] 475-87 (1994).
55. J. S. Stolken, and, A. G. Evans, " A microbend Test Method for Measuring the Plasticity Length Scale," Acta Mater., 46 [ 14 ] 5109-15 (1998). (Pubitemid 128421651)
56. N. J. Petch, " The Cleavage Strength of Polycrystals," J. Iron Steel I., 174 [ 1 ] 25-8 (1953).
57. D. J. Lloyd, " Particle Reinforced Aluminum and Magnesium Matrix Composites," Int. Mater. Rev, 39, 1-23 (1994).
58. N. A. Fleck, and, J. W. Hutchinson, " Strain Gradient Plasticity," Adv. Appl. Mech., 33, 295-361 (1997).
59. N. A. Fleck, and, J. W. Hutchinson, " A Reformulation of Strain Gradient Plasticity," J. Mech. Phys. Solids, 49 [ 10 ] 2245-71 (2001). (Pubitemid 32798093)
60. H. Gao, Y. Huang, W. D. Nix, and, J. W. Hutchinson, " Mechanism-Based Strain Gradient Plasticity-I. Theory," J. Mech. Phys. Solids, 47 [ 6 ] 1239-63 (1999).
61. Y. Huang, H. Gao, W. D. Nix, and, J. W. Hutchinson, " Mechanism-Based Strain Gradient Plasticity-II. Analysis," J. Mech. Phys. Solids, 48 [ 1 ] 99-128 (2000).
62. W. D. Nix, and, H. J. Gao, " Indentation Size Effects in Crystalline Materials: A Law for Strain Gradient Plasticity," J. Mech. Phys. Solids, 46 [ 3 ] 411-25 (1998). (Pubitemid 128394207)
63. A. G. Evans, and, J. W. Hutchinson, " A Critical Assessment of Theories of Strain Gradient Plasticity," Acta Mater., 57 [ 5 ] 1675-88 (2009).
64. M. F. Ashby, " Deformation of Plastically Non-Homogeneous Materials," Philos. Mag., 21 [ 170 ] 399 (1970).
65. D. M. Dimiduk, M. D. Uchic, and, T. A. Parthasarathy, " Size-Affected Single-Slip Behavior of Pure Nickel Microcrystals," Acta Mater., 53, 4065-77 (2005). (Pubitemid 41172385)
66. Z. W. Shan, R. Mishra, S. A. Syed, O. L. Warren, and, A. M. Minor, " Mechanical Annealing and Source-limited Deformation in Submicron-diameter Ni Crystals," Nat. Mater., 7 [ 116 ] 115-9 (2008). (Pubitemid 351161340)
67. M. D. Uchic, D. M. Dimiduk, J. N. Florando, and, W. D. Nix, " Sample Dimensions Influence Strength and Crystal Plasticity," Science, 305 [ 5686 ] 986-9 (2004). (Pubitemid 39071769)
68. J. R. Greer, W. C. Oliver, and, W. D. Nix, " Size Dependence of Mechanical Properties of Gold at the Micron Scale in the Absence of Strain Gradients," Acta Mater., 53, 1821-30 (2005). (Pubitemid 40245699)
69. J. R. Greer, and, W. D. Nix, " Nanoscale Gold Pillars Strengthened through Dislocation Starvation," Phys. Rev. B, 73, 245410-6 (2006).
70. C. A. Volkert, and, E. T. Lilleodden, " Size Effects in the Deformation of Sub-Micron Au Columns," Philos. Mag., 86, 5567-79 (2006). (Pubitemid 44410587)
71. A. Budiman, S. Han, J. R. Greer, N. Tamura, J. Patel, and, W. D. Nix, " A Search for Evidence of Strain Gradient Hardening in Au Submicron Pillars Under Uniaxial Compression Using Synchrotron X-ray Microdiffraction, " Acta Mater., 56 [ 3 ] 602-8 (2007).
72. D. Kiener, C. Motz, M. Rester, M. Jenko, and, G. Dehm, " FIB Damage of Cu and Possible Consequences for Miniaturized Mechanical Tests," Mater. Sci. Eng. A, 459 [ 1-2 ] 262-72 (2006).
73. G. Dehm, " Miniaturized Single-Crystalline fcc Metals Deformed in Tension: New Insights in Size-Dependent Plasticity," Prog. Mater. Sci., 54 [ 6 ] 664-88 (2009).
74. D. Kiener, C. Motz, T. Schoberl, M. Jenko, and, G. Dehm, " Determination of Mechanical Properties of Copper at the Micron Scale," Adv. Eng. Mater., 8 1119-25 (2006). (Pubitemid 46051311)
75. D. Kiener, W. Grosinger, G. Dehm, and, R. Pippan, " A Further Step Towards an Understanding of Size-Dependent Crystal Plasticity: In Situ Tension Experiments of Miniaturized Single-Crystal Copper Samples," Acta Mater., 56, 580-92 (2008).
76. D. Kiener, W. Grosinger, and, G. Dehm, " On the Importance of Sample Compliance in Uniaxial Microtesting," Scr. Mater., 60 [ 3 ] 148-51 (2009).
77. D. Kiener, C. Motz, and, G. Dehm, " Micro-Compression Testing: A Critical Discussion of Experimental Constraints," Mater. Sci. Eng. A, 505, 79-87 (2009).
78. R. Maass, S. Van Petegem, D. Grolimund, H. Van Swygenhoven, D. Kiener, and, G. Dehm, " Crystal Rotation in Cu Single Crystal Micropillars: In Situ Laue and Electron Backscatter Diffraction," Appl. Phys. Lett., 017905 (2008).
79. A. T. Jennings, and, J. R. Greer, " Tensile Deformation of Electroplated Copper Nanopillars," Phil. Mag. A., 91 [ 7-9 ] 1108-20 (2010).
80. A. T. Jennings, M. J. Burek, and, J. R. Greer, " Size Effects in Single Crystalline cu Nano-Pillars Fabricated Without the Use of Fib," Phys. Rev. Lett., 104, 135503 (2010).
81. K. S. Ng, and, A. H. W. Ngan, " Breakdown of Schmid's Law in Micropillars," Scr. Mater., 59 [ 7 ] 796-9 (2008).
82. K. S. Ng, and, A. H. W. Ngan, " Effects of Trapping Dislocations Within Small Crystals on Their Deformation Behavior," Acta Mater., 57, 4902-10 (2009).
83. H. Bei, E. P. George, and, G. M. Pharr, " Small-Scale Mechanical Behavior of Intermetallics and Their Composites," Mater. Sci. Eng. A, 483-484, 218-22 (2008). (Pubitemid 351494582)
84. H. Bei, S. Shim, G. M. Pharr, and, E. P. George, " Effects of Pre-Strain on the Compressive Stress-Strain Response of Mo-Alloy Single-Crystal Micropillars," Acta Mater., 56 [ 17 ] 4762-70 (2008).
85. H. Bei, and, S. Shim, " Effects of Focused Ion Beam Milling on the Mechanical Behavior of a Molybdenum-Alloy Single Crystal," Appl. Phys. Lett., 91 [ 11 ] 11915 (2007).
86. J.-Y. Kim, D. Jang, and, J. R. Greer, " Insights into Deformation Behavior and Microstructure Evolution in Nb Single Crystalline Nano-Pillars Under Uniaxial Tension and Compression," Scr. Mater., 61 [ 3 ] 300-3 (2009).
87. J. Y. Kim, and, J. R. Greer, " Tensile and Compressive Behavior of Gold and Molybdenum Single Crystals at the Nano-Scale," Acta Mater., 57 [ 17 ] 5245-53 (2009).
88. J. Y. Kim, D. C. Jong, and, J. R. Greer, " Tensile and Compressive Behavior of Tungsten, Molybdenum, Tantalum and Niobium at the Nanoscale," Acta Mater., 58 [ 7 ] 2355-63 (2010).
89. A. S. Schneider, D. Kaufmann, B. G. Clark, C. P. Frick, P. A. Gruber, R. Monig, O. Kraft, and, E. Arzt, " Correlation Between Critical Temperature and Strength of Small-Scale bcc Pillars," Phys. Rev. Lett., 103, 105501 (2009).
90. E. Lilleodden, " Microcompression Study of Mg (0001) Single Crystal," Scr. Mater., 62 [ 8 ] 532-5 (2010).
91. C. M. Byer, B. Li, B. Cao, and, K. T. Ramesh, " Microcompression of Single-Crystal Magnesium," Scr. Mater., 62 [ 8 ] 536-9 (2010).
92. Q. Yu, Z.-W. Shan, J. Li, X. Huang, L. Xiao, J. Sun, and, E. Ma, " Strong Crystal Size Effect on Deformation Twinning," Nature, 463, 335-8 (2010).
93. G. Lee, J.-Y. Kim, A. S. Budiman, N. Tamura, M. Kunz, K. Chen, M. J. Burek, J. R. Greer, and, T. Y. Tsui, " Fabrication, Structure, and Mechanical Properties of Indium Nanopillars," Acta Mater., 58 [ 4 ] 1361-8 (2010).
94. E. A. Withey, A. M. Minor, Jr, D. C. Morris, J. W. Morris, and, S. Kuramot, " The Deformation of Gum Metal Through In Situ Compression of Nanopillars," Acta Mater., 58 [ 7 ] 2652-65 (2010).
95. E. A. Withey, J. Ye, A. M. Minor, S. Kuramoto, D. C. Chrzan, and, J. W. Morris Jr, " Nanomechanical Testing of Gum Metal," Exp. Mech., 50 37-45 (2010).
96. A. Rinaldi, P. Peralta, C. Friesen, and, K. Sieradzki, " Sample-Size Effects in the Yield Behavior of Nanocrystalline Nickel," Acta Mater., 56 511-7 (2008).
97. D. Dang, and, J. R. Greer, " Size-Induced Weakening and Grain Boundary-Assisted Deformation in 60nm Grained Ni Nanopillars," Scripta Mater., 64, 77-80 (2011).
98. B. G. Clark, D. S. Gianola, O. Kraft, and, C. P. Frick, " Size Independent Shape Memory Behavior of Nickel-Titanium," Adv. Eng. Mater., 12 [ 8 ] 805-15 (2010).
99. C. P. Frick, S. Orso, and, E. Arzt, " Loss of Pseudoelasticity in Nickel-Titanium Submicron Compression Pillars," Acta Mater., 55, 3845-55 (2007). (Pubitemid 46755686)
100. C. P. Frick, B. G. Clark, S. Orso, A. S. Schneider, and, E. Arzt, " Size Effect on Strength an Strain Hardening of Small-Scale (111), Nickel Compression Pillars," Mater. Sci. Eng. A, 489 [ 1-2 ] 319-29 (2008). (Pubitemid 351804154)
101. C. P. Frick, B. G. Clark, S. Orso, P. Sonnweber-Ribic, and, E. Arzt, " Orientation-Independent Pseudoelasticity in Small-Scale NiTi Compression Pillars," Scr. Mater., 59, 7-10 (2008).
102. C. P. Frick, B. G. Clark, A. S. Schneider, R. MaaÃ, S. Van Petegem, and, H. Van Swygenhoven, " On the Plasticity of Small-Scale Nickel-Titanium Shape Memory Alloys," Scr. Mater., 62, 492-5 (2010).
103. J. M. San Juan, M. L. Nõ, and, C. A. Schuh, " Nanoscale Shape-Memory Alloys for Ultrahigh Mechanical Damping," Nat. Nanotechnol., 4, 415-9 (2009).
104. J. M. San Juan, M. L. Nõ, and, C. A. Schuh, " Superelasticity and Shape Memory in Micro- and Nanometer-Scale Pillars," Adv. Mater., 20, 272-8 (2008). (Pubitemid 351205702)
105. D. Jang, and, J. R. Greer, " Transition From a Strong-Yet-Brittle to a Stronger-and-Ductile State by Size Reduction of Metallic Glasses," Nat. Mater., 9, 215-9 (2010).
106. C. A. Volkert, A. Donohue, and, F. Spaepen, " Effect of Sample Size on Deformation in Amorphous Metals," J. Appl. Phys., 103 [ 8 ] 083539 (2008).
107. C. Q. Chen, Y. T. Pei, and, J. T. M. De Hosson, " Strength of Submicrometer Diameter Pillars of Metallic Glasses Investigated with in Situ Transmission Electron Microscopy," Philos. Mag. Lett., 89 [ 10 ] 633-40 (2009).
108. M. D. Uchic, P. A. Shade, and, D. M. Dimiduk, " Plasticity of Micrometer-Scale Single Crystals in Compression," Annu. Rev. Mater. Res., 39 [ 1 ] 361-86 (2009).
109. R. Dou, and, B. Derby, " A Universal Scaling Law for the Strength of Metal Micropillars and Nanowires," Scr. Mater., 61 [ 5 ] 524-7 (2009).
110. C. V. Thompson, " The Yield Stress of Polycrystalline Thin Films," J. Mater. Res., 8, 237 (1993).
111. B. von Blanckenhagen, P. Gumbsch, and, E. Arzt, " Dislocation Sources and the Flow Stress of Polycrystalline Thin Metal Films," Philos. Mag. Lett., 83 [ 1 ] 1-8 (2003).
112. M. S. De Guzman, G. Neubauer, P. Flinn, and, W. D. Nix, " The Role of Indentation Depth on the Measured Hardness of Materials," Mater. Res. Soc. Symp. Proc., 308 613 (1993).
113. J. R. Greer, W. C. Oliver, and, W. D. Nix, " Size Dependence of Mechanical Properties of Gold at the Micron Scale in the Absence of Strain Gradients," Acta Mater., 53 [ 6 ] 1821-30 (2005). (Pubitemid 40245699)
114. K. S. Ng, and, A. H. W. Ngan, " Stochastic Nature of Plasticity of Aluminum Micro-Pillars," Acta Mater., 56 [ 8 ] 1712-20 (2008).
115. S. I. Rao, D. M. Dimiduk, T. A. Parthasarathy, M. D. Uchic, M. Tang, and, C. Woodward, " Athermal Mechanisms of Size-Dependent Crystal Flow Gleaned From Three-Dimensional Discrete Dislocation Simulations," Acta Mater., 56 [ 13 ] 3245-59 (2008).
116. D. M. Norfleet, D. M. Dimiduk, S. J. Polasik, M. D. Uchic, and, M. J. Mills, " Dislocation Structures and Their Relationship to Strength in Deformed Nickel Microcrystals," Acta Mater., 56 [ 13 ] 2988-3001 (2008).
117. T. A. Parthasarathy, S. I. Rao, D. M. Dimiduk, M. D. Uchic, and, D. R. Trinkle, " Contribution to size effect of yield strength from the stochastics of dislocation source lengths in finite samples," Scr. Mater., 56 [ 4 ] 313-6 (2007). (Pubitemid 44834485)
118. S. I. Rao, D. M. Dimiduk, M. Tang, T. A. Parthasarathy, M. D. Uchic, and, C. Woodward, " Estimating the Strength of Single-Ended Dislocation Sources in Micron-Sized Single Crystals,'' Philos. Mag. A, 87 [ 30 ], 4777-94 (2007). (Pubitemid 47389223)
119. D. M. Dimiduk, C. Woodward, R. LeSar, and, M. D. Uchic, " Scale-Free Intermittent Flow in Crystal Plasticity," Science, 312, 1188-90 (2006). (Pubitemid 43801139)
120. O. Kraft, P. A. Gruber, R. Monig, and, D. Weygand, " Plasticity in Confined Dimensions,'' Annu. Rev. Mater. Res., 40, 293-317 (2010).
121. A. T. Jennings, M. J. Burek, and, J. R. Greer, " Size Effects in Single Crystalline cu Nano-Pillars Fabricated Without the Use of Fib," Phys. Rev. Lett., 104, 135503 (2010).
122. S. Lee, S. Han, and, W. D. Nix, " Uniaxial Compression of fcc Au Nanopillars on an MgO Substrate: The Effects of Prestraining and Annealing," Acta Mater., 57 [ 15 ] 4404-15 (2009).
123. S. Shim, H. Bei, M. K. Miller, G. M. Pharr, and, E. P. George, " Effects of Focused Ion Beam Milling on the Compressive Behavior of Directionally Solidified Micropillars and the Nanoindentation Response of an Electropolished Surface," Acta Mater., 57, 503-10 (2009).
124. J. A. El-Awady, C. Woodward, D. M. Dimiduk, and, N. M. Ghoniem, " Effects of Focused Ion Beam Induced Damage on the Plasticity of Micropillars," Phys. Rev. B, 80, 104104 (2009).
125. R. Ikeda, H. Ogi, T. Ogawa, and, M. Takemoto, " Mechanical Properties of CVD Synthesized Polycrystalline Diamond," Ind. Diamond Quat., 69, 35-8 (2009).
126. N. A. Fleck, V. Deshpande, and, M. F. Ashby, " Micro-Architected Materials: Past, Present and Future," Proc. Royal Soc. A, 466, 2495-516 (2010).
127. D. J. Bell, T. J. Lu, N. A. Fleck, and, S. M. Spearing, " MEMS Actuators and Sensors: Observations on Their Performance and Selection for Purpose," J. Micromech. Microeng., 15 [ 7 ] S153-64 (2005). (Pubitemid 40872156)
128. M. A. Haque, and, T. Saif, " Mechanical Testing at the Micro/Nano Scale." in Springer Handbook of Experimental Solid Mechanics. Edited by, W. N. Sharpe,. Springer, New York, 2008.
129. A. Torrents, K. Azgin, S. W. Godfrey, E. S. Topalli, T. Akin, and, L. Valdevit, " MEMS Resonant Load Cells for Micro-Mechanical Test Frames: Feasibility Study and Optimal Design," J. Micromech. Microeng., 20 125004 (17pp) (2010).
130. F. Giessibl, " Advances in Atomic Force Microscopy," Rev. Mod. Phys., 75 [ 3 ] 949-83 (2003). (Pubitemid 37249573)
131. P. Hinterdorfer, and, Y. Dufrene, " Detection and Localization of Single Molecular Recognition Events Using Atomic Force Microscopy," Nat. Methods, 3 [ 5 ] 347-55 (2006).
132. G. Schitter, and, M. J. Rost, " Scanning Probe Microscopy at Video-Rate," Mater. Today, 11, 40-8 (2008).
133. M. D. Kriese, W. W. Gerberich, and, N. R. Moody, " Quantitative Adhesion Measures of Multilayer Films: Part I. Indentation Mechanics," J. Mater. Res., 14 [ 7 ] 3007-18 (1999).
134. M. D. Kriese, W. W. Gerberich, and, N. R. Moody, " Quantitative Adhesion Measures of Multilayer Films: Part II. Indentation of W/Cu, W/W, Cr/W," J. Mater. Res., 14 [ 7 ] 3019-26 (1999).
135. E. T. Lilleodden, W. Bonin, J. Nelson, J. T. Wyrobek, and, W. W. Gerberich, " In-Situ Imaging of MU-N Load Indents into GAAS," J. Mater. Res., 10 [ 9 ] 2162-5 (1995).
136. W. D. Nix, " Elastic and Plastic Properties of Thin Films on Substrates: Nanoindentation Techniques," Mat. Sci. Eng. A-Struct., 234, 37-44 (1997). (Pubitemid 127409167)
137. W. C. Oliver, and, G. M. Pharr, " An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., 7 [ 6 ] 1564-83 (1992).
138. W. C. Oliver, and, G. M. Pharr, " Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology," J. Mater. Res., 19 [ 1 ] 3-20 (2004).
139. J. R. Greer, J.-Y. Kim, and, M. J. Burek, " The In-Situ Mechanical Testing of Nanoscale Single-Crystalline Nanopillars," J. Mater., 61 [ 12 ] 19-25 (2009).
140. J.-Y. Kim, and, J. R. Greer, " Tensile and Compressive Behavior of Gold and Molybdenum Single Crystals at the Nano-Scale," Acta Mater., 57, 5245-53 (2009).
141. Z. Y. Xue, and, J. W. Hutchinson, " Constitutive Model for Quasi-Static Deformation of Metallic Sandwich Cores," Int. J. Numer. Meth. Eng., 61 [ 13 ] 2205-38 (2004). (Pubitemid 40008430)
142. J. E. Angelo, N. R. Moody, and, M. I. Baskes, " Trapping of Hydrogen to Lattice-Defects in Nickel," Modelling Simul. Mater. Sci. Eng., 3 [ 3 ] 289-307 (1995).
143. M. I. Baskes, " Modified Embedded-Atom Potentials for Cubic Materials," Phys. Rev. B, 46 [ 5 ] 2727-42 (1992).
144. W. Xiao, M. I. Baskes, and, K. Cho, " MEAM Study of Carbon Atom Interaction With Ni Nano Particle," Surf. Sci., 603 [ 13 ] 1985-98 (2009).
145. Y. Jiang, Y. G. Wei, J. R. Smith, J. W. Hutchinson, and, A. G. Evans, " First Principles Based Predictions of the Toughness of a Metal/Oxide Interface," Int. J. Mater. Res., 101 [ 1 ] 8-15 (2010).
146. V. S. Deshpande, A. Needleman, and, E. Van der Giessen, " Plasticity Size Effects in Tension and Compression of Single Crystals," J. Mech. Phys. Solids, 53 [ 12 ] 2661-91 (2005). (Pubitemid 41377792)
147. H. Tang, K. W. Schwarz, and, H. D. Espinosa, " Dislocation-Source Shutdown and the Plastic Behavior of Single-Crystal Micropillars," Phys. Rev. Lett., 100, 185503 (2008).
148. E. Van der Giessen, and, A. Needleman, " Discrete Dislocation Plasticity-A Simple Planar Model," Modelling Simul. Mater. Sci. Eng., 3 [ 5 ] 689-735 (1995).
149. M. D. Uchic, P. A. Shade, and, D. M. Dimiduk, " Plasticity of Micrometer-Scale Single Crystals in Compression," Annu. Rev. Mater. Res., 39, 361-86 (2009).
150. J. Wang, A. G. Evans, K. Dharmasena, and, H. N. G. Wadley, " On the Performance of Truss Panels With Kagome Cores," Int. J. Solids Struct., 40 [ 25 ] 6981-8 (2003). (Pubitemid 37332686)
151. M. P. Bendsoe, and, O. Sigmund, " Topology Optimization," pp. 370. Springer, Berlin, Germany, (2002).
152. P. W. Christensen, and, A. Klabring, " An Introduction to Structural Optimization," pp. 214. Springer, Berlin, Germany, (2008).
153. O. Sigmund, and, S. Torquato, " Design of Materials With Extreme Thermal Expansion Using a Three-Phase Topology Optimization Method," J. Mech. Phys. Solids, 45 [ 6 ] 1037-67 (1997). (Pubitemid 127403332)
154. O. Sigmund, and, S. Torquato, " Design of Smart Composite Materials Using Topology Optimization," Smart Mater. Struct., 8 [ 3 ] 365-79 (1999).
155. S. Hyun, and, S. Torquato, " Optimal and Manufacturable Two-Dimensional, Kagome-Like Cellular Solids," J. Mater. Res., 17 [ 1 ] 137-44 (2002). (Pubitemid 34574590)
156. A. J. Jacobsen, W. Barvosa-Carter, and, S. Nutt, " Micro-Scale Truss Structures With Three-Fold And Six-Fold Symmetry Formed From Self-Propagating Polymer Waveguides," Acta Mater., 56 [ 11 ] 2540-8 (2008).
157. J. R. Greer, and, J. T. M. De Hosson, " Plasticity in Small-Sized Metallic Systems: Intrinsic Versus Extrinsic Size Effects," Prog. Mater. Sci., 56, 654-724 (2011).
158. J.-Y. Kim, and, J. R. Greer, " Size-Dependent Mechanical Properties of Mo Nanopillars," Appl. Phys. Lett., 93, 101916 (2008).
159. A. J. Jacobsen, W. Barvosa-Carter, and, S. Nutt, " Compression Behavior of Micro-Scale Truss Structures Formed From Self-Propagating Polymer Waveguides," Acta Mater., 55 [ 20 ] 6724-33 (2007). (Pubitemid 350051996)
160. K. Azgin, C. Ro, A. Torrents, T. Akin, and, L. Valdevit, " A Resonant Tuning Fork Sensor with Unprecedented Combination of Resolution and Range." in IEEE MEMS Conference, Paper # 0700. Cancun, Mexico, 2011.