Self-adhesive resin cements: A literature review

Journal of Adhesive Dentistry

Volumn 10, Issue 4, 2008, Pages 251-258

  Radovic, Ivana ^a,b   Monticelli, Francesca ^c   Goracci, Cecilia ^b   Vulicevic, Zoran R ^a   Ferrari, Marco ^b  

^a UNIVERSITY OF BELGRADE   (Serbia)

^b UNIVERSITY OF SIENA   (Italy)

^c UNIVERSITY OF ZARAGOZA   (Spain)

Author keywords

Review; Self adhesive cements

Indexed keywords

BIOMATERIAL; BIOMEDICAL AND DENTAL MATERIALS; MAXCEM; PANAVIA FLUORO; PANAVIA-FLUORO; RELY X UNICEM; RESIN CEMENT;

ADHESION; DENTAL BONDING; DENTAL CARE; DENTIN; ENAMEL; ENDODONTICS; REVIEW; TOOTH DISEASE;

ADHESIVENESS; BIOCOMPATIBLE MATERIALS; DENTAL BONDING; DENTAL ENAMEL; DENTAL LEAKAGE; DENTAL MATERIALS; DENTAL STRESS ANALYSIS; DENTIN; MARGINAL ADAPTATION (DENTISTRY); RESIN CEMENTS;

EID: 51449087768     PISSN: 14615185     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (53)

1. Abo-Hamar SE, Hiller KA, Jung H, Federlin M, Friedl KH, Schmalz G. Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel. Clin Oral Investig 2005;9:161-167.
2. Al-Assaf K, Chakmakchi M, Palaghias G, Karanika-Kouma A, Eliades G. Interfacial characteristics of adhesive luting resins and composites with dentine. Dent Mater 2007;23:829-839.
3. Balbosh A, Ludwig K, Kern M. Comparison of titanium dowel retention using four different luting agents. J Prosthet Dent 2005;94:227-233.
4. Baldissara P, Valandro LF, Monaco C, Ferrari M, Bottino MA, Scotti R. Fatigue resistance of the bond of a glass-infiltrated alumina ceramic to human dentin. J Adhes Dent 2006;8:97-104.
5. Bateman GJ, Lloyd CH, Chadwick RG, Saunders WP. Retention of quartzfibre endodontic posts with a self-adhesive dual cure resin cement. Eur J Prosthodont Rester Dent 2005;13:33-37.
6. Behr M, Rosentritt M, Regnet T, Lang R, Handel G. Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems. Dent Mater 2004;20:191-197.
7. Bishara SE, Ajlouni R, Laffoon JF, Warren JJ. Comparison of shear bond strength of two self-etch primer/adhesive systems. Angle Orthod 2006;76:123-126.
8. Bishara SE, Ostby AW, Ajlouni R, Laffoon JF, Warren JJ. Early shear bond strength of a one-step self-adhesive on orthodontic brackets. Angle Orthod 2006;76:689-693.
9. Bitter K, Meyer-Lueckel H, Priehn K, Kanjuparambil JP, Neumann K, Kielbassa AM. Effects of luting agent and thermocycling on bond strengths to root canal dentine, Int Endod J 2006;39:809-818.
10. Bitter K, Priehn K, Martus P, Kielbassa AM. In vitro evaluation of push-out bond strengths of various luting agents to tooth-colored posts. J Prosthet Dent 2006;95:302-310.
11. Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the litera-ture. J Prosthet Dent 2003;89:268-274.
12. Burke FJ, Crisp RJ, Richter B. A practice-based evaluation of the handling of a new self-adhesive universal resin luting material, Int Dent J 2006;56:142-146.
13. Burke FJ, Fleming GJ, Abbas G, Richter B. Effectiveness of a self-adhesive resin luting system on fracture resistance of teeth restored with dentin-bonded crowns. Eur J Prosthodont Restor Dent 2006;14:185-188.
14. Burke FM, Ray NJ, McConnell RJ. Fluoride-containing restorative materials, Int Dent J 2006;56:33-43.
15. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater 2004;20:963-971.
16. de Souza Costa CA, Hebling J, Randall RC. Human pulp response to resin cements used to bond inlay restorations. Dent Mater 2006;22:954-962.
17. Diaz-Arnold AM, Vargas MA, Haselton DR. Current status of luting agents for fixed prosthodontics. J Prosthet Dent 1999;1:135-141.
18. Ernst CP, Cohnen U, Stender E, Willershausen B. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 2005;93:551-558.
19. Escribano N, de la Macorra JC. Microtensile bond strength of self-adhesive luting cements to ceramic. J Adhes Dent 2006;8:337-341.
20. Fabianelli A, Goracci C, Bertelli E, Monticelli F, Grandini S, Ferrari M. In vitro evaluation of wall-to-wall adaptation of a self-adhesive resin cement used for luting gold and ceramic inlays. J Adhes Dent 2005;7:33-40.
21. Ferrari M, Mannocci F, Vichi A, Cagidiaco MC, Mjör IA. Bonding to root canal: structural characteristics of the substrate. Am J Dent 2000;13:255-260.
22. Frankenberger R, Lohbauer U, Schaible RB, Nikolaenko SA, Naumann M. Luting of ceramic inlays in vitro: Marginal quality of self-etch and etchand-rinse adhesives versus self-etch cements. Dent Mater 2008;24:185-191.
23. Gerth HU, Dammaschke T, Zürcher H, Schäfer E. Chemical analysis and bonding reaction of RelyX Unicem and Bifix composites-A comparative study. Dent Mater 2006;22:934-941.
24. Goracci C, Cury AH, Cantoro A, Papacchini F, Tay FR, Ferrari M. Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces. J Adhes Dent 2006;8:327-335.
25. Goracci C, Sadek FT, Fabianelli A, Tay FR, Ferrari M. Evaluation of the adhesion of fiber posts to intraradicular dentin. Oper Dent 2005;30:627-635.
26. Hikita K, Van Meerbeek B, De Munck J, Ikeda T, Van Landuyt K, Maida T, Lambrechts P, Peumans M. Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater 2007;23:71-80.
27. Ibarra G, Johnson GH, Geurtsen W, Vargas MA. Microleakage of porcelain veneer restorations bonded to enamel and dentin with a new self-adhesive resin-based dental cement. Dent Mater 2007;23:218-225.
28. Komine F, Tomic M, Gerds T, Strub JR. Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns. J Prosthet Dent 2004;92:359-364.
29. Kumbuloglu O, Lassila LV, User A, Toksavul S, Vallittu PK. Shear bond strength of composite resin cements to lithium disilicate ceramics. J Oral Rehabil 2005;32:128-133.
30. Kumbuloglu O, Lassila LV, User A, Vallittu PK. Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper Dent 2006;31:248-255.
31. Kumbuloglu O, Lassila LV, User A, Vallittu PK. A study of the physical and chemical properties of four resin composite luting cements, Int J Prosthodont 2004;17:357-363.
32. Lüthy H, Loeffel O, Hämmerle CH. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 2006;22:195-200.
33. Mjör IA, Smith MR, Ferrari M, Mannocci F. The structure of dentine in the apical region of human teeth, Int Endod J 2001;34:346-353.
34. Palacios RP, Johnson GH, Phillips KM, Raigrodski AJ. Retention of zirconium oxide ceramic crowns with three types of cement. J Prosthet Dent 2006;96:104-114.
35. Pisani-Proenca J, Erhardt MC, Valandro LF, Gutierrez-Aceves G, Bolanos-Carmona MV, Del Castillo-Salmeron R, Bottino MA. Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic. J Prosthet Dent 2006;96:412-417.
36. Piwowarczyk A, Bender R, Ottl P, Lauer HC. Long-term bond between dual-polymerizing cementing agents and human hard dental tissue. Dent Mater 2007;23:211-217.
37. Piwowarczyk A, Lauer HC. Mechanical properties of luting cements after water storage. Oper Dent 2003;28:535-542.
38. Piwowarczyk A, Lauer HC, Sorensen JA. In vitro shear bond strength of cementing agents to fixed prosthodontic restorative materials. J Prosthet Dent 2004;92:265-273.
39. Piwowarczyk A, Lauer HC, Sorensen JA. Microleakage of various cementing agents for full cast crowns. Dent Mater 2005;21:445-453.
40. Piwowarczyk A, Lauer HC, Sorensen JA. The shear bond strength between luting cements and zirconia ceramics after two pre-treatments. Oper Dent 2005;30:382-388.
41. Reich SM, Wichmann M, Frankenberger R, Zajc D. Effect of surface treatment on the shear bond strength of three resin cements to a machinable feldspatic ceramic. J Biomed Mater Res B Appl Biomater 2005;74:740-746.
42. Rosenstiel SF, Land MF, Crispin BJ. Dental luting agents: A review of the current literature. J Prosthet Dent 1998;80:280-301.
43. Rosentritt M, Behr M, Lang R, Handel G. Influence of cement type on the marginal adaptation of all-ceramic MOD inlays. Dent Mater 2004;20:463-469.
44. Sadek FT, Goracci C, Monticelli F, Grandini S, Cury AH, Tay F, Ferrari M. Immediate and 24-hour evaluation of the interfacial strengths of fiber posts. J Endod 2006;32:1174-1177.
45. Uy JN, Lian JN, Nicholls JI, Tan KB. Load-fatigue performance of gold crowns luted with resin cements. J Prosthet Dent 2006;95:315-322.
46. Vicente A, Bravo LA, Romero M, Ortiz AJ, Ganteras M. A comparison of the shear bond strength of a resin cement and two orthodontic resin adhesive systems. Angle Orthod 2005;75:109-113.
47. Walter R, Miguez PA, Pereira PN. Microtensile bond strength of luting materials to coronal and root dentin. J Esthet Restor Dent 2005;17:165-171.
48. Wiegand A, Buchalla W, Attin T. Review on fluoride-releasing restorative materials-fluoride release and uptake characteristics, antibacterial activity and influence on caries formation. Dent Mater 2007;23:343-362.
49. Wilson AD, Prosser HJ, Powis DM. Mechanism of adhesion of polyelectrolyte cements to hydroxyapatite. J Dent Res 1983;62:590-592.
50. Wolfart M, Wolfart S, Kern M. Retention forces and seating discrepancies of implant-retained castings after cementation. The International journal of oral & maxillofacial implants 2006;21:519-525.
51. Yang B, Ludwig K, Adelung R, Kern M. Micro-tensile bond strength of three luting resins to human regional dentin. Dent Mater 2006;22:45-56.
52. Yoshida Y, Nagakane K, Fukuda R, Nakayama Y, Okazaki M, Shintani H, lnoue S, Tagawa Y, Suzuki K, De Munck J, Van Meerbeek B. Comparative study on adhesive performance of functional monomers. J Dent Res 2004;83:454-458.
53. Yoshida Y, Van Meerbeek B, Nakayama Y, Snauwaert J, Hellemans L, Lambrechts P, Vanherle G, Wakasa K. Evidence of chemical bonding at biomaterial-hard tissue interfaces. J Dent Res 2000;79:709-714.