A materials selection protocol for lightweight actively cooled panels

Journal of Applied Mechanics, Transactions ASME

Volumn 75, Issue 6, 2008, Pages 0610221-06102215

  Valdevit, Lorenzo ^a   Vermaak, Natasha ^b   Zok, Frank W ^b   Evans, Anthony G ^b  

^a University of California at Irvine   (United States)

^b University of California   (United States)

Author keywords

Active cooling; Hypersonics; Lightweight structures; Materials selection; Multi functional optimization; Sandwich panels; Thermal stresses

Indexed keywords

ACTIVE COOLING; HYPERSONICS; LIGHTWEIGHT STRUCTURES; MATERIALS SELECTION; MULTI-FUNCTIONAL OPTIMIZATION; SANDWICH PANELS; THERMAL STRESSES;

AEROSPACE APPLICATIONS; CODES (SYMBOLS); COMBUSTION; COMBUSTORS; HYPERSONIC AERODYNAMICS; METALLIC COMPOUNDS; NIOBIUM; NIOBIUM ALLOYS; SILICON CARBIDE; STRUCTURAL OPTIMIZATION;

ALLOYS;

EID: 55149097631     PISSN: 00218936     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2966270     Document Type: Article

References (35)

1. Steeves, C. A., He, M. Y., Valdevit, L., Kasen, S. D., Wadley, H. N. G., and Evans, A. G., 2008, "Feasibility of Metallic Structural Heat Pipes as Sharp Leading Edges for Hypersonic Vehicles," ASME J. Appl. Mech., in press.
2. Curran, E. T., and Murthy, S. N. B., 2000, Scramjet Propulsion, American Institute of Aeronautics and Astronautics, Reston, VA.
3. Heiser, W. H., and Pratt, D. T., 1994, Hypersonic Airbreathing Propulsion, AIAA, Washington, DC.
4. Bertin, J. J., 1994, Hypersonic Aerothermodynamics, American Institute of Aeronautics and Astronautics, Washington, DC.
5. Buchmann, O. A., 1979, "Thermal-Structural Design Study of an AirframeIntegrated Scramjet," Technical Report No. NASA 3141.
6. Rakow, J. F., and Waas, A. M., 2005, "Thermal Buckling of Metal Foam Sandwich Panels for Convective Thermal Protection Systems," J. Spaceer. Rockets, 42(5), pp. 832-844.
7. Rakow, J. F., and Waas, A. M., 2005, "Thermomechanical Response of Actively Cooled Metal Foam Sandwich Panels for Thermal Protection Systems," 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, AIAA, Austin, TX.
8. Song, K. D., Choi, S. H., and Scotti, S. J., 2006, "Transpiration Cooling Experiment for Scramjet Engine Combustion Chamber by High Heat Fluxes," J. Propul. Power, 22(1), pp. 96-102.
9. Scotti, S. J., Martin, C. J., and Lucas, S. H., 1988, "Active Cooling Design for Scramjet Engines Using Optimization Methods," Technical Report No. NASA 100581.
10. Youn, B., and Mills, A. E., 1995, "Cooling Panel Optimization for the Active Cooling System of a Hypersonic Aircraft," J. Thermophys. Heat Transfer, 9(1), pp. 136-143.
11. Flieder, W. C., Richard, C. E., Buchmann, O. A., and Walters, F. M., 1971, "An Analytical Study of Hydrogen Cooled Panels for Application to Hypersonic Aircraft," Technical Report No. NASA CR-1650.
12. Walters, F. M., and Buchmann, O. A., 1971, "Heat Transfer and Fluid Flow Analysis of Hydrogen-Cooled Panels and Manifold Systems," Technical Report No. NASA CR-66925.
13. Evans, A. G., Mumm, D. R., Hutchinson, J. W., Meier, G. H., and Pettit, F. S., 2001, "Mechanisms Controlling the Durability of Thermal Barrier Coatings," Prog. Mater. Sci., 46(5). pp. 505-553.
14. Gnielinski, V., 1976, "New Equations for Heat and Mass-Transfer in Turbulent Pipe and Channel Flow," Int. Chem. Eng., 16(2), pp. 359-368.
15. Bree. J., 1969, "Incremental Growth Due to Creep and Plastic Yielding of Thin Tubes Subjected to Internal Pressure and Cyclic Thermal Stresses," J. Strain Anal., 3(2), pp. 122-127.
16. Bree, J., 1989, "Plastic-Deformation of a Closed Tube Due to Interaction of Pressure Stresses and Cyclic Thermal-Stresses," Int. J. Mech. Sci., 31(11-12), pp. 865-892.
17. Boley, B. A., and Weiner, J. H., 1960, Theory of Thermal Stresses, Wiley, New York.
18. Rathbun, H. J., Zok, F. W., and Evans, A. G., 2005, "Strength Optimization of Metallic Sandwich Panels Subject to Bending," Int. J. Solids Struct., 42(26), pp. 6643-6661.
19. Valdevit, L., Hutchinson, J. W., and Evans, A. G., 2004, "Structurally Optimized Sandwich Panels With Prismatic Cores," Int. J. Solids Struct., 41(1819), pp. 5105-5124.
20. Valdevit, L., Wei, Z., Mercer, C., Zok, F. W., and Evans, A. G., 2006, "Structural Performance of Near-Optimal Sandwich Panels With Corrugated Cores," Int. J. Solids Struct., 43(16), pp. 4888-4905.
21. Wei, Z., Zok, F. W., and Evans, A. G., 2006, "Design of Sandwich Panels With Prismatic Cores," ASME J. Eng. Mater. Technol., 128(2). pp. 186-192.
22. Wicks, N., and Hutchinson, J. W., 2001, "Optimal Truss Plates," Int. J. Solids Struct., 38(30-31), pp. 5165-5183.
23. Wicks, N., and Hutchinson, J. W., 2004, "Performance of Sandwich Plates With Truss Cores," Mech. Mater., 36(8), pp. 739-751.
24. Zok, F. W., Rathbun, H., He, M., Ferri, E., Mercer, C., McMeeking, R. M., and Evans, A. G., 2005, "Structural Performance of Metallic Sandwich Panels With Square Honeycomb Cores," Philos. Mag., 85(26-27), pp. 3207-3234.
25. Zok, F. W., Rathbun, H. J., Wei, Z., and Evans, A. G., 2003, "Design of Metallic Textile Core Sandwich Panels," Int. J. Solids Struct., 40(20. pp. 5707-5722.
26. Zok, F. W. Waltner, S. A., Wei, Z., Rathbun, H. J., McMeeking, R. M., and Evans, A. G., 2004, "A Protocol for Characterizing the Structural Performance of Metallic Sandwich Panels: Application to Pyramidal Truss Cores," Int. J. Solids Struct., 41(22-23), pp. 6249-6271.
27. National Research Council (US) Committee on the National Aerospace Initiative, 2004, Evaluation of the National Aerospace Initiative, National Academy, Washington, DC.
28. Novak, M. D., and Levi, C. G., 2007, "Oxidation and Volatilization of Silicide Coatings for Refractory Niobium Alloys," ASME IMECE, Seattle, WA.
29. Marshall, D. B., personal communication.
30. Lu, T. J., Valdevit, L., and Evans, A. G., 2005, "Active Cooling by Metallic Sandwich Structures With Periodic Cores," Prog. Maler. Sci., 50(7), pp. 789-815.
31. Valdevit, L., Pantano, A., Stone, H. A., and Evans, A. G., 2006, "Optimal Active Cooling Performance of Metallic Sandwich Panels With Prismatic Cores," Int. J. Heat Mass Transfer, 49(21-22), pp. 3819-3830.
32. Bejan, A., 2004, Convection Heat Transfer, Wiley, Hoboken, NJ.
33. Moody, L. F., 1944, "Friction Factors for Pipe Flow," Trans. ASME. 66, pp. 671-684.
34. Wang, M., and Laird, C., 1996, "Characterization of Microstructure and Tensile Behavior of a Cross-Woven C-SiC Composite," Acta Mater., 44(4), pp. 1371-1387.
35. Wang, M. D., and Laird, C., 1996, "Damage and Fracture of a Cross Woven C/SiC Composite Subject to Compression Loading," J. Mater. Sci., 31(8), pp. 2065-2069.