Self-adhesive resin cements - chemistry, properties and clinical considerations

Journal of Oral Rehabilitation

Volumn 38, Issue 4, 2011, Pages 295-314

  Ferracane, J L ^a   Stansbury, J W ^b   Burke, F J T ^c  

^a OREGON HEALTH AND SCIENCE UNIVERSITY   (United States)

^b UNIVERSITY OF COLORADO   (United States)

^c UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

Clinical performance; Dental cement; Properties; Self adhesive; Self etch

Indexed keywords

ACRYLIC ACID RESIN; BIOMATERIAL; METHACRYLIC ACID DERIVATIVE; RESIN; RESIN CEMENT; TOOTH CEMENT;

CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; ENDODONTICS; HUMAN; METHODOLOGY; PHYSICAL CHEMISTRY; REVIEW;

ACID ETCHING, DENTAL; ACRYLIC RESINS; BIOCOMPATIBLE MATERIALS; COMPOSITE RESINS; DENTAL BONDING; DENTAL CEMENTS; DENTAL MARGINAL ADAPTATION; HUMANS; METHACRYLATES; PHYSICOCHEMICAL PHENOMENA; RESIN CEMENTS;

EID: 79952431919     PISSN: 0305182X     EISSN: 13652842     Source Type: Journal    
DOI: 10.1111/j.1365-2842.2010.02148.x     Document Type: Review

References (99)

1. Radovic I, Monticelli F, Goracci C, Vulicevic ZR, Ferrari M. Self-adhesive resin cements: a literature review. J Adhes Dent. 2008;10:251-258.
2. Bowen RL. Development of a silica-resin direct filling material. National Bureau of Standards, 1958 Report 6333, Gaithersburg, MD, USA.
3. Bowen RL. Dental filling material comprising vinyl silane treated fused silica and a binder consisting of the reaction product of bisphenol and glycidyl acrylate. 1962; USP No. 3, 066, 112.
4. Bowen RL. Properties of a silica-reinforced polymer for dental restorations. J Am Dent Assoc. 1963;66:57-64.
5. Bowen RL. Method of preparing a monomer having phenoxy and methacrylate groups linked by hydroxy glyceryl groups. 1965; USP No. 3, 179, 623.
6. Buonocore MG. Simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res. 1955;34:849-853.
7. Smith DC. A new dental cement. Br Dent J. 1968;124:381-384.
8. Wilson AD, Kent BE. The glass ionomer cement: a new translucent dental filling material. J Appl Chem Biotechnol. 1971;21:313-320.
9. Antonucci JM. Formulation and evaluation of resin modified glass ionomer cements. Trans Soc Biomater. 1987;13:225.
10. Mathis RS, Ferracane JL. Properties of a glass-ionomer/resin-composite hybrid material. Dent Mater. 1989;5:355-358.
11. Wilson AD. Resin-modified glass-ionomer cements. Int J Prosthodont. 1990;3:425-429.
12. Mitra SB. Adhesion to dentin and physical properties of a light-cured glass-ionomer liner/base. J Dent Res. 1991;70:72-77.
13. Fu BP, Sun XM, Qian WX, Shen YQ, Chen RR, Hannig M. Evidence of chemical bonding to hydroxyapatite by phosphoric acid esters. Biomaterials. 2005;26:5104-5110.
14. Nagakane K, Yoshida Y, Hirata I, Fukuda R, Nakayama Y, Shirai K et al. Analysis of chemical interaction of 4-MET with hydroxyapatite using XPS. Dent Mater J. 2006;25:645-649.
15. Van Landuyt KL, Yoshida Y, Hirata I, Snauwaert J, De Munck J, Okazaki M et al. Influence of the chemical structure of functional monomers on their adhesive performance. J Dent Res. 2008;87:757-761.
16. Nicholson JW. Polyacid-modified composite resins ("compomers") and their use in clinical dentistry. Dent Mater. 2007;23:615-622.
17. Martin R, Paul SJ, Luthy H, Scharer P. Dentin bond strength of Dyract Cem. Am J Dent. 1997;10:27-31.
18. Moodley D, Grobler SR, Rossouw RJ, Oberholzer TG, Patel N. In vitro evaluation of two adhesive systems used with compomer filling materials. Int Dent J. 2000;50:400-406.
19. Shaw AJ, Carrick T, McCabe JF. Fluoride release from glass-ionomer and compomer restorative materials: 6-month data. J Dent. 1998;26:355-359.
20. Grobler SR, Rossouw RJ, Kotze TJV. A comparison of fluoride release from various dental materials. J Dent. 1998;26:259-265.
21. Yoshida Y, Nagakane K, Fukuda R, Nakayama Y, Okazaki M, Shintani H et al. Comparative study on adhesive performance of functional monomers. J Dent Res. 2004;83:454-458.
22. Inoue S, Koshiro K, Yoshida Y, De Munck J, Nagakane K, Suzuki K et al. Hydrolytic stability of self-etch adhesives bonded to dentin. J Dent Res. 2005;84:1160-1164.
23. Belli R, Pelka M, Petschelt A, Lohbauer U. In vitro wear gap formation of self-adhesive resin cements: a CLSM evaluation. J Dent. 2009;37:984-993.
24. Moszner N, Salz U. Recent developments of new components for dental adhesives and composites. Macromol Mater Eng. 2007;292:245-271.
25. Pavlinec J, Moszner N. Monomers for adhesive polymers, 8(a) crosslinking polymerization of selected N-substituted bis(acrylamide)s for dental filling materials. J Appl Polym Sci. 2009;113:3137-3145.
26. Catel Y, Degrange M, Le Pluart L, Madec PJ, Pham TN, Picton L. Synthesis, photopolymerization and adhesive properties of new hydrolytically stable phosphonic acids for dental applications. J Polym Sci A Polym Chem. 2008;46:7074-7090.
27. Catel Y, Degrange M, Le Pluart L, Madec PJ, Pham TN, Chen F et al. Synthesis, photopolymerization, and adhesive properties of new bisphosphonic acid monomers for dental application. J Polym Sci A Polym Chem. 2009;47:5258-5271.
28. Salz U, Zimmermann J, Zeuner F, Moszner N. Hydrolytic stability of self-etching adhesive systems. J Adhes Dent. 2005;7:107-116.
29. Antonucci JM, Fowler BO, Weir MD, Skrtic D, Stansbury JW. Effect of ethyl-alpha-hydroxymethylacrylate on selected properties of copolymers and ACP resin composites. J Mater Sci: Mater Med. 2008;19:3263-3271.
30. Klee JE, Lehmann U. Dental adhesive composition comprising polymer. 2008; Eur Pat Appl EP 1911434.
31. Kumbuloglu O, Lassila LV, User A, Vallittu PK. A study of the physical and chemical properties of four resin composite luting cements. Int J Prosthodont. 2004;17:357-363.
32. Vrochari AD, Eliades G, Hellwig E, Wrbas K-T. Curing efficiency of four self-etching, self-adhesive resin cements. Dent Mater. 2009;25:1104-1108.
33. Suh BI, Feng L, Pashley DH, Tay FR. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers. J Adhes Dent. 2003;5:267-282.
34. Han L, Okamoto A, Fukushima M, Okiji T. Evaluation of physical properties and surface degradation of self-adhesive resin cements. Dent Mater J. 2007;26:906-914.
35. Cantoro A, Goracci C, Papacchini F, Mazzitelli C, Fadda GM, Ferrari M. Effect of pre-cure temperature on the bonding potential of self-etch and self-adhesive resin cements. Dent Mater. 2008;24:577-583.
36. Spinell T, Schedle A, Watts DC. Polymerization shrinkage kinetics of dimethacrylate resin-cements. Dent Mater. 2009;25:1058-1066.
37. Gerth HUB, Dammaschke T, Zuchner H, Schafer E. Chemical analysis and bonding reaction of RelyX Unicem and Bifix composites - a comparative study. Dent Mater. 2006;22:934-941.
38. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater. 2004;20:963-971.
39. Al-Assaf K, Chakmakchi M, Palaghias G, Karanika-Kouma A, Eliades G. Interfacial characteristics of adhesive luting resins and composites with dentine. Dent Mater. 2007;23:829-839.
40. Monticelli F, Osorio R, Mazzitelli C, Ferrari M, Toledano M. Limited decalcification/diffusion of self-adhesive cements into dentin. J Dent Res. 2008;87:974-979.
41. Piwowarczyk A, Lauer H-C. Mechanical properties of luting cements after water storage. Oper Dent. 2003;28:535-542.
42. Behr M, Rosentritt M, Loher H, Kolbeck C, Templer C, Stemplinger B et al. Changes of cement properties caused by mixing errors: the therapeutic range of different cement types. Dent Mater. 2008;24:1187-1193.
43. Black MA, Bayne SC, Peterson CA, Smith LR, Thompson JY. Effect of power toothbrushing on simulated wear of dental cement margins. J Dent Hyg. 2007;81:1-12.
44. Yip HK, To WM, Smales RJ. Effects of artificial saliva and APF gel on the surface roughness of newer glass ionomer cements. Oper Dent. 2004;29:661-668.
45. Wan Bakar W, McIntyre J. Susceptibility of selected tooth-coloured dental materials to damage by common erosive acids. Aust Dent J. 2008;53:226-234.
46. Walter R, Miguez PA, Pereira PN. Microtensile bond strength of luting materials to coronal and root dentin. J Esthet Restor Dent. 2005;17:165-171.
47. Escribano N, de la Macorra J. Microtensile bond strength of self-adhesive luting cements to ceramic. J Adhes Dent. 2006;8:337-341.
48. Goracci C, Cury AH, Cantoro A, Papacchini F, Tay FR, Ferrari M. Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces. J Adhes Dent. 2006;8:327-335.
49. Yang B, Ludwig K, Adelung R, Kern M. Micro-tensile bond strength of three luting resins to human regional dentin. Dent Mater. 2006;22:45-56.
50. Hikita K, Van Meerbeek B, De Munck J, Ikeda T, Van Landuyt K, Maida T et al. Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater. 2007;23:71-80.
51. Sarr M, Mine A, De Munck J, Cardoso MV, Kane AW, Vreven J et al. Immediate bonding effectiveness of contemporary composite cements to dentin. Clin Oral Investig. 2010;14:569-577.
52. Abo-Hamar SE, Hiller K-A, Jung H, Federlin M, Friedl K-H, Schmalz G. Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel. Clin Oral Invest. 2005;9:161-167.
53. Piwowarczyk A, Bender R, Ottl P, Lauer HC. Long-term bond between dual-polymerizing cementing agents and human hard dental tissue. Dent Mater. 2007;23:211-217.
54. Toman M, Toksavul S, Akin A. Bond strength of all-ceramics to tooth structure using new luting systems. J Adhes Dent. 2008;10:373-378.
55. Holderegger C, Sailer I, Schuhmacher C, Schläpfer R, Hämmerle C, Fischer J. Shear bond strength of resin cements to human dentin. Dent Mater. 2008;24:944-950.
56. Lührs AK, Guhr S, Günay H, Geurtsen W. Shear bond strength of self-adhesive resins compared to resin cements with etch and rinse adhesives to enamel and dentin in vitro. Clin Oral Invest. 2010;14:193-199.
57. Bitter K, Paris S, Pfuertner C, Neumann K, Kielbassa AM. Morphological and bond strength evaluation of different resin cements to root dentin. Eur J Oral Sci. 2009;117:326-333.
58. Ernst C-P, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent. 2005;93:551-558.
59. Piwowarczyk A, Lauer H-C, Sorensen JA. The shear bond strength between luting cements and zirconia ceramics after two pre-treatments. Oper Dent. 2005;30:382-388.
60. Kumbuloglu O, Lassila LV, User A, Vallittu PK. Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper Dent. 2006;31:248-255.
61. Lüthy H, Loeffel O, Hammerle CH. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater. 2006;22:195-200.
62. Blatz MB, Chiche G, Holst S, Sadan A. Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia. Quintessence Int. 2007;38:745-753.
63. Blatz MB, Park J-H, Ozer F, Mante FK, Saleh N, Bergler M et al. In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion. Clin Oral Invest. 2010;14:187-192.
64. Wolfart M, Wolfart S, Kern M. Retention forces and seating discrepancies of implant-retained castings after cementation. Int J Oral Maxillofac Implants. 2006;21:519-525.
65. Vicente A, Bravo LA, Romero M, Ortiz AJ, Canteras M. A comparison of the shear bond strength of a resin cement and two orthodontic resin adhesive systems. Angle Orthod. 2005;75:109-113.
66. Bishara SE, Ostby AW, Ajlouni R, Laffoon JF, Warren JJ. Early shear bond strength of a one-step self-adhesive on orthodontic brackets. Angle Orthod. 2006;76:689-693.
67. Bott B, Hannig M. Effect of different luting materials on the marginal adaptation of class I ceramic inlay restorations in vitro. Dent Mater. 2003;19:264-269.
68. Rosentritt M, Behr M, Lang R, Handel G. Influence of cement type on the marginal adaptation of all-ceramic MOD inlays. Dent Mater. 2004;20:463-469.
69. Frankenberger R, Lohbauer U, Schaible RB, Nikolaenko SA. Luting of ceramic inlays in vitro: marginal quality of self-etch and etch-and-rinse adhesives versus self-etch cements. Dent Mater. 2008;24:185-191.
70. Behr M, Rosentritt M, Regnet T, Lang R, Handel G. Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems. Dent Mater. 2004;20:191-197.
71. Piwowarczyk A, Lauer H-C, Sorensen JA. Microleakage of various cementing agents for full cast crowns. Dent Mater. 2005;21:445-453.
72. Ibarra G, Johnson GH, Geurtsen W, Vargas MA. Microleakage of porcelain veneer restorations bonded to enamel and dentin with a new self-adhesive resin-based dental cement. Dent Mater. 2007;23:218-225.
73. Ngo Uy JN, Lian JN, Nicholls JI, Tan KB. Load-fatigue performance of gold crowns luted with resin cements. J Prosthet Dent. 2006;95:315-322.
74. Burke FJ, Fleming GJ, Abbas G, Richter B. Effectiveness of a self-adhesive resin luting system on fracture resistance of teeth restored with dentin-bonded crowns. Eur J Prosthodont Restor Dent. 2006;14:185-188.
75. Miyaura K, Matsuka Y, Morita M, Yamashita A, Watanabe T. Comparison of biting forces in different age and sex groups: a study of biting efficiency with mobile and non-mobile teeth. J Oral Rehabil. 1999;26:223-227.
76. Blatz MB, Chiche G, Holst S, Sadan A. Influence of cementation technique on fracture strength and leakage of alumina all-ceramic crowns after cyclic loading. Quint Int. 2008;39:23-32.
77. Preuss A, Rosentritt M, Frankenberger R, Beuer F, Naumann M. Influence of type of luting cement used with all-ceramic crowns on load capability of post-restored endodontically treated maxillary central incisors. Clin Oral Invest. 2008;12:151-156.
78. De Souza Costa CA, Hebling J, Randall RC. Human pulp response to resin cements used to bond inlay restorations. Dent Mater. 2006;22:954-962.
79. Ulker H, Sengun A. Cytotoxicity evaluation of self adhesive composite resin cements by dentin barrier test on 3D pulp cells. Eur J Dent. 2009;3:120-126.
80. De Mendonça AA, Souza PP, Hebling J, Costa CA. Cytotoxic effects of hard-setting cements applied on the odontoblast cell line MDPC-23. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2007;104:e102-e108.
81. Christensen GJ. The rise of resin for cementing restorations. J Am Dent Assoc. 1993;124:104-105.
82. Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: a review of the literature. J Prosthet Dent. 1998;30: 280-301.
83. Zidan O, Ferguson GC. The retention of complete crowns prepared with three different tapers and luted with four different cements. J Prosthet Dent. 2003;89:565-571.
84. Burke FJT, Liebler M, Eliades G, Randall RC. Ease of use versus clinical effectiveness of restorative materials. Quintessence Int. 2001;32:239-242.
85. Brunton PA, Christensen GJ, Cheung S-W, Burke FJT, Wilson NHF. Contemporary dental practice in the UK: indirect restorations and fixed prosthodontics. Br Dent J. 2005;198:99-103.
86. Mandel ID. Clinical research - the silent partner in dental practice. Quintessence Int. 1993;24:453-463.
87. Burke FJT, McCord JF. Research in dental practice - problems and solutions. Br Dent J. 1993;175:396-398.
88. Hilton T, Hilton D, Randall R, Ferracane JL. A clinical comparison of two cements for levels of post-operative sensitivity in a practice-based setting. Oper Dent. 2004;29:241-248.
89. Burke FJT, Crisp RJ, Balkenhol M, Bell T, Lamb J, McDermott K et al. Two-year evaluation of restorations of a packable composite placed in UK general dental practices. Br Dent J. 2005;199:293-298.
90. Crisp RJ, Cowan AJ, Lamb J, Thompson O, Tulloch N, Burke FJT. A clinical evaluation of all-ceramic bridges placed in UK general dental practices: first year results. Br Dent J. 2008;205:477-484.
91. Burke FJT, Crisp RJ, Richter B. A practice-based evaluation of the handling of a new self-adhesive universal resin luting material. Int Dent J. 2006;56:142-146.
92. Christensen GJ. Clinical Research Associates. CRA Newsl. 2003;27:4.
93. Christensen GJ. Clinical Research Associates. CRA Newsl. 2003;27:1-2.
94. Crisp RJ, Burke FJT. Two-year performance of restorations placed with a self-adhesive luting material. IADR Brisbane 2006. Abstract 2098
95. Taschner M, Frankenberger R, Garcia-Godoy F, Rosenbusch S, Petschelt A, Kramer N. IPS Empress inlays luted with a self-adhesive resin cement after 1year. Am J Dent. 2009;2:55-59.
96. Behr M, Rosentritt M, Wimmer J, Lang R, Kolbeck C, Burgers R et al. Self-adhesive resin cement versus zinc phosphate luting material: a prospective clinical trial begun 2003. Dent Mater. 2009;25:601-604.
97. Trajtenberg CP, Caram SJ, Kiat-amnuay S. Microleakage of all-ceramic crowns using self-etching resin luting agents. Oper Dent. 2008;33:392-399.
98. Burke FJT, Fleming GJ, Windmueller B. Fracture strength of dentin-bonded crowns luted with a self-adhesive resin luting material. AADR 2003. Abstract 1651.
99. Johnson GH, Lepe X, Zhang H, Wataha JC. Retention of metal-ceramic crowns with contemporary dental cements. J Am Dent Assoc. 2009;140:1125-1136.