메뉴 건너뛰기




Volumn 21, Issue 4, 2011, Pages

A review of micro-powder injection moulding as a microfabrication technique

Author keywords

[No Author keywords available]

Indexed keywords

BASIC ELEMENTS; CERAMIC COMPONENT; DIMENSIONAL ACCURACY; LATEST DEVELOPMENT; MICRO POWDER INJECTION MOULDING; MICRO-FABRICATION TECHNIQUES; MICRO-MANUFACTURING; PROCESS CHAIN; SHAPE COMPLEXITY;

EID: 79953645940     PISSN: 09601317     EISSN: 13616439     Source Type: Journal    
DOI: 10.1088/0960-1317/21/4/043001     Document Type: Review
Times cited : (118)

References (145)
  • 1
    • 73249126111 scopus 로고    scopus 로고
    • Micro powder injection moulding-challenges and opportunities
    • Petzoldt F 2008 Micro powder injection moulding-challenges and opportunities PIM Int. 2 37-42
    • (2008) PIM Int. , vol.2 , pp. 37-42
    • Petzoldt, F.1
  • 2
    • 38849160031 scopus 로고    scopus 로고
    • Micro powder injection molding-large scale production technology for micro-sized components
    • DOI 10.1007/s11431-008-0023-y
    • Yin H, Jia C and Qu X 2008 Micro powder injection molding-large scale production technology for micro-sized components Sci. China Ser. E: Technol. Sci. 51 121-6 (Pubitemid 351206412)
    • (2008) Science in China, Series E: Technological Sciences , vol.51 , Issue.2 , pp. 121-126
    • Yin, H.1    Jia, C.2    Qu, X.3
  • 3
    • 78650102847 scopus 로고    scopus 로고
    • Medical and dental applications for microminiature powder injection moulding (microPIM) - A roadmap for growth
    • German R M 2009 Medical and dental applications for microminiature powder injection moulding (microPIM)-a roadmap for growth PIM Int. 3 21-9
    • (2009) PIM Int. , vol.3 , pp. 21-29
    • German, R.M.1
  • 4
    • 0000509283 scopus 로고    scopus 로고
    • Injection molding and related techniques for fabrication of microstructures
    • Piotter V, Hanemann T, Ruprecht R and Hauelt J 1997 Injection molding and related techniques for fabrication of microstructures Microsyst. Technol. 3 129-33 (Pubitemid 127523849)
    • (1997) Microsystem Technologies , vol.3 , Issue.3 , pp. 129-133
    • Piotter, V.1    Hanemann, T.2    Ruprecht, R.3    Hausselt, J.4
  • 7
    • 0032624452 scopus 로고    scopus 로고
    • PIM looks for role in the micro world
    • Piotter V 1999 PIM looks for role in the micro world Met. Powder Rep. 54 36-9
    • (1999) Met. Powder Rep. , vol.54 , Issue.6 , pp. 36-39
    • Piotter, V.1
  • 11
    • 60849122261 scopus 로고    scopus 로고
    • Micro-injection moulding of polymer microfluidic devices
    • Attia U M, Marson S and Alcock J R 2009 Micro-injection moulding of polymer microfluidic devices Microfluid. Nanofluid. 7 1-28
    • (2009) Microfluid. Nanofluid. , vol.7 , Issue.1 , pp. 1-28
    • Attia, U.M.1    Marson, S.2    Alcock, J.R.3
  • 12
    • 33845284263 scopus 로고    scopus 로고
    • Effects of thermal debinding on surface roughness in micro powder injection molding
    • DOI 10.1016/j.matlet.2006.05.070, PII S0167577X06006768
    • Liu L, Loh N H, Tay B Y, Tor S B, Murakoshi Y and Maeda R 2007 Effects of thermal debinding on surface roughness in micro powder injection molding Mater. Lett. 61 809-12 (Pubitemid 44873133)
    • (2007) Materials Letters , vol.61 , Issue.3 , pp. 809-812
    • Liu, L.1    Loh, N.H.2    Tay, B.Y.3    Tor, S.B.4    Murakoshi, Y.5    Maeda, R.6
  • 13
    • 0036693338 scopus 로고    scopus 로고
    • Injection molding of microstructured components from plastics, metals and ceramics
    • Ruprecht R, Gietzelt T, Müller K, Piotter V and Hauelt J 2002 Injection molding of microstructured components from plastics, metals and ceramics Microsyst. Technol. 8 351-8
    • (2002) Microsyst. Technol. , vol.8 , Issue.4-5 , pp. 351-358
    • Ruprecht, R.1    Gietzelt, T.2    Müller, K.3    Piotter, V.4    Hauelt, J.5
  • 19
    • 17444392308 scopus 로고    scopus 로고
    • New features in material issues for metallic micro components by MIM
    • Rota A 2002 New features in material issues for metallic micro components by MIM Proc. PM2TEC pp 10/49-/57
    • (2002) Proc. PM2TEC
    • Rota, A.1
  • 20
    • 0036694022 scopus 로고    scopus 로고
    • Micro powder metallurgy for the replicative production of metallic microstructures
    • Rota A, Duong T V and Hartwig T 2002 Micro powder metallurgy for the replicative production of metallic microstructures Microsyst. Technol. 8 323-5
    • (2002) Microsyst. Technol. , vol.8 , Issue.4-5 , pp. 323-325
    • Rota, A.1    Duong, T.V.2    Hartwig, T.3
  • 21
    • 1242276517 scopus 로고    scopus 로고
    • Fine powders give micro producers the cutting edge
    • Rota A, Imgrund P and Petzoldt F 2004 Fine powders give micro producers the cutting edge Met. Powder Rep. 59 14-7
    • (2004) Met. Powder Rep. , vol.59 , Issue.2 , pp. 14-17
    • Rota, A.1    Imgrund, P.2    Petzoldt, F.3
  • 23
    • 31444446777 scopus 로고    scopus 로고
    • Effects of injection molding parameters on the production of microstructures by micropowder injection molding
    • DOI 10.1081/AMP-200060431, PII V145645612212063
    • Fu G, Loh N H, Tor S B, Murakoshi Y and Maeda R 2005 Effects of injection molding parameters on the production of microstructures by micropowder injection molding Mater. Manuf. Process. 20 977-85 (Pubitemid 43148884)
    • (2005) Materials and Manufacturing Processes , vol.20 , Issue.6 , pp. 977-985
    • Fu, G.1    Loh, N.H.2    Tor, S.B.3    Murakoshi, Y.4    Maeda, R.5
  • 25
    • 33749534327 scopus 로고    scopus 로고
    • Micro powder injection molding: Sintering kinetics of microstructured components
    • DOI 10.1016/j.scriptamat.2006.08.039, PII S1359646206006191
    • Liu L, Loh N H, Tay B Y, Tor S B, Murakoshi Y and Maeda R 2006 Micro powder injection molding: sintering kinetics of microstructured components Scr. Mater. 55 1103-6 (Pubitemid 44529092)
    • (2006) Scripta Materialia , vol.55 , Issue.12 , pp. 1103-1106
    • Liu, L.1    Loh, N.H.2    Tay, B.Y.3    Tor, S.B.4    Murakoshi, Y.5    Maeda, R.6
  • 26
    • 77957848730 scopus 로고    scopus 로고
    • Fabrication of robust tooling for mass production of polymeric microfluidic devices
    • Fu G, Tor S B, Loh N H and Hardt D E 2010 Fabrication of robust tooling for mass production of polymeric microfluidic devices J. Micromech. Microeng. 20 085019
    • (2010) J. Micromech. Microeng. , vol.20 , Issue.8 , pp. 085019
    • Fu, G.1    Tor, S.B.2    Loh, N.H.3    Hardt, D.E.4
  • 28
    • 38349158016 scopus 로고    scopus 로고
    • Innovations in micro metal injection molding process by lost form technology
    • Nishiyabu K, Kanoko Y and Tanaka S 2007 Innovations in micro metal injection molding process by lost form technology Mater. Sci. Forum 534-536 369-72
    • (2007) Mater. Sci. Forum , vol.534-536 , pp. 369-372
    • Nishiyabu, K.1    Kanoko, Y.2    Tanaka, S.3
  • 29
    • 33745254220 scopus 로고    scopus 로고
    • Characterization of metallic micro rod arrays fabricated by μMIM
    • DOI 10.1016/j.matchar.2005.11.021, PII S1044580306000039
    • Tay B Y, Liu L, Loh N H, Tor S B, Murakoshi Y and Maeda R 2006 Characterization of metallic micro rod arrays fabricated byμMIM Mater. Charact. 57 80-5 (Pubitemid 43928626)
    • (2006) Materials Characterization , vol.57 , Issue.2 , pp. 80-85
    • Tay, B.Y.1    Liu, L.2    Loh, N.H.3    Tor, S.B.4    Murakoshi, Y.5    Maeda, R.6
  • 30
    • 47249101837 scopus 로고    scopus 로고
    • A micro powder injection molding apparatus for high aspect ratio metal micro-structure production
    • Fu G, Tor S, Loh N, Tay B and Hardt D E 2007 A micro powder injection molding apparatus for high aspect ratio metal micro-structure production J. Micromech. Microeng. 17 1803-9
    • (2007) J. Micromech. Microeng. , vol.17 , Issue.9 , pp. 1803-1809
    • Fu, G.1    Tor, S.2    Loh, N.3    Tay, B.4    Hardt, D.E.5
  • 32
    • 4143075740 scopus 로고    scopus 로고
    • Replication of metal microstructures by micro powder injection molding
    • DOI 10.1016/j.matdes.2004.01.013, PII S0261306904000652
    • Fu G, Loh N H, Tor S B, Murakoshi Y and Maeda R 2004 Replication of metal microstructures by micro powder injection molding Mater. Des. 25 729-33 (Pubitemid 39102802)
    • (2004) Materials and Design , vol.25 , Issue.8 , pp. 729-733
    • Fu, G.1    Loh, N.H.2    Tor, S.B.3    Murakoshi, Y.4    Maeda, R.5
  • 35
    • 70450008436 scopus 로고    scopus 로고
    • The effects of metal particle size and distributions on dimensional accuracy for micro parts in micro metal injection molding
    • Okubo K, Tanaka S and Ito H 2009 The effects of metal particle size and distributions on dimensional accuracy for micro parts in micro metal injection molding Proc. Annual Technical Conf., (ANTEC 2009), (22-24 June 2009) pp 2592-7
    • (2009) Proc. Annual Technical Conf., (ANTEC 2009), (22-24 June 2009) , pp. 2592-2597
    • Okubo, K.1    Tanaka, S.2    Ito, H.3
  • 36
    • 70350077279 scopus 로고    scopus 로고
    • High precision: Micro injection moulding with powder materials
    • D21-4+E25-8
    • Haupt U 2009 High precision: micro injection moulding with powder materials CFI Ceram. Forum Int. 86 D21-4+E25-8
    • (2009) CFI Ceram. Forum Int. , vol.86
    • Haupt, U.1
  • 37
    • 84901925972 scopus 로고    scopus 로고
    • Micro metal injection moulding-quality assurance in series production
    • Rota A, Imgrund P, Kramer L, Meyer R and Haack J 2005 Micro metal injection moulding-quality assurance in series production Proc. Euro PM pp 377-82
    • (2005) Proc. Euro PM , pp. 377-382
    • Rota, A.1    Imgrund, P.2    Kramer, L.3    Meyer, R.4    Haack, J.5
  • 38
    • 79952448802 scopus 로고    scopus 로고
    • Powder injection moulding PIM of feedstock based on hydrosoluble binder and submicronic powder to manufacture parts having micro-details
    • Checot-Moinard D, Rigollet C and Lourdin P 2010 Powder injection moulding PIM of feedstock based on hydrosoluble binder and submicronic powder to manufacture parts having micro-details Powder Technol. at press, doi: 10.1016/j.powtec.2010.08.045
    • (2010) Powder Technol.
    • Checot-Moinard, D.1    Rigollet, C.2    Lourdin, P.3
  • 40
  • 42
    • 77954221329 scopus 로고    scopus 로고
    • CAE-based process design of PIM for microfluidic device components
    • Urval R, Wu C, Atre S V, Park S-J and German R M 2007 CAE-based process design of PIM for microfluidic device components PIM Int. 1 53-8
    • (2007) PIM Int. , vol.1 , pp. 53-58
    • Urval, R.1    Wu, C.2    Atre, S.V.3    Park, S.-J.4    German, R.M.5
  • 43
    • 49749143018 scopus 로고    scopus 로고
    • Optimisation of process conditions in powder injection moulding of microsystem components using a robust design method: Part I. Primary design parameters
    • Urval R, Lee S, Atre SV, Park S-J and German R M 2008 Optimisation of process conditions in powder injection moulding of microsystem components using a robust design method: part I. Primary design parameters Powder Metall. 51 133-42
    • (2008) Powder Metall. , vol.51 , Issue.2 , pp. 133-142
    • Urval, R.1    Lee, S.2    Atre, S.V.3    Park, S.-J.4    German, R.M.5
  • 44
    • 77952700653 scopus 로고    scopus 로고
    • Materials for microminiature powder injection molded medical and dental devices
    • German R M 2010 Materials for microminiature powder injection molded medical and dental devices Int. J. Powder Metall. 46 15-8
    • (2010) Int. J. Powder Metall. , vol.46 , pp. 15-18
    • German, R.M.1
  • 45
    • 70349734585 scopus 로고    scopus 로고
    • Making and measuring in micro MIM manufacturing
    • Nishiyabu K, Andrews I and Tanaka S 2009 Making and measuring in micro MIM manufacturing Met. Powder Rep. 64 22-5
    • (2009) Met. Powder Rep. , vol.64 , Issue.9 , pp. 22-25
    • Nishiyabu, K.1    Andrews, I.2    Tanaka, S.3
  • 47
    • 34547838688 scopus 로고    scopus 로고
    • Fabrication of micro gear by micro powder injection molding
    • DOI 10.1007/s00542-007-0401-6
    • Loh N H, Tor S B, Tay B Y, Murakoshi Y and Maeda R 2008 Fabrication of micro gear by micro powder injection molding Microsyst. Technol. 14 43-50 (Pubitemid 47245154)
    • (2008) Microsystem Technologies , vol.14 , Issue.1 , pp. 43-50
    • Loh, N.H.1    Tor, S.B.2    Tay, B.Y.3    Murakoshi, Y.4    Maeda, R.5
  • 48
    • 77952687465 scopus 로고    scopus 로고
    • Nitriding response of microminiature powder injection molded titanium
    • Osada T and Miura H 2010 Nitriding response of microminiature powder injection molded titanium Int. J. Powder Metall. 46 39-44
    • (2010) Int. J. Powder Metall. , vol.46 , pp. 39-44
    • Osada, T.1    Miura, H.2
  • 50
    • 77954230953 scopus 로고    scopus 로고
    • Characterization and simulation of macroscale mold-filling defects in microminiature powder injection molding
    • Laddha S G, Wu C, Park S-J, Lee S, Ahn S, German R M and Atre S V 2010 Characterization and simulation of macroscale mold-filling defects in microminiature powder injection molding Int. J. Powder Metall. 46 49-60
    • (2010) Int. J. Powder Metall. , vol.46 , pp. 49-60
    • Laddha, S.G.1    Wu, C.2    Park, S.-J.3    Lee, S.4    Ahn, S.5    German, R.M.6    Atre, S.V.7
  • 51
    • 77249085598 scopus 로고    scopus 로고
    • Tribological behavior of 316L stainless steel fabricated by micro powder injection molding
    • Meng J, Loh N H, Tay B Y, Fu G and Tor S B 2010 Tribological behavior of 316L stainless steel fabricated by micro powder injection molding Wear 286 1013-9
    • (2010) Wear , vol.268 , Issue.7-8 , pp. 1013-1019
    • Meng, J.1    Loh, N.H.2    Tay, B.Y.3    Fu, G.4    Tor, S.B.5
  • 52
    • 34147091984 scopus 로고    scopus 로고
    • New functions for microfluidic components by using micro metal injection molding (μ-MIM)
    • DOI 10.1080/00986440701193886, PII 776532445
    • Salk N, Seemann T, Rota A, Schlüter M, Hoffmann M and Harms C 2007 New functions for microfluidic components by using micro metal injection molding (μ-MIM) Chem. Eng. Commun. 194 859-66 (Pubitemid 46563274)
    • (2007) Chemical Engineering Communications , vol.194 , Issue.7 , pp. 859-866
    • Salk, N.1    Seemann, T.2    Rota, A.3    Schluter, M.4    Hoffmann, M.5    Harms, C.6
  • 53
    • 33747626275 scopus 로고    scopus 로고
    • Micro powder injection molding: Process characterization and modeling
    • DOI 10.1007/s00542-006-0117-z, Symposium on Design, Test, Intergration and Packaging of MEMS/MOEMS
    • Heldele R, Schulz M, Kauzlaric D, Korvink J G and Hauelt J 2006 Micro powder injection molding: process characterization and modeling Microsyst. Technol. 12 941-6 (Pubitemid 44267982)
    • (2006) Microsystem Technologies , vol.12 , Issue.10-11 , pp. 941-946
    • Heldele, R.1    Schulz, M.2    Kauzlaric, D.3    Korvink, J.G.4    Hausselt, J.5
  • 54
    • 0033099947 scopus 로고    scopus 로고
    • New trends in powder injection moulding
    • Rak Z S 1999 New trends in powder injection moulding Powder Metall. Met. Ceram. 38 126-32 (Pubitemid 129324698)
    • (1999) Powder Metallurgy and Metal Ceramics , vol.38 , Issue.3-4 , pp. 126-132
    • Rak, Z.S.1
  • 55
    • 0038446069 scopus 로고    scopus 로고
    • Wear resistant tools for reproduction technologies produced by micro powder metallurgy
    • DOI 10.1007/s005420100101
    • Rota A, Duong T-V and Hartwig T 2002 Wear resistant tools for reproduction technologies produced by micro powder metallurgy Microsyst. Technol. 7 225-8 (Pubitemid 41526005)
    • (2002) Microsystem Technologies , vol.7 , Issue.5-6 , pp. 225-228
    • Rota, A.1    Duong, T.-V.2    Hartwig, T.3
  • 56
    • 79751529539 scopus 로고    scopus 로고
    • Evaluating and controlling process variability in micro-injection moulding
    • Attia U M and Alcock J R 2011 Evaluating and controlling process variability in micro-injection moulding Int. J. Adv. Manuf. Technol. 52 183-94
    • (2011) Int. J. Adv. Manuf. Technol. , vol.52 , Issue.1-4 , pp. 183-194
    • Attia, U.M.1    Alcock, J.R.2
  • 58
    • 39849095582 scopus 로고    scopus 로고
    • Microinjection moulding of 316L/17-4PH and 316L/Fe powders for fabrication of magnetic-nonmagnetic bimetals
    • DOI 10.1016/j.jmatprotec.2007.09.068, PII S0924013607008138
    • Imgrund P, Rota A and Simchi A 2008 Microinjection moulding of 316L/17-4PH and 316L/Fe powders for fabrication of magnetic-nonmagnetic bimetals J. Mater. Process. Technol. 200 259-64 (Pubitemid 351318166)
    • (2008) Journal of Materials Processing Technology , vol.200 , Issue.1-3 , pp. 259-264
    • Imgrund, Ph.1    Rota, A.2    Simchi, A.3
  • 59
    • 10044228645 scopus 로고    scopus 로고
    • The mechanical properties, dimensional tolerance and microstructural characterization of micro-molded ceramic and metal components
    • Garino T J, Morales A M and Boyce B L 2004 The mechanical properties, dimensional tolerance and microstructural characterization of micro-molded ceramic and metal components Microsyst. Technol. 10 506-9
    • (2004) Microsyst. Technol. , vol.10 , Issue.6-7 , pp. 506-509
    • Garino, T.J.1    Morales, A.M.2    Boyce, B.L.3
  • 60
    • 33646047431 scopus 로고    scopus 로고
    • Micro powder injection moulding
    • Zauner R 2006 Micro powder injection moulding Microelectron. Eng. 83 1442-4
    • (2006) Microelectron. Eng. , vol.83 , Issue.4-9 , pp. 1442-1444
    • Zauner, R.1
  • 62
    • 38349183230 scopus 로고    scopus 로고
    • Effect of particle size in feedstock properties in micro powder injection molding
    • Baek E R, Supriadi S, Choi C-J, Lee B-T and Lee J-W 2007 Effect of particle size in feedstock properties in micro powder injection molding Mater. Sci. Forum 534-536 349-52
    • (2007) Mater. Sci. Forum , vol.534-536 , pp. 349-352
    • Baek, E.R.1    Supriadi, S.2    Choi, C.-J.3    Lee, B.-T.4    Lee, J.-W.5
  • 63
    • 33947183391 scopus 로고    scopus 로고
    • Binder system for STS 316 nanopowder feedstocks in micro-metal injection molding
    • DOI 10.1016/j.jmatprotec.2006.11.157, PII S0924013606009733
    • Supriadi S, Baek E R, Choi C J and Lee B T 2007 Binder system for STS 316 nanopowder feedstocks in micro-metal injection molding J. Mater. Process. Technol. 187-188 270-3 (Pubitemid 46412758)
    • (2007) Journal of Materials Processing Technology , vol.187-188 , pp. 270-273
    • Supriadi, S.1    Baek, E.R.2    Choi, C.J.3    Lee, B.T.4
  • 64
    • 14544277904 scopus 로고    scopus 로고
    • Mixing and characterisation of 316L stainless steel feedstock for micro powder injection molding
    • DOI 10.1016/j.matchar.2004.11.014, PII S1044580304002815
    • Liu L, Loh N H, Tay B Y, Tor S B, Murakoshi Y and Maeda R 2005 Mixing and characterisation of 316L stainless steel feedstock for micro powder injection molding Mater. Charact. 54 230-8 (Pubitemid 40302852)
    • (2005) Materials Characterization , vol.54 , Issue.3 , pp. 230-238
    • Liu, L.1    Loh, N.H.2    Tay, B.Y.3    Tor, S.B.4    Murakoshi, Y.5    Maeda, R.6
  • 65
    • 78649693157 scopus 로고    scopus 로고
    • Microstructure evolution of 316L stainless steel micro components prepared by micro powder injection molding
    • Liu L, Loh N H, Tay B Y and Tor S B 2010 Microstructure evolution of 316L stainless steel micro components prepared by micro powder injection molding Powder Technol. 206 246-51
    • (2010) Powder Technol. , vol.206 , Issue.3 , pp. 246-251
    • Liu, L.1    Loh, N.H.2    Tay, B.Y.3    Tor, S.B.4
  • 66
    • 79959290386 scopus 로고    scopus 로고
    • Investigation of final-stage sintering of various microsize structures prepared by micro powder injection molding
    • Liu L, Loh N H, Tay B Y, Tor S B, Yin H Q and Qu X H 2010 Investigation of final-stage sintering of various microsize structures prepared by micro powder injection molding Appl. Phys. A at press doi: 10.1007/s00339-010-6060-y
    • (2010) Appl. Phys.
    • Liu, L.1    Loh, N.H.2    Tay, B.Y.3    Tor, S.B.4    Yin, H.Q.5    Qu, X.H.6
  • 67
    • 60249096377 scopus 로고    scopus 로고
    • Development and property identification of 316L stainless steel feedstock for PIM andμPIM
    • Quinard C, Barriere T and Gelin J C 2009 Development and property identification of 316L stainless steel feedstock for PIM andμPIM Powder Technol. 190 123-8
    • (2009) Powder Technol. , vol.190 , Issue.1-2 , pp. 123-128
    • Quinard, C.1    Barriere, T.2    Gelin, J.C.3
  • 68
    • 78651543831 scopus 로고    scopus 로고
    • Experiments and identification in micro powder injection moulding from stainless steel powder 5 μm size
    • Quinard C, Barrière T and Gelin J C 2008 Experiments and identification in micro powder injection moulding from stainless steel powder 5 μm size Int. J. Mater. Form. 1 25-8
    • (2008) Int. J. Mater. Form. , vol.1 , pp. 25-28
    • Quinard, C.1    Barrière, T.2    Gelin, J.C.3
  • 69
    • 70349866164 scopus 로고    scopus 로고
    • Rheological investigation of water atomised stainless steel powder for micro metal injection molding
    • Ibrahim M H I, Muhamad N and Sulong A B 2009 Rheological investigation of water atomised stainless steel powder for micro metal injection molding Int. J. Mech. Mater. Eng. 4 1-8
    • (2009) Int. J. Mech. Mater. Eng. , vol.4 , pp. 1-8
    • Ibrahim, M.H.I.1    Muhamad, N.2    Sulong, A.B.3
  • 72
    • 69549090073 scopus 로고    scopus 로고
    • Accuracy evaluation on SUS ultra-compact module 0.07 mm gears manufactured by MIM
    • Nishiyabu K and Tanaka S 2009 Accuracy evaluation on SUS ultra-compact module 0.07 mm gears manufactured by MIM J. Japan Soc. Powder Powder Metall. 56 268-73
    • (2009) J. Japan Soc. Powder Powder Metall. , vol.56 , Issue.5 , pp. 268-273
    • Nishiyabu, K.1    Tanaka, S.2
  • 73
    • 34948870331 scopus 로고    scopus 로고
    • Net shaping of tungsten components by micro powder injection moulding
    • DOI 10.1016/j.fusengdes.2007.07.013, PII S0920379607003493, Proceedings of the 24th Symposium on Fusion Technology SOFT-24
    • Zeep B, Norajitra P, Piotter V, Boehm J, Ruprecht R and Hausselt J 2007 Net shaping of tungsten components by micro powder injection moulding Fusion Eng. Des. 82 2660-5 (Pubitemid 47532637)
    • (2007) Fusion Engineering and Design , vol.82 , Issue.15-24 , pp. 2660-2665
    • Zeep, B.1    Norajitra, P.2    Piotter, V.3    Boehm, J.4    Ruprecht, R.5    Hausselt, J.6
  • 74
    • 79953659483 scopus 로고    scopus 로고
    • Micro metal injection moulding for thermal management applications using ultrafine powders
    • Schmidt H, Rota A C, Imgrund P and Leers M 2009 Micro metal injection moulding for thermal management applications using ultrafine powders PIM Int. 3 54-8
    • (2009) PIM Int. , vol.3 , pp. 54-58
    • Schmidt, H.1    Rota, A.C.2    Imgrund, P.3    Leers, M.4
  • 75
    • 38349113252 scopus 로고    scopus 로고
    • Micro metal injection molding using hybrid micro/nano powders
    • Nishiyabu K, Kakishita K and Tanaka S 2007 Micro metal injection molding using hybrid micro/nano powders Mater. Sci. Forum 534-536 381-4
    • (2007) Mater. Sci. Forum , vol.534-536 , pp. 381-384
    • Nishiyabu, K.1    Kakishita, K.2    Tanaka, S.3
  • 76
    • 79953660909 scopus 로고    scopus 로고
    • Advanced metal powder injection moulding for multilayered micro porous titanium components
    • Nishiyabu K, Matsuzaki S and Tanaka S 2009 Advanced metal powder injection moulding for multilayered micro porous titanium components PIM Int. 3 60-3
    • (2009) PIM Int. , vol.3 , pp. 60-63
    • Nishiyabu, K.1    Matsuzaki, S.2    Tanaka, S.3
  • 77
    • 78649329517 scopus 로고    scopus 로고
    • Pressureless spark plasma sintering of alumina micro-channel part produced by micro powder injection molding
    • Meng J, Loh N H, Tay B Y, Tor S B, Fu G, Khor K A and Yu L 2011 Pressureless spark plasma sintering of alumina micro-channel part produced by micro powder injection molding Scr. Mater. 64 237-40
    • (2011) Scr. Mater. , vol.64 , Issue.3 , pp. 237-240
    • Meng, J.1    Loh, N.H.2    Tay, B.Y.3    Tor, S.B.4    Fu, G.5    Khor, K.A.6    Yu, L.7
  • 79
    • 79953659623 scopus 로고    scopus 로고
    • Characterisation of alumina feedstock with polyacetal and wax-polymer binder systems for micro powder injection moulding
    • Laddha S et al 2009 Characterisation of alumina feedstock with polyacetal and wax-polymer binder systems for micro powder injection moulding PIM Int. 3 64-70
    • (2009) PIM Int. , vol.3 , pp. 64-70
    • Laddha, S.1
  • 82
    • 78149440657 scopus 로고    scopus 로고
    • Microceramic injection molding of a multilayer micropatterned micropart
    • Wang M-W 2010 Microceramic injection molding of a multilayer micropatterned micropart Int. J. Adv. Manuf. Technol. 51 145-53
    • (2010) Int. J. Adv. Manuf. Technol. , vol.51 , Issue.1-4 , pp. 145-153
    • Wang, M.-W.1
  • 83
    • 58149327449 scopus 로고    scopus 로고
    • Micro injection molding of micro gear using nano-sized zirconia powder
    • Yu P, Li Q, Fuh J, Li T and Ho P 2009 Micro injection molding of micro gear using nano-sized zirconia powder Microsyst. Technol. 15 401-6
    • (2009) Microsyst. Technol. , vol.15 , Issue.3 , pp. 401-406
    • Yu, P.1    Li, Q.2    Fuh, J.3    Li, T.4    Ho, P.5
  • 87
    • 78049453213 scopus 로고    scopus 로고
    • The effects of metal particle size and distributions on dimensional accuracy for micro parts in micro metal injection molding
    • Okubo K, Tanaka S and Ito H 2010 The effects of metal particle size and distributions on dimensional accuracy for micro parts in micro metal injection molding Microsyst. Technol. 16 2037-41
    • (2010) Microsyst. Technol. , vol.16 , Issue.12 , pp. 2037-2041
    • Okubo, K.1    Tanaka, S.2    Ito, H.3
  • 90
    • 1842483014 scopus 로고    scopus 로고
    • Development of a micro annular gear pump by micro powder injection molding
    • Gietzelt T, Jacobi O, Piotter V, Ruprecht R and Hausselt J 2004 Development of a micro annular gear pump by micro powder injection molding J. Mater. Sci. 39 2113-9
    • (2004) J. Mater. Sci. , vol.39 , Issue.6 , pp. 2113-2119
    • Gietzelt, T.1    Jacobi, O.2    Piotter, V.3    Ruprecht, R.4    Hausselt, J.5
  • 91
    • 38349112843 scopus 로고    scopus 로고
    • Net-shape manufacturing of micro porous metal components by powder injection molding
    • Nishiyabu K, Matsuzaki S and Tanaka S 2007 Net-shape manufacturing of micro porous metal components by powder injection molding Mater. Sci. Forum 534-536 981-4
    • (2007) Mater. Sci. Forum , vol.534-536 , pp. 981-984
    • Nishiyabu, K.1    Matsuzaki, S.2    Tanaka, S.3
  • 97
    • 79953664299 scopus 로고    scopus 로고
    • Collaboration and integration in the design of microelectromechanical systems (MEMS)
    • De Grave A and Brissaud D 2005 Collaboration and integration in the design of microelectromechanical systems (MEMS) CIRP Design Conf. 2005
    • (2005) CIRP Design Conf. 2005
    • De Grave, A.1    Brissaud, D.2
  • 99
    • 70350625109 scopus 로고    scopus 로고
    • Metallic glasses: Viable tool materials for the production of surface microstructures in amorphous polymers by micro-hot-embossing
    • Henann D L, Srivastava V, Taylor H K, Hale M R, Hardt D E and Anand L 2009 Metallic glasses: viable tool materials for the production of surface microstructures in amorphous polymers by micro-hot-embossing J. Micromech. Microeng. 19 115030
    • (2009) J. Micromech. Microeng. , vol.19 , Issue.11 , pp. 115030
    • Henann, D.L.1    Srivastava, V.2    Taylor, H.K.3    Hale, M.R.4    Hardt, D.E.5    Anand, L.6
  • 104
    • 77949877277 scopus 로고    scopus 로고
    • Replication performance of Si-N-DLC-coated Si micro-molds in micro-hot-embossing
    • Saha B, Liu E, Tor S B, Khun N W, Hardt D E and Chun J H 2010 Replication performance of Si-N-DLC-coated Si micro-molds in micro-hot-embossing J. Micromech. Microeng. 20 045007
    • (2010) J. Micromech. Microeng. , vol.20 , Issue.4 , pp. 045007
    • Saha, B.1    Liu, E.2    Tor, S.B.3    Khun, N.W.4    Hardt, D.E.5    Chun, J.H.6
  • 105
    • 79953650374 scopus 로고    scopus 로고
    • Improvement in lifetime and replication quality of Si micromold using N:DLC:Ni coatings for microfluidic devices
    • Saha B, Liu E, Tor S B, Hardt D E, Chun J H and Khun N W 2010 Improvement in lifetime and replication quality of Si micromold using N:DLC:Ni coatings for microfluidic devices Sensors Actuators B 150 174-82
    • (2010) Sensors Actuators , vol.150 , Issue.1 , pp. 174-182
    • Saha, B.1    Liu, E.2    Tor, S.B.3    Hardt, D.E.4    Chun, J.H.5    Khun, N.W.6
  • 106
    • 19944384272 scopus 로고    scopus 로고
    • Wear behaviour of mould inserts used in micro powder injection moulding of ceramics and metals
    • DOI 10.1016/j.wear.2005.02.077, PII S0043164805002061, 15th International Conference on Wear of Materials
    • Schneider J, Iwanek H and Zum Gahr K-H 2005 Wear behaviour of mould inserts used in micro powder injection moulding of ceramics and metals Wear 259 1290-8 (Pubitemid 40759018)
    • (2005) Wear , vol.259 , Issue.7-12 , pp. 1290-1298
    • Schneider, J.1    Iwanek, H.2    Zum Gahr, K.-H.3
  • 107
    • 0041341874 scopus 로고    scopus 로고
    • Automation of the powder-injection-moulding process for micro-mechanical parts
    • Fleischer J, Buchholz C and Weule H 2003 Automation of the powder-injection-moulding process for micro-mechanical parts CIRP Ann.: Manuf. Technol. 52 419-22
    • (2003) CIRP Ann.: Manuf. Technol. , vol.52 , Issue.1 , pp. 419-422
    • Fleischer, J.1    Buchholz, C.2    Weule, H.3
  • 108
    • 33646933346 scopus 로고    scopus 로고
    • Automation of the powder injection molding process
    • DOI 10.1007/s00542-006-0100-8
    • Fleischer J and Dieckmann A-M 2006 Automation of the powder injection molding process Microsyst. Technol. 12 702-6 (Pubitemid 43793374)
    • (2006) Microsystem Technologies , vol.12 , Issue.7 , pp. 702-706
    • Fleischer, J.1    Dieckmann, A.-M.2
  • 111
    • 34249700318 scopus 로고    scopus 로고
    • Microinjection molding of thermoplastic polymers: A review
    • Giboz J, Copponnex T and Mélé P 2007 Microinjection molding of thermoplastic polymers: a review J. Micromech. Microeng. 17 R96-109
    • (2007) J. Micromech. Microeng. , vol.17 , Issue.6 , pp. 96-109
    • Giboz, J.1    Copponnex, T.2    Mélé, P.3
  • 112
    • 0141833242 scopus 로고    scopus 로고
    • Injection molding high aspect ratio microfeatures
    • Yao D and Kim B 2002 Injection molding high aspect ratio microfeatures J. Inject. Molding Technol. 6 11-7 (Pubitemid 41558981)
    • (2002) Journal of Injection Molding Technology , vol.6 , Issue.1 , pp. 11-17
    • Yao, D.1    Kim, B.2
  • 113
    • 76449099445 scopus 로고    scopus 로고
    • An evaluation of process-parameter and part-geometry effects on the quality of filling in micro-injection moulding
    • Attia U M and Alcock J R 2009 An evaluation of process-parameter and part-geometry effects on the quality of filling in micro-injection moulding Microsyst. Technol. 15 1861-72
    • (2009) Microsyst. Technol. , vol.15 , Issue.12 , pp. 1861-1872
    • Attia, U.M.1    Alcock, J.R.2
  • 114
    • 78650291584 scopus 로고    scopus 로고
    • Optimising process conditions for multiple quality criteria in micro-injection moulding
    • Attia U M and Alcock J R 2010 Optimising process conditions for multiple quality criteria in micro-injection moulding Int. J. Adv. Manuf. Technol. 50 533-42
    • (2010) Int. J. Adv. Manuf. Technol. , vol.50 , Issue.5-8 , pp. 533-542
    • Attia, U.M.1    Alcock, J.R.2
  • 115
    • 77952467232 scopus 로고    scopus 로고
    • Optimisation of process conditions in powder injection moulding of microsystem components using robust design method: Part 2. Secondary design parameters
    • Urval R, Lee S, Atre S V, Park S-J and German R M 2010 Optimisation of process conditions in powder injection moulding of microsystem components using robust design method: part 2. Secondary design parameters Powder Metall. 53 71-81
    • (2010) Powder Metall. , vol.53 , Issue.1 , pp. 71-81
    • Urval, R.1    Lee, S.2    Atre, S.V.3    Park, S.-J.4    German, R.M.5
  • 119
    • 0030834882 scopus 로고    scopus 로고
    • Catamold - A new direction for powder injection molding
    • Bloemacher M and Weinand D 1997 Catamold-a new direction for powder injection molding J. Mater. Process. Technol. 63 918-22
    • (1997) J. Mater. Process. Technol. , vol.63 , Issue.1-3 , pp. 918-922
    • Bloemacher, M.1    Weinand, D.2
  • 120
    • 0002706807 scopus 로고    scopus 로고
    • Fabrication of micro-parts by high aspect ratio structuring and metal injection molding using the supercritical debinding method
    • Shimizu T, Murakoshi Y, Sano T, Maeda R and Sugiyama S 1998 Fabrication of micro-parts by high aspect ratio structuring and metal injection molding using the supercritical debinding method Microsyst. Technol. 5 90-2 (Pubitemid 128535725)
    • (1998) Microsystem Technologies , vol.5 , Issue.2 , pp. 90-92
    • Shimizu, T.1    Murakoshi, Y.2    Sano, T.3    Maeda, R.4    Sugiyama, S.5
  • 121
    • 0023542150 scopus 로고
    • On densification and shape change during hot isostatic pressing
    • DOI 10.1016/0001-6160(87)90282-3
    • Li W-B, Ashby M F and Easterling K E 1987 On densification and shape change during hot isostatic pressing Acta Metall. 35 2831-42 (Pubitemid 18547468)
    • (1987) Acta Metallurgica , vol.35 , Issue.12 , pp. 2831-2842
    • Li, W.-B.1    Ashby, F.2    Easterling, K.E.3
  • 123
    • 15744377092 scopus 로고    scopus 로고
    • ASTM International 2004 ASTM E112-96(2004)e2: Standard Test Methods for Determining Average Grain Size
    • (2004) Astm International
  • 124
    • 0036575570 scopus 로고    scopus 로고
    • Quasi-static and cyclic testing of specimens with high aspect ratios produced by micro-casting and micro-powder-injection-moulding
    • DOI 10.1007/s00542-001-0131-0
    • Auhorn M, Beck T, Schulze V and Löhe D 2002 Quasi-static and cyclic testing of specimens with high aspect ratios produced by micro-casting and micro-powder-injection-moulding Microsyst. Technol. 8 109-12 (Pubitemid 34638553)
    • (2002) Microsystem Technologies , vol.8 , Issue.2-3 , pp. 109-112
    • Auhorn, M.1    Beck, T.2    Schulze, V.3    Lohe, D.4
  • 125
    • 35148828098 scopus 로고    scopus 로고
    • Analysis of residual stresses in micro powder injection moulded micro bending specimens made of zirconia
    • Residual Stresses VII, ICRS 7 - Proceedings of the 7th International Conference on Residual Stresses, ICRS-7
    • Kasanick B, Wroblewski T, Schulze V and Löhe D 2005 Analysis of residual stresses in micro powder injection moulded micro bending specimens made of zirconia Mater. Sci. Forum 490-491 503-8 (Pubitemid 47543975)
    • (2005) Materials Science Forum , vol.490-491 , pp. 503-508
    • Kasanicka, B.1    Wroblewski, Th.2    Schulze, V.3    Lohe, D.4
  • 126
    • 3042511259 scopus 로고    scopus 로고
    • Microstructure, surface topography and mechanical properties of slip cast and powder injection moulded microspecimens made of zirconia
    • Auhorn M, Kasanick B, Beck T, Schulze V and Löhe D 2003 Microstructure, surface topography and mechanical properties of slip cast and powder injection moulded microspecimens made of zirconia Mater. Res. Adv. Tech. 4 599-605
    • (2003) Mater. Res. Adv. Tech. , vol.4 , pp. 599-605
    • Auhorn, M.1    Kasanick, B.2    Beck, T.3    Schulze, V.4    Löhe, D.5
  • 127
    • 10044280716 scopus 로고    scopus 로고
    • Determination of mechanical properties of slip cast, micro powder injection moulded and microcast high aspect ratio microspecimens
    • Auhorn M, Beck T, Schulze V and Löhe D 2004 Determination of mechanical properties of slip cast, micro powder injection moulded and microcast high aspect ratio microspecimens Microsyst. Technol. 10 489-92
    • (2004) Microsyst. Technol. , vol.10 , Issue.6-7 , pp. 489-492
    • Auhorn, M.1    Beck, T.2    Schulze, V.3    Löhe, D.4
  • 128
    • 77953639958 scopus 로고    scopus 로고
    • Simulating flow can help avoid mould mistakes
    • Thornagel M 2010 Simulating flow can help avoid mould mistakes Met. Powder Rep. 65 26-9
    • (2010) Met. Powder Rep. , vol.65 , Issue.3 , pp. 26-29
    • Thornagel, M.1
  • 129
    • 0036570963 scopus 로고    scopus 로고
    • Analyses of powder segregation in MIM
    • DOI 10.1016/S0026-0657(02)80173-4
    • Barriere T, Liu B and Gelin J C 2002 Analyses of powder segregation in MIM Met. Powder Rep. 57 30-3 (Pubitemid 34515111)
    • (2002) Metal Powder Report , vol.57 , Issue.5 , pp. 30-33
    • Barriere, Th.1    Liu, B.2    Gelin, J.C.3
  • 130
    • 57849083468 scopus 로고    scopus 로고
    • Three-dimensional free surface flow simulation of segregating dense suspensions
    • Ilinca F and Hétu J-F 2008 Three-dimensional free surface flow simulation of segregating dense suspensions Int. J. Numer. Methods Fluids 58 451-72
    • (2008) Int. J. Numer. Methods Fluids , vol.58 , Issue.4 , pp. 451-472
    • Ilinca, F.1    Hétu, J.-F.2
  • 131
    • 44149098330 scopus 로고    scopus 로고
    • Three-dimensional numerical simulation of segregation in powder injection molding
    • Ilinca F and Hétu J-F 2008 Three-dimensional numerical simulation of segregation in powder injection molding Int. Polym. Process. 23 208-15
    • (2008) Int. Polym. Process. , vol.23 , Issue.2 , pp. 208-215
    • Ilinca, F.1    Hétu, J.-F.2
  • 133
    • 79953648882 scopus 로고    scopus 로고
    • CetaTech PIMsolver available at: http://www.cetatech.com/english/sub-03/ index.php?a-page=3&b-page=4
  • 134
    • 47249137832 scopus 로고    scopus 로고
    • The demolding of powder injection molded micro-structures: Analysis, simulation and experiment
    • Fu G, Tor S B, Loh N H, Tay B Y and Hardt D E 2008 The demolding of powder injection molded micro-structures: analysis, simulation and experiment J. Micromech. Microeng. 18 075024
    • (2008) J. Micromech. Microeng. , vol.18 , Issue.7 , pp. 075024
    • Fu, G.1    Tor, S.B.2    Loh, N.H.3    Tay, B.Y.4    Hardt, D.E.5
  • 135
    • 54249090206 scopus 로고    scopus 로고
    • Constitutive modelling of microstructured components fabricated by micro powder injection molding
    • Liu L, Loh N H, Tay B Y, Tor S B, Murakoshi Y and Maeda R 2008 Constitutive modelling of microstructured components fabricated by micro powder injection molding Acta. Mater. 56 5560-6
    • (2008) Acta. Mater. , vol.56 , Issue.19 , pp. 5560-5566
    • Liu, L.1    Loh, N.H.2    Tay, B.Y.3    Tor, S.B.4    Murakoshi, Y.5    Maeda, R.6
  • 137
    • 0037047817 scopus 로고    scopus 로고
    • Improving mould design and injection parameters in metal injection moulding by accurate 3D finite element simulation
    • DOI 10.1016/S0924-0136(02)00307-2, PII S0924013602003072
    • Barrière T, Gelin J C and Liu B 2002 Improving mould design and injection parameters in metal injection moulding by accurate 3D finite element simulation J. Mater. Process. Technol. 125-126 518-24 (Pubitemid 34991981)
    • (2002) Journal of Materials Processing Technology , vol.125-126 , pp. 518-524
    • Barriere, T.1    Gelin, J.C.2    Liu, B.3
  • 139
    • 0035758132 scopus 로고    scopus 로고
    • Experimental and numerical investigations on properties and quality of parts produced by MIM
    • Barriere T, Gelin J C and Liu B 2001 Experimental and numerical investigations on properties and quality of parts produced by MIM Powder Metall. 44 228-34
    • (2001) Powder Metall. , vol.44 , Issue.3 , pp. 228-234
    • Barriere, T.1    Gelin, J.C.2    Liu, B.3
  • 141
    • 79551573793 scopus 로고    scopus 로고
    • Effects of material improvement and injection moulding tool design on the movability of sintered two-component micro parts
    • Ruh A, Piotter V, Plewa K, Ritzhaupt-Kleissl H-J and Hauelt J 2010 Effects of material improvement and injection moulding tool design on the movability of sintered two-component micro parts Microsyst. Technol. at press, doi: 10.1007/s00542-010-1128-3
    • (2010) Microsyst. Technol.
    • Ruh, A.1    Piotter, V.2    Plewa, K.3    Ritzhaupt-Kleissl, H.-J.4    Hauelt, J.5
  • 142
    • 0037365010 scopus 로고    scopus 로고
    • Fabrication of micromolds for gearwheels by micro powder injection molding
    • Gietzelt T, Piotter V, Jacobi O, Ruprecht R and Hausselt J 2003 Fabrication of micromolds for gearwheels by micro powder injection molding Adv. Eng. Mater. 5 139-45
    • (2003) Adv. Eng. Mater. , vol.5 , Issue.3 , pp. 139-145
    • Gietzelt, T.1    Piotter, V.2    Jacobi, O.3    Ruprecht, R.4    Hausselt, J.5
  • 143
    • 0042815834 scopus 로고    scopus 로고
    • Outstanding features of powder injection molding for micro parts manufacturing
    • Yoshikawa K and Ohmori H 2001 Outstanding features of powder injection molding for micro parts manufacturing RIKEN Rev. 34 13-8
    • (2001) RIKEN Rev. , vol.34 , pp. 13-18
    • Yoshikawa, K.1    Ohmori, H.2
  • 144
    • 77950865452 scopus 로고    scopus 로고
    • Replication and characterization of 316L stainless steel micro-mixer by micro powder injection molding
    • Meng J, Loh N H, Fu G, Tor S B and Tay B Y 2010 Replication and characterization of 316L stainless steel micro-mixer by micro powder injection molding J. Alloys Compd. 496 293-9
    • (2010) J. Alloys Compd. , vol.496 , Issue.1-2 , pp. 293-299
    • Meng, J.1    Loh, N.H.2    Fu, G.3    Tor, S.B.4    Tay, B.Y.5
  • 145
    • 79953654802 scopus 로고    scopus 로고
    • High-resistive micro components produced by high-pressure powder injection moulding
    • Piotter V, Finnah K, Plewa R, Ruprecht R and Hausselt J 2005 High-resistive micro components produced by high-pressure powder injection moulding Proc. 4M Int. Conf. (Amsterdam: Elsevier) pp 207-10
    • (2005) Proc. 4M Int. Conf. , pp. 207-210
    • Piotter, V.1    Finnah, K.2    Plewa, R.3    Ruprecht, R.4    Hausselt, J.5


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.